Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Estimating the Single-Trial Characteristics of Event-Related Responses: Evaluation of the MCERP Algorithm

Single-trial event-related responses collected during the course of an experiment are typically averaged before analysis resulting in a rather crude picture of event-related brain dynamics. It has been quite clear for some time that these responses exhibit trial-to-trial variability: however, the computational techniques necessary to deal with such responses in noisy conditions have not been available. To this end we have developed the multiple-component, event-related potential model (mcERP), which assumes that the each event-related response consists of a sum of multiple evoked components each described by a stereotypical waveshape. These waveshapes are allowed to vary in amplitude and onset latency from trial to trial, which allows us to capture, to first-order, the trial-dependent variations in event-related brain dynamics. We have constructed many sets of synthetic data designed to simulate intracortical recordings from a 15 channel, linear-array multielectrode implanted acutely in V1 of an awake-behaving macaque undergoing visual stimulation with a red light flash. This synthetic data was used to characterize the performance of the mcERP algorithm. First we quantified the degree to which such trial-to-trial variability aids in the identification of multiple components, and we demonstrate that amplitude variability is a more important factor in component separation than latency variability. Second, we quantified the behavior of the algorithm under two distinct signal-to-noise ratio (SNR) conditions: Gaussian noise independently present in each channel, and highly correlated (1/f distributed), far-field noise presented identically in each channel of the array. The mcERP algorithm was found to be robust to noise accurately identifying all component waveshapes and their associated single-trial characteristics down to SNR levels of -20dB for Gaussian noise and -7dB for 1/f far-field noise. Comparisons of the performance of this algorithm with factor analysis (FA) and independent component analysis (ICA) will be described by Knuth et al. (SFN abstracts, 2002). In addition, the advantages of application of mcERP to real data will be described by Shah et al, (these abstracts, 2002: SFN abstracts, 2002).

Knuth, K. H.↗

Untangling the recombination line emission from H ii regions with multiple velocity components

H ii regions are the ionized spheres surrounding high-mass stars. They are ideal targets for tracing Galactic structure because they are predominantly found in spiral arms and have high luminosities at infrared and radio wavelengths. In the Green Bank Telescope H ii Region Discovery Survey (GBT HRDS), we found that >30% of first Galactic quadrant H ii regions have multiple hydrogen radio recombination line (RRL) velocities, which makes determining their Galactic locations and physical properties impossible. Here we make additional GBT RRL observations to determine the discrete H ii region velocity for all 117 multiple-velocity sources within 18{sup ∘}<ℓ<65{sup ∘}. The multiple-velocity sources are concentrated in the zone 22{sup ∘}<ℓ<32{sup ∘}, coinciding with the largest regions of massive star formation, which implies that the diffuse emission is caused by leaked ionizing photons. We combine our observations with analyses of the electron temperature, molecular gas, and carbon recombination lines to determine the source velocities for 103 discrete H ii regions (88% of the sample). With the source velocities known, we resolve the kinematic distance ambiguity for 47 regions, and thus determine their heliocentric distances.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of Centaur/Orbiter multiple reaction forces in a full-scale test rig

A multiple component load cell for measuring load is described, and its capability and reliability are evaluated by utilizing it to measure the reaction forces between the Centaur and Centaur Support Structure. The system employs 11 six-component balances in a single test rig to react a combination of loads. The vehicle and balance loads, procedures for fabricating each balance, and the assembly of the balances are discussed. The calibration and testing of the balances are examined. It is noted that the multiple component load cell system is a cost-effective method for obtaining an accurate measurement of friction effects and primary loads.

Mole, Philip J.↗

Tomographic FLEET with a wedge array for multi-point three-component velocimetry

Femtosecond laser electronic excitation tagging (FLEET) velocimetry is an important diagnostic technique for seedless velocimetry measurements particularly in supersonic and hypersonic flows. Typical FLEET measurements feature a single laser line and camera system to achieve one-component velocimetry along a line, although some multiple-spot and multiple-component configurations have been demonstrated. In this work, tomographic imaging is used to track the three-dimensional location of many FLEET spots. A quadscope is used to combine four unique views onto a single high-speed image intensifier and camera. Tomographic reconstructions of the FLEET emission are analyzed for three-component velocimetry from multiple FLEET spots. Glass wedges are used to create many (nine) closely spaced FLEET spots with less than 10% transmission losses. These developments lead to a significant improvement in the dimensionality and spatial coverage of a FLEET instrument with some increases in experimental complexity and data processing. Multiple-point three-component FLEET velocimetry is demonstrated in an underexpanded jet.

47 OTHER INSTRUMENTATION↗

Multidimensional computer simulation of Stirling cycle engines

The computer code ALGAE (algorithms for the gas equations) treats incompressible, thermally expandable, or locally compressible flows in complicated two-dimensional flow regions. The solution method, finite differencing schemes, and basic modeling of the field equations in ALGAE are applicable to engineering design settings of the type found in Stirling cycle engines. The use of ALGAE to model multiple components of the space power research engine (SPRE) is reported. Videotape computer simulations of the transient behavior of the working gas (helium) in the heater-regenerator-cooler complex of the SPRE demonstrate the usefulness of such a program in providing information on thermal and hydraulic phenomena in multiple component sections of the SPRE.

Hall, C. A.↗

A Numerical Method for Calculating the Wave Drag of a Configuration from the Second Derivative of the Area Distribution of a Series of Equivalent Bodies of Revolution

A method based on linearized and slender-body theories, which is easily adapted to electronic-machine computing equipment, is developed for calculating the zero-lift wave drag of single- and multiple-component configurations from a knowledge of the second derivative of the area distribution of a series of equivalent bodies of revolution. The accuracy and computational time required of the method to calculate zero-lift wave drag is evaluated relative to another numerical method which employs the Tchebichef form of harmonic analysis of the area distribution of a series of equivalent bodies of revolution. The results of the evaluation indicate that the total zero-lift wave drag of a multiple-component configuration can generally be calculated most accurately as the sum of the zero-lift wave drag of each component alone plus the zero-lift interference wave drag between all pairs of components. The accuracy and computational time required of both methods to calculate total zero-lift wave drag at supersonic Mach numbers is comparable for airplane-type configurations. For systems of bodies of revolution both methods yield similar results with comparable accuracy; however, the present method only requires up to 60 percent of the computing time required of the harmonic-analysis method for two bodies of revolution and less time for a larger number of bodies.

Levy, Lionel L., Jr.↗

Statistical mechanics and pressure of composite multimoded weakly nonlinear optical systems

Statistical mechanics can provide a versatile theoretical framework for investigating the collective dynamics of weakly nonlinear-wave settings that can be utterly complex to describe otherwise. In optics, composite systems arise due to interactions between different frequencies and polarizations. The purpose of this work is to develop a thermodynamic theory that takes into account the synergistic action of multiple components. We find that the type of the nonlinearity involved can have important implications in the thermalization process and, hence, can lead to different thermal equilibrium conditions. Importantly, we derive closed-form expressions for the actual optomechanical pressure that is exerted on the system. In particular, the total optomechanical pressure is the sum of the partial pressures due to each component. Our results can be applied to a variety of weakly nonlinear optical settings such as multimode fibers, bulk waveguides, photonic lattices, and coupled microresonators. We present two specific examples, where two colors interact in a one-waveguide array with either a cubic or quadratic nonlinearity.

Efremidis, Nikolaos K. (ORCID:0000000298300268)↗

Development of an Innovative Inspection Tool for Superheater Tubes in Fossil Fuel Power Plants

Fossil fuel power plants are complex systems containing multiple components that require periodic health monitoring. Failures in these systems can lead to increased downtime for the plant, reduction of power, and significant cost for repairs. Inspections of the plant’s superheater tubes are typically manual, laborious, and extremely time-consuming. This is due to their small diameter size (between 1.3 and 7.6 cm) and the coiled structure of the tubing. In addition, the tubes are often stacked close to each other, limiting access for external inspection. This paper presents the development and testing of an electrically powered pipe crawler that can navigate inside 5 cm diameter tubes and provide an assessment of their health. The crawler utilizes peristaltic motion within the tubes via interconnected modules for gripping and extending. The modular nature of the system allows it to traverse through straight sections and multiple 90° and 180° bends. Additional modules in the system include an ultrasonic sensor for tube thickness measurements, as well as environmental sensors, a light detecting and ranging (LiDAR) sensor, and camera. Furthermore, these modules utilize a gear system that allows for 360° rotation and provides a means to inspect the entire internal circumference of the tubes.

36 MATERIALS SCIENCE↗

Capturing provenance as a diagnostic tool for workflow performance evaluation and optimization

In extreme-scale computing environments such as the DOE Leadership Computing Facilities scientific workflows are routinely used to coordinate software processes for the execution of complex, computational applications that perform in-silico experiments. Monitoring the performance of workflows without also simultaneously tracking provenance is not sufficient to understand variations between runs, configurations, versions of a code, and between changes in an implemented stack, and systems, i.e. the variability of performance metrics data in their historical context. We take a provenance-based approach and demonstrate that provenance is useful as a tool for evaluating and optimizing workflow performance in extreme-scale HPC environments. We present Chimbuko, a framework for the analysis and visualization of the provenance of performance. Chimbuko implements a method for the evaluation of workflow performance from multiple components that enables the exploration of performance metrics data at scale.

97 MATHEMATICS AND COMPUTING↗

Insights into Spontaneous Solid Electrolyte Interphase Formation at Magnesium Metal Anode Surface from Ab Initio Molecular Dynamics Simulations

Spontaneous chemical reactivity at multivalent (Mg, Ca, Zn, Al) electrode surfaces is critical to solid electrolyte interphase (SEI) formation, and hence, directly affects the longevity of batteries. Here, we report an investigation of the reactivity of 0.5 M Mg(TFSI)2 in 1,2-dimethoxyethane (DME) solvent at a Mg(0001) surface using ab initio molecular dynamics (AIMD) simulations and detailed Bader charge analysis. Based on the simulations, the initial degradation reactions of the electrolyte strongly depend on the structure of the Mg(TFSI)2 species near the anode surface. At the surface, the dissociation of Mg(TFSI)2 species occurs via cleavage of the N-S bond for the solvent separated ion pair (SSIP) and via cleavage of the C-S bond for the contact ion pair (CIP) configuration. In the case of the CIP, both TFSI anions undergo spontaneous bond dissociation reactions to form atomic O, C, S, F, and N species adsorbed on the surface of the Mg anode. These products indicate that the initial SEI layer formed on the surface of the pristine Mg anode consists of a complex mixture of multiple components such as oxides, carbides, sulfides, fluorides, and nitrides. We believe that the atomic level insights gained from these simulations will lay the groundwork for the rational design of tailored and functional interphases that are critical for the success of multivalent battery technology.

Agarwal, Garvit↗

Fluidization of Group A Glass Particles: Experiments and Preliminary Validation

This work is aimed at providing reliable high-quality data from fluidization experiments. Geldart Group A glass beads are used as bed material. The fluidizing medium is air at atmospheric pressure which enters the system at 40% relative humidity. The air inlet velocity is varied over a broad range from 2 U mf to 26 U mf , where the minimum fluidization velocity, U mf , is 0.608 cm/s. There is not a significant change in the mean values of differential pressure; however, there are noticeable trends in their standard deviation values. Preliminary validation studies are performed using the open-source software Multiphase Flow with Interphase eXchanges (MFiX) developed by the National Energy Technology Laboratory (NETL). The results from Eulerian-Eulerian (MFiX-TFM, two-fluid model) and Eulerian-Lagrangian (MFiX-PIC, particle-in-cell) formulations are compared. The work presented in this report highlights the applicability of MFiX-PIC for large-scale applications, and reveals that PIC simulation offers a suitable alternative to TFM simulation when effects due to multiple components or polydispersity are significant. PIC modeling provides a readily extendible framework for such systems. However, PIC models do rely on an empirical closure for inter-particle stress. Some solution discrepancies were evident in MFiX-PIC predictions which require further analysis. As such, the study underlines the need for a systematic approach to quantify the sources of numerical uncertainty within the PIC model. However, even with known empiricism, MFiX-PIC has demonstrated considerable potential in analyzing gas-solid systems. The results obtained are encouraging and warrant further investigation to improve the predictive capability of MFiX-PIC.

36 MATERIALS SCIENCE↗

Multiple emission components in the Cygnus cocoon detected from Fermi -LAT observations

Star-forming regions may play an important role in the life cycle of Galactic cosmic rays (CRs), notably as home to specific acceleration mechanisms and transport conditions. Gamma-ray observations of Cygnus X have revealed the presence of an excess of hard-spectrum gamma-ray emission, possibly related to a cocoon of freshly accelerated particles. We seek an improved description of the gamma-ray emission from the cocoon using ~13 yr of observations with the Fermi-Large Area Telescope (LAT) and use it to further constrain the processes and objects responsible for the young CR population. We developed an emission model for a large region of interest, including a description of interstellar emission from the background population of CRs and recent models for other gamma-ray sources in the field. Thus, we performed an improved spectro-morphological characterisation of the residual emission including the cocoon. The best-fit model for the cocoon includes two main emission components: an extended component FCES G78.74+1.56, described by a 2D Gaussian of extension r 68 = 4.4° ± 0.1° -0.1° +0.1° and a smooth broken power law spectrum with spectral indices 1.67 ± 0.05 -0.01 +0.02 and 2.12 ± 0.02 -0.01 +0.00 below and above 3.0 ± 0.6 -0.2 +0.0 GeV, respectively; and a central component FCES G80.00+0.50, traced by the distribution of ionised gas within the borders of the photo-dissociation regions and with a power law spectrum of index 2.19 ± 0.03 -0.01 +0.00 that is significantly different from the spectrum of FCES G78.74+1.56. An additional extended emission component FCES G78.83+3.57, located on the edge of the central cavities in Cygnus X and with a spectrum compatible with that of FCES G80.00+0.50, is likely related to the cocoon. For the two brightest components FCES G80.00+0.50 and FCES G78.74+1.56, spectra and radial-azimuthal profiles of the emission can be accounted for in a diffusion-loss framework involving one single population of non-thermal particles with a flat injection spectrum. Particles span the full extent of FCES G78.74+1.56 as a result of diffusion from a central source, and give rise to source FCES G80.00+0.50 by interacting with ionised gas in the innermost region. For this simple diffusion-loss model, viable setups can be very different in terms of energetics, transport conditions, and timescales involved, and both hadronic and leptonic scenarios are possible. The solutions range from long-lasting particle acceleration, possibly in prominent star clusters such as Cyg OB2 and NGC 6910, to a more recent and short-lived release of particles within the last 10–100 kyr, likely from a supernova remnant. The observables extracted from our analysis can be used to perform detailed comparisons with advanced models of particle acceleration and transport in star-forming regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Testing the Presence of Multiple Photometric Components in Nearby Early-type Galaxies Using SDSS

We investigate two-dimensional image decomposition of nearby, morphologically selected early-type galaxies (ETGs). We are motivated by recent observational evidence of significant size growth of quiescent galaxies and theoretical development advocating a two-phase formation scenario for ETGs. We find that a significant fraction of nearby ETGs show changes in isophotal shape that require multi-component models. The characteristic sizes of the inner and outer component are ∼3 and ∼15 kpc. The inner component lies on the mass–size relation of ETGs at z ∼ 0.25–0.75, while the outer component tends to be more elliptical and hints at a stochastic buildup process. We find real physical differences between single- and double-component ETGs, with double-component galaxies being younger and more metal-rich. The fraction of double-component ETGs increases with increasing σ and decreases in denser environments. We hypothesize that double-component systems were able to accrete gas and small galaxies until later times, boosting their central densities, building up their outer parts, and lowering their typical central ages. In contrast, the oldest galaxies, perhaps due to residing in richer environments, have no remaining hints of their last accretion episode.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple nitrogen components in lunar soil sample 12023

Nitrogen is one of the enigmatic elements in lunar soils and breccias. The large range in (delta)N-15 values found within lunar soils was initially attributed to a secular increase in the N-15/N-14 ratio of 50 percent within the solar corona, and hence in the implanted nitrogen within the lunar regolith. However, more recent explanations have proposed a two (or many) component mixing model of solar wind nitrogen with some hypothetical non-solar components. Such components could include indigenous lunar nitrogen, nitrogen contained in interstellar grains in primitive meteorites, and magnetospheric nitrogen from the terrestrial atmosphere. To understand the makeup of multi-component mixtures it is advantageous to have carbon and noble gas data measured simultaneously, particularly in the case of lunar soils, where the solar wind is a likely fundamental contributor of nitrogen. To this end, a new nitrogen instrument was adapted to give some of the desired data in parallel. Conjoint measurements of N abundance and (delta)N-15 together with N/Ar-36 and Ar-36/Ar-38 ratios obtained during a stepped combustion of lunar soil 12023. The results are preliminary to a much more comprehensive investigation of well characterized fractions of the sample which we still have available from a previous study. Stepped combustion of a sample of 12023,7 yielded 94 ppm nitrogen with a (delta)N-15 = +22.2 percent, as well as the characteristic heavy-light-heavy pattern observed for lunar samples. The low temperature maximum was +75.1 percent at 550 C, the minimum at 800 C with (delta)N-15 = -16.7 percent and the high temperature (delta)N-15 peak is +90.6 percent at 1250 C. The major releases of nitrogen occurred between 650 C - 800 C in the form of a double peak; a third, substantial release occurred at 1150 C yielding 14.2 ppm of nitrogen coinciding with a small but recognizable drop in (delta)N-15 against a regularly increasing trend.

Brilliant, D. R.↗

Multiple Spectral Components in Nearby Radio Galaxies

The purpose of this work was to study the complicated structures appearing in ROSAT PSPC observations of nearby radio galaxies through detailed spectroscopy using ASCA, and through combining spectroscopic and structural analyses. The galaxy studied in this work was NGC 6251, believed to have a composite structure based on our ROSAT PSPC analysis, with a strong, point-like, nonthermal core embedded in a weaker, group-scale, thermal halo. However, this simplest interpretation of the PSPC data (Birkinshaw & Worrall 1993; ApJ 412 568) is not unique. Other possibilities included strong thermal emission from the core, with an implied cooling flow. ASCA's spectroscopic capabilities were expected to resolve the ambiguity. When the ASCA data for NGC 6251 were received, we found (after resolving considerable difficulties with the calibration) that they are entirely consistent with a simple power-law interpretation, but that a strong intrinsic X-ray absorbing column is required in NGC 6251. This absorbing column can be identified with the neutral hydrogen found with the VLA (Birkinshaw & Worrall, 1994; BAAS, 25, 1432), and confirmed in a later, higher-resolution, VLA study.

Birkinshaw, M.↗

Multiple Velocity Components in the C IV Absorption Line of NGC 5548

We have observed the much-studied Seyfert 1 galaxy NGC 5548 with the Goddard High-Resolution Spectrograph (GHRS) on the Hubble Space Telescope (HST). Our 14 ks observation covers the C IV emission line at a resolution of greater than 20,000. Our purpose was to study the absorption line found at lower resolution by IUE and the HST Faint Object Spectrograph. We found that the C IV absorption line resolves into six separate doublets with equivalent widths of 0.07-0.38 Angstrom. The absorption lines have blueshifts relative to the systemic velocity of the galaxy of 380-1250 km s(exp -1), except for one, which has a redshift of 250 km s(exp -1), suggesting both inflow and outflow. The inflowing component may be related to the accretion flow into the nuclear black hole. All the doublet lines are resolved by the GHRS. Three doublets are narrow, with FWHM greater than or approximately 100 km s(exp -1), and three are broad, FWHM approximately 160-290 km s(exp -1). We find evidence of partial covering by the narrow absorption lines. Either (but not both) of the two strongest broad doublets could be from the same material that produces the X-ray ionized absorber seen in soft X-rays. The remaining five systems must be at least 10 times less ionized (and so of lower total column density) to remain consistent with the X-ray spectra.

Mathur, Smita↗

Experimental Design for Hanford Low-Activity Waste Glasses with High Waste Loading

This report discusses the development of an experimental design for the initial phase of the Hanford low-activity waste (LAW) enhanced glass study. This report is based on a manuscript written for an applied statistics journal. Appendices A, B, and E include additional information relevant to the LAW enhanced glass experimental design that is not included in the journal manuscript. The glass composition experimental region is defined by single-component constraints (SCCs), linear multiple-component constraints (MCCs), and a nonlinear MCC involving 15 LAW glass components. Traditional methods and software for designing constrained mixture experiments with SCCs and linear MCCs are not directly applicable because of the nonlinear MCC. A modification of existing methodology to account for the nonlinear MCC was developed and is described in this report. One of the glass components, SO 3 , has a solubility limit in glass that depends on the composition of the balance of the glass. A goal was to design the experiment so that SO 3 would not exceed its predicted solubility limit for any of the experimental glasses. The SO 3 solubility limit had previously been modeled by a partial quadratic mixture model expressed in the relative proportions of the 14 other components. The partial quadratic mixture model was used to construct a nonlinear MCC in terms of all 15 components. In addition, there were SCCs and linear MCCs. This report describes how a layered design was generated to (i) account for the SCCs, linear MCCs, and nonlinear MCC and (ii) meet the goals of the study. A layered design consists of points on an outer layer, and inner layer, and a center point. There were 18 outer-layer glasses chosen using optimal experimental design software to augment 147 existing glass compositions that were within the LAW glass composition experimental region. Then 13 inner-layer glasses were chosen with the software to augment the existing and outer-layer glasses. The experimental design was completed by a center-point glass, a Vitreous State Laboratory glass, and replicates of the center point and Vitreous State Laboratory glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗