Superplasticity and low-temperature ductility in a Cr-30 at. pct Co alloy.
Superplastic effect in cr-30 at. pct Co alloy, noting low temperature bend ductility in quenched metastable single phased and near equilibrium conditions
MECHANICAL PROPERTY↗
SEARCH · Engineering Papers
Results for “metastable phase”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Surface-spike growth on NiBr sub 2 crystals - A VLS mode of crystal growth.
Droplets associated with surface-spike growth of crystals of NiBr 2 by sublimation have been analyzed and found to contain Cu, Co, Mn, and Fe in addition to Ni and Br. These elements exist in the bulk of the original charge material in concentrations that are several orders of magnitude lower than that in the droplets. During crystal growth by sublimation the impurities collect on the surface of growing crystals, until sufficient concentrations are reached to cause the nucleation of a metastable liquid phase droplet. Once the liquid phase droplets have been nucleated, they may then become attached to growth steps and produce accelerated growth from these sites. Such processes occur in NiBr 2 , during growth by sublimation, at approximately 500 °C below the melting point of NiBr 2 .
Edward N Sickafus↗
SPAR and ASTP studies of plane-front solidification and magnetic properties of Bi/MnBi
Eutectic and off-eutectic Bi/MnBi compositions have been directionally solidified parallel, anti-parallel and perpendicular to the gravity vector in a one-g environment and in low-gravity during the ASTP flight. MnBi rod diameter and interparticle spacing distributions are similar for all gravity vector orientations when grown at high solidification rates in one-g. Previously reported ASTP results are explained by the existence of a metastable magnetic phase and off-eutectic solidification models.
Pirich, R. G.↗
Physicochemical investigation of NiAl with small molybdenum additions
Specimens of four cast NiAl alloys, three of them containing 0.5, 1.0 and 1.5 at. % Mo., were homogenized for 10, 10, and 140 hr at 1373, 1523 and 1273 K, respectively, then kept at 1073, 1173 and 1323 K for 60, 120 and 3 hr, respectively, and quenched in icy water. The precipitation of a metastable Ni3Mo phase was observed at temperatures between 1073 and 1523 K. Molybdenum substituted for nickel was found to inhibit the lattice disordering in NiAl at 1073 and 1523 K.
Troshkina, V. A.↗
The evolution and growth of Al2O3 scales on beta-NiAl
The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.
Doychak, J. K.↗
Sampling the oxidative weathering products and the potentially acidic permafrost on Mars
Large areas of Mars' surface are covered by oxidative weathering products containing ferric and sulfate ions having analogies to terrestrial gossans derived from sulfide mineralization associated with iron-rich basalts. Chemical weathering of such massive and disseminated pyrrhotite-pentlandite assemblages and host basaltic rocks in the Martian environment could have produced metastable gossaniferous phases (limonite containing poorly crystalline hydrated ferric sulfates and oxyhydroxides, clay silicates and opal). Underlying groundwater, now permafrost on Mars, may still be acidic due to incomplete buffering reactions by wall-rock alteration of unfractured host rock. Such acidic solutions stabilize temperature-sensitive complex ions and sols which flocculate to colloidal precipitates at elevated temperatures. Sampling procedures of Martian regolith will need to be designed bearing in mind that the frozen permafrost may be corrosive and be stabilizing unique complex ions and sols of Fe, Al, Mg, Ni and other minor elements.
Burns, Roger G.↗
Containerless science for materials processing
Containerless materials processing in space to restrict specimen deformation from hydrostatic pressure of contact with the container is discussed. Several containerless science studies are reviewed, including the study of drop dynamics, nucleation studies, metastable solid phases experiments, glass research, biological materials research, and protein crystal growth. The development of technologies for materials research in space are examined, including acoustic containerless systems, and electrostatic and electromagnetic containerless processing.
Wang, T. G.↗
Transient oxidation of single-crystal beta-NiAl
The transient oxidation of beta-NiAl in air at 800 C and 1100 C has been studied using electron microscopy. The oxide scale consists predominantly of metastable Al2O3 phases. Theta-Al2O3 is the major oxide phase within 10.0 hr of oxidation at 800 C and 0.1 hr at 1100 C. The scales form epitaxially on (001) sub beta and (012) sub beta specimens throughout the transient stage, whereas the degree of preferred oxide orientation decreases with oxidation time on (011) sub beta and (111) sub beta specimens. The orientation relationships reflect the small mismatch between parallel close-packed directions in the metal and in the cation sublattice of the oxides. The correlation of distinctive oxide surface morphologies with internal structural defects indicates the strong tendency of the Al2O3 scale to grow via short-circuit diffusion paths.
Doychak, J.↗
Ordering in the Fe-Ni system under electron irradiation
The disorder-order transformation was generated in a range of Fe-Ni alloys using 1 MeV electrons in a high voltage electron microscope. The experimental factors that influence the occurrence of the transformation were determined, and the critical disordering temperature, Tc, was determined as a function of composition. It was demonstrated that the irradiation enhanced the ordering reaction kinetics. A metastable, ordered phase transformation was not induced. From the results, it is possible to deduce new information about the Fe-Ni phase diagram below 350 C.
Reuter, K. B.↗
Surfactant-based critical phenomena in microgravity
The objective of this research project is to characterize by experiment and theoretically both the kinetics of phase separation and the metastable structures produced during phase separation in a microgravity environment. The particular systems we are currently studying are mixtures of water, nonionic surfactants, and compressible supercritical fluids at temperatures and pressures where the coexisting liquid phases have equal densities (isopycnic phases). In this report, we describe experiments to locate equilibrium isopycnic phases and to determine the 'local' phase behavior and critical phenomena at nearby conditions of temperature, pressure, and composition. In addition, we report the results of preliminary small angle neutron scattering (SANS) experiments to characterize microstructures that exist in these mixtures at different fluid densities.
Kaler, Eric W.↗
Containerless Measurement of Thermophysical Properties of Ti-Zr-Ni Alloys
The surface tension, viscosity, density, and thermal expansion of Ti-Zr-Ni alloys were measured for a number of compositions by electrostatic levitation methods. Containerless methods greatly reduce heterogeneous nucleation, increasing access to the undercooled liquid regime at finite cooling rates. The density and thermal expansion are measured optically, while the surface tension and viscosity are measured by the oscillating drop method. The measured alloys include compositions which form a metastable quasicrystal phase from the undercooled liquid, and alloys close to the composition of several multi-component bulk metallic glass-forming alloys. Measurements of surface tension show behavior typical of transition metals at high temperature, but a sudden decrease in the deeply undercooled liquid for alloys near the quasicrystal-forming composition range, but not for compositions which form the solid-solution phase first.
Hyers, Robert↗
Thermophysical Properties Measurements of Zr62Cu20Al10Ni8
Thermophysical property studies performed at high temperature can prove challenging because of reactivity problems brought on by the elevated temperatures. Contaminants from measuring devices and container walls can cause changes in properties. To prevent this, containerless processing techniques can be employed to isolate a sample during study. A common method used for this is levitation. Typical levitation methods used for containerless processing are, aerodynamically, electromagnetically and electrostatically based. All levitation methods reduce heterogeneous nucleation sites, 'which in turn provide access to metastable undercooled phases. In particular, electrostatic levitation is appealing because sample motion and stirring are minimized; and by combining it with optically based non-contact measuring techniques, many thermophysical properties can be measured. Applying some of these techniques, surface tension, viscosity and density have been measured for the glass forming alloy Zr62Cu20Al10Ni8 and will be presented with a brief overview of the non-contact measuring method used.
Bradshaw, Richard C.↗
Containerless Processing Studies in the MSFC Electrostatic Levitator
Levitation or containerless processing represents an important tool in materials research. Levitated specimens are free from contact with a container, which permits studies of deeply undercooled melts, and high-temperature, highly reactive materials. Containerless processing provides data for studies of thermophysical properties, phase equilibria, metastable state formation, microstructure formation, undercooling, and nucleation. Levitation techniques include: acoustic, aero-acoustic, electromagnetic, and electrostatic. In microgravity, levitation can be achieved with greatly reduced positioning forces. Microgravity also reduces the effects of buoyancy and sedimentation in melts. The European Space Agency (ESA) and the German Aerospace Center (DLR) jointly developed an electromagnetic levitator facility (MSL-EML) for containerless materials processing in space. The MSL-EML will be accommodated in the European Columbus Facility on the International Space Station (ISS). The electrostatic levitator (ESL) facility at the Marshall Space Flight Center provides support for the development of containerless processing studies for the ISS. The capabilities of the facility and recent results will be discussed.
Rogers, J. R.↗
Liquid-Liquid Phase Separation in Supersaturated Lysozyme Solutions and Associated Precipitate Formation/Crystallization
Using cloud point determinations, the phase boundaries (binodals) for metastable liquid-liquid (L-L) separation in supersaturated hen egg white lysozyme solutions with 3%, 5%, and 7% (wlv) NaCl at pH= 4.5 and protein concentrations c between 40 and 400 mg/ml were determined. The critical temperature for the binodal increased approximately linearly with salt concentration. The coexisting liquid phases both remained supersaturated but differed widely in protein concentration. No salt repartitioning was observed between the initial and the two separated liquid phases. After the L-L separation, due to the presence of the high protein concentration phase, crystallization occurred much more rapidly than in the initial solution. At high initial protein concentrations, a metastable gel phase formed at temperatures above the liquid binodal. Both crystal nucleation and gel formation were accelerated in samples that had been cycled through the binodal. Solutions in the gel and L-L regions yielded various types of precipitates. Based on theoretical considerations, previous observations with other proteins, and our experimental results with lysozyme, a generic phase diagram for globular proteins is put forth. A limited region in the (T,c) plane favorable for the growth of protein single crystals is delineated.
Muschol, Martin↗
Indigenous Organic Matter Associated with Unusual Low Temperature Aqueous Secondary Phases in the Mars Meteorite Nakhla
In freshly fractured chips of the Mars meteorite Nakhla, we found carbonaceous phases intimately associated with secondary aqueous alteration phases, both mineral and amorphous, interpreted to have formed through the low-temperature, mineral-water dissolution of the host Martian basalt.We have characterized the nature of carbonaceous matter and spatially associated secondary phases within Nakhla using a multidisciplinary suite of optical and electron beam instrumentation(Thomas-Keprta et al., 2022). Secondary Phases: The preserved secondary mineral phases are best described as ‘juvenile’ hydrated amorphous silica formed when water interacts with mafic rocks. Although amorphous silica on Earth rarely persists through geologic time due to alteration into other phases, e.g.,microcrystalline opal-CT and eventually quartz, the lack of maturation of primarily amorphous silica with embedded nano phase ferrihydrite in Nakhla infers these phases formed in a limited water environment by low temperature, circumneutral pH fluids stabilized by the presence of coexisting amorphous silica.Additionally, we report the presence of the ferrous hydroxycarbonate mineral chukanovite (Fe2(OH)2CO3)within some of the secondary mineral aggregates studied. Organic Matter:Indigenous Nakhla carbonaceous matter is present both in condensed phases and in a dispersed state spatially associated with secondary alteration phases. In the former, discrete refractory micron to submicron assemblages were identified that appear macromolecular in nature and, in several cases, associated with F and, in one case, significant N. While organically bound Fhas yet to be detected remotely on Mars, the identification of organic N within one of the carbonaceous phases is considered a prerequisite for Martian astrobiological potential. Summary: Neither the intimate association of carbonaceous matter with secondary phases nor the identification of chukanovite have been previously reported in any of the Martian meteorites.A variety of habitability-related metastable solid-phase, oxidation-reduction, and organic-molecular sample attributes in Nakhla formed hundreds of millions of years ago near Mars’ surface; these alteration products persisted on Mars until very recentlyand resemble the amorphous materials observed at Gale crater by Mars Science Laboratory CuriosityRover (Rampe et al., 2020).Similar phases may be expected to occur elsewhere on Mars (e.g., Jezerocrater). References: Rampe E. B. et al.(2020) Mineralogy and geochemistry of sedimentary rocks and eolian sediments in Gale crater, Mars: A review after six Earth years of exploration with Curiosity.Geochemistry80, 125605; Thomas-Keprta K.L. et al. (2022) Indigenous carbon-rich matter associated with unusual aqueous alteration features in Nakhla: Complex formation and preservation history. Geochim. et Cosmochim. Acta320, 41-78 (online).
Mars meteorite↗
Science Using an Electrostatic Levitation Furnace in the MUCAT Sector at the APS
The original motivation for the construction of the BESL prototype was to obtain the first proof of a 50-year-old hypothesis regarding the solidification of liquid metals. Since the 1950s it has been known that under proper conditions liquid metals can be cooled below their melting temperature (undercooled) without crystallizing to the stable solid phase. In 1952 Frank proposed that this was because the atoms in the metallic liquid were arranged with the symmetry of an icosahedron, a Platonic solid consisting of 20 tetrahedra (4-sided pyramid-shaped polyhedra) arranged around a common center. Since this local atomic order is incompatible with the long-range translational periodicity of crystal phases, a barrier is formed to the formation of small regions of the crystal phase, the nucleation barrier. A proof of Frank's hypothesis required a direct correlation between measured icosahedral order in the undercooled liquid and the nucleation barrier. The tendency of sample containers to catalyze nucleation obscured this relation, requiring containerless techniques. Combining containerless processing techniques for electrostatically levitated droplets (ESL) with x-ray synchrotron methods, a team from Washington University, St. Louis, MO, NASA Marshall Space Flight Center, and MUCAT at the APS demonstrated an increasing icosahedral order in TiZrNi liquids with decreasing temperature below the melting temperature. The increased icosahedral order caused the transformation of the liquid to a metastable icosahedral quasicrystal phase, instead of the stable tetrahedrally-coordinated crystal intermetallic, giving the first clear demonstration of the connection between the nucleation barrier and the local structure of the liquid, verifying Frank's hypothesis for this alloy.
Goldman, A.↗
Heterogeneous nucleation of gamma prime in Al-Ag and Al-Ag /Cd or Cu/ alloys.
Results of transmission electron microscopy studies of heterogeneous nucleation of the metastable gamma prime phase were made in binary and ternary alloys of Al-5 at. % Ag, Al-4.8 at. % Ag-0.15 at. % Cd, and Al-4.8 at. % Ag-0.2 at. % Cu. Heterogeneous nucleation of gamma prime was found to be associated with four types of dislocations, regardless of the quenching treatment or alloy additions which were used. Nucleation was found to occur on: (a) jogged dislocations; (b) helical dislocations; (c) dislocation loops; (d) heterogeneous climb sources. Only one nucleation mechanism was found to be unique to the ternary alloys: that of nucleation on heterogeneous climb sources.
Passoja, D. E.↗
Containerless undercooling and solidification of bulk metastable Nb3Ge alloys
Experiments using containerless undercooling and low-gravity solidification of Nb(1-x)Ge(x) alloys for x=0.13-0.27 have been carried out in a 32-m drop-tube apparatus to study the feasibility of forming metastable Nb3Ge in bulk form. It is found that bulk samples (2-3 mm diam) of Nb-Ge alloys with 18-22% Ge can be undercooled by large amounts (300-500 K) and solidified in a containerless environment. Subsequent quenching of the solidified samples in oil helps preserve the metastable A-15 phase by removing the latent heat of fusion and quickly cooling the samples to a stable temperature below 1000 C. Even at an undercooling of less than 100 K, the superconducting transition temperature of the material is enhanced over the cast material by about 1 K.
Lacy, L. L.↗