Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanoscale devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Carbon Nanotubes Based Quantum Devices

This document represents the final report for the NASA cooperative agreement which studied the application of carbon nanotubes. The accomplishments are reviewed: (1) Wrote a review article on carbon nanotubes and its potentials for applications in nanoscale quantum devices. (2) Extensive studies on the effects of structure deformation on nanotube electronic structure and energy band gaps. (3) Calculated the vibrational spectrum of nanotube rope and the effect of pressure. and (4) Investigate the properties of Li intercalated nanotube ropes and explore their potential for energy storage materials and battery applications. These studies have lead to four publications and seven abstracts in international conferences.

Lu, Jian-Ping↗
DOE OSTI2020

Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques

The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with sub-nanometer precision, typically for quantum physics demonstrations, and to dope silicon past the solid-solubility limit, with potential applications in microelectronics and plasmonics. However, this process, which we call atomic precision advanced manufacturing (APAM), currently lacks the throughput required to develop sophisticated applications because there is no proven scalable hydrogen lithography pathway. Here, we demonstrate and characterize an APAM device workflow where STM lithography has been replaced with photolithography. An ultraviolet laser is shown to locally heat silicon controllably above the temperature required for hydrogen depassivation. STM images indicate a narrow range of laser energy density where hydrogen has been depassivated, and the surface remains well-ordered. A model for photothermal heating of silicon predicts a local temperature which is consistent with atomic-scale STM images of the photo-patterned regions. Finally, a simple device made by exposing photo-depassivated silicon to phosphine is found to have a carrier density and mobility similar to that produced by similar devices patterned by STM.

42 ENGINEERING↗
DOE OSTI2021

Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques

The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with subnanometer precision, typically for quantum physics experiments. This process, which we call atomic precision advanced manufacturing (APAM), dopes silicon beyond the solid-solubility limit and produces electrical and optical characteristics that may also be useful for microelectronic and plasmonic applications. However, scanned probe lithography lacks the throughput required to develop more sophisticated applications. In this work, we demonstrate and characterize an APAM device workflow where scanned probe lithography of the atomic layer resist has been replaced by photolithography. An ultraviolet laser is shown to locally and controllably heat silicon above the temperature required for hydrogen depassivation on a nanosecond timescale, a process resistant to under- and overexposure. STM images indicate a narrow range of energy density where the surface is both depassivated and undamaged. Modeling that accounts for photothermal heating and the subsequent hydrogen desorption kinetics suggests that the silicon surface temperatures reached in our patterning process exceed those required for hydrogen removal in temperature-programmed desorption experiments. A phosphorus-doped van der Pauw structure made by sequentially photodepassivating a predefined area and then exposing it to phosphine is found to have a similar mobility and higher carrier density compared with devices patterned by STM. Lastly, it is also demonstrated that photodepassivation and precursor exposure steps may be performed concomitantly, a potential route to enabling APAM outside of ultrahigh vacuum.

nanoscale devices↗
DOE OSTI2022

Two-band optical gain and ultrabright electroluminescence from colloidal quantum dots at 1000 A cm−2

Abstract Colloidal quantum dots (QDs) are attractive materials for the realization of solution-processable laser diodes. Primary challenges towards this objective are fast optical-gain relaxation due to nonradiative Auger recombination and poor stability of colloidal QD solids under high current densities required to obtain optical gain. Here we resolve these challenges and achieve broad-band optical gain spanning the band-edge (1S) and the higher-energy (1P) transitions. This demonstration is enabled by continuously graded QDs with strongly suppressed Auger recombination and a current-focusing device design, combined with short-pulse pumping. Using this approach, we achieve ultra-high current densities (~1000 A cm −2 ) and brightness (~10 million cd m −2 ), and demonstrate an unusual two-band electroluminescence regime for which the 1P band is more intense than the 1S feature. This implies the realization of extremely large QD occupancies of up to ~8 excitons per-dot, which corresponds to complete filling of the 1S and 1P electron shells.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Needle-Like Ferroelastic Domains in Individual Ferroelectric Nanoparticles

Superior structural, physical and electronic properties make ferroelectric nanocrystals essential in enabling a range of next-generation devices. Ferroelectric responses are determined by crystal structure and domain morphology. The ability to reversibly displace, create and annihilate elastic domains is critical to device applications. Whereas electric-field control has been demonstrated for ferroelectric 180° surface domain walls and vortices, similar control of ferroelastic domains and domain boundaries within individual nanocrystals remains challenging. Using controlled external compressive and tensile axial stress, deterministic and reversible control of highly mobile ferroelastic domains and axial polarization in three dimensions is demonstrated in this study. While many studies exist on ferroelastic domains in thin films and bulk, little is known about ferroelastic interactions at the single nanoparticle level, especially involving domain boundaries. Through combining Bragg coherent X-ray diffractive imaging and Landau theory, strain gradients in individual BaTiO3 nanocrystals are shown to stabilize needle-like ferroelastic twin domains. These domains are highly labile under applied axial stress, producing a locally enhanced electric polarization mediated by a ferroelectric phase transition. The efficacy of Bragg coherent X-ray diffractive imaging in studying in operando domains in three-dimensions is demonstrated, while synergy with theory provides a paradigm for domain boundary engineering and potential for nanoscale functional devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring the Electronic Structures and Spectral Properties of ZnO with Irradiation Defects Generated Under Intense Electronic Excitation: A Combined Experimental and DFT Approach

Here, the relationship between the composition of the internal defect states, spectral properties, and correlated electronic structures of wurtzite zinc oxide (ZnO) crystals under 645 MeV Xe 35+ irradiation is systematically investigated, employing experimental characterizations combined with first-principle calculations. Based on the ion irradiation-induced thermal expansion and relaxation processes, the high concentration of vacancy/interstitial defects produced from the transient disordered phase in molten track states trigger photoelectric changes, as follows: i) the generation of internal defect states effectively reduces the intrinsic bandgap (3.25 eV → 2.66 eV); ii) a large number of defective active sites inhibits the recombination between electron–hole pairs, causing dark conductance and photoconductance to increase with increasing damage levels until optimal fluence is achieved. Based on the density functional theory (DFT) with the GGA + U (GGA = generalized gradient approximation) method, the defective models associated with the different electronic structures, density of states, formation energy, and the nature of the chemical bonding are established. The narrowing of the bandgap observed experimentally and the enhancement of carrier concentration originating from the internal electron defect states are qualitatively verified, therefore laying the foundation for designing future nanoscale photoelectronic devices and microelectronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molybdenum Contacts to MoS 2 Field‐Effect Transistors: Schottky Barrier Extraction, Electrical Transport, and Low‐Frequency Noise

MoS 2 has great interest for nanoscale electronic devices, including transistors and sensors. Defect‐free structure, clean interface with the gate dielectric, and metals with suitable metal–semiconductor junctions are key for reliable devices. Molybdenum is shown as an excellent electrode for MoS 2 field‐effect transistors (FETs), but the correlation among device current, field‐effect mobility, and the low‐frequency noise (LFN) with number of atomic layers is not studied. Furthermore, the impact of Mo/MoS 2 Schottky barrier on electronic injection and scattering in the device needs to be understood. Herein, by studying the FETs with channels of different numbers of atomic‐layer thicknesses, it is shown that a molybdenum metal contact to MoS 2 provides reliable current injection with low Schottky barrier height, low contact resistance, low electron–phonon scattering, and negligible impurity scattering. The mobility and LFN are optimal at a channel thickness of ≈12 atomic layers, which is consistent with the “mobility maximum window” in MoS 2 transistors with prior studies using other contact metals.

Kwon, Jiseok↗
DOE OSTI2020

Tubulin Double Helix: Lateral and Longitudinal Curvature Changes of Tubulin Protofilament

By virtue of their native structures, tubulin dimers are protein building blocks that are naturally pre-programmed to assemble into cytoskeletal polymers known as microtubules (MTs). Here we demonstrate polycation-directed (i.e. electrostatically tunable) assembly of tubulins through tubulin protofilament conformational changes in the longitudinal and lateral directions, creating novel tubulin double helices and various tubular architectures. Synchrotron small angle X-ray scattering and transmission electron microscopy reveal a remarkable range of nanoscale assembly structures: single- and double-layered double-helix tubulin tubules. The phase transitions from MTs into the new assemblies are dependent on the size and concentration of polycations. Two characteristic scales that determine the number of observed phases are the size of polycation compared to the size of tubulin (≈4 nm) and MT diameter (≈25 nm). This work suggests the feasibility of “programmable breakdown” of protein nanotubes, tearing MTs into double-stranded tubulins and building up previously undiscovered nanostructures, by using polycations with scissor- and glue-like properties. Importantly, we define a new role of tubulins as two-dimensionally shape-controllable building blocks for novel supramolecular architectures. Furthermore, these findings provide insight into the design of protein-based functional materials, for example, as metallization templates for nanoscale electronic devices, kinesin motor-driving molecular screws, and anticancer drug delivery vehicles.

2D shape‐control↗
DOE OSTI2024

Electromechanical memcapacitor model offering biologically plausible spiking.

In this article, we introduce a new nanoscale electromechanical device - a leaky memcapacitor - and show that it may be useful for the hardware implementation of spiking neurons. The leaky memcapacitor is a movableplate capacitor that becomes quite conductive when the plates come close to each other. The equivalent circuit of the leaky memcapacitor involves a memcapacitive and memristive system connected in parallel. In the leaky memcapacitor, resistance and capacitance depend on the same internal state variable, which is the displacement of the movable plate. We have performed a comprehensive analysis showing that several types of spiking observed in biological neurons can be implemented with the leaky memcapacitor. Significant attention is paid to the dynamic properties of the model. As in leaky memcapacitors the capacitive, leaking resistive, and reset functionalities are implemented naturally within the same device structure, their use will simplify the creation of spiking neural networks.

Zhang, Zixi↗
DOE OSTI2023

Dislocation-Assisted Quasi-Two-Dimensional Semiconducting Nanochannels Embedded in Perovskite Thin Films

Defect engineering in perovskite thin films has attracted extensive attention recently due to the films’ atomic-scale modification, allowing for remarkable flexibility to design novel nanostructures for next generation nanodevices. However, the defect-assisted three-dimensional nanostructures in thin film matrices usually has large misfit strain and thus causes unstable thin film structures. In contrast, defect-assisted one- or two-dimensional nanostructures embedded in thin films can sustain large misfit strains without relaxation, which make them suitable for defect engineering in perovskite thin films. Here, we reported the fabrication and characterization of edge-type misfit dislocation-assisted two-dimensional BiMnO x nanochannels embedded in SrTiO 3 /La 0.7 Sr 0.3 MnO 3 /TbScO 3 perovskite thin films. The nanochannels are epitaxially grown from the surrounding films without noticeable misfit strain. Diode-like current rectification was spatially observed at nanochannels due to the formation of Schottky junctions between BiMnO x nanochannels and conducting La 0.7 Sr 0.3 MnO 3 thin films. Such atomically scaled heterostructures constitute more flexible ultimate functional units for nanoscale electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Anisotropic Response of Defect Bound States to the Magnetic Field in Epitaxial FeSn Films

Crystal defects, whether intrinsic or engineered, drive many fundamental phenomena and novel functionalities of quantum materials. Here, we report symmetry-breaking phenomena induced by Sn vacancy defects on the surface of epitaxial Kagome antiferromagnetic FeSn films using low-temperature scanning tunneling microscopy and spectroscopy. Near the single Sn vacancy, anisotropic quasiparticle interference patterns are observed in the differential conductance dI/dV maps, breaking the 6-fold rotational symmetry of the Kagome layer. Furthermore, the Sn vacancy defects induce bound states that exhibit anomalous Zeeman shift under an out-of-plane magnetic field, where the energy of the bound states moves linearly toward higher energy independent of the direction of the magnetic field. Under an in-plane magnetic field, the shift of the bound state energy also shows a 2-fold oscillating behavior as a function of the azimuth angle. These findings demonstrate defectenabled new functionalities in Kagome antiferromagnets for potential applications in nanoscale spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

All-inorganic CsPbI 3 perovskite quantum dots have received substantial research interest for photovoltaic applications because of higher efficiency compared to solar cells using other quantum dots materials and the various exciting properties that perovskites have to offer. These quantum dot devices also exhibit good mechanical stability amongst various thin-film photovoltaic technologies. We demonstrate higher mechanical endurance of quantum dot films compared to bulk thin film and highlight the importance of further research on high-performance and flexible optoelectronic devices using nanoscale grains as an advantage. Specifically, we develop a hybrid interfacial architecture consisting of CsPbI 3 quantum dot/PCBM heterojunction, enabling an energy cascade for efficient charge transfer and mechanical adhesion. The champion CsPbI3 quantum dot solar cell has an efficiency of 15.1% (stabilized power output of 14.61%), which is among the highest report to date. Building on this strategy, we further demonstrate a highest efficiency of 12.3% in flexible quantum dot photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2024

Spin transport of a doped Mott insulator in moiré heterostructures

Moiré superlattices of semiconducting transition metal dichalcogenide heterobilayers are model systems for investigating strongly correlated electronic phenomena. Specifically, WSe 2 /WS 2 moiré superlattices have emerged as a quantum simulator for the two-dimensional extended Hubbard model. Experimental studies of charge transport have revealed correlated Mott insulator and generalized Wigner crystal states, but spin transport of the moiré heterostructure has not yet been sufficiently explored. Here, we use spatially and temporally resolved circular dichroism spectroscopy to directly image the spin transport as a function of carrier doping and temperature in WSe 2 /WS 2 moiré heterostructures. We observe diffusive spin transport at all hole concentrations at 11 Kelvin — including the Mott insulator at one hole per moiré unit cell — where charge transport is strongly suppressed. At elevated temperatures the spin diffusion constant remains unchanged in the Mott insulator state, but it increases significantly at finite doping away from the Mott state. The doping- and temperature-dependent spin transport can be qualitatively understood using a t–J model, where spins can move via the hopping of spin-carrying charges and via the exchange interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

All-optical reconfiguration of single silicon-vacancy centers in diamond for non-volatile memories

Strain engineering is vital for tuning the optical and spin properties of solid-state color centers, enhancing spin coherence and compensating emission wavelength shift. Here, we develop an all-optical approach to directly modify the local strain of color centers at the nanoscale by migrating the nearby defect. High-power pulsed optical irradiation triggers defect migration, which subsequently leads to the redistribution of the local crystal lattice of the host material. This redistribution alters the strain experienced by nearby color centers. Using silicon-vacancy centers in diamond, we validate this method and demonstrate a ground state splitting enhancement of up to 1.8 THz. Unlike conventional methods, our approach requires no external fields or nanostructure modifications, enabling non-volatile strain control and optical memory functionality across wide temperature ranges. Its local, permanent nature offers a scalable path for enhancing spin coherence in large-scale quantum systems and has potential applications in photonic machine learning.

Nanoscale devices↗
DOE OSTI2026

A photochargeable semiconductor for highly efficient dehydrogenative coupling of amines

The development of materials with high photocatalytic efficiency is essential for sustainable chemical transformations. Here, in this work, we introduce photochargeable zinc indium sulfide nanocrystals with notable charge storage capacity, enabling highly efficient photocatalytic dehydrogenative coupling of amines. Combined with a nickel cocatalyst, the nanocrystals deliver diamines and hydrogen at rates exceeding 120 mmol per gram of photocatalyst per hour, with > 95% selectivity and an apparent quantum efficiency of up to 39.4% under ambient conditions. The system exhibits excellent scalability, demonstrated by a reaction on a 20-g scale, and broad versatility in promoting amino acid ester coupling and polymerization reactions with concurrent hydrogen evolution. Mechanistic studies attribute the photocharging capability of zinc indium sulfide nanocrystals to in situ-generated trap states such as sulfur vacancies, which extend hydrogen production into the dark catalytic cycle and enhance the overall charge utilization efficiency. These findings position photochargeable semiconductors as promising platforms for a wide range of photocatalytic applications.

nanoscale devices↗
DOE OSTI2024

Manipulating chiral spin transport with ferroelectric polarization

A magnon is a collective excitation of the spin structure in a magnetic insulator and can transmit spin angular momentum with negligible dissipation. This quantum of a spin wave has always been manipulated through magnetic dipoles (that is, by breaking time-reversal symmetry). Here we report the experimental observation of chiral spin transport in multiferroic BiFeO 3 and its control by reversing the ferroelectric polarization (that is, by breaking spatial inversion symmetry). The ferroelectrically controlled magnons show up to 18% modulation at room temperature. The spin torque that the magnons in BiFeO 3 carry can be used to efficiently switch the magnetization of adjacent magnets, with a spin-torque efficiency comparable to the spin Hall effect in heavy metals. Utilizing such controllable magnon generation and transmission in BiFeO 3 , an all-oxide, energy-scalable logic is demonstrated composed of spin-orbit injection, detection and magnetoelectric control. In conclusion, our observations open a new chapter of multiferroic magnons and pave another path towards low-dissipation nanoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells

The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width (n). Recently, 2D/3D heterostructures containing n = 1 and 2 RDPs have produced PSCs with > 25% power conversion efficiency (PCE). Unfortunately, this method does not translate to inverted PSCs due to electron blocking at the 2D/3D interface. Here we report a method to increase the layer width of RDPs in 2D/3D heterostructures in order to address this problem. We discover that bulkier organics form 2D heterostructures more slowly, resulting in wider RDPs; and that small modifications to ligand design induce preferential growth of n ≥ 3 RDPs. Levering these insights, we developed efficient inverted PSCs (certified 23.91% quasi-steady state efficiency). Furthermore, unencapsulated devices operate at room temperature and ~50% relative humidity for over 1000 hrs without loss of PCE; and, when subjected to ISOS-L3 accelerated aging encapsulated devices retain 92% of PCE after 500 hrs.

14 SOLAR ENERGY↗
DOE OSTI2022

Correlated interlayer exciton insulator in heterostructures of monolayer WSe 2 and moiré WS 2 /WSe 2

Moiré superlattices in van der Waals heterostructures have emerged as a powerful tool for engineering quantum phenomena. Here, in this work, we report the observation of a correlated interlayer exciton insulator in a double-layer heterostructure composed of a WSe 2 monolayer and a WS 2 /WSe 2 moiré bilayer that are separated by ultrathin hexagonal boron nitride. The moiré WS 2 /WSe 2 bilayer features a Mott insulator state when the density of holes is one per moiré lattice site. When electrons are added to the Mott insulator in the WS 2 /WSe 2 moiré bilayer and an equal number of holes are injected into the WSe 2 monolayer, a new interlayer exciton insulator emerges with the holes in the WSe 2 monolayer and the electrons in the doped Mott insulator bound together through interlayer Coulomb interactions. The interlayer exciton insulator is stable up to a critical hole density in the WSe 2 monolayer, beyond which the interlayer exciton dissociates. Our study highlights the opportunities for realizing quantum phases in double-layer moiré systems due to the interplay between the moiré flat band and strong interlayer electron interactions.

36 MATERIALS SCIENCE↗