Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “manufacturing automation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Design and evaluation of a foam-filled hat-stiffened panel concept for aircraft primary structural applications

Geodesically stiffened structures are very efficient in carrying combined bending, torsion, and pressure loading that is typical of primary aircraft structures. They are also very damage tolerant since there are multiple load paths available to redistribute loads compared to prismatically stiffened structures. Geodesically stiffened structures utilize continuous filament composite materials which make them amenable to automated manufacturing processes to reduce cost. The current practice for geodesically stiffened structures is to use a solid blade construction for the stiffener. This stiffener configuration is not an efficient concept and there is a need to identify other stiffener configurations that are more efficient but utilize the same manufacturing process as the solid blade. This paper describes a foam-filled stiffener cross section that is more efficient than a solid-blade stiffener in the load range corresponding to primary aircraft structures. A prismatic hat-stiffener panel design is then selected for structural evaluation in uni-axial compression with and without impact damage. Experimental results for both single stiffener specimens and multi-stiffener panel specimens are presented. Finite element analysis results are presented that predict the buckling and postbuckling response of the test specimens. Analytical results for both the element and panel specimens are compared with experimental results.

Ambur, Damodar R.↗
NASA NTRS1998

Thermomechanical Fatigue Durability of T650-35/PMR-15 Sheet Molding Compound

Although polyimide based composites have been used for many years in a wide variety of elevated temperature applications, very little work has been done to examine the durability and damage behavior under more prototypical thermomechanical fatigue (TMF) loadings. Synergistic effects resulting from simultaneous temperature and load cycling can potentially lead to enhanced, if not unique, damage modes and contribute to a number of nonlinear deformation responses. The goal of this research was to examine the effects of a TMF loading spectrum, representative of a gas turbine engine compressor application, on a polyimide sheet molding compound (SMC). High performance SMCs present alternatives to prepreg forms with great potential for low cost component production through less labor intensive, more easily automated manufacturing. To examine the issues involved with TMF, a detailed experimental investigation was conducted to characterize the durability of a T650-35/PMR-15 SMC subjected to TMF mission cycle loadings. Fatigue damage progression was tracked through macroscopic deformation and elastic stiffness. Additional properties, such as the glass transition temperature (T(sub g) and dynamic mechanical properties were examined. The fiber distribution orientation was also characterized through a detailed quantitative image analysis. Damage tolerance was quantified on the basis of residual static tensile properties after a prescribed number of TMF missions. Detailed microstructural examinations were conducted using optical and scanning electron microscopy to characterize the local damage. The imposed baseline TMF missions had only a modest impact on inducing fatigue damage with no statistically significant degradation occurring in the measured macroscopic properties. Microstructural damage was, however, observed subsequent to 100 h of TMF cycling which consisted primarily of fiber debonding and transverse cracking local to predominantly transverse fiber bundles. The TMF loadings did introduce creep related effects (strain accumulation) which led to rupture in some of the more aggressive stress scenarios examined. In some cases this creep behavior occurred at temperatures in excess of 150 C below commonly cited values for T(sub g). Thermomechanical exploratory creep tests revealed that the SMC was subject to time dependent deformation at stress/temperature thresholds of 150 MPa/230 C and 170 MPa/180 C.

Castelli, Michael G.↗
NASA NTRS1998

Development of Textile Reinforced Composites for Aircraft Structures

NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

Dexter, H. Benson↗
NASA NTRS1993

Robotic Hand

The Omni-Hand was developed by Ross-Hime Designs, Inc. for Marshall Space Flight Center (MSFC) under a Small Business Innovation Research (SBIR) contract. The multiple digit hand has an opposable thumb and a flexible wrist. Electric muscles called Minnacs power wrist joints and the interchangeable digits. Two hands have been delivered to NASA for evaluation for potential use on space missions and the unit is commercially available for applications like hazardous materials handling and manufacturing automation. Previous SBIR contracts resulted in the Omni-Wrist and Omni-Wrist II robotic systems, which are commercially available for spray painting, sealing, ultrasonic testing, as well as other uses.

Source record↗
NASA NTRS2019

Automated Fiber Placement Manufactured Composites for Science Applications

Science instruments with large collecting areas that maintain dimensional stability, such as James Webb Space Telescope and Wide Field Space Telescope, help achieve next generation science advancements. Composite materials often used for science applications include high modulus fibers in cyanate ester matrices to result in dimensionally stable structures with low contamination. Hand lay-up fabrication is the most common approach for science instrument structures. Automated Fiber Placement (AFP) using intermediate modulus fibers is commonplace in aircraft production reducing manufacturing time and increasing quality and consistency. AFP manufacturing for future large science instruments can similarly reduce costs and increase reliability. However, high modulus fibers are more prone to damage than intermediate modulus fibers. This study investigates the manufacturing viability of M55J/RS3C (Tencate) slit tape material using AFP processing. Tencate provides slit tape materials. NASA Langley Research Center (LaRC) manufactured hand layup and AFP lay-up laminates under room temperature for initial trials, Marshall Space Flight Center (MSFC) manufactured AFP laminates under room temperature and elevated temperature conditions to evaluate processing affects. Goddard Space Flight Center (GSFC) tests and evaluates tension and Coefficient of Thermal Expansion (CTE) properties by hand lay-up and AFP slit tape automated manufacturing for large science applications. These results show processing material warm reduces process induced fiber fracture; leading to stiffness and CTE properties consistent with hand lay-up, while observing a slight degradation in tensile strength.

Segal, Kenneth N.↗
NASA NTRS1993

Automated fiber placement composite manufacturing: The mission at MSFC's Productivity Enhancement Complex

Automated fiber placement is a manufacturing process used for producing complex composite structures. It is a notable leap to the state-of-the-art in technology for automated composite manufacturing. The fiber placement capability was established at the Marshall Space Flight Center's (MSFC) Productivity Enhancement Complex in 1992 in collaboration with Thiokol Corporation to provide materials and processes research and development, and to fabricate components for many of the Center's Programs. The Fiber Placement System (FPX) was developed as a distinct solution to problems inherent to other automated composite manufacturing systems. This equipment provides unique capabilities to build composite parts in complex 3-D shapes with concave and other asymmetrical configurations. Components with complex geometries and localized reinforcements usually require labor intensive efforts resulting in expensive, less reproducible components; the fiber placement system has the features necessary to overcome these conditions. The mechanical systems of the equipment have the motion characteristics of a filament winder and the fiber lay-up attributes of a tape laying machine, with the additional capabilities of differential tow payout speeds, compaction and cut-restart to selectively place the correct number of fibers where the design dictates. This capability will produce a repeatable process resulting in lower cost and improved quality and reliability.

Vickers, John H.↗
NASA NTRS2019

Integrated Design and Manufacturing Analysis for Automated Fiber Placement Structures

Automated fiber placement provides many advancements beyond traditional hand layups in terms of efficiency and reliability. However, there are also a variety of unique challenges that arise with automated fiber placement technology. In particular, steering of tows over doubly-curved tool surfaces can result in material overlaps and gaps due to path convergence/divergence, fiber angle deviation, as well defects in the tows themselves such as puckers and wrinkles. Minimization of these defects is traditionally considered a task for the manufacturing discipline. Manufacturing specifications are often created for these defects based on laminate testing and can be inflexible to avoid more tests. Recent efforts have been made under the National Aeronautics and Space Administration (NASA) Advanced Composites Project (ACP) to develop software tools and processes that provide automated coupling between design and manufacturing disciplines. The objective of this coupling is to provide information to the design discipline on the manufacturability of a laminate while the laminate is being designed. A variety of software tools, both existing commercial tools and research tools under development, will be used to achieve this objective: HyperSizer for laminate optimization, the Computer Aided Process Planning module for selection of manufacturing process parameters, Vericut Composite Programming for tow path simulation, and COMPRO for deposition and cure defects. The newly developed “Central Optimizer” tool will be used to tie the modules together and drive the design for manufacturing process.

Noevere, August↗
NASA NTRS2019

Development of a Design for Manufacturing Tool for Automated Fiber Placement Structures

Existing design processes for laminates constructed with automated fiber placement lack significant integration between the various software tools that compose the process. Tools for finite element analysis, computer aided drafting, stress analysis, tool path simulation, and manufacturing defect prediction are all critical parts of the design process. With traditional hand-layup laminates, the analysis performed with each of these tools could be fairly well decoupled from one another. However, for laminates generated by automated fiber placement, the disciplines can become significantly coupled, especially on structures with curvature. This gives rise to a need for integrated “design for manufacturing” software tools that are able to balance the competing objectives from each discipline. This paper describes the preliminary development of such a tool.

Noevere, August T.↗
NASA NTRS1989

Space manufacturing in an automated crystal growth facility

An account is given of a Space Station Freedom-based robotic laboratory system for crystal growth experiments; the robot must interface with both the experimental apparatus and such human input as may be required for control and display. The goal of the system is the simultaneous growth of several hundred protein crystals in microgravity. The robot possesses six degrees-of-freedom, allowing it to efficiently manipulate the cultured crystals as well as their respective growth cells; the crystals produced are expected to be of sufficiently high quality for complete structural determination on the basis of XRD.

Quinn, Alberta W.↗
NASA NTRSDate not supplied

Design for Manufacturing of Structures with Automated Fiber Placement via Integration of Analysis and Process Planning

Under the Design for Manufacturing (DFM) task in the NASA HiCAM program, significant process has been made towards establishing a fully automated optimization process that spans the structural analysis, design, and manufacturing process planning for Automated Fiber Placement (AFP) structures. Previous efforts in this area established the data formats and mapping processes needed to exchange data between disciplines. The software tools used in the framework are HyperX (structural optimization), CAPP (process planning), and VCP (AFP path generation). The work has culminated with automation of data exchanges and an optimization process that drives the three software toward convergence. Within this framework, HyperX is used to generate mass-optimum composite designs which are iterated with VCP and CAPP to improve manufacturability of the designs. As the ply manufacturing process is adjusted by CAPP and VCP, HyperX continually re-assesses the structural integrity of the part and makes adjustments to the laminate as needed. For example, the position of fiber steering and tow overlaps/gaps can necessitate changes to the laminate design. Once the design converges, the end result is a stack of plies that meets both structural and manufacturing requirements. This paper presents the details of the framework and demonstrations the automated process on several parts with significant double-curvature.

HiCAM↗
NASA NTRS1992

International SAMPE Symposium and Exhibition, 37th, Anaheim, CA, Mar. 9-12, 1992, Proceedings

The present conference discusses the industrial and transportation markets for advanced composites, novel NASA and military applications of advanced materials, composite space structures, sandwich structures, composite tooling and processing, advanced epoxy compositions, composites repair, commercial applications of advanced resins, metal-matrix composites, adhesive compositions, ultrahigh-temperature composites, failure analyses, testing methods for composites, and bismaleimides and polyimides. Also discussed are composite structures design, innovations in composite reinforcement, nonautoclave-processed composites, molecular composites, design and manufacture processes with thermoplastics, automation in manufacturing, technologies for large component fabrication, damage-limitation design practices, thermoplastic-matrix composites, industrial applications of composites, and process controls in composites manufacturing.

Grimes, Glenn C.↗
DOE OSTI2020

Software Coordinates Multiple Smart Devices and User Preferences, Redefining "Smart" Homes

NREL developed foresee™ to achieve users' preferences while simplifying the coordination of when and how a home's connected appliances and electronics use energy. This reduces complexity and improves the consistency and diversity of whole-home outcomes. These include enhanced comfort, convenience, reduced costs, and lower environmental impact based on input from the homeowner. The software accounts for time-of-use rates and is compatible with smart products from any manufacturer.

automation↗
NASA NTRSDate not supplied

Manufacturing Trials of Integrally Stiffened Composite Panels Using Automated Fiber Placement

Commercial aircraft structures are frequently manufactured from carbon-epoxy materials because of their weight and stiffness advantages compared to metallic materials. Wing cover panels are regularly manufactured using an automated fiber placement (AFP) process, but current design and manufacturing methodologies do not fully take advantage of the opportunities afforded by AFP. Design and manufacturing studies were undertaken at the NASA Langley Research Center at the Integrated Structural Assembly of Advanced Composites (ISAAC) facility to quantify manufacturing benefits and limitations associated with AFP to create structurally efficient integral stiffeners as an alternative to bonded or mechanically fastened stiffeners. This methodology could save weight and remove failure mechanisms by reducing the need for rivets and bonding materials since the stiffener plies are interleaved within the skin plies. The use of AFP with integral stiffeners can open the design space, but a fundamental, systematic evaluation of manufacturing limitations is necessary. Manufacturing trials are described herein, where considered manufacturing variables included stiffener location, stiffener course staggering, stiffener widths, stiffener intersections, and material thicknesses for both the skin and stiffener plies. The manufacturing process and lessons learned from each trial are described, including the most successful current design which contains staggered stiffeners, non-traditional laminate angles, and a combination of multiple material thicknesses within the same laminate.

Composite manufacturing↗
NASA NTRSDate not supplied

Manufacturing Trials of Integrally Stiffened Composite Panels Using Automated Fiber Placement

Commercial aircraft structures are frequently manufactured from carbon-epoxy materials because of their weight and stiffness advantages compared to metallic materials. Wing cover panels are regularly manufactured using an automated fiber placement (AFP) process, but current design and manufacturing methodologies do not fully take advantage of the opportunities afforded by AFP. Design and manufacturing studies were undertaken at the NASA Langley Research Center at the Integrated Structural Assembly of Advanced Composites (ISAAC) facility to quantify manufacturing benefits and limitations associated with AFP to create structurally efficient integral stiffeners as an alternative to bonded or mechanically fastened stiffeners. This methodology could save weight and remove failure mechanisms by reducing the need for rivets and bonding materials since the stiffener plies are interleaved within the skin plies. The use of AFP with integral stiffeners can open the design space, but a fundamental, systematic evaluation of manufacturing limitations is necessary. Manufacturing trials are described herein, where considered manufacturing variables included stiffener location, stiffener course staggering, stiffener widths, stiffener intersections, and material thicknesses for both the skin and stiffener plies. The manufacturing process and lessons learned from each trial are described, including the most successful current design which contains staggered stiffeners, non-traditional laminate angles, and a combination of multiple material thicknesses within the same laminate.

Automated Fiber Placement↗
DOE OSTI2024

Automated Luminaire Design and Local Manufacturing for Highly Efficient, Customized Lighting Solutions

In response to the growing demand for tailorable and energy-efficient lighting solutions, Eaton and partners Synopsys and Rensselaer Polytechnical Institute were funded to develop an automated luminaire design method that was capable of achieving best in class efficiency while being locally manufactured at an affordable cost. This program was broken into four key technology areas, automated optics design, additively manufactured optical material characterization, printed electronics, and additively manufactured mechanical components.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1980

Preliminary design of graphite composite wing panels for commercial transport aircraft

Subjectively assessed practical and producible graphite/epoxy designs were subjected to a multilevel screening procedure which considered structural functions, efficiency, manufacturing and producibility, costs, maintainability, and inspectability. As each progressive screening level was reviewed, more definitive information on the structural efficiency (weight), manufacturing, and inspection procedures was established to support the design selection. The configuration features that enhance producibility of the final selected design can be used as a generic base for application to other wing panel designs. The selected panel design showed a weight saving of 25 percent over a conventional aluminum design meeting the same design requirements. The estimated cost reduction in manufacturing was 20 percent, based on 200 aircraft and projected 1985 automated composites manufacturing capability. The panel design background information developed will be used in the follow-on tasks to ensure that future panel development represents practical and producible design approaches to graphite/epoxy wing surface panels.

Byers, B. A.↗
DOE OSTI2024

Continuous Polymer Synthesis and Manufacturing of Polyurethane Elastomers Enabled by Automation

Connecting polymer synthesis and processing is an important challenge for streamlining the manufacturing of polymeric materials. In this work, the automated synthesis of acrylate-capped polyurethane oligomers is integrated with vat photopolymerization 3D printing. This strategy enabled the rapid manufacturing of a library of polyurethane-based elastomeric materials with differentiated thermal and mechanical properties. The automated semi-continuous batch synthesis approach proved enabling for resins with otherwise short shelf lives because the intimate connection between synthesis, formulation, and processing. Structure-property studies demonstrated the ability to tune properties through systematic alteration of crosslink density and chemical composition.

36 MATERIALS SCIENCE↗