Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microwave conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The Effect of Ring Expansion in Thienobenzo[ b ]indacenodithiophene Polymers for Organic Field-Effect Transistors

A fused donor, thienobenzo[b]indacenodithiophene (TBIDT), was designed and synthesized using a novel acid-promoted cascade ring closure strategy, and then copolymerized with a benzothiadiazole (BT) monomer. The backbone of TBIDT is an expansion of the well-known indacenodithiophene (IDT) unit and was expected to enhance the charge carrier mobility by improving backbone planarity and facilitating short contacts between polymer chains. However, the optimized field-effect transistors demonstrated an average saturation hole mobility of 0.9 cm 2 V -1 s -1 , lower than the performance of IDT-BT (~1.5 cm 2 V -1 s -1 ). Mobilities extracted from time-resolved microwave conductivity measurements were consistent with the trend in hole mobilities in organic field-effect transistor devices. Scanning tunneling microscopy measurements and computational modeling illustrated that TBIDT-BT exhibits a less ordered microstructure in comparison to IDT-BT. This reveals that a regular side-chain packing density, independent of conformational isomers, is critical to avoid local free volume due to irregular packing, which can host trapping impurities. DFT calculations indicated that TBIDT-BT, despite containing a larger, planar unit, showed less stabilization of planar backbone geometries in comparison to IDT-BT. This is due to the reduced electrostatic stabilizing interactions between the peripheral thiophene of the fused core and the BT unit, resulting in a reduction of the barrier to rotation around the single bond. Finally, these insights provide a greater understanding of the general structure-property relationships required for semiconducting polymer repeat units to ensure optimal backbone planarization, as illustrated with IDT-type units, guiding the design of novel semiconducting polymers with extended fused backbones for high-performance field-effect transistors.

36 MATERIALS SCIENCE↗

Photoinduced Charge Carrier Generation and Decay in Sequentially Deposited Polymer/Fullerene Layers: Bulk Heterojunction vs. Planar Interface

In this work, we use the time-resolved microwave conductivity (TRMC) technique to study the dynamics of charge carrier generation in sequentially deposited conjugated polymer/fullerene layers. These layers are either fully solution-processed, using orthogonal solvents for the layers of the polymer poly(3-hexylthiophene) (P3HT) and the fullerene phenyl-C{sup 61}-butyric acid methyl ester (PCBM), or prepared by thermally evaporating a C{sup 60} layer onto P3HT films. Our work is motivated by the remarkable efficiency of organic photovoltaic (OPV) devices using a sequentially processed P3HT/PCBM active layer. Here we use an electrodeless photoconductivity probe, so we can photoexcite the sample either through the polymer or the fullerene layer. We use samples with extremely thick P3HT films (2.4 {micro}m) and show that excitation from either side of both as-cast and thermally annealed sample yields virtually identical results, consistent with mixing of the PCBM into the polymer film. We also compare solution-deposited samples to samples made by thermally evaporating C{sup 60} on P3HT, and find that we can distinguish between charge generation in bulk-P3HT and at the polymer/fullerene interface. We show that, despite their morphological differences, the carrier dynamics in the sequentially processed samples resemble those of mixed, bulk heterojunction (BHJ) systems. All of this is consistent with the idea that PCBM readily mixes into the P3HT film in sequentially deposited P3HT/PCBM samples, although the total amount of fullerene mixed into the P3HT appears to be less than that typically used in an optimized BHJ. Finally, we discuss the implications for OPV device architectures prepared by sequential deposition from solution.

14 SOLAR ENERGY↗

Microwave Microscopy and Its Applications

Understanding the nanoscale electrodynamic properties of a material at microwave frequencies is of great interest for materials science, condensed matter physics, device engineering, and biology. With specialized probes, sensitive detection electronics, and improved scanning platforms, microwave microscopy has become an important tool for cutting-edge materials research in the past decade. In this article, we review the basic components and data interpretation of microwave imaging and its broad range of applications. In addition to the general-purpose mapping of permittivity and conductivity, microwave microscopy is now exploited to perform quantitative measurements on semiconductor devices, photosensitive materials, ferroelectric domains and domain walls, and acoustic-wave systems. Implementation of the technique in low-temperature and high-magnetic-field chambers has also led to major discoveries in quantum materials with strong correlation and topological order. We conclude the review with an outlook of the ultimate resolution, operation frequency, and future industrial and academic applications of near-field microwave microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave photoconductance spectrometer and methods of using the same

The present disclosure relates to a steady-state microwave conductivity method that includes modulating a light beam to form an amplitude modulated light having a modulation frequency ω1, producing a microwave waveform, exposing a sample to the amplitude modulated light and a first portion of the microwave waveform to produce an amplitude modulation signal on the first portion of the microwave waveform, and mixing a second portion of the microwave waveform and the amplitude modulation signal to produce a first signal and a second signal.

Larson, Bryon William↗

Microwave photoconductance spectrometer and methods of using the same

A steady-state microwave conductivity method whereby a light beam is modulated to form an amplitude modulated light having a modulation frequency ω1. The method further includes producing a microwave waveform, exposing a sample to the amplitude modulated light and a first portion of the microwave waveform to produce an amplitude modulation signal on the first portion of the microwave waveform, and mixing a second portion of the microwave waveform and the amplitude modulation signal to produce a first signal and a second signal.

Larson, Bryon William↗

Conductivity Tuning via Doping with Electron Donating and Withdrawing Molecules in Perovskite CsPbI 3 Nanocrystal Films

Doping of semiconductors enables fine control over the excess charge carriers, and thus the overall electronic properties, crucial to many technologies. Controlled doping in lead-halide perovskite semiconductors has thus far proven to be difficult. However, lower dimensional perovskites such as nanocrystals, with their high surface-area-to-volume ratio, are particularly well-suited for doping via ground-state molecular charge transfer. Here, the tunability of the electronic properties of perovskite nanocrystal arrays is detailed using physically adsorbed molecular dopants. Incorporation of the dopant molecules into electronically coupled CsPbI 3 nanocrystal arrays is confirmed via infrared and photoelectron spectroscopies. Untreated CsPbI 3 nanocrystal films are found to be slightly p-type with increasing conductivity achieved by incorporating the electron-accepting dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and decreasing conductivity for the electron-donating dopant benzyl viologen. Time-resolved spectroscopic measurements reveal the time scales of Auger-mediated recombination in the presence of excess electrons or holes. Microwave conductance and field-effect transistor measurements demonstrate that both the local and long-range hole mobility are improved by F4TCNQ doping of the nanocrystal arrays. The improved hole mobility in photoexcited p-type arrays leads to a pronounced enhancement in phototransistors.

36 MATERIALS SCIENCE↗

Robust and Highly Conductive Water-Stable Copper Iodide-Based Hybrid Single Crystals

High conductivity, carrier mobility as well as long diffusion length are critical for highly efficient solar cells. Here, we report new types of crystalline inorganic-organic hybrid semiconductors, 2D-Cu 2 I 2 (L) [L = benzo[c][1,2,5]thiadiazole (bs) and benzo[c][1,2,5] selenadiazole (bse)], composed of one-dimensional (1D) copper iodide staircase-like chain and benzodiazole-based ligands. These compounds possess narrow and tunable band gaps and high conductivity. High-quality large single crystals of 2D-Cu 2 I 2 (bse) were grown and used to evaluate the charge transport properties of the material. State-of-the-art time-resolved microwave conductivity (TRMC) techniques were used to investigate the charge carrier dynamics, from which a high conductivity of 2 × 10 -4 S/cm, a carrier mobility of ~1 cm 2 V -1 s -1 , a maximum doping/carrier density of 2 +/- 1 × 10 15 cm -3 , and a diffusion length of ~0.17 um were obtained. We report the excellent water/chemical stability combined with high conductivity makes this I-VII-based hybrid material family promising candidates for potential optoelectronic applications.

36 MATERIALS SCIENCE↗

The electron spin resonance study of heavily nitrogen doped 6H SiC crystals

The magnetic and electronic properties of heavily doped n-type 6H SiC samples with a nitrogen concentration of 10{sup 19} and 4 × 10{sup 19 }cm{sup −3} were studied with electron spin resonance (ESR) at 5–150 K. The observed ESR line with a Dysonian lineshape was attributed to the conduction electrons (CE). The CE ESR (CESR) line was fitted by Lorentzian (insulating phase) (T < 40 K) and by Dysonian lineshape (metallic phase) above 40 K, demonstrating that Mott insulator-metal (IM) transition takes place at ∼40 K, accompanied by significant change in the microwave conductivity. The temperature dependence of CESR linewidth follows the linear Korringa law below 40 K, caused by the coupling of the localized electrons (LE) and CE, and is described by the exponential law above 40 K related to the direct relaxation of the LE magnetic moments via excited levels driven by the exchange interaction of LE with CE. The g-factor of the CESR line (g{sub ‖} = 2.0047(3), g{sub ⊥} = 2.0034(3)) is governed by the coupling of the LE of nitrogen donors at hexagonal and quasi-cubic sites with the CE. The sharp drop in CESR line intensity (25–30 K) was explained by the formation of antiferromagnetic ordering in the spin system close to the IM transition. The second broad ESR line overlapped with CESR signal (5–25 K) was attributed to the exchange line caused by the hopping motion of electrons between occupied and non-occupied positions of the nitrogen donors. Two mechanisms of conduction, hopping and band conduction, were distinguished in the range of T = 10–25 K and T > 50 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shifting Defect Self-Regulation via Disordered Vacancies in Hollow Tin Perovskites

Tin(II)-based hybrid halide perovskites typically suffer from severe self-doping behavior as a result of facile oxidation of Sn(II) to Sn(IV), leading to high carrier densities (holes) and metallic-like conductivities that limit their applications. In this contribution, we describe how substituting the large ethylenediammonium cation for methylammonium in the intentionally defective “hollow” perovskite family, MA 1−x en x Sn 1−0.7x I 3−0.4x (MA = methylammonium, en = ethylenediammonium), where 0 ≤ x ≤ 0.38, effectively minimizes the intrinsic self-doping behavior. The use of a solvent-free, mechanochemical synthesis route further circumvents oxidative side reactions typical in solution processing, enabling more precise control and understanding of both composition and defect chemistry. Dark and time-resolved microwave conductivity measurements of these materials as a function of “x” reveal two regimes of conductivity suppression: at low x incorporation (x ≤ 0.15), the carrier density decreases by an order of magnitude via defect-mediated charge compensation, while higher substitution (0.15 < x ≤ 0.38) greatly reduces the carrier mobility. At these lower substitution levels, the observations suggest that intrinsic equilibrium tin vacancies are compensated instead by ionic defects in lieu of mobile holes. For the higher substitution levels, the less mobile carriers exhibit long recombination lifetimes, consistent with polaron-mediated transport. These findings establish a strategy for relatively low iodine chemical potential synthesis and defect-driven control of the carrier concentration in tin halide perovskites, advancing the rational discovery of dopable hybrid semiconductors.

36 MATERIALS SCIENCE↗

Temperature dependent behavior of localized and delocalized electrons in nitrogen-doped 6H SiC crystals as studied by electron spin resonance

We have studied the temperature behavior of the electron spin resonance (ESR) spectra of nitrogen (N) donors in n-type 6H SiC crystals grown by Lely and sublimation sandwich methods (SSM) with donor concentration of 10{sup 17 }cm{sup −3} at T = 60–150 K. A broad signal in the ESR spectrum was observed at T ≥ 80 K with Lorentzian lineshape and g{sub ||} = 2.0043(3), g{sub ⊥} = 2.0030(3), which was previously assigned in the literature to the N donors in the 1s(E) excited state. Based on the analysis of the ESR lineshape, linewidth and g-tensor we attribute this signal to the conduction electrons (CE). The emergence of the CE ESR signal at T > 80 K was explained by the ionization of electrons from the 1s(A{sub 1}) ground and 1s(E) excited states of N donors to the conduction band while the observed reduction of the hyperfine (hf) splitting for the N{sub k1,k2} donors with the temperature increase is attributed to the motional narrowing effect of the hf splitting. The temperature dependence of CE ESR linewidth is described by an exponential law (Orbach process) with the activation energy corresponding to the energy separation between 1s(A{sub 1}) and 1s(E) energy levels for N residing at quasi-cubic sites (N{sub k1,k2}). The theoretical analysis of the temperature dependence of microwave conductivity measured by the contact-free method shows that due to the different position of the Fermi level in two samples the ionization of free electrons occurs from the energy levels of N{sub k1,k2} donors in Lely grown samples and from the energy level of N{sub h} residing at hexagonal position in 6H SiC grown by SSM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Grain-Size-Limited Mobility in Methylammonium Lead Iodide Perovskite Thin Films

We report a systematic study of the gigahertz-frequency charge carrier mobility found in methylammonium lead iodide perovskite films as a function of average grain size using time-resolved microwave conductivity and a single processing chemistry. Our measurements are in good agreement with the Kubo formula for the AC mobility of charges confined within finite grains, suggesting (1) that the surface grains imaged via scanning electron microscopy are representative of the true electronic domain size and not substantially subdivided by twinning or other defects not visible by microscopy and (2) that the time scale of diffusive transport across grain boundaries is much slower than the period of the microwave field in this measurement (-100 ps). The intrinsic (infinite grain size) minimum mobility extracted form the model is 29 +/- 6 cm2 V-1 s-1 at the probe frequency (8.9 GHz).

36 MATERIALS SCIENCE↗

Energetics and Escape of Interchain-Delocalized Ion Pairs in Nonpolar Media

The electron acceptor F4TCNQ p-dopes aggregates “nanowires” of poly(3-hexylthiophene) in nonpolar solvents but does not dope unaggregated chains. The standard free energy change for the charge transfer to form an ion pair is ΔG° et = -0.21 eV. The dissociation constant to produce free ions in toluene by DC conductivity is K° d = 1 × 10 -8 ± 50% (ΔG° d = 0.48 ± 0.05 eV). This remarkably large K°d, for ions in such a low polarity medium, may reflect interchain delocalization of the hole. The particular characteristics of this material system enables determination of both ΔG° et and ΔG° d , to find the overall free energy change from the two neutral species to completely separated ions in nonpolar media. It is endergonic by +0.27 ± 0.05 eV in contrast to -0.6 eV estimated from reported HOMO LUMO differences, illustrating the challenges that persist in determining such energetics. Steady state microwave conductivity experiments on doped aggregates confirm that holes in the aggregates cannot easily escape their dopant counterion, but at higher dopant concentrations, holes become mobile. These results provide insight into the mechanisms of charge separation involving intermolecularly delocalized charges in nonpolar media, an integral process in organic photovoltaic devices and doped molecular films.

36 MATERIALS SCIENCE↗

Powder preparation and UV absorption properties of selected compositions in the CeO{sub 2}-Y{sub 2}O{sub 3} system

Several approaches have been investigated to prepare fluorite-type compositions within the (1-x) CeO{sub 2}-xYO{sub 1.5} system. The optical properties of the resulting modified-ceria materials have been characterized in order to evaluate their potential abilities as inorganic UV absorbers. Diffuse reflectance analyses reveal a strong optical absorption between 390 and 400 nm for all substituted compositions and the spectral selectivities are estimated suitable for the targeted application. Additionally, time resolved microwave conductivity (TRMC) and phenol photodegradation analyses do not indicate any photocalatytic activity for these compositions. Aqueous colloidal suspensions of the Ce{sub 0.7}Y{sub 0.3}O{sub 1.85} UV absorber have been carried out. - Graphical abstract: Comparison between diffuse reflectance spectra of ceria (x=0) and yttrium modified ceria (x=0.3)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-contact, non-destructive, quantitative probing of interfacial trap sites for charge carrier transport at semiconductor-insulator boundary

The density of traps at semiconductor–insulator interfaces was successfully estimated using microwave dielectric loss spectroscopy with model thin-film organic field-effect transistors. The non-contact, non-destructive analysis technique is referred to as field-induced time-resolved microwave conductivity (FI-TRMC) at interfaces. Kinetic traces of FI-TRMC transients clearly distinguished the mobile charge carriers at the interfaces from the immobile charges trapped at defects, allowing both the mobility of charge carriers and the number density of trap sites to be determined at the semiconductor-insulator interfaces. The number density of defects at the interface between evaporated pentacene on a poly(methylmethacrylate) insulating layer was determined to be 10{sup 12 }cm{sup −2}, and the hole mobility was up to 6.5 cm{sup 2} V{sup −1} s{sup −1} after filling the defects with trapped carriers. The FI-TRMC at interfaces technique has the potential to provide rapid screening for the assessment of interfacial electronic states in a variety of semiconductor devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Locus of Free Charge-Carrier Generation in Solution-Cast Zn1–xMgxO/Poly(3-hexylthiophene) Bilayers for Photovoltaic Applications

The photoconductivity of solution-cast Zn 1–x Mg x O (x=0-0.4) and poly(3-hexylthiophene) (P3HT) thin films, and Zn 1-x Mg x O/P3HT bilayers is investigated using Time-Resolved Microwave Conductivity (TRMC) with the aim of determining the locus of free charge carrier generation in the bilayer system. The photoconductivity of Zn 1-x Mg x O thin films, under illumination with 300 nm laser pulses, is limited by the formation of stable excitons and by scattering of the carriers at grain boundaries. The electron mobility in Zn 1–x Mg x O films decreases exponentially with Mg concentration, up to x=0.4. In agreement with previous work, free carriers are observed in the P3HT film under illumination with 500 nm pulses in the absence of an acceptor. Under illumination with 500 nm pulses, where only the polymer absorbs, the TRMC signal for the Zn 1-x Mg x O/P3HT bilayers for x≥0.2 is the same as that of pure P3HT, indicating that free carrier generation in these bilayers occurs predominately by exciton dissociation in the polymer bulk, and not at the interface between the polymer and the solution-cast oxide. At lower Mg concentrations (x<0.2) the TRMC signal increases with decreasing x following the dependence of the electron mobility in the oxide but its light intensity dependence remains consistent with free carrier generation in the polymer bulk. To explain these results and previously published photovoltaic device data (Adv. Funct. Mater. 2007, 17, 264) we propose that free carrier generation in the bilayers predominantly occurs in the bulk of P3HT, and is followed by electron injection to the oxide to yield photocurrent in photovoltaic cells. The dependence of the TRMC signal of the bilayers on Mg concentration is explained in terms of the yield for free carrier generation in the polymer and the relative contributions of electrons in the oxide and holes in the polymer.

14 SOLAR ENERGY↗

Establishing Self-Dopant Design Principles from Structure–Function Relationships in Self-n-Doped Perylene Diimide Organic Semiconductors

Self-doping is a particular doping method that has been applied to a wide range of organic semiconductors. However, there is a lack of understanding regarding the relationship between dopant structure and function. A structurally diverse series of self-n-doped perylene diimides (PDIs) is investigated to study the impact of steric encumbrance, counterion selection, and dopant/PDI tether distance on functional parameters such as doping, stability, morphology, and charge-carrier mobility. The studies show that self-n-doping is best enabled by the use of sterically encumbered ammoniums with short tethers and Lewis basic counterions. Additionally, water is found to inhibit doping, which concludes that thermal degradation is merely a phenomenological feature of certain dopants, and that residual solvent evaporation is the primary driver of thermally activated doping. In situ grazing-incidence wide-angle X-ray scattering studies show that sample annealing increases the π–π stacking distance and shrinks grain boundaries for improved long-range ordering. These features are then correlated to contactless carrier-mobility measurements with time-resolved microwave conductivity before and after thermal annealing. In conclusion, the collective relationships between structural features and functionality are finally used to establish explicit self-n-dopant design principles for the future design of materials with improved functionality.

36 MATERIALS SCIENCE↗

Revisiting the Role of Entropy for Charge Separation in 1D Pi-Conjugated Semiconductors

Free carrier generation in organic donor/acceptor heterojunctions and redox-doped organic semiconductors is poorly understood, since assumed tight electron-hole binding conflicts with observed high free carrier yields. Cornerstone analyses that have guided the field for over 15 years predict that entropy can stabilize free charges in 2D and 3D pi-conjugated semiconductors but not in 1D systems. Here, the impact of entropy on charge generation in 1D pi-conjugated semiconductors is revisited by exploiting a greatly simplified system where enthalpy considerations alone should not allow for free charge generation. Noncontact solution-phase microwave conductivity is used to investigate the carrier density-dependent conductivity and dielectric constant in isolated chemically doped semiconducting single-walled carbon nanotubes in a low-dielectric solvent. Dopant chemical structure dramatically influences the carrier density-dependent complex conductivity, with bulky dopants facilitating carrier escape even at carrier densities below one carrier per nanotube. Three distinct numerical calculations show that entropic stabilization dramatically lowers the Gibbs energy barrier for free charge generation, explaining the high yield of free carriers, even in 1D. This renewed understanding of entropy's role in carrier generation has important implications for designing organic electronic devices-such as solar cells and thermoelectric energy harvesters-for enhanced carrier yield, conductivity, and performance.

36 MATERIALS SCIENCE↗