Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multifunctional Effect of Fe Substitution in Na Layered Cathode Materials for Enhanced Storage Stability

In this study, developing stable cathode materials that are resistant to storage degradation is essential for practical development and industrial processing of Na-ion batteries, as many sodium layered oxide materials are susceptible to hygroscopicity and instability when exposed to ambient air. Among the various layered compounds, Fe-substituted O 3 -type Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 materials have emerged as a promising option for high-performance and low-cost cathodes. While previous reports have noted the decent air-storage stability of these materials, the role and origin of Fe substitution in improving storage stability remain unclear. In this study, we investigate the air resistant effect of Fe substitution in O 3 -Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 cathode materials by performing systematic surface and structural characterizations. We find that the improved storage stability can be attributed to the multifunctional effect of Fe substitution, which forms a surface protective layer containing an Fe-incorporated spinel phase and decreases the thermodynamical driving force for bulk chemical sodium extraction. With these mechanisms, the Fe-containing cathodes can suppress the cascades of cathode degradation processes and better retain the electrochemical performance after air storage.

25 ENERGY STORAGE↗
DOE OSTI2023

System and method for roll-to-roll film tensioning for reduced separation force during bottom-up stereolithography

The present disclosure relates to a tensioning system for use in a stereolithography manufacturing application. The system may have a build plate for supporting a three dimensional part being formed using a photo responsive resin, a base plate and a release element extending over the base plate. The release element is configured to receive a quantity of photo responsive resin for forming a new material layer of the three dimensional part. A pair of tensioning components are secured to opposite ends of the release element, and apply a controlled tension force to the release element during peeling of the release element to reduce a separation force required to separate the release element from the new material layer after the new material layer is cured.

Duoss, Eric B.↗
DOE OSTI2021

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗
DOE OSTI2021

Alkali metal-sulfur secondary battery containing cathode material particulates

Provided is a rechargeable alkali metal-sulfur cell comprising an anode active material layer, an electrolyte, and a cathode active material layer comprising multiple particulates, wherein at least one of the particulates comprises one or a plurality of sulfur-containing material particles being embraced or encapsulated by a thin layer of a conductive sulfonated elastomer composite having from 0.01% to 50% by weight of a conductive reinforcement material dispersed in a sulfonated elastomeric matrix material, wherein the conductive reinforcement material is selected from graphene sheets, carbon nanotubes, carbon nanofibers, metal nanowires, conductive polymer fibers, or a combination thereof and the composite has a recoverable tensile strain from 2% to 500%, a lithium ion conductivity from 10−7 S/cm to 5×10−2 S/cm, and a thickness from 0.5 nm to 10 μm. This battery exhibits an excellent combination of high sulfur content, high sulfur utilization efficiency, high energy density, and long cycle life.

Zhamu, Aruna↗
DOE OSTI2023

Non-corroding stripping lifting inserts for precast insulated panels

A stripping lifting insert is provided for precast insulated panels having an insulating material layer between opposing wythes, the insulating material layer, wythes, and precast insulated panel having respective widths. The stripping lifting insert includes an elongated connecting shaft having a shaft axis. First and second spaced apart wythe engagement members are connected to the connecting shaft in spaced apart relation to each other. Each wythe engagement member includes a hub and a plurality of three or more protrusions connected to and emanating from hub. Each of the protrusions extending radially outward from the shaft axis. The wythe engagement members have a height less than the width of the wythes, whereby each wythe engagement member can be completely embedded in a respective wythe of the precast insulated panel. A precast insulated panel and a method of making a precast insulated panel are also disclosed.

Hun, Diana↗
DOE OSTI2021

Water treatment based on atomically engineered materials: Atomic layer deposition and beyond

Global water stress and challenges for producing sufficient supplies of fit-for-purpose water are amplifying. Atomically engineered interfaces are emerging as a powerful tool in the fabrication of advanced water treatment materials. Atomic layer deposition (ALD) and recently developed related methods, such as sequential infiltration synthesis (SIS), offer a tremendously diverse library of chemistries for interface functionalization. Thickness, stoichiometry, and physicochemical properties can be manipulated with precision. We review their fundamental physical chemistry and processing factors. ALD/SIS engineering strategies, including direct deposition, growth with intermediate layers, and secondary treatment are presented with realization of efficient water treatment. We lay out a pathway to establishing an ALD/SIS-based universal functionalization platform for water treatment, including sensitization strategies, in situ regulation, secondary reactions, and simulation/machine learning. Furthermore, we also provide a perspective on ALD/SIS-based interface engineering via synergy with other widely used interface engineering techniques to develop facile, versatile, and energy-efficient strategies for tackling increasingly complex water challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides (Final Report)

The overarching goal of this research program, as originally delineated in the proposal “Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides” was to develop a predictive, chemistry-driven understanding of the impact of the phonon behavior on thermal properties of bulk layered materials. At finite temperatures, atomic vibrations (phonons) strongly impact the thermodynamics, thermal and electrical transport, and phase-switching properties of functional materials. In particular, soft phonon modes and strongly anharmonic potentials can have spectacular consequences, including structural phase transitions (for example in ferroelectrics and phase-change memory materials), metal-insulator transitions, and extreme thermal resistance preventing heat propagation. Bulk materials with highly-anisotropic bonding may provide unique strategies to induce soft-phonon modes and lattice instabilities. Recently, increasingly detailed investigations of the lattice dynamics in layered materials have been made possible by the advent of first-principles phonon calculations and advanced characterization techniques based on neutron and X-ray scattering. However, due to the lack of studies in which composition and bonding character are systematically varied, there are still fundamental questions regarding the impacts of anisotropic bonding and anharmonicity on lattice stability and thermal transport. One of the major goals of this research program is therefore to address this gap by coherently tuning bonding anisotropy and anharmonicity across families of related compounds. Such approaches have revealed new strategies for exploiting structural anisotropy in quasi-1D and 2D bulk materials to obtain tailored functional properties. This project systematically explored the lattice dynamics, phase stability, and transport properties in bulk layered materials by using both composition and applied pressure to tune the degree of bonding anisotropy and anharmonicity. To accomplish this work, we combined i) single-crystal growth of key material systems with tunable anisotropy, ii) in-situ high-temperature/high-pressure characterization of structure and phonons to probe bonding anisotropy and anharmonicity, including state-of-the-art inelastic X-ray scattering (IXS) and inelastic neutron scattering (INS), and iii) first-principles simulations leveraging large-scale computing to identify the fundamental origins of the observed effects, by relating atomic structure and dynamics to electronic orbital interactions. Finally, we modeled and verified the impact of the phonon behavior on thermal transport to identify new strategies for a-priori design of thermal conductivity. Our integrated collaborative approach helped to systematically unravel the effects of anisotropy and bonding anharmonicity on phonon transport, thermodynamics, and thermal properties of complex anisotropic materials.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides. Final Report

The overarching goal of this research program, as originally delineated in the proposal “Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides” was to develop a predictive, chemistry-driven understanding of the impact of the phonon behavior on thermal properties of bulk layered materials. At finite temperatures, atomic vibrations (phonons) strongly impact the thermodynamics, thermal and electrical transport, and phase-switching properties of functional materials. In particular, soft phonon modes and strongly anharmonic potentials can have spectacular consequences, including structural phase transitions (for example in ferroelectrics and phase-change memory materials), metal-insulator transitions, and extreme thermal resistance preventing heat propagation. Bulk materials with highly-anisotropic bonding may provide unique strategies to induce soft-phonon modes and lattice instabilities. Recently, increasingly detailed investigations of the lattice dynamics in layered materials have been made possible by the advent of first-principles phonon calculations and advanced characterization techniques based on neutron and X-ray scattering. However, due to the lack of studies in which composition and bonding character are systematically varied, there are still fundamental questions regarding the impacts of anisotropic bonding and anharmonicity on lattice stability and thermal transport. One of the major goals of this research program is therefore to address this gap by coherently tuning bonding anisotropy and anharmonicity across families of related compounds. Such approaches have revealed new strategies for exploiting structural anisotropy in quasi-1D and 2D bulk materials to obtain tailored functional properties. This project systematically explored the lattice dynamics, phase stability, and transport properties in bulk layered materials by using both composition and applied pressure to tune the degree of bonding anisotropy and anharmonicity. To accomplish this work, we combined i) single-crystal growth of key material systems with tunable anisotropy, ii) in-situ high-temperature/high-pressure characterization of structure and phonons to probe bonding anisotropy and anharmonicity, including state-of-the-art inelastic X-ray scattering (IXS) and inelastic neutron scattering (INS), and iii) first-principles simulations leveraging large-scale computing to identify the fundamental origins of the observed effects, by relating atomic structure and dynamics to electronic orbital interactions. Finally, we modeled and verified the impact of the phonon behavior on thermal transport to identify new strategies for a-priori design of thermal conductivity. Our integrated collaborative approach helped to systematically unravel the effects of anisotropy and bonding anharmonicity on phonon transport, thermodynamics, and thermal properties of complex anisotropic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical preintercalation of magnesium ions into ⍺-MoO 3 structure for improved electrochemical stability in Li-ion cells

Chemical preintercalation of layered materials, used as electrodes in intercalation-based energy storage devices, represents a promising strategy to enhance electrochemical stability and extend cycle life. However, standardized synthesis approaches for the chemical preintercalation of diverse ions into various layered materials are lacking, necessitating the development of specific synthesis routes for each ion and layered phase combination. In this study, we present the first successful demonstration of Mg 2+ ion chemical preintercalation into the interlayer region of α-MoO 3 , revealing its stabilizing effect during cycling in non-aqueous Li-ion cells. Using ethanol during hydrothermal treatment facilitated molybdenum reduction, which was critical for Mg 2+ ion preintercalation. Interestingly, we found that Mg preintercalation was accompanied by the incorporation of water. Mg-preintercalated α-MoO 3 exhibited enhanced charge storage capacity, electrochemical stability, and power capability compared to pristine α-MoO 3 electrodes. This improved performance is attributed to the structural stabilization provided by Mg 2+ pillars, which prevent undesirable phase transformations during repeated Li intercalation/deintercalation, and increased Li + ion diffusion due to the shielding of electrostatic interactions between electrochemically cycled ions and the α-MoO 3 lattice, enabled by structural water. In conclusion, our study offers new insights into developing chemical preintercalation synthesis approaches that can be broadly applied to a wide range of pillaring ions and layered material hosts.

25 ENERGY STORAGE↗
DOE OSTI2023

High-throughput manufacturing of epitaxial membranes from a single wafer by 2D materials-based layer transfer process

Layer transfer techniques have been extensively explored for semiconductor device fabrication as a path to reduce costs and to form heterogeneously integrated devices. These techniques entail isolating epitaxial layers from an expensive donor wafer to form freestanding membranes. However, current layer transfer processes are still low-throughput and too expensive to be commercially suitable. Here we report a high-throughput layer transfer technique that can produce multiple compound semiconductor membranes from a single wafer. We directly grow two-dimensional (2D) materials on III–N and III–V substrates using epitaxy tools, which enables a scheme comprised of multiple alternating layers of 2D materials and epilayers that can be formed by a single growth run. Each epilayer in the multistack structure is then harvested by layer-by-layer mechanical exfoliation, producing multiple freestanding membranes from a single wafer without involving time-consuming processes such as sacrificial layer etching or wafer polishing. Moreover, atomic-precision exfoliation at the 2D interface allows for the recycling of the wafers for subsequent membrane production, with the potential for greatly reducing the manufacturing cost.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Vertical full-colour micro-LEDs via 2D materials-based layer transfer

Micro-LEDs (µLEDs) have been explored for augmented and virtual reality display applications that require extremely high pixels per inch and luminance. However, conventional manufacturing processes based on the lateral assembly of red, green and blue (RGB) µLEDs have limitations in enhancing pixel density. Recent demonstrations of vertical µLED displays have attempted to address this issue by stacking freestanding RGB LED membranes and fabricating top-down, but minimization of the lateral dimensions of stacked µLEDs has been difficult. Here we report full-colour, vertically stacked µLEDs that achieve, to our knowledge, the highest array density (5,100 pixels per inch) and the smallest size (4 µm) reported to date. This is enabled by a two-dimensional materials-based layer transfer technique that allows the growth of RGB LEDs of near-submicron thickness on two-dimensional material-coated substrates via remote or van der Waals epitaxy, mechanical release and stacking of LEDs, followed by top-down fabrication. The smallest-ever stack height of around 9 µm is the key enabler for record high µLED array density. We also demonstrate vertical integration of blue µLEDs with silicon membrane transistors for active matrix operation. Furthermore, these results establish routes to creating full-colour µLED displays for augmented and virtual reality, while also offering a generalizable platform for broader classes of three-dimensional integrated devices.

42 ENGINEERING↗
DOE OSTI2023

Order-disorder phase transition driven by interlayer sliding in lead iodides

A variety of phase transitions have been found in two-dimensional layered materials, but some of their atomic-scale mechanisms are hard to clearly understand. Here, we report the discovery of a phase transition whose mechanism is identified as interlayer sliding in lead iodides, a layered material widely used to synthesize lead halide perovskites. The low-temperature crystal structure of lead iodides is found not 2H polytype as known before, but non-centrosymmetric 4H polytype. This undergoes the order-disorder phase transition characterized by the abrupt spectral broadening of valence bands, taken by angle-resolved photoemission, at the critical temperature of 120 K. It is accompanied by drastic changes in simultaneously taken photocurrent and photoluminescence. The transmission electron microscopy is used to reveal that lead iodide layers stacked in the form of 4H polytype at low temperatures irregularly slide over each other above 120 K, which can be explained by the low energy barrier of only 10.6 meV/atom estimated by first principles calculations. Our findings suggest that interlayer sliding is a key mechanism of the phase transitions in layered materials, which can significantly affect optoelectronic and optical characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

2D material-based layer transfer: Challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

Kim, Jeehwan↗
DOE OSTI2022

Two-dimensional material based layer transfer: challenges and opportunities

For future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, needs for flexibility and stackability of electronic products have substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to the thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically complaint and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. For the past few decades, many different strategies to mitigate such performance-mechanical compliance dilemma by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. In today’s talk, I will discuss about various strategies to realize such a dream electronic system and how these strategies unlock new ways of manufacturing advanced electronic systems. One of the most promising approaches is to fabricate freestanding ultrathin membranes from existing functional material wafers by peeling the active layers from the top. I will overview all freestanding membrane methods and especially dive deeply into 2D materials-based layer transfer (2DLT) technique that has been recently emerging as one of the very promising options. In the 2DLT process, one can produce single-crystalline freestanding membranes from 3D materials by performing remote epitaxy or van der Waals epitaxy on 2D materials followed by peeling active single-crystalline films from the 2D materials. I will discuss about the challenges and opportunities of this technology. In addition, I will present unprecedented artificial heterostructures that can be enabled by stacking those freestanding 3D material membranes.

KIM, JEEHWAN↗
DOE OSTI2024

A high-throughput and data-driven computational framework for novel quantum materials

Two-dimensional layered materials, such as transition metal dichalcogenides (TMDs), possess an intrinsic van der Waals gap at the layer interface, allowing for remarkable tunability of the optoelectronic features via external intercalation of foreign guests such as atoms, ions, or molecules. Herein, we introduce a high-throughput, data-driven computational framework for the design of novel quantum materials derived from intercalating planar conjugated organic molecules into bilayer transition metal dichalcogenides and dioxides. By combining first-principles methods, material informatics, and machine learning, we characterize the energetic and mechanical stability of this new class of materials and identify the fifty (50) most stable hybrid materials from a vast configurational space comprising ∼105 materials, employing intercalation energy as the screening criterion.

Kastuar, Srihari M. (ORCID:0000000279001561)↗
NASA NTRS2002

Finite Element A Posteriori Error Estimation for Heat Conduction

This research investigates residual-based a posteriori error estimates for finite element approximations of heat conduction in single-layer and multi-layered materials. The finite element approximation, based upon hierarchical modelling combined with p-version finite elements, is described with specific application to a two-dimensional, steady state, heat-conduction problem. Element error indicators are determined by solving an element equation for the error with the element residual as a source, and a global error estimate in the energy norm is computed by collecting the element contributions. Numerical results of the performance of the error estimate are presented by comparisons to the actual error. Two methods are discussed and compared for approximating the element boundary flux. The equilibrated flux method provides more accurate results for estimating the error than the average flux method. The error estimation is applied to multi-layered materials with a modification to the equilibrated flux method to approximate the discontinuous flux along a boundary at the material interfaces. A directional error indicator is developed which distinguishes between the hierarchical modeling error and the finite element error. Numerical results are presented for single-layered materials which show that the directional indicators accurately determine which contribution to the total error dominates.

Lang, Christapher G.↗
NASA NTRS2003

Eroding Potentiometers

Eroding potentiometers have been devised for measuring the time-dependent positions of char fronts advancing through layers of insulating material subject to intense heating from one side. In the original application, the material layers of interest are thermal insulators in rocket motors and the heat comes from firing of the motors, but the principle of operation is equally applicable to other insulating materials subject to intense heating (e.g., ablative fire-retardant materials). Measuring the thickness decrement of propellant (in hybrid motors in particular) is another possible application of this transducer. Telemetry informs mission control of the propellant left after each burn. An eroding potentiometer could be characterized, more precisely, as an eroding two-wire resistor. It includes a twisted pair of thin, insulated wires oriented along the thickness of, and embedded in, the layer of thermal-insulation material to be tested (see figure). The electrical insulation material on the wires should be one for which the charring temperature is about the same as (or perhaps slightly less than) that of the thermal- insulation material to be tested. In the original rocket-motor application, the wires have a diameter of 0.003 in. (.0.08 mm), are made of manganin, and are coated with polyimide for electrical insulation. Outside the thermal insulation on the cold side, the wire leads are connected to a Wheatstone bridge circuit for measurement of electrical resistance change.

Eggett, Mark↗