Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moderator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗
DOE OSTI2021

Air oxidation of yttrium hydride as a high temperature moderator for thermal neutron spectrum fission reactors

Yttrium hydride (YH x ) is an attractive moderator material for thermal neutron spectrum fission reactors requiring a small reactor core volume and has been selected as the neutron moderator for the Transformational Challenge Reactor (TCR), an advanced gas-cooled microreactor. Before YH x can be used in this application, it is important to understand the material response to off-normal conditions. In the present study, 550–650 °C isothermal dry air oxidation was performed to simulate a depressurized loss of force circulation (DLOFC) event. The oxidation was performed using thermogravimetric analysis (TGA) on bulk crack-free YHx coupons. Oxidation studies were also performed on Y coupons to elucidate the impact of H on oxidation. Both the chemistry and distribution of processing impurities were found to strongly affect oxidization behavior on a batch-to-batch basis. Regardless of batch, YHx oxidized at a significantly lower rate than Y at all temperatures, and the lower rate was directly correlated with increased hydride content. Metallic Y exhibited complex exponential kinetics, whereas YH x also exhibited complex kinetics but gained considerably less mass. According to literature reports on protonic and native-ion conductivities of Y 2 O 3 and mass spectrometry analysis of gaseous reaction products formed during the oxidation of YH x , a mechanism for the reduced oxidation rate of yttrium hydride is suggested.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Lithium–sulfur (Li-S) batteries with high energy density and low cost are promising for next-generation energy storage. However, their cycling stability is plagued by the high solubility of lithium polysulfide (LiPS) intermediates, causing fast capacity decay and severe self-discharge. Exploring electrolytes with low LiPS solubility has shown promising results toward addressing these challenges. However, here, we report that electrolytes with moderate LiPS solubility are more effective for simultaneously limiting the shuttling effect and achieving good Li-S reaction kinetics. We explored a range of solubility from 37 to 1,100 mM (based on S atom, [S]) and found that a moderate solubility from 50 to 200 mM [S] performed the best. Using a series of electrolyte solvents with various degrees of fluorination, we formulated the S ingle- S olvent, S ingle- S alt, S tandard S alt concentration with M oderate L i PSs so l ubility E lectrolytes (termed S 6 MILE ) for Li-S batteries. Among the designed electrolytes, Li-S cells using fluorinated-1,2-diethoxyethane S 6 MILE (F4DEE-S 6 MILE) showed the highest capacity of 1,160 mAh g −1 at 0.05 C at room temperature. At 60 °C, fluorinated-1,4-dimethoxybutane S 6 MILE (F4DMB-S 6 MILE) gave the highest capacity of 1,526 mAh g −1 at 0.05 C and an average CE of 99.89% for 150 cycles at 0.2 C under lean electrolyte conditions. This is a fivefold increase in cycle life compared with other conventional ether-based electrolytes. Moreover, we observed a long calendar aging life, with a capacity increase/recovery of 4.3% after resting for 30 d using F4DMB-S 6 MILE. Furthermore, the correlation between LiPS solubility, degree of fluorination of the electrolyte solvent, and battery performance was systematically investigated.

25 ENERGY STORAGE↗
DOE OSTI2022

Advancements in Yttrium Hydride Moderator Development

As microreactors evolve to become a more affordable and efficient worldwide energy source, the development of moderator material within the system to decrease the required mass of low-enriched uranium fuel is important. The use of low- instead of high-enriched uranium in small nuclear reactors stems from recent national policies associated with nonproliferation. New designs are being developed for a range of applications and nuclear space systems in particular. Using system geometries such as those described in this paper, the next step is to advance the technology readiness level of moderator material such as delta-yttrium hydride (YH x,x = 1.6–2.0 ) so that it can be qualified for use in a microreactor system. Although characterization of unirradiated material has been documented previously, to fully understand the performance of this material, behavior in relevant irradiation environments must occur. This paper describes the fabrication of yttrium hydride samples through innovative techniques and how these samples were tested in two relevant neutron environments. These two experiments include (1) a critical experiment performed at the National Criticality Experiments Research Center (NCERC) to evaluate reactivity changes in a neutron-critical environment and (2) irradiation in the Advanced Test Reactor (ATR) to assess structural integrity/material form, thermophysical data, hydrogen permeability, and other features post irradiation. For this purpose, hundreds of samples were fabricated for the NCERC and ATR experiments and are described within this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Investigation of Ion-Irradiated Beryllium Carbide (Be 2 C) for High-Temperature Nuclear Reactor Moderators

Beryllium carbide (Be 2 C) is an attractive alternative to graphite as a moderator material because of its high melting point, moderating efficiency, and theoretical environmental compatibility in MSRs, FHRs and HTGRs. However, its behavior under neutron irradiation is not yet known. Research on otherwise promising beryllium compounds are restricted because of the toxic nature of the material. For this work, a novel experiment was designed to safely irradiate beryllium-containing samples at The Michigan Ion Beam Laboratory (MIBL). Using this new capability, Be 2 C samples were irradiated with 9 MeV C 3+ ions from 2 dpa to 30 dpa, at temperatures up to 500 °C. Samples were characterized to investigate radiation tolerance. No evidence of phase precipitation, dislocation loops, or amorphization was observed up to 30 dpa, suggesting good radiation tolerance. One sample left in air for ~3 months oxidized slowly and lost structural integrity, while a sample kept in argon did not, suggesting that Be 2 C is not suitable for service in moist environments, but maintains its integrity in dry environments.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Advancing the STS Neutron Moderator Design with an Automated Optimization Workflow and Unstructured Mesh Modeling

With the Second Target Station approaching its final design phase, a detailed neutronics evaluation of its critical components is necessary. Optimizing the dimensions of the two cold-source moderators that are at the heart of this facility presents a multi-objective optimization problem for which an accurate geometric description is crucial. We have applied a fully automated optimization workflow in which a detailed unstructured mesh geometry is automatically generated with Attila4MC, starting from a parametrized CREO geometry followed by preprocessing with SpaceClaim. With this geometry, a MCNP run is performed to calculate the brightness metrics, which are subsequently provided to the optimization algorithm in DAKOTA that provides new parameters and drives the optimization loop until convergence. In this paper, we show the results of the analysis that are used for the final design of the cylindrical and tube moderator. The optimization simulations provide a refinement to and confirmation of the conclusions of the previous design iteration. Additional to the optimization, a sensitivity study is performed to study the effect of minor geometry changes, which is important for the final engineering design. In conclusion, with these studies, we demonstrate that the automated workflow and high-fidelity unstructured mesh modeling are efficient tools for a thorough design evaluation.

DAKOTA↗
DOE OSTI2024

Moderate active Fe 3+ doping enables improved cationic and anionic redox reactions for wide-voltage-range sodium storage

Layered metal oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high theoretical specific capacity and wide Na + diffusion channels. However, the irreversible phase transitions and cationic/anionic redoxes cause fast capacity decay. Herein, P2-type Na 0.67 Mg 0.1 Mn 0.8 Fe 0.1 O 2 (NMMF-1) cathode material with moderate active Fe 3+ doping has been designed for sodium storage. Uneven Mn 3+ /Mn 4+ distribution is observed in NMMF-1 and the introduction of Fe 3+ is beneficial for reducing the Mn 3+ contents both at the surface and in the bulk to alleviate the Jahn–Teller effect. The moderate Fe 3+ /Fe 4+ redox can realize the best tradeoff between capacity and cyclability. Therefore, the NMMF-1 demonstrates a high capacity (174.7 mAh g -1 at 20 mA g -1 ) and improved cyclability (78.5% over 100 cycles) in a wide-voltage range of 1.5–4.5 V (vs. Na + /Na). In-situ X-ray diffraction reveals a complete solid-solution reaction with a small volume change of 1.7% during charge/discharge processes and the charge compensation is disclosed in detail. This study will provide new insights into designing high-capacity and stable layered oxide cathode materials for SIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Fabrication of yttrium hydride for high-temperature moderator application

We report given the superior thermal stability and highly attainable hydrogen density, yttrium hydride is an excellent high-temperature moderator material in advanced thermal neutron spectrum reactors that require small core volumes. Large-scale, crack-free, bulk yttrium hydride is in high demand; however, fabrication of yttrium hydride is challenging and has not been demonstrated for nearly half century. The associated challenges are discussed herein. In response to these challenges, a hydriding system was designed and constructed at Oak Ridge National Laboratory and was used to successfully fabricate crack-free yttrium hydride in complex geometries at large scales. This was accomplished by precisely controlling the hydrogen’s partial pressure and the retort temperature, which was informed by the well-established thermodynamic properties of the binary H–Y system. Hydrogen content in as-fabricated hydride was determined by weight change, an approach which was considered reliable based on the use of ultra–high-purity yttrium, the absence of oxide phases up to levels detectable using x-ray diffraction (XRD), and the significant weight gain. Hydrogen distribution along one yttrium hydride rod was evaluated with XRD analysis on materials extracted from different locations on the rod. The results indicated a relatively homogeneous hydrogen distribution along the hydride rod, with <3% uncertainty in the fraction of the δ-phase hydride. In addition, significant efforts are being dedicated to establish a complete database summarizing the thermomechanical and physical properties of as-fabricated yttrium hydride and the irradiation response to facilitate its deployment as a high-temperature moderator in advanced nuclear reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Experiments of water-moderated plutonium metal arrays: part I — description

In the mid-1970s and early 1980s, almost one hundred critical and approach-to-critical experiments using water-moderated plutonium metal arrays were performed at the Rocky Flats Critical Mass Laboratory. The experiments were performed in two programs: 2x2xN arrays conducted in the 1970s and 3x3x3 arrays conducted in the 1980s. Both sets of experiments used the same double-canned plutonium parts and were water moderated. The major differences between the two programs were the support structure and tank and the administrative limits on criticality. This paper summarizes the critical data and results of both sets of experiments. In conclusion, these experiments are then analyzed in a companion paper.

42 ENGINEERING↗
DOE OSTI2022

Systems-wide analysis revealed shared and unique responses to moderate and acute high temperatures in the green alga Chlamydomonas reinhardtii

Different intensities of high temperatures affect the growth of photosynthetic cells in nature. To elucidate the underlying mechanisms, we cultivated the unicellular green alga Chlamydomonas reinhardtii under highly controlled photobioreactor conditions and revealed systems-wide shared and unique responses to 24-hour moderate (35°C) and acute (40°C) high temperatures and subsequent recovery at 25°C. We identified previously overlooked unique elements in response to moderate high temperature. Heat at 35°C transiently arrested the cell cycle followed by partial synchronization, up-regulated transcripts/proteins involved in gluconeogenesis/glyoxylate-cycle for carbon uptake and promoted growth. But 40°C disrupted cell division and growth. Both high temperatures induced photoprotection, while 40°C distorted thylakoid/pyrenoid ultrastructure, affected the carbon concentrating mechanism, and decreased photosynthetic efficiency. We demonstrated increased transcript/protein correlation during both heat treatments and hypothesize reduced post-transcriptional regulation during heat may help efficiently coordinate thermotolerance mechanisms. During recovery after both heat treatments, especially 40°C, transcripts/proteins related to DNA synthesis increased while those involved in photosynthetic light reactions decreased. We propose down-regulating photosynthetic light reactions during DNA replication benefits cell cycle resumption by reducing ROS production. Our results provide potential targets to increase thermotolerance in algae and crops.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Experimental verification of TNSA protons and deuterons in the multi-picosecond moderate intensity regime

Ion acceleration from high intensity short pulse laser interactions is of great interest due to a number of applications, and there has been significant work carried out with laser energies up to a few 100 J with 10's of femtosecond to 1 ps pulse durations. Here, we report results from an experiment at the OMEGA EP laser, where laser energy and pulse length were varied from 100 to 1250 J and 0.7–30 ps, respectively, in the moderate (2 × 10 17 –2 × 10 18 W/cm 2 ) laser intensity regime. Ions and electrons were simultaneously measured from disk targets made of CH and CD by a Thomson parabola and a magnetic spectrometer, respectively. Measurements showed that the electron temperature, T e (MeV), has a dependence on the laser energy, E L (J), and pulse duration, τ L (ps), and its empirical scaling was found to be 0.015 × E L 0.90 τ L –0.48. The maximum proton and deuteron energies are linearly dependent on the electron temperature, (5.60 ± 0.26) × T e and (3.17 ± 0.18) × T e , respectively. A significant increase in proton numbers with the laser energy was also observed. Furthermore, the increase in the maximum proton energy and proton count with higher energy longer duration pulses presented in this article shows that such laser conditions have a great advantage for applications, such as the proton radiograph, in the moderate laser intensity regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Randomized control trial of moderate dose vitamin D alters microbiota stability and metabolite networks in healthy adults

ABSTRACT Evidence indicates that both vitamin D and the gut microbiome are involved in the process of colon carcinogenesis. However, it is unclear what effects supplemental vitamin D 3 has on the gut microbiome and its metabolites in healthy adults. We conducted a double-blind, randomized, placebo-controlled trial to identify the acute and long-term microbiota structural and metabolite changes that occur in response to a moderate dose (4,000 IU) of vitamin D 3 for 12 weeks in healthy adults. Our results demonstrated a significant increase in serum 25-hydroxy-vitamin D (25(OH)D) in the treatment group compared to placebo ( P < 0.0001). Vitamin D 3 significantly increased compositional similarity ( P < 0.0001) in the treatment group, and enriched members of the Bifidobacteriaceae family. We also identified a significant inverse relationship between the percent change in serum 25(OH)D and microbial stability in the treatment group ( R = −0.52, P < 0.019). Furthermore, vitamin D 3 supplementation resulted in notable metabolic shifts, in addition to resulting in a drastic rewiring of key gut microbial-metabolic associations. In conclusion, we show that a moderate dose of vitamin D 3 among healthy adults has unique acute and persistent effects on the fecal microbiota, and suggest novel mechanisms by which vitamin D may affect the host-microbiota relationship. IMPORTANCE Preventative measures to reduce the rise in early-onset colorectal cancer are of critical need. Both vitamin D, dietary and serum levels, and the gut microbiome are implicated in the etiology of colorectal cancer. By understanding the intimate relationship between vitamin D, the gut microbiome, and its metabolites, we may be able to identify key mechanisms that can be targeted for intervention, including inflammation and metabolic dysfunction. Furthermore, the similarity of vitamin D to cholesterol, which is metabolized by the gut microbiome, gives precedence to its ability to produce metabolites that can be further studied and leveraged for controlling colorectal cancer incidence and mortality.

Wyatt, Madhur↗
DOE OSTI2020

Analytic Insights into the Neutronic Characteristics of Neutron Moderators from MCNP Calculations

In the course of re-processing the ENDF/B VIII.0 thermal scattering law data, formulas and data checking insights were developed from MCNP calculations into the neutronic characteristics of moderators. Infinite medium test calculations were carried out in MCNP as part of the verification effort for the ACE formatted thermal scattering files. Edit results from MCNP were combined with derived results to formulate several equations which give analytic insights into the neutronic behavior of moderators.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

A genetic tradeoff for tolerance to moderate and severe heat stress in US hybrid maize

Global climate change is increasing both average temperatures and the frequencies of extreme high temperatures. Past studies have documented a strong negative effect of exposures to temperatures >30°C on hybrid maize yields. However, these studies could not disentangle genetic adaptation via artificial selection from changes in agronomic practices. Because most of the earliest maize hybrids are no longer available, side-by-side comparisons with modern hybrids under current field conditions are generally impossible. Here, we report on the collection and curation of 81 years of public yield trial records covering 4,730 maize hybrids, which enabled us to model genetic variation for temperature responses among maize hybrids. We show that selection may have indirectly and inconsistently contributed to the genetic adaptation of maize to moderate heat stress over this time period while preserving genetic variance for continued adaptation. However, our results reveal the existence of a genetic tradeoff for tolerance to moderate and severe heat stress, leading to a decrease in tolerance to severe heat stress over the same time period. Both trends are particularly conspicuous since the mid-1970s. Such a tradeoff poses challenges to the continued adaptation of maize to warming climates due to a projected increase in the frequency of extreme heat events. Nevertheless, given recent advances in phenomics, enviromics, and physiological modeling, our results offer a degree of optimism for the capacity of plant breeders to adapt maize to warming climates, assuming appropriate levels of R&D investment.

Kusmec, Aaron (ORCID:000000032295385X)↗
DOE OSTI2021

Handbook on the Material Properties of Yttrium Hydride for High Temperature Moderator Applications

Yttrium hydride is an optimal choice for a high-temperature moderator material in advanced thermal neutron spectrum reactors that require small core volumes. A complete database of the thermomechanical properties of yttrium hydride is not yet available, although it is much needed to understand and predict the moderator performance during service in reactors. This milestone report presents the properties of unirradiated bulk yttrium hydride as a function of hydrogen concentration—including density, crystal structure, specific heat capacity, thermal diffusivity, thermal conductivity, hardness, elastic/shear moduli, Poisson’s ratio, fracture strength, microstructure, and thermal stability. This information provides a baseline measurement for the subsequent neutron irradiation response study of yttrium hydride. The recommended empirical treatment of the data is suggested. In addition, other properties (i.e., hydrogen retention, thermal hydrogen migration, and irradiation response) requiring investigation are discussed. Also included are the Preliminary post-irradiation examination (PIE) data of yttrium hydride irradiated at 600 and 900°C to 0.1 dpa in the High Flux Isotope Reactor (HFIR). The thermophysical properties have insignificant change following this low dpa irradiation for both irradiation temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Advancing Solar Innovation for Low and Moderate-Income Households (Final Technical Report)

The overarching goal of this project was to deepen the understanding of the social and economic aspects of solar adoption, with a specific eye towards any pathways or barriers that could be identified that directly impact low and moderate-income households. Specific objectives included (1) identifying and assessing significant non-economic barriers that complicate the ability of LMI households to adopt and benefit from solar, even under scenarios with low economic barriers; (2) assessing the differential ability of groups to benefit from solar adoption based on their ability to invest in different solar innovations; (3) explaining why some LMI communities nonetheless experience significantly higher rates of solar adoption and benefit than others; (4) developing a methodological model for generating data addressing key issues to the project; and (5) designing and developing an interactive web portal that aggregates existing datasets, provides researchers trend analysis capabilities, standardizes project protocols for other states and communities; provides the opportunities for researchers using the same protocol in other communities to upload their results; and engages with the general public by providing them the ability to upload their own perspectives and stories of solar technology adoption. Through a common framework for conducting semi-structured field interviews. In partnership with cooperative extension services, in conjunction with survey research and the aggregation of existing solar adoption datasets, this study has identified that currently ,there is a strong values alignment and knowledge access challenge that continues to affect solar adoption. Participants in this study – many of whom are either low or moderate-income and/or live in underserved rural communities do not believe solar is an option where they live or believe solar is appropriate for their lifestyle. This perception challenge is further exacerbated by the absolute dearth of adopters in most communities and a total lack of local marketing for solar energy. What marketing that does exist is geared towards audiences other than those in the participant's community, reinforcing a perception that 22% of survey respondents (n = 1,551) have: that solar energy is not meant for them and their community. Overcoming these serious human challenges pertaining to knowledge and marketing are critical to reducing the customer acquisition costs incurred amongst LMI communities and especially those in rural America where the opportunities solar provides to increase local energy resilience, security, all while engaging in personal stewardship of the planet could align with local values. Community-Based Social Marketing, built in partnership with community leaders and geared towards meeting local visions of ideal life, is a near term opportunity to bridge the gap between local priorities and national market and policy imperatives for solar while moving towards the administration's goals for renewable energy as part of a just and equitable decarbonization program. The tools and methods developed for this study can serve as a template for identifying other specific local challenges for solar adoption in other state, and provide the opportunity for a common data framework for understanding system-wide trends and barriers to achieving uptake of residential solar in communities that may, ultimately, benefit the most from the technology.

14 SOLAR ENERGY↗
DOE OSTI2021

Deferred Payment Loans for Energy Efficiency: Case Study of a Low- and Moderate-Income Home Improvement Financing Model and Potential Application to Energy Efficiency Projects

Energy efficiency can provide important benefits for low- and moderate-income households such as lower utility bills and healthier, more comfortable homes, but the upfront costs of efficiency improvements are often a barrier. Extending financing to these households can help overcome this barrier but presents its own challenges, including the financial burden of monthly payments and the risk of incurring the repercussions of nonpayment. The deferred payment loan model can give low- and moderate-income households access to energy efficiency without the financial burden of monthly payments while mitigating the risk of nonpayment. From a program sponsor perspective, when grant funds are limited or unavailable, the model provides certain advantages of both grants and financing. Like a grant, target recipients have minimal risk, but like a loan, funds can serve multiple participants since the funding can be revolved. Organizations in several parts of the country have employed the model to provide safe, healthy homes by paying for home repair and home improvement. This case study provides a detailed overview of the deferred payment loan program for home improvements known as the Home Repair Program run by the Opportunity Council, a Community Action Agency (CAA) serving three counties in Washington State. This case study also considers two other CAA-administered deferred payment loan programs – one in Wisconsin and another in Michigan.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗