High Selectivity Benzoquinone Production from Oxidative Depolymerization of Poplar Lignin
Explore the source record for details and available documents.
Han, Yinglei↗
SEARCH · Engineering Papers
Results for “lignin depolymerization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High Selectivity Benzoquinone Production from Oxidative Depolymerization of Poplar Lignin
Explore the source record for details and available documents.
Han, Yinglei [Sandia National Laboratories (SNL-CA↗
Funneled Depolymerization of Ionic Liquid-Based Biorefinery “Heterogeneous” Lignin into Guaiacols over Reusable Palladium Catalyst
The efficient utilization of lignin, the direct source of renewable aromatics, into value-added renewable chemicals is an important step towards sustainable biorefinery practices. Nevertheless, owing to the random heterogeneous structure and limited solubility, lignin utilization has been primarily limited to burning for energy. The catalytic depolymerization of lignin has been proposed and demonstrated as a viable route to sustainable biorefinery, however, low yields and poor selectivity of products, high char formation, and limited to no recycling of transition-metal-based catalyst involved in lignin depolymerization demands attention to enable practical-scale lignocellulosic biorefineries. In this study, we demonstrate the catalytic depolymerization of ionic liquid-based biorefinery poplar lignin into guaiacols over a reusable zirconium phosphate supported palladium catalyst. The essence of the study lies in the high conversion (>80 %), minimum char formation (7–16 %), high yields of guaiacols (up to 200 mg / g of lignin), and catalyst reusability. In conclusion, both solid residue, liquid stream, and gaseous products were thoroughly characterized using ICP-OES, PXRD, CHN analysis, GC-MS, GPC, and 2D NMR to understand the hydrogenolysis pathway.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Multiscale molecular simulations for the solvation of lignin in ionic liquids
Lignin, the second most abundant biopolymer found in nature, has emerged as a potential source of sustainable fuels, chemicals, and materials. Finding suitable solvents, as well as technologies for efficient and affordable lignin dissolution and depolymerization, are major obstacles in the conversion of lignin to value-added products. Certain ionic liquids (ILs) are capable of dissolving and depolymerizing lignin but designing and developing an effective IL for lignin dissolution remains quite challenging. To address this issue, the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) model was used to screen 5670 ILs by computing logarithmic activity coefficients (ln(γ)) and excess enthalpies (H E ) of lignin, respectively. Based on the COSMO-RS computed thermodynamic properties (ln(γ) and H E ) of lignin, anions such as acetate, methyl carbonate, octanoate, glycinate, alaninate, and lysinate in combination with cations like tetraalkylammonium, tetraalkylphosphonium, and pyridinium are predicted to be suitable solvents for lignin dissolution. The dissolution properties such as interaction energy between anion and cation, viscosity, Hansen solubility parameters, dissociation constants, and Kamlet–Taft parameters of selected ILs were evaluated to assess their propensity for lignin dissolution. Furthermore, molecular dynamics (MD) simulations were performed to understand the structural and dynamic properties of tetrabutylammonium [TBA] + -based ILs and lignin mixtures and to shed light on the mechanisms involved in lignin dissolution. MD simulation results suggested [TBA] + -based ILs have the potential to dissolve lignin because of their higher contact probability and interaction energies with lignin when compared to cholinium lysinate.
09 BIOMASS FUELS↗
Microbial valorization of lignin to malic acid by Aspergillus niger
Lignin is the largest renewable source of aromatic carbon, yet its heterogeneity and recalcitrance limit its use in higher-value bioconversion processes. In this study, Aspergillus niger was engineered to enable the bioconversion of lignin-derived aromatics and base-catalyzed depolymerized (BCD) lignin streams into malic acid, a value-added C4 dicarboxylic acid with broad industrial relevance. Overexpression of the C4 dicarboxylate transporter C4T318 from Aspergillus oryzae enhanced malic acid secretion, while medium optimization under buffered conditions further improved the production. The engineered strain efficiently assimilated representative lignin-derived aromatics, including 4-hydroxybenzoic acid and p-coumaric acid, producing up to 3.9 g/L malic acid. Conversion of BCD lignin liquors from poplar and sorghum demonstrated effective utilization of heterogeneous aromatic mixtures, generating up to 0.82 g/L malic acid. This work demonstrates direct fungal conversion of real lignin streams into malic acid and establishes A. niger as a promising platform for sustainable lignin valorization.
Aromatic bioconversion↗
Lignin monomer conversion into biolubricant base oils
Despite progress in the depolymerization of lignin, only a few studies convert the obtained monomers to value-added products. Here we introduce a strategy to synthesize branched benzene lubricant (BBL) and branched cyclic lubricant (BCL) base oils from lignin-derived monomers and aldehyde. We perform carbon–carbon coupling via Brønsted acid-catalyzed hydroxyalkylation/alkylation (HAA) then hydrodeoxygenation (HDO). Optimum HAA reaction conditions achieve up to 90% guaiacol conversion and an HAA product containing 76% BBL and 24% enal condensation product over a P-SiO 2 catalyst. Subsequent HDO of HAA products over an Ir-ReO x /SiO 2 catalyst produces a lubricant-ranged mixture of BCL (C 24 ) up to yield (82%) and small fractions of dodecyl cyclohexane and C 10 and C 15 carbons alkanes. The kinematic viscosity, viscosity index, and Noack volatility of these base oils are comparable to commercial petroleum-derived poly α-olefin Group IV and refrigerant base oils. In conclusion, this approach provides a sustainable pathway for replacing petroleum-derived base oils.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Depolymerization of LDPE and Lignin for Bioconversion through Sulfonation Followed by Fenton Reaction.
Abstract not provided.
Kent, Michael↗
Deep Eutectic Solvents for Efficient Fractionation of Lignocellulose to Produce Uncondensed Lignin and High-Quality Cellulose
Simultaneously inhibiting lignin condensation and cellulose degradation remains a major challenge for achieving holistic valorization of lignocellulose. Here, we developed a deep eutectic solvent (DES), composed of l-cysteine (Cys) and lactic acid (LA), to fractionate both uncondensed lignin and high-quality cellulose from eucalyptus wood by leveraging the unique properties of Cys, i.e., highly nucleophilic groups (–SH) and hydrogen bond acceptor/donor groups (–NH 2 and –COOH). The nucleophilic –SH in Cys effectively quenches the benzylic carbocations (C α + ions, formed at the benzylic sites of lignin) that lead to lignin condensation. This enables the high yield of uncondensed lignin (81%) with high retention of β–O–4 bonds (up to 90%). The separated uncondensed lignin is further depolymerized to prepare monophenols in a satisfactory 43% yield, equivalent to 73% of the theoretical yield. Moreover, the –NH 2 and –COOH groups in Cys form extensive hydrogen bonds with the hydroxyl groups in cellulose, thus decreasing the interaction energy of DES on cellulose. As a result, the cellulose achieves an astonishing 99% retention and maintains a high degree of polymerization of 1160. The obtained high-quality cellulose is further conversed into cellulose nanofibers for strong and transparent films. Furthermore, this study provides new insights into the efficient separation of uncondensed lignin and high-quality cellulose from lignocellulose by a novel DES system.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of Solvent on the Interaction of Lignin with a Zeolite Nanosheet in the Condensed Phase
Lignin is the essential building block of lignocellulosic biomass, an excellent renewable source of different aromatic monomers for the polymer and biofuel industry. The depolymerization of lignin into value-added chemicals and fuels through the catalytic process poses a significant challenge due to the complex structure of lignin. Understanding lignin’s conformational diversity and dynamics in the liquid phase is crucial to designing an effective depolymerization process. Here, we conducted all-atom molecular dynamics simulations to understand the conformation and dynamics of softwood lignin on the all-silica zeolite nanosheet based on the MFI topology in a binary mixture of water–methanol at three different molar compositions (0%, 50%, and 100% methanol). We observed that the methanol–surface interaction is stronger than the water–surface interaction, and methanol readily diffused into the MFI core. Lignin surface contacts decrease with increasing methanol composition due to higher solubility and dynamics. Lignin dynamics on the surface in neat water is an order of magnitude smaller than methanol. Here, we also found that lignin adopts a slightly extended conformation when it stays on the surface than in the bulk solution phase for the pure water case, whereas for pure methanol and the binary solution structures are statistically similar.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Highly swellable hydrogels prepared from extensively oxidized lignin
Biopolymers such as lignin are gaining renewed appeal due to the need for sustainable materials. Herein, we used chelator-mediated Fenton (CMF) chemistry to oxidize Kraft lignin to develop sustainable super absorbent materials. The CMF chemistry adds oxygen, opens aromatic rings and increases COOH content, producing hydrophilic lignin without depolymerization. UV absorption, molecular weight, elemental analysis, and titration were used to study the chemical compositions of CMF-processed lignin. Then the chemically modified hydrophilic lignin was used to produce lignin-based hydrogels utilizing an aqueous polymerization and cross-linking reaction that enabled tunable properties. The resulting lignin hydrogels absorbed water up to 96% and swelled up to 2400%, as well as being re-swellable in water. These lignin-based hydrogels may be applicable in water-absorbing products in consumer goods and agriculture.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Microbial assimilation of lignin-derived aromatic compounds and conversion to value-added products
Lignin is an abundant and sustainable source of aromatic compounds that can be converted to value-added products. However, lignin is underutilized, since depolymerization produces a complex mixture of aromatic compounds that is difficult to convert to a single product. Microbial conversion of mixed aromatic substrates provides a potential solution to this conversion challenge. Recent advances have expanded the range of lignin-derived aromatic substrates that can be assimilated and demonstrated efficient conversion via central metabolism to new potential products. Here, the development of additional non-model microbial hosts and genetic tools for these hosts have accelerated engineering efforts. However, yields with real depolymerized lignin are still low, and additional work will be required to achieve viable conversion processes.
59 BASIC BIOLOGICAL SCIENCES↗
Pd/C promotes C–H bond activation and oxidation of p -hydroxybenzoate during hydrogenolysis of poplar
Hydrogenolysis of lignin generates a portfolio of products, the yields of which are generally calculated using a subset of phenolic monomers that are dependent on the lignin composition, product distribution, and analytical technique. Some lignins are naturally γ-acylated; poplar lignins, for example, have p-hydroxybenzoate groups on 1–15% of their syringyl subunits. Upon hydrogenolysis, it is generally assumed that the p-hydroxybenzoate is cleaved before the deacylated lignin is depolymerized. Hydrogenolysis of model γ-p-hydroxybenzoylated β-aryl ethers do not, however, produce the deacylated β-aryl ether intermediates, as was previously conjectured; products instead derive from palladium-assisted reactions on the cinnamyl p-hydroxybenzoates resulting in initial β-ether cleavage. The p-hydroxybenzoate moiety itself also undergoes carboxylate-assisted palladium-catalyzed C–H bond activation to form the 2,4-dihydroxybenzoate, that subsequently converts to the 2,4-dihydroxycyclohex-1-enoate. Furthermore, these details underscore previously unrecognized pathways and products that are key to understanding the different hydrogenolysis product distributions from naturally acylated lignins that are prevalent biomass-conversion feedstocks.
09 BIOMASS FUELS↗
Reductive catalytic fractionation of cotton stalks: catalytic strategy for tuning the selectivity of phenolic monomers
Pretreatment of lignocellulosic biomass is a primary step to delink lignin from the lignin-carbohydrate complex for bioethanol production and other value-added products. Presently, these processes yield lignin (technical) with significant structural changes compared to native lignin and make it difficult to valorize. Reductive catalytic fractionation (RCF) is an advanced pretreatment process to valorize native lignin to selective phenolic monomers before capitalizing on carbohydrates. Herein, cotton stalks (CS) were pretreated with ethanol: water mixture catalyzed by bimetallic, Ru-Ni/HY (RNY) and Ru-Fe/HY (RFY), and trimetallic, Ru-Fe-Ni/HY (RFNY), catalysts using the endogenously produced H 2 . The favorable catalytic properties of the RFNY catalyst, including high reducibility, acidity, metal dispersion, the synergistic effect of all the metals, and appropriate pore and particle size resulted in the highest catalytic activity. Maximum 92% delignification efficiency was achieved with 91% holocellulose retention. The extracted lignin after depolymerization in the same step produced a 19 wt.% yield of phenolic monomers. Increasing the duration of the reaction from 2 to 6 h increased the selectivity to saturated alkyl chain phenolics (1 to 16 wt.%) at the expense of hemicellulose (50 to 9%). The fate of carbohydrates left behind after the RCF (CS-RCF) process was analyzed through enzymatic saccharification and compared with raw CS and acid-pretreated CS. In conclusion, CS-RCF yielded maximum glucose yield (45 g/L) within an incubation period of 72 h.
09 BIOMASS FUELS↗
Systems Engineering of Rhodococcus opacus to Enable Production of Drop-in Fuels from Lignocellulose
Production of drop-in fuels from lignocellulose using Rhodococcus opacus PD630 (hereafter R. opacus) is a challenging goal. During the grant period we have pushed the field forward significantly in several areas of research. Towards the end goal of accelerating the adoption of R. opacus in biofuel production, during the grant period we have expanded the phenotypic characterization of R. opacus grown in single aromatic (model lignocellulosic) compounds or their mixtures, modeling the growth conditions in lignocellulosic biomass. Harnessing the power of adaptive evolution, we produced evolved R. opacus isolates with superior lignin valorization capabilities and identified differentially expressed genes and pathways after adaptation. We used next generation multi-omic techniques such as genomic, transcriptomic, and metabolomic analyses, to identify the catabolic pathways used by R. opacus to degrade aromatic compounds and funnel these degradation products into central metabolism, as well as the aromatic transport genes required for increased tolerance and utilization. Taking this information one step further, we identified endogenous transcription factors and regulatory mechanisms important for degradation of five model aromatic compounds. To accurately estimate R. opacus growth and consumption on model lignin compounds we pioneered the use of novel extraction procedures prior to GC-MS analysis. Alongside 13 C-metabolic flux analysis, we have elucidated the metabolic routes preferred by Rhodococcus opacus during aromatic compound degradation. Finally, we used in tandem lipidomics and high-resolution mass spectrometry to identify the modulation of mycolic acids and phospholipid membrane composition modification as a strategy for aromatic tolerance in R. opacus. Being a non-model organism, R. opacus lacks the breadth of tools and technical foundation which drive biofuel research in more well-understood microbes such as Escherichia coli. To reduce this burden for use, we designed and produced new tools for genomic manipulation and engineering in R. opacus. These engineering breakthroughs support efficient genomic editing, enabling gene overexpression, repression, and genetic alteration. Using these tools, we have generated synthetically engineered strains with increased lipogenesis and growth, both positive traits required for increased lignin valorization. Optimizing engineered strains for biofuel production from lignocellulose requires extremely sophisticated synthetic rewiring of metabolism. To facilitate systems-level reorganization of metabolism in R. opacus, we created a genome-scale model that accurately predicts metabolic flux and growth rates on the aromatic compound phenol. Lignin requires extensive pre-treatment before biological degradation by R. opacus. Towards an eventual goal of degrading real-world lignin, we developed new depolymerization processes to generate lignin breakdown products (LBP). We optimized LBP storage and composition analysis techniques, enabling accurate prediction of specific LBP compound integration into cell wall components. Overall, through the work funded by this grant we generated 20 manuscripts (17 published, 3 in review/preparation), methods for increased accuracy in metabolomics of aromatic compounds, multiple genetic tools for altering the R. opacus genome, genome scale models for predicting flux through metabolic pathways, as well as multi-omic data for community use. The work funded by this grant has increased the knowledge of aromatic degradation in bacteria and advanced our efforts to optimize R. opacus for lignin valorization.
09 BIOMASS FUELS↗
Computational Advances in Ionic Liquid Applications for Green Chemistry: A Critical Review of Lignin Processing and Machine Learning Approaches
The valorization and dissolution of lignin using ionic liquids (ILs) is critical for developing sustainable biorefineries and a circular bioeconomy. This review aims to critically assess the current state of computational and machine learning methods for understanding and optimizing IL-based lignin dissolution and valorization processes reported since 2022. The paper examines various computational approaches, from quantum chemistry to machine learning, highlighting their strengths, limitations, and recent advances in predicting and optimizing lignin-IL interactions. Key themes include the challenges in accurately modeling lignin’s complex structure, the development of efficient screening methodologies for ionic liquids to enhance lignin dissolution and valorization processes, and the integration of machine learning with quantum calculations. These computational advances will drive progress in IL-based lignin valorization by providing deeper molecular-level insights and facilitating the rapid screening of novel IL-lignin systems.
09 BIOMASS FUELS↗
Biochemical and structural characterization of a sphingomonad diarylpropane lyase for cofactorless deformylation
Lignin valorization is being intensely pursued via tandem catalytic depolymerization and biological funneling to produce single products. In many lignin depolymerization processes, aromatic dimers and oligomers linked by carbon–carbon bonds remain intact, necessitating the development of enzymes capable of cleaving these compounds to monomers. Recently, the catabolism of erythro -1,2-diguaiacylpropane-1,3-diol ( erythro -DGPD), a ring-opened lignin-derived β-1 dimer, was reported in Novosphingobium aromaticivorans . The first enzyme in this pathway, LdpA (formerly LsdE), is a member of the nuclear transport factor 2 (NTF-2)-like structural superfamily that converts erythro -DGPD to lignostilbene through a heretofore unknown mechanism. In this study, we performed biochemical, structural, and mechanistic characterization of the N. aromaticivorans LdpA and another homolog identified in Sphingobium sp. SYK-6, for which activity was confirmed in vivo. For both enzymes, we first demonstrated that formaldehyde is the C 1 reaction product, and we further demonstrated that both enantiomers of erythro -DGPD were transformed simultaneously, suggesting that LdpA, while diastereomerically specific, lacks enantioselectivity. We also show that LdpA is subject to a severe competitive product inhibition by lignostilbene. Three-dimensional structures of LdpA were determined using X-ray crystallography, including substrate-bound complexes, revealing several residues that were shown to be catalytically essential. We used density functional theory to validate a proposed mechanism that proceeds via dehydroxylation and formation of a quinone methide intermediate that serves as an electron sink for the ensuing deformylation. Overall, this study expands the range of chemistry catalyzed by the NTF-2-like protein family to a prevalent lignin dimer through a cofactorless deformylation reaction.
09 BIOMASS FUELS↗
A simultaneous depolymerization and hydrodeoxygenation process to produce lignin-based jet fuel in continuous flow reactor
Economical production of lignin-based jet fuel (LJF) can improve the sustainability of sustainable aviation fuels (SAFs) as well as can reduce the overall greenhouse gas emissions. However, the challenge lies in converting technical lignin polymer from biorefinery directly to jet fuel in a continuous operation. In this work, we demonstrate a simultaneous depolymerization and hydrodeoxygenation (SDHDO) process to produce lignin-based jet fuel from the alkali corn stover lignin (ACSL) using engineered Ru-HY-60-MI catalyst in a continuous flow reactor at first time. The maximum carbon yield of LJF of 17.9wt% was obtained, and it comprised of 60.2wt% monocycloalkanes, and 21.6wt% polycycloalkanes. Catalyst characterization of Ru-HY-60-MI suggested there was no significant change in HY zeolite structure and its crystallinity after catalyst engineering. Catalyst characterizations performed post the SDHDO experiments indicate presence of carbon and K content in the catalyst. K content presence in the spent catalyst was due to K + ion was exchanged between lignin solution and HY-60 while carbon presence validated the SDHDO chemistry on the catalyst surface. Tier a fuel property testing indicates that LJF production using SDHDO chemistry can offer SAF with high compatibility, good sealing properties, low emissions, and high energy density for aircraft.
09 BIOMASS FUELS↗
Functionalized benzylamines from commercial kraft lignin
Benzylamines are key intermediates in pharmaceuticals, agrochemicals, and polymers, but their conventional production relies on benzyl chloride - a petroleum-derived compound with high toxicity and energy demands. Lignin, accounting for up to 30% of plant biomass, is the largest renewable source of aromatic carbon on Earth. However, its highly complex and recalcitrant structure poses a major barrier to efficient conversion into high-value chemicals. Here, in this study, we developed a catalytic approach to convert commercial kraft lignin into phenolic benzylamines through selective depolymerization and subsequent functionalization. We systematically evaluated the effects of three alcohol solvents, formic acid (FA), and a ruthenium-on‑carbon (Ru/C) catalyst on monophenol yield and selectivity. Up to 6.5 wt% monophenol yield was achieved using methanol (MeOH), FA, and Ru/C at 300 °C for 2 h. Quantum thermodynamic simulations based on the COSMO-RS model confirmed the superior solvation and reactivity of the MeOH + FA system, rationalizing observed product yield. The purified monophenolic products, primarily guaiacol and alkyl guaiacols, were then converted into functionalized benzylamines with >90% yield via a multicomponent Mannich reaction under mild conditions. Techno economic analysis (TEA) and life cycle assessment (LCA) underscore the importance of improving lignin depolymerization yields and expanding biorefinery scale. Solvent-only configurations outperform other options in both cost and emissions, with the methanol-only case performing the best ($\$$105 /kg and 26 kg CO 2e /kg) at a large-scale facility. This study establishes a scalable, bio-based pathway for producing benzylamines from commercial kraft lignin, advancing lignin valorization and offering a sustainable alternative to produce petrochemical-based benzylamines.
Catalytic reduction↗