SEARCH · Engineering Papers
Results for “low temperatures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Low-temperature deposition of low resistivity ZnSe films by reactive sputtering
The use of reactive dc magnetron cosputtering of Zn and the dopant In in an H2Se/Ar gaseous mixture is described. It is observed that initial deposition using pure Zn targets produced yellowish transparent ZnSe films on glass with a film resistivity of 10 to the 8th ohms cm and deposition using a Zn target doped with a fixed 1 percent of In produced ZnSe films with resistivities of about 10,000 ohms cm. The improvement of film conductivity by optimizing the In content in the ZnSe films is discussed; the ZnSe resistivity dependence on In flux is studied. Optical absorption/transmission measurements reveal a photon energy band gap of 2.65 eV at room temperature and X-ray diffraction show highly oriented polycrystalline films on glass with the c axis parallel to the plane of the film. Compositional analysis was performed and the Zn/Se ratio is measure as 48.8/49.0 with an In concentration of 1.16 percent. ZnSe films deposited on glass and conducting SnO2-coated glass substrates with a resistance of 20 ohms cm and a substrate temperature of 120 C have been fabricated.
Resistance thermometer has linear resistance-temperature coefficient at low temperatures
Resistance thermometer incorporating a germanium resistance element with a platinum resistance element in a wheatstone bridge circuit has a linear temperature-resistance coefficient over a range from approximately minus 140 deg C to approximately minus 253 deg C.
Extending the low-temperature operation of sodium metal batteries combining linear and cyclic ether-based electrolyte solutions
Nonaqueous sodium-based batteries are ideal candidates for the next generation of electrochemical energy storage devices. However, despite the promising performance at ambient temperature, their low-temperature (e.g., < 0 °C) operation is detrimentally affected by the increase in the electrolyte resistance and solid electrolyte interphase (SEI) instability. Here, to circumvent these issues, we propose specific electrolyte formulations comprising linear and cyclic ether-based solvents and sodium trifluoromethanesulfonate salt that are thermally stable down to –150 °C and enable the formation of a stable SEI at low temperatures. When tested in the Na||Na coin cell configuration, the low-temperature electrolytes enable long-term cycling down to –80 °C. Via ex situ physicochemical (e.g., X-ray photoelectron spectroscopy, cryogenic transmission electron microscopy and atomic force microscopy) electrode measurements and density functional theory calculations, we investigate the mechanisms responsible for efficient low-temperature electrochemical performance. We also report the assembly and testing between –20 °C and –60 °C of full Na||Na 3 V 2 (PO 4 ) 3 coin cells. The cell tested at –40 °C shows an initial discharge capacity of 68 mAh g –1 with a capacity retention of approximately 94% after 100 cycles at 22 mA g –1 .
A high power, low temperature molten sodium battery
Low temperature molten sodium batteries promise low-cost, grid-scale energy storage using earth-abundant materials. To be economically viable, they must demonstrate high current (power) at relevant discharge times. Here a low temperature (135 °C) molten sodium battery with a NaI–AlCl 3 molten salt catholyte and NaSICON separator is explored, minimizing cell ohmic resistances and avoiding precipitation reactions in the molten salt catholyte. Operating currents were increased by as much as 100× compared to the energy-dense baseline design (197 Wh kg −1 and 248 mAh cm −2 ). Cells were cycled 100 times at 50 mA cm −2 (150 mW cm −2 ), averaging 99.8% coulombic efficiency and 79.7% energy efficiency for 30% of the theoretical capacity. Charging currents up to 250 mA cm −2 (1070 mW cm −2 ) are demonstrated for 10% of the theoretical capacity. Toward extending the accessible capacity in these high current systems, the volume ratio of catholyte molten salt to a graphite felt current collector was varied, altering (1) the local current density in the graphite felt and (2) the discharge time at a fixed current density. Optimizing the catholyte : felt ratio dramatically increased capacity utilization to 60% (102 mAh cm −2 ) at 50 mA cm −2 (150 mW cm −2 ) charge and 10 mA cm −2 discharge. This catholyte : felt ratio of 1.4 significantly decreased the cell impedance, minimizing electrode blocking effects seen previously in NaI–AlCl 3 catholytes. Together, these high areal loadings and impressive power outputs demonstrate how low temperature molten sodium batteries can compete with commercialized sodium systems operating at more than twice the temperature.
A study pertaining to a very low temperature hydrogen maser feasibility
Very low temperature atomic hydrogen masers were developed. The advantages over room temperature hydrogen masers include higher radiated power due to the higher beam intensities possible using low temperature techniques and the much smaller electron spin flip cross section at low temperatures, lower cavity and amplifier noise temperatures, increased stability against mechanical creep at low temperatures, and opportunities to extend H atom collision studies to low temperatures, where quantum effects and details of the interatomic potentials are much more important.
Improved Low Temperature Performance of Supercapacitors
Low temperature double-layer capacitor operation enabled by: - Base acetonitrile / TEATFB salt formulation - Addition of low melting point formates, esters and cyclic ethers center dot Key electrolyte design factors: - Volume of co-solvent - Concentration of salt center dot Capacity increased through higher capacity electrodes: - Zeolite templated carbons - Asymmetric cell designs center dot Continuing efforts - Improve asymmetric cell performance at low temperature - Cycle life testing Motivation center dot Benchmark performance of commercial cells center dot Approaches for designing low temperature systems - Symmetric cells (activated carbon electrodes) - Symmetric cells (zeolite templated carbon electrodes) - Asymmetric cells (lithium titanate/activated carbon electrodes) center dot Experimental results center dot Summary
Low temperature open-air plasma deposition of amorphous tin oxide for perovskite solar cells
Not provided.
HydroGEN: Low Temperature Electrolysis
In low temperature electrolysis (LTE), it is imperative to both enhance and explore durability and demonstrate the opportunities for anion exchange membrane-based water electrolysis (AEMWE). The advantage of alkaline-based systems is primarily reduced capital cost: high pH enabling platinum group metal (PGM)-free catalysts and coatings, and the enhanced stability of those components compared to proton exchange membrane (PEM) -based systems. Compared to the water-only fed AEMWE in previous LTE 2.0 work, supporting electrolytes can allow for a significant improvement in performance through higher site-access and stability by reducing utilization and overpotential stresses that lead to catalyst layer delamination.
High-pressure, low-temperature studies of phase transitions in SrRuO3 – Absence of volume collapse
Not Available
Electrolytes for Li-Ion Cells in Low Temperature Applications
Prototype AA-size lithium-ion cells have been demonstrated to operate effectively at temperatures as low as -30 to -40 C. These improvements in low temperature cell performance have been realized by the incorporation of ethylene carbonate-based electrolytes which possess low melting, low viscosity cosolvents, such as methyl acetate, ethyl acetate, gamma-butyrolactone, and ethyl methyl carbonate. The cells containing a 0.75M LiPF6 EC+DEC+DMC+EMC (1:1:1:1) electrolyte displayed the best performance at -30 C (> 90% of the room temperature capacity at approximately C/15 rate), whereas, at -40 C the cells with the 0.75M LiPF6 EC+DEC+DMC+MA (1:1:1:1) and 0.75M LiPF6 EC+DEC+DMC+EA (1:1:1:1) electrolytes showed superior performance.
Performance of Low Temperature Electrolytes in Experimental and Prototype Li-Ion Cells
Due to their attractive properties and proven success, Li-ion batteries have become identified as the battery chemistry of choice for a number of future NASA missions. A number of these applications would be greatly benefited by improved performance of Li-ion technology over a wider operating temperature range, especially at low temperatures, such as future ESMD missions. In many cases, these technology improvements may be mission enabling, and at the very least mission enhancing. In addition to aerospace applications, the DoE has interest in developing advanced Li-ion batteries that can operate over a wide temperature range to enable terrestrial HEV applications. Thus, our focus at JPL in recent years has been to extend the operating temperature range of Li-ion batteries, especially at low temperatures. To accomplish this, the main focus of the research has been devoted to developing improved lithium-ion conducting electrolytes. In the present paper, we would like to present some of the results we have obtained with ethylene carbonate-based electrolytes optimized for low temperature in experimental MCMB-LiNixCo1_x0 2 cells. In addition to obtaining discharge and charge rate performance data at various temperatures, electrochemical measurements were performed on individual electrodes (made possible by the incorporation of Li reference electrodes), including EIS, linear polarization and Tafel polarization measurements. The combination of techniques enables the elucidation of various trends associated with electrolyte composition. In addition to investigating the behavior in experimental cells, the performance of many promising low temperature electrolytes was demonstrated in large capacity, aerospace quality Li-ion prototype cells. These cells were subjected to a number of performance tests, including discharge rate characterization, charge rate characterization, cycle life performance at various temperatures, and power characterization tests.
High-pressure and low-temperature structural study of claudetite I, a monoclinic layered As 2 O 3 polymorph
High-pressure structural studies of claudetite I reveal that it exhibits the lowest As coordination numbers despite being the densest As 2 O 3 polymorph.
Mechanistic Insights on the Low-Temperature Oxidation of CO Catalyzed by Isolated Co Ions in N-Doped Carbon
Isolated cobalt ions on nitrogen-doped carbon (Co-N-C) catalyze CO oxidation at temperatures as low as 196 K, but the active site and mechanism for this reaction remain elusive. In this work, steady-state CO oxidation around 273 K over Co-N-C revealed nearly first order behavior in both CO and O 2 as well as a negative apparent activation energy. Isotopic transient analysis of the reaction confirmed a rapid turnover frequency and low surface coverage of adsorbed intermediates leading to CO 2 (< 10% of the Co). Results from kinetics experiments combined with quantum chemical calculations and molecular dynamics simulations are consistent with a reaction path involving weak adsorption of CO onto Co ions followed by a low barrier for the CO-assisted activation of weakly adsorbed O 2 . Furthermore, this proposed mechanism for dioxygen activation does not involve a redox cycle with the transition metal ion and may be important in other low temperature catalytic reactions involving O 2 .
Low-Temperature Seal for Actuator Rod
Combination bearing and seal used on Space Shuttle functions reliably at temperatures as low as - 160 degrees F and as high as + 130 degrees F. Corrosion-resistant stainless-steel spacer separates secondary and primary seals in both old and new versions of seal assembly. In new version, combination of flexible sealing lip and bridge is less susceptible to cracking at low temperatures.
Assessment of Various Low Temperature Electrolytes in Prototype Li-Ion Cells Developed for ESMD Applications
Due to their attractive properties and proven success, Li-ion batteries have become identified as the battery chemistry of choice for a number of future NASA missions. A number of these applications would be greatly benefited by improved performance of Li-ion technology over a wider operating temperature range, especially at low temperatures, such as future ESMD missions. In many cases, these technology improvements may be mission enabling, and at the very least mission enhancing. In addition to aerospace applications, the DoE has interest in developing advanced Li-ion batteries that can operate over a wide temperature range to enable terrestrial HEV applications. Thus, our focus at JPL in recent years has been to extend the operating temperature range of Li-ion batteries, especially at low temperatures. To accomplish this, the main focus of the research has been devoted to developing improved lithium-ion conducting electrolytes. In the present paper, we would like to present some of the results we have obtained with six different ethylene carbonate-based electrolytes optimized for low temperature. In addition to investigating the behavior in experimental cells initially, the performance of these promising low temperature electrolytes was demonstrated in large capacity, aerospace quality Li-ion prototype cells, manufactured by Yardney Technical Products and Saft America, Inc. These cells were subjected to a number of performance tests, including discharge rate characterization, charge rate characterization, cycle life performance at various temperatures, and power characterization tests.