Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Light Lithophile Elements in Natural and Experimental Phases in Martian Basalts: Implications for the Degassing of Water from Martian Magmas

Lentz et al. argued that zoning trends in light lithophile elements (LLE) in pyroxene in Shergotty and Zagami are evidence for the degassing of magmatic water. We tested this inference by obtaining: additional LLE analyses of Shergotty and Zagami pyroxene; analyses of Pasamonte pyroxene; and silicate and phosphate partition coefficients for B and Li for martian magma and mineral compositions.

Herd, C. D. K.↗
NASA NTRS1977

Effects of radiation upon the light-sensing elements of the retina as characterized by scanning electron microscopy

A model system using Necturus maculosus, the common mudpuppy, was established for evaluating effects of radiation upon the light-sensing elements of the retina. Accelerated heavy ions of helium and neon from the Berkeley Bevalac were used. A number of criteria were chosen to characterize radiation damage by observing morphological changes with the scanning electron microscope. The studies indicated retina sensitivity to high-LET (neon) particles at radiation levels below 10 rads (7 particles per visual element) whereas no significant effects were seen from fast helium ions below 50 rads.

Malachowski, M. J.↗
NASA NTRSDate not supplied

Initial analysis of “stone” size Ryugu samples: current status

As a part of the initial analysis of the Ryugu samples, we perform a variety of analyses of millimeter-sized "stones". Our goals are to elucidate the entire formation process of C-type asteroid Ryugu from the viewpoint of petrology and mineralogy ande obtain necessary information by sample analysis, and then simulate the formation of Ryugu based on the evidencef obtained rom sample analysis. Eighteen stones (8 from Room A and 10 from Room C) were received from the ISAS curation facility on June 1, 2021, and brought into a fully nitrogen-displaced glove box at Tohoku University. At the same time, we also received the powder samples from Room A and Room C. To completely block the atmosphere from leaking into the container, all samples were put in the sample transport containers prepared by ISAS, transferred from the main chamber to the glovebox at ISAS, and then all containers were completely sealed in plastic bags with moisture and oxygen absorbers. No moisture or oxygen was detected when the bags were opened in the glove box at Tohoku University, so it was confirmed that there was no exposure to the atmosphere during transport. To date, a number of analyses have been carried out successfully and almost on schedule. The analysis started with the measurement of reflectance spectra, which are sensitive to atmospheric oxidation, hydroxylation, and adsorbed water. The visible, near-infrared, and mid-infrared reflectance spectra were measured while the samples were kept airtight. The spectra of powder samples and stone samples (as aggregates and as single stone) were successfully obtained. A major feature of the stone team's analysis is the use of synchrotron radiation facilities around the world. Since this analysis is non-destructive, stone samples whose reflectance spectra were measured were sent to KEK, SPring-8, ESRF (France), SOLEIL (France), DESY (Germany), and APS (USA). Using these synchrotron radiation facilities, high spatial resolution and sensitivity XRD, STXM, XANES, CT [1], IR-CT, FT-IR [2, 3], XRF, and Mössbauer analyses were performed. Most of the analyses were carried out under air-tight conditions on the stone samples and the particulates separated from the stone samples. These analyses allowed us to determine the three-dimensional distribution of minerals and elements, redox state, density and porosity of the stone samples. Furthermore, as a characteristic analysis of the stone team, light elemental analysis using negative Muon was performed at the MLF facility of J-PARC with an exceptionally long allocation of machine time. This is the only non-destructive method to measure the concentration of light elements in the whole (not the surface) of stone samples. Because the characteristic X-rays produced by muon irradiation are much higher in energy than the fluorescent X-rays produced by X-ray irradiation, there is little effect of self-absorption by the sample, and therefore, the concentration of light elements such as carbon, oxygen, and Na in the entire "stone" sample can be determined. Some stone samples are currently being measured for heat and strength physical properties in order to understand the physical properties of asteroid Ryugu. The data obtained from these measurements are useful for interpreting the remote-sensing data data taken from the surface layer of the asteroid Ryugu [4-7]. It is also important for understanding the behavior of the Ryugu material during impact events. The surfaces of many stone samples were observed by electron microscopy and other techniques, especially on natural “flat” surfaces formed on 5 stomes. As a result, characteristric mineral aggregates formed by the reactions with water and characteiristic impact features were observed on some of the samples. Based on the observations of surfaces and the synchrotron measurements of the whole stones, important objects such as characteristic structures and specific crystal aggregates for understanding the formation history of the asteroid were identified, and these parts were separated from the stone samples using an Xe beam (pFIB) and analyzed by various methods including transmission electron microscopy and synchrotron radiation analysis. Many stone samples, from which important objects have been separated, are embedded in epoxy resin and cut to produce many polished sections. Electron microscopy and spectroscopic measurements of the polished surfaces are being carried out to reveal the detailed mineralogical properties and elemental distribution inside the stone samples. In the fall, machine time for synchrotron radiation will begin, and we plan to analyze single crystals and characteristic objects separated from the stone samples.

Tomoki Nakamura↗
NASA NTRS2018

Computer Controlled Solid State Lighting Assembly to Emulate Diurnal Cycle and Improve Circadian Rhythm Control

A light system can simultaneously emulate more than one different diurnal cycle to individually improve circadian rhythm control for more than one observer by having each light fixture autonomously self-controlled. Each light fixture is mountable in respective locations to individually treat respective observers. Each light fixture includes one or more light elements mounted to a housing and are controllable to emit a selected light intensity at a selected light temperature. A micro controller is contained in the housing and includes memory containing instructions for one or more automatic diurnal cycle protocols. The micro controller is in communication with the memory and the one or more light elements to execute the instructions to configure the light fixture to vary the light intensity and the light temperature of the emitted light.

Holbert, Eirik↗
NASA NTRS2006

Sulfur in Earth's Mantle and Its Behavior During Core Formation

The density of Earth's outer core requires that about 5-10% of the outer core be composed of elements lighter than Fe-Ni; proposed choices for the "light element" component of Earth's core include H, C, O, Si, S, and combinations of these elements [e.g. 1]. Though samples of Earth's core are not available, mantle samples contain elemental signatures left behind from the formation of Earth's core. The abundances of siderophile (metal-loving) elements in Earth's mantle have been used to gain insight into the early accretion and differentiation history of Earth, the process by which the core and mantle formed, and the composition of the core [e.g. 2-4]. Similarly, the abundance of potential light elements in Earth's mantle could also provide constraints on Earth's evolution and core composition. The S abundance in Earth's mantle is 250 ( 50) ppm [5]. It has been suggested that 250 ppm S is too high to be due to equilibrium core formation in a high pressure, high temperature magma ocean on early Earth and that the addition of S to the mantle from the subsequent accretion of a late veneer is consequently required [6]. However, this earlier work of Li and Agee [6] did not parameterize the metalsilicate partitioning behavior of S as a function of thermodynamic variables, limiting the different pressure and temperature conditions during core formation that could be explored. Here, the question of explaining the mantle abundance of S is revisited, through parameterizing existing metal-silicate partitioning data for S and applying the parameterization to core formation in Earth.

Chabot, Nancy L.↗
NASA NTRS1998

Analysis of New Orion Gamma Ray Data and Monte Carlo Simulations of BATSE Gamma Ray Bursts

These studies were stimulated by the reported COMPTEL detection of nuclear gamma ray line emission from the Orion star formation region. Although the observation have very recently been retracted, the detailed analyses that we carried out clearly showed that the low energy cosmic rays that would have been required to explain the reported fluxes were exceedingly restrictive and thus highly improbable. Moreover, these studies proved to be the trigger for very productive new work. In particular, they led us into carefully re-examining the problem of the origin of the light elements, Li, Be and B, where we showed that the light elements could, in fact, be produced primarily by Galactic cosmic rays and did not require an unobserved low energy cosmic ray source , as had been suggested. We further showed that the observed abundances of Be and B in old halo stars contradicted the common belief that the Galactic cosmic rays were accelerated out of the well mixed interstellar medium, and required instead that they be accelerated out of freshly synthesized matter from supernovae. This work, in turn, led us to propose a new origin of Galactic cosmic rays from the refractory grains in supernova enriched cores of superbubbles.

Lingenfelter, Richard E.↗
NASA NTRS1998

Theoretical Studies in Gamma-Ray Astrophysics

These studies were stimulated by the reported COMPTEL detection of nuclear gamma ray line emission from the Orion star formation region. Although the observation have very recently been retracted, the detailed analyses that we carried out clearly showed that the low energy cosmic rays that would have been required to explain the reported fluxes were exceedingly restrictive and thus highly improbable. More importantly, these studies proved to be the trigger for very productive new work. In particular, they led us into carefully re-examining the problem of the origin of the light elements, Li, Be and B, where we showed that the light elements could, in fact, be produced primarily by Galactic cosmic rays and did not require an unobserved low energy cosmic ray source , as had been suggested. We further showed that the observed abundances of Be and B in old halo stars contradicted the common belief that the Galactic cosmic rays were accelerated out of the well mixed interstellar medium, and required instead that they be accelerated out of freshly synthesized matter from supernovae. This work, in turn, led us to propose a new origin of Galactic cosmic rays from the refractory grains in supernova enriched core of superbubbles, which is now the subject of our on-going research under a new grant from the Astrophysics Theory Program.

Lingenfelter, Richard E.↗
NASA NTRS1975

Lunar Science Conference, 6th, Houston, Tex., March 17-21, 1975, Proceedings. Volume 2 - Chemical and isotopic studies

The chemical compositions of lunar rocks and soils are examined, taking into account sulfur abundances and distributions in mare basalts and their source magmas, lithophile trace and major elements in Apollo 16 and 17 lunar samples, the role of vaporization processes in lunar rock formation, chemical studies of the lunar regolith with emphasis on zirconium and hafnium, a model for the lunar anorthositic gabbro, and trace-element chemistry and reducing capacity of size fractions from the Apollo 16 regolith. Other topics considered are related to lunar chronology, volatile meteoritic elements, isotopic studies, light element geochemistry, and agglutinates and regolith processes. Attention is given to meteoritic material in four terrestrial meteorite craters, the state of meteoritic material on the moon, volatile elements in Allende inclusions, oxygen isotope fractionation in Apollo 17 rocks, cosmogenic isotope production in Apollo deep-core samples, and the effects of exposure conditions on cosmic-ray records in lunar rocks.

Merrill, R. B.↗
NASA NTRS1979

The elemental and isotopic abundances of H, C, N, O in comets

The elemental abundances of light elements in comets is discussed by considering gas and dust separately. It is noted that the icy conglomerate model of the nucleus (Whipple, 1957) has been confirmed, and that the dust-to-gas mass ratio has been estimated within a factor of two for two recent comets. It is found that the total amount of oxygen available is also nominally in solar abundance; this implies that the oxygen of the solar nebula has probably been quantitatively bound in compounds that have been completely condensed and accreted in cometary nuclei. In addition, the amount of hydrogen is clearly depleted by a factor of 2,000, suggesting that the only hydrogen present is that linked in molecular compounds of H, C, N and O.

Delsemme, A. H.↗
NASA NTRS2011

Calibration of the MSL/ChemCam/LIBS Remote Sensing Composition Instrument

The ChemCam instrument suite on board the 2011 Mars Science Laboratory (MSL) Rover, Curiosity, will provide remote-sensing composition information for rock and soil samples within seven meters of the rover using a laser-induced breakdown spectroscopy (LIBS) system, and will provide context imaging with a resolution of 0.10 mradians using the remote micro-imager (RMI) camera. The high resolution is needed to image the small analysis footprint of the LIBS system, at 0.2-0.6 mm diameter. This fine scale analytical capability will enable remote probing of stratigraphic layers or other small features the size of "blueberries" or smaller. ChemCam is intended for rapid survey analyses within 7 m of the rover, with each measurement taking less than 6 minutes. Repeated laser pulses remove dust coatings and provide depth profiles through weathering layers, allowing detailed investigation of rock varnish features as well as analysis of the underlying pristine rock composition. The LIBS technique uses brief laser pulses greater than 10 MW/square mm to ablate and electrically excite material from the sample of interest. The plasma emits photons with wavelengths characteristic of the elements present in the material, permitting detection and quantification of nearly all elements, including the light elements H, Li, Be, B, C, N, O. ChemCam LIBS projects 14 mJ of 1067 nm photons on target and covers a spectral range of 240-850 nm with resolutions between 0.15 and 0.60 nm FWHM. The Nd:KGW laser is passively cooled and is tuned to provide maximum power output from -10 to 0 C, though it can operate at 20% degraded energy output at room temperature. Preliminary calibrations were carried out on the flight model (FM) in 2008. However, the detectors were replaced in 2009, and final calibrations occurred in April-June, 2010. This presentation describes the LIBS calibration and characterization procedures and results, and details plans for final analyses during rover system thermal testing, planned for early March.

Wiens, R. C.↗
NASA NTRS2023

The Nature of Insoluble Organic Matter in Sutter’s Mill and Murchison Carbonaceous Chondrites: Testing the Effect of X-ray Computed Tomography (XCT) and Exploring Parent Body Organic Molecular Evolution

This study analyzed samples of the Murchison and Sutter’s Mill carbonaceous chondrite meteorites in support of the future analysis of samples returned from the asteroid (10155) Bennu by the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer) mission. Focusing specifically on the insoluble organic matter (IOM), this study establishes that a total of 1.3 g of bulk sample from a single chondritic meteorite is sufficient to obtain a wide range of cosmochemical information, including light element analysis (H, C, and N), isotopic analysis (D/H, 13 C/ 12 C, and 15 N/ 14 N), and X-ray fluorescence spectroscopy for major elemental abundances. IOM isolated from the bulk meteorite samples was analyzed by light element and isotopic analysis as described above, 1 H and 13 C solid-state nuclear magnetic resonance spectroscopy, Raman spectroscopy, and complete noble gas analyses (abundances and isotopes). The samples studied included a pair from Murchison (CM2), one of which had been irradiated with high-energy X-rays in the course of computed tomographic imaging. No differences between the irradiated and non-irradiated Murchison samples were observed in the many different chemical and spectroscopic analyses, indicating that any X-ray–derived sample damage is below levels of detection. Elemental, isotopic, and molecular spectroscopic data derived from IOM isolated from the Sutter’s Mill sample reveals evidence that this meteorite falls into the class of heated CM chondrites.

planetary science↗
NASA NTRS1993

An x ray scatter approach for non-destructive chemical analysis of low atomic numbered elements

A non-destructive x-ray scatter (XRS) approach has been developed, along with a rapid atomic scatter algorithm for the detection and analysis of low atomic-numbered elements in solids, powders, and liquids. The present method of energy dispersive x-ray fluorescence spectroscopy (EDXRF) makes the analysis of light elements (i.e., less than sodium; less than 11) extremely difficult. Detection and measurement become progressively worse as atomic numbers become smaller, due to a competing process called 'Auger Emission', which reduces fluorescent intensity, coupled with the high mass absorption coefficients exhibited by low energy x-rays, the detection and determination of low atomic-numbered elements by x-ray spectrometry is limited. However, an indirect approach based on the intensity ratio of Compton and Rayleigh scattered has been used to define light element components in alloys, plastics and other materials. This XRS technique provides qualitative and quantitative information about the overall constituents of a variety of samples.

Ross, H. Richard↗
NASA NTRS2017

Effect of Silicon on Activity Coefficients of Platinum in Liquid Fe-Si, With Application to Core Formation

Earth's core contains approximately 10% of a light element that is likely a combination of S, C, Si, and O, with Si possibly being the most abundant light element. Si dissolved into Fe liquids can have a large effect on the magnitude of the activity coefficient of siderophile elements (SE) in Fe liquids, and thus the partitioning behavior of those elements between core and mantle. The effect of Si can be small such as for Ni and Co, or large such as for Mo, Ge, Sb, As. The effect of Si on many siderophile elements is unknown yet could be an important, and as yet unquantified, influence on the core-mantle partitioning of SE. Here we report new experiments designed to quantify the effect of Si on the partitioning of Pt (with Re and Ru in progress or planned) between metal and silicate melt. The results will be applied to Earth, for which we have excellent constraints on the mantle Pt concentrations.

Righter, K.↗
NASA NTRS1986

Composition of comet Halley dust particles from Giotto observations

Mass spectra of cometary dust particles measured by the PIA dust particle analyzer aboard the Giotto spacecraft show some unexpected and striking features. First, small particles below 10 to the -14th g are much more abundant than anticipated by models. Second, most of the particles are rich in light elements such as H, C, N, and O, suggesting the validity of models that describe the cometary dust as including organic material. Third, the light elements specifically seem to have a low ratio of mass to volume. Three examples of original mass spectra showing typical compositions are given; these have been measured, and are compared with a computer-simulated mass spectrum.

Kissel, J.↗
NASA NTRS1988

Stable isotopic studies of H,C,N,O and S in samples of Martian origin

The present day geochemical cycles of volatile elements through the various reservoirs on Earth are largely understood within the context of the planet's standing as a geologically and biologically evolved body. In terrestrial studies stable isotope measurements of light elements (H, C, N, O and S) can be utilized to obtain insight into the conditions prevailing during formation of rocks of various types. Perhaps the most important problem which could be addressed by light element studies of the sorts of specimen likely to be available from remote automatic sampling, would be the role of volatiles during evolution. Of fundamental importance here is the question of whether Mars was volatile rich or volatile poor. The only way to fully comprehend the effects of volatile cycling through the mantle crust and regolith atmosphere polar cap system of Mars, is by analyses of appropriate returned samples. In order to interpret the record of geological activity in Martian samples it will be necessary to understand how the past, or present, surface environment may have acted to disturb the primary characteristics of the rocks.

Wright, I. P.↗
NASA NTRS1992

X-Ray Microanalysis and Electron Energy Loss Spectrometry in the Analytical Electron Microscope: Review and Future Directions

This paper reviews and discusses future directions in analytical electron microscopy for microchemical analysis using X-ray and Electron Energy Loss Spectroscopy (EELS). The technique of X-ray microanalysis, using the ratio method and k(sub AB) factors, is outlined. The X-ray absorption correction is the major barrier to the objective of obtaining I% accuracy and precision in analysis. Spatial resolution and Minimum Detectability Limits (MDL) are considered with present limitations of spatial resolution in the 2 to 3 microns range and of MDL in the 0.1 to 0.2 wt. % range when a Field Emission Gun (FEG) system is used. Future directions of X-ray analysis include improvement in X-ray spatial resolution to the I to 2 microns range and MDL as low as 0.01 wt. %. With these improvements the detection of single atoms in the analysis volume will be possible. Other future improvements include the use of clean room techniques for thin specimen preparation, quantification available at the I% accuracy and precision level with light element analysis quantification available at better than the 10% accuracy and precision level, the incorporation of a compact wavelength dispersive spectrometer to improve X-ray spectral resolution, light element analysis and MDL, and instrument improvements including source stability, on-line probe current measurements, stage stability, and computerized stage control. The paper reviews the EELS technique, recognizing that it has been slow to develop and still remains firmly in research laboratories rather than in applications laboratories. Consideration of microanalysis with core-loss edges is given along with a discussion of the limitations such as specimen thickness. Spatial resolution and MDL are considered, recognizing that single atom detection is already possible. Plasmon loss analysis is discussed as well as fine structure analysis. New techniques for energy-loss imaging are also summarized. Future directions in the EELS technique will be the development of new spectrometers and improvements in thin specimen preparation. The microanalysis technique needs to be simplified and software developed so that the EELS technique approaches the relative simplicity of the X-ray technique. Finally, one can expect major improvements in EELS imaging as data storage and processing improvements occur.

Goldstein, J. I.↗
NASA NTRS2003

The Parameterization of Solid Metal-Liquid Metal Partitioning of Siderophile Elements

The composition of a metallic liquid can significantly affect the partitioning behavior of elements. For example, some experimental solid metal-liquid metal partition coefficients have been shown to increase by three orders of magnitude with increasing S-content of the metallic liquid. Along with S, the presence of other light elements, such as P and C, has also been demonstrated to affect trace element partitioning behavior. Understanding the effects of metallic composition on partitioning behavior is important for modeling the crystallization of magmatic iron meteorites and the chemical effects of planetary differentiation. It is thus useful to have a mathematical expression that parameterizes the partition coefficient as a function of the composition of the metal. Here we present a revised parameterization method, which builds on the theory of the current parameterization of Jones and Malvin and which better handles partitioning in multi-light-element systems.

Chabot, N. L.↗