Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “matrix formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Efficient Algorithms for Computing Trim and Small-Disturbance Equations of Motion of Aircraft Coordinated and Uncoordinated, Steady, Steep Turns

The development of computational algorithms that permit efficient calculation of aircraft trim states and of the associated small disturbance equations of motion for a systematic investigation of the statics and dynamics of aircraft in coordinated and uncoordinated, steady, steep turning flight is reported. The efficiency in the trim computation is realized by decoupling the governing equations. The small disturbance equations of motion, which are given in a general body axis system, include aerodynamic acceleration derivatives; they are cast in a familiar first order, vector matrix format of modern system theory. These algorithms were applied to a variety of rotorcraft simulation models. Results pertaining to a simulated hingeless rotor helicopter are also presented

Chen, Robert T. N.↗

Modeling material failure with a vectorized routine

The computational aspects of modelling material failure in structural wood members are presented with particular reference to vector processing aspects. Wood members are considered to be highly orthotropic, inhomogeneous, and discontinuous due to the complex microstructure of wood material and the presence of natural growth characteristics such as knots, cracks and cross grain in wood members. The simulation of strength behavior of wood members is accomplished through the use of a special purpose finite element/fracture mechanics routine, program STARW (Strength Analysis Routine for Wood). Program STARW employs quadratic finite elements combined with singular crack tip elements in a finite element mesh. Vector processing techniques are employed in mesh generation, stiffness matrix formation, simultaneous equation solution, and material failure calculations. The paper addresses these techniques along with the time and effort requirements needed to convert existing finite element code to a vectorized version. Comparisons in execution time between vectorized and nonvectorized routines are provided.

Cramer, S. M.↗

Some chemical and isotopic observations in chondrules

Chemical, nitrogen and noble gas isotopic observations in individual chondrules of the Bjurbole (L4) and Dhajala (H3,4) chondrites are reported. The delta N-15 is +9.4 for the Bjurbole 'matrix,' ranges from +6.4 to -20.0 in chondrules, and appears to be related to the chemical composition. Nitrogen isotope systematics seem to require the presence of more than one component of distinct signatures. Although we cannot rule out complex processes of chondrule and matrix formation involving element and isotope fractionations, the oxygen isotope systematics also seem to require distinct reservoirs. The results in terms of the lack of equilibrations among chondrule minerals are discussed, as well as with the host meteorite matter, and also the paradox of the constant Fe/Mg ratio of olivines in Bjurbole and of the majority of ordinary chondrites.

Fredriksson, K.↗

A knowledge-based tool for multilevel decomposition of a complex design problem

Although much work has been done in applying artificial intelligence (AI) tools and techniques to problems in different engineering disciplines, only recently has the application of these tools begun to spread to the decomposition of complex design problems. A new tool based on AI techniques has been developed to implement a decomposition scheme suitable for multilevel optimization and display of data in an N x N matrix format.

Rogers, James L.↗

Stress Stiffening Of STARDYNE Plate Elements

Stress-stiffening program, written in FORTRAN language, calculates geometric stiffness matrix, resulting from stressed condition. Creates file appended to STARDYNE bulk data deck containing entries added to STARDYNE stiffness matrix. Format of this file compatible with STARDYNE.

Philpot, Dennis C.↗

Program Helps Decompose Complicated Design Problems

Time saved by intelligent decomposition into smaller, interrelated problems. DeMAID is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Displays modules in N x N matrix format. Requires investment of time to generate and refine list of modules for input, it saves considerable amount of money and time in total design process, particularly new design problems in which ordering of modules has not been defined. Program also implemented to examine assembly-line process or ordering of tasks and milestones.

Rogers, James L., Jr.↗

Software For Calibration Of Polarimetric SAR Data

POLCAL (Polarimetric Radar Calibration) software tool intended to assist in calibration of synthetic-aperture radar (SAR) systems. In particular, calibrates Stokes-matrix-format data produced as standard product by NASA/Jet Propulsion Laboratory (JPL) airborne imaging synthetic aperture radar (AIRSAR). Version 4.0 of POLCAL is upgrade of version 2.0. New options include automatic absolute calibration of 89/90 data, distributed-target analysis, calibration of nearby scenes with corner reflectors, altitude or roll-angle corrections, and calibration of errors introduced by known topography. Reduces crosstalk and corrects phase calibration without use of ground calibration equipment. Written in FORTRAN 77.

Van Zyl, Jakob↗

Investigating and implementing enhancements to the simulation of short-term collision hazards

A software tool, the Relative Collision Matrix (RCM), has been developed to provide a quick-look representation of the shortterm collision hazard to space systems from a fragmentation event in Earth orbit. The software performs multiple fragmentation simulations of space objects to quantify the probability of collision for a satellite or a constellation of satellites nearby. Previously, the results were displayed in a color matrix format which showed the relative hazard of each constellation. The RCM can be used for scientific research and operational assessments even though it was designed for test and evaluation applications. Because of its successful use as an analytical tool, the capabilities of RCM are being extended by enhancing the orbital hazard analysis routines, developing ballistic trajectory hazard analysis routines, and expanding the breakup modeling. Improvements are also being made to the RCM's usability and presentation quality by developing a graphical user interface and by providing graphical animated and nonanimated output.

Huth, Jeffrey S.↗

Program For Analyzing Failures In A Complex System

Configurable Real-Time Analysis System (CRANS) computer program provides means for representing logically interconnected items (e.g., modules of equipment in complicated system) in matrix format. Capabilities provided helpful in real-time environment (e.g., operational environment of such system), in which need for quick evaluation of results of changes or failures. Program facilitates rapid logic-tree analysis. Written in C language.

Mccluney, R. Kevin↗

Comparing Alternatives For Replacing Harmful Chemicals

Methodology developed to provide guidance for replacement of industrial chemicals that must be phased out by law because they are toxic and/or affect environment adversely. Chemicals and processes ranked numerically. Applies mostly to chemicals contributing to depletion of ozone in upper atmosphere; some other harmful chemicals included. Quality function deployment matrix format provides convenient way to compare alternative processes and chemicals. Overall rating at bottom of each process-and-chemical column indicates relative advantage.

Cruit, W.↗

Three Dimensional Optic Tissue Culture and Process

A process for artificially producing three-dimensional optic tissue has been developed. The optic cells are cultured in a bioireactor at low shear conditions. The tissue forms as normal, functional tissue grows with tissue organization and extracellular matrix formation.

OConnor, Kim C.↗

BOREAS RSS-16 AIRSAR CM Images: Integrated Processor Version 6.1 Level-3b

The BOREAS RSS-16 team used satellite and aircraft SAR data in conjunction with various ground measurements to determine the moisture regime of the boreal forest. RSS-16 assisted with the acquisition and ordering of NASA JPL AIRSAR data collected from the NASA DC-8 aircraft. The NASA JPL AIRSAR is a side-looking imaging radar system that utilizes the SAR principle to obtain high resolution images that represent the radar backscatter of the imaged surface at different frequencies and polarizations. The information contained in each pixel of the AIRSAR data represents the radar backscatter for all possible combinations of horizontal and vertical transmit and receive polarizations (i.e., HH, HV, VH, and VV). Geographically, the data cover portions of the BOREAS SSA and NSA. Temporally, the data were acquired from 12-Aug-1993 to 31-Jul-1995. The level-3b AIRSAR CM data are in compressed Stokes matrix format, which has 10 bytes per pixel. From this data format, it is possible to synthesize a number of different radar backscatter measurements. The data are stored in binary image-format files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗

Osteoblast fibronectin mRNA, protein synthesis, and matrix are unchanged after exposure to microgravity

The well-defined osteoblast line, MC3T3-E1 was used to examine fibronectin (FN) mRNA levels, protein synthesis, and extracellular FN matrix accumulation after growth activation in spaceflight. These osteoblasts produce FN extracellular matrix (ECM) known to regulate adhesion, differentiation, and function in adherent cells. Changes in bone ECM and osteoblast cell shape occur in spaceflight. To determine whether altered FN matrix is a factor in causing these changes in spaceflight, quiescent osteoblasts were launched into microgravity and were then sera activated with and without a 1-gravity field. Synthesis of FN mRNA, protein, and matrix were measured after activation in microgravity. FN mRNA synthesis is significantly reduced in microgravity (0-G) when compared to ground (GR) osteoblasts flown in a centrifuge simulating earth's gravity (1-G) field 2.5 h after activation. However, 27.5 h after activation there were no significant differences in mRNA synthesis. A small but significant reduction of FN protein was found in the 0-G samples 2.5 h after activation. Total FN protein 27.5 h after activation showed no significant difference between any of the gravity conditions, however, there was a fourfold increase in absolute amount of protein synthesized during the incubation. Using immunofluorescence, we found no significant differences in the amount or in the orientation of the FN matrix after 27.5 h in microgravity. These results demonstrate that FN is made by sera-activated osteoblasts even during exposure to microgravity. These data also suggest that after a total period of 43 h of spaceflight FN transcription, translation, or altered matrix assembly is not responsible for the altered cell shape or altered matrix formation of osteoblasts.

Flight Experiment↗

Processing and Structural Advantages of the Sylramic-iBN SiC Fiber for SiC/SiC Components

The successful high-temperature application of complex-shaped SiC/SiC components will depend on achieving as high a fraction of the as-produced fiber strength as possible during component fabrication and service. Key issues center on a variety of component architecture, processing, and service-related factors that can reduce fiber strength, such as fiber-fiber abrasion during architecture shaping, surface chemical attack during interphase deposition and service, and intrinsic flaw growth during high-temperature matrix formation and composite creep. The objective of this paper is to show that the NASA-developed Sylramic-iBN SiC fiber minimizes many of these issues for state-of-the-art melt-infiltrated (MI) SiC/BN/SiC composites. To accomplish this, data from various mechanical tests are presented that compare how different high performance SiC fiber types retain strength during formation of complex architectures, during processing of BN interphases and MI matrices, and during simulated composite service at high temperatures.

Yun, H. M.↗

Retention of Cr in Meta-kaolin-based geo-polymeric Materials under Oxidation and Carbonation - 17453

Alkali activated alumino-silicates, often referred to as geo-polymers, are considered promising immobilization matrices for contaminants due to their high sorption capacity, durability and low leachability. For some contaminants they may prove superior to cement pastes that are conventional immobilization materials in waste management applications. However, estimating the retention capacity of some contaminants under environmental conditions that include oxidation and carbonation and may induce a valance change, is complicated. These contaminants tend to be soluble under oxidizing condition and form precipitates under reducing conditions. Thus, contaminant retention is highly dependent on the initial oxidation state at which the metal was introduced, as well as the matrix sorption ability, ability to resist oxidation and carbonation, and the contaminant leachability. Moreover, carbonation in considered one of the most important degradation mechanisms in cementitious material, causing porosity reduction and significant changes in contaminant leachability, however, geo-polymers have considerably lower Ca content relative to cements, or none, and the effect of carbonation on these pastes is less clear. Thus, contaminant release mechanisms and rates must be estimated based upon exposure to various atmospheres appropriate to waste management applications. In this study we aim to estimate the sorption capacity, and leachability of Cr from a meta-kaolin based geo-polymer, doped with Cr, as a function of its oxidation state and carbonation. Cr has a high valance range from +6 to 0 similar to Tc, and is used as its simulant in the current study. Sodium dichromate was used as an oxidized source metal material. To induce reducing conditions, ascorbic acid was added except for experimental control cases. The samples were aged under N{sub 2}, 98% N{sub 2} + 2% CO{sub 2}, CO{sub 2} deficient air and air environments under constant relative humidity. Following aging, samples were subject to equilibrium leaching as a function of pH (EPA Method 1313) and monolith mass transport rate testing (EPA Method 1315). Mass balance calculations, based on the results of a pH dependent leaching test, have shown that oxidized Cr samples lost 85-95% of their Cr content, whereas, the reduced Cr samples lost only 20% of their Cr content. On the other hand, the leachability of Si and Al is much higher in the reduced-Cr samples then in the samples with oxidized Cr, and their natural pH is up to 2.5 pH units lower than that of the oxidizing cases. Thus, we conclude that the combination of the reducing agent and the spike chemistry influence the matrix formation. Sample aging have not resulted in any significant change in the Cr-leaching behavior of the oxidizing matrices in the pH dependent leaching test, although a significant decrease in the natural pH, of 1.5 pH unit, was observed upon exposure to elevated CO{sub 2} levels (2%), probably due to the formation of Na-carbonate species. The pH and leaching behavior of the reduced Cr samples under the various aging conditions have not yielded significant variation either in their natural pH or in their leaching behavior. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of Interactions Between Produced Formation Fluid and Rock Matrix on Pore Structure of Caney Shale, Southern Oklahoma

ABSTRACT: Rock-fluid interactions change properties of shales during exploitation. To investigate effects of rock-fluid interactions on pore structure of shales matrix after hydraulic fracturing, powder samples from two late Mississippian Caney Shale cores in the Ardmore Basin, southern Oklahoma, were used to react with formation produced fluid from the field in the batch reactor analysis. X-ray diffraction for mineralogy and Low-pressure nitrogen adsorption isotherms for pore structure were measured for original, after-7days, and after-30days samples. Results show that the samples consist mainly of quartz, followed by clay minerals, carbonates, and feldspar. The pore sizes of micropore (<2 nm) and mesopore (2-50 nm) increase 14%-233% due to dissolution of pyrite, feldspar, and carbonates after 7 days. Due to the transformation from smectite to illite and the increase of pore size, the specific surface area (SSA) decreases after 7-days interactions. After 30-days interactions, the micropore volume slightly increases and the mesopore and macropore volume decreases. Due to the decrease of pore size, the SSA of 30-days reacted samples increases correspondingly and is lower (for the clay-rich sample) or higher (for the calcareous sample) than that of the unreacted samples. Findings improve our understanding of dynamic alteration of shale properties during production. 1. INTRODUCTION Energy demand will continuously grow owing to the increasing global population as well as energy consumption (EIA, 2023). On the other hand, shale gas and oil reshaped the energy market in the United States, enabling the United States to become a net-export of natural gas country in 2017 (EIA, 2023). However, shale reservoirs are challenging tight formations that are still poorly understood in the extraction and production of hydrocarbons (Ross and Bustin, 2009; Curtis et al., 2012; Xiong et al., 2015, 2021a; Li Y. et al., 2016; Gong et al., 2019a; Benge et al., 2021; Awejori et al., 2022; Huang et al., 2022). One of the most challenging topics is the rock-fluid interactions post hydraulic fracturing and its subsequent impacts on the pore structures of fractured formation matrix.

Xiong, Fengyang↗

The Influence of Relative Content of a Metal Component in a Dielectric Matrix on the Formation and Dimensions of Cobalt Nanocrystallites in Co{sub x}(MgF{sub 2}){sub 100 –} {sub x} Film Composites

The influence of relative content of a metal component on the phase composition and substructure of Co{sub x}(MgF{sub 2}){sub 100 –} {sub x} in a wide range of x = 16–63 at % is studied by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy. The layers of nanocomposite with a micron thickness have been obtained by the ion-beam sputtering of the target in the argon environment. The results reveal that the relative metal cobalt content in the MgF{sub 2} dielectric matrix strongly affects the phase composition and substructure of nanocomposites. With a lower content of cobalt, it is in the amorphous state in the form of clusters in the MgF{sub 2} nanocrystalline matrix. An increase of cobalt content to x = 29 at % on a sitall substrate and to x = 42 at % on a glass substrate in the X-ray amorphous MgF{sub 2} dielectric matrix leads to the formation of cobalt nanocrystals with a hexagonal crystallographic system, whose sizes are on the order of 10 nm. These are predominately oriented in the basis plane of the (001) hexagonal lattice of α-Со. A further increase of cobalt content to c = 59 at % enlarges the α-Со nanocrystals to ~20 nm with retaining the same orientation. In accordance with a fine structure analysis of XPS spectra of Со 2p and О 1s, cobalt is strongly oxidized on the surface of all the composites; only on the surface of samples with a low content of Co is X‑ray amorphous cobalt found in a metallic state along with cobalt oxide. The IR spectra of these samples with the lowest metal phase content exhibit the pronounced modes from the nanocrystalline MgF{sub 2} dielectric phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗