Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionic liquid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Cyanohydridoborate Anions: Synthesis, Salts, and Low‐Viscosity Ionic Liquids

Abstract High‐yield syntheses up to molar scales for salts of [BH(CN) 3 ] − ( 2 ) and [BH 2 (CN) 2 ] − ( 3 ) starting from commercially available Na[BH 4 ] (Na 5 ), Na[BH 3 (CN)] (Na 4 ), BCl 3 , (CH 3 ) 3 SiCN, and KCN were developed. Direct conversion of Na 5 into K 2 was accomplished with (CH 3 ) 3 SiCN and (CH 3 ) 3 SiCl as a catalyst in an autoclave. Alternatively, Na 5 is converted into Na[BH{OC(O) R } 3 ] ( R =alkyl) that is more reactive towards (CH 3 ) 3 SiCN and thus provides an easy access to salts of 2 . Some reaction intermediates were identified, for example, Na[BH(CN){OC(O)Et} 2 ] (Na 7 b ) and Na[BH(CN) 2 {OC(O)Et}] (Na 8 b ). A third entry to 2 and 3 uses ether adducts of BHCl 2 or BH 2 Cl such as the commercial 1,4‐dioxane adducts that react with KCN and (CH 3 ) 3 SiCN. Alkali metal salts of 2 and 3 are convenient starting materials for organic salts, especially for low viscosity ionic liquids (ILs). [EMIm] 3 has the lowest viscosity and highest conductivity with 10.2 mPa s and 32.6 mS cm −1 at 20 °C known for non‐protic ILs. The ILs are thermally, chemically, and electrochemically robust. These properties are crucial for applications in electrochemical devices, for example, dye‐sensitized solar cells (Grätzel cells).

Bischoff, Lisa A.↗
DOE OSTI2019

Polymer-in-"quasi-ionic liquid" electrolytes for high-voltage lithium metal batteries

Due to the limited oxidation stability (< 4 V) of ether oxygen, PEO-based polymer electrolytes are not compatible with high-voltage (> 4 V) cathodes, restricting the energy density of lithium (Li) metal batteries. Here, we design a new type of polymer in quasi-ionic liquid electrolyte (PQILE) that reduces the lone electron pairs of ether oxygens from PEO and ether solvent, induces the formation of stable interfacial layers on both surfaces of LiNi1/3Mn1/3Co1/3O2 cathode and Li metal anode, resulting in a capacity retention of 88.4%, 86.7% and 79.2% after 300 cycles with the charge cutoff voltage of 4.2, 4.3 and 4.4 V, respectively. It’s promising to use quasi-ionic liquids to design new polymer electrolytes for high-voltage and high-specific-energy Li metal batteries.

Wu, Haiping↗
DOE OSTI2014

Intra- and intermolecular effects on the Compton profile of the ionic liquid 1,3-dimethylimidazolium chloride

We present a comprehensive simulation study on the solid-liquid phase transition of the ionic liquid 1,3-dimethylimidazolium chloride in terms of the changes in the atomic structure and their effect on the Compton profile. The structures were obtained by using ab initio molecular dynamics simulations. Chosen radial distribution functions of the liquid structure are presented and found generally to be in good agreement with previous ab initio molecular dynamics and neutron scattering studies. The main contributions to the predicted difference Compton profile are found to arise from intermolecular changes in the phase transition. This prediction can be used for interpreting future experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

A Rechargeable Al/S Battery with an Ionic‐Liquid Electrolyte

Abstract Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite‐free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg −1 ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlS x . Herein, we demonstrate the first reversible Al/S battery in ionic‐liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid‐state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid‐state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.

Gao, Tao↗
DOE OSTI2018

Ionic Liquid Platform for Spinning Composite Chitin–Poly(lactic acid) Fibers

In the design of stronger chitin fibers reinforced with poly(lactic acid) (PLA), during this work, an ionic-liquid-based (IL-based) approach was developed in which both polymers were codissolved in an 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]) and wet-jet spun into composite fibers. Chitin, directly extracted from shrimp shell, had a solubility in the IL of 2.75 wt %, while PLA of MW 700 000 g/mol had a solubility of 49 wt %. Keeping the IL saturated in chitin, homogeneous solutions of chitin and PLA could be obtained up to 27 wt % (relative to the IL) PLA. Spinning dopes were prepared by maintaining the chitin concentration relative to the IL at 1.75 wt % and adding PLA in chitin to PLA weight ratios of 1:0.1 through 1:1 (PLA concentrations of 0.175–1.75 wt % relative to the IL). Homogeneous chitin/PLA fibers could be spun when the chitin to PLA ratio was between 1:0.1 and 1:0.3. The tensile strength and plasticity of the fibers depended on the chitin to PLA ratio with the highest plasticity (8.8% vs 3.0% for pure chitin fibers), strength (112 vs 71 MPa), and stiffness (5.9 vs 4.2 GPa) observed for fibers with a chitin to PLA ratio of 1:0.3. Studies of the fracturing surface of the fibers indicated that fracturing occurred through an initial disruption of the interactions between polymer chains, followed by complete fiber breakage. The work not only demonstrates that homogeneous composite fibers can be spun using a biopolymer and PLA additive, but also suggests a versatile platform for preparation of multiple biopolymer–PLA materials using solution processing methods.

1-Ethyl-3-methylimidazolium acetate↗
DOE OSTI2016

Odd–Even Structural Sensitivity on Dynamics in Network-Forming Ionic Liquids

As a compelling case of sensitive structure–property relationship, an odd–even effect refers to the alternating trend of physical or chemical properties on odd/even number of repeating structural units. In crystalline or semicrystalline materials, such odd–even effects emerge as manifestations of differences in the periodic packing patterns of molecules. Therefore, due to the lack of long-range order, such an odd–even phenomenon is not expected for dynamic properties in amorphous state. Herein, we report the discovery of a remarkable odd–even effect of dynamical properties in the liquid phase. In a class of glass-forming diammonium citrate ionic liquids, using incoherent quasi-elastic neutron scattering measurements, we measured the dynamical properties including diffusion coefficient and rotational relaxation time. These directly measured molecular dynamics showed pronounced alternating trends with increased number of methylene (-CH2-) groups in the backbone. Meanwhile, the structure factor S(Q) showed no long-range periodic packing of molecules, while the pair distribution function G(r) revealed subtle differences in the local molecular morphology. The observed dynamical odd–even phenomenon in liquids showed that profound dynamical changes originate from subtle local structural differences.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Pulping of Crustacean Waste Using Ionic Liquids: To Extract or Not To Extract

We present that ionic liquids (ILs), such as hydroxyammonium acetate ([NH 3 OH][OAc]), can reactively demineralize and remove proteins from shrimp shells in an efficient one-pot pulping process, thus allowing the isolation of native chitin with >80% purity and a high degree of acetylation and crystallinity. Compared to a previously reported IL extraction using 1-ethyl-3 methylimidazolium acetate, [C 2 mim][OAc], these less expensive ILs can achieve comparable chitin yields and purity, at up to ten times the biomass loading, although potentially result in lower molecular weight (MW) chitin. Because the IL is not recovered or recycled, the cost can additionally be further reduced by the sequential addition of hydroxylamine and acetic acid (or vice versa) to conduct the pulping process in situ. Though each methodology results in a comparable yields and purity of chitin material, the varying production costs and process safety issues are still unknown. Finally, this work presents a step toward narrowing the choices for chitin isolation technologies that can lead to an economically and environmentally sustainable process replacing the current hazardous, energy consuming, and environmentally unsafe process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Production of Gas-Phase Uranium Fluoroanions Via Solubilization of Uranium Oxides in the [1-Ethyl-3-Methylimidazolium]{sup +}[F(HF){sub 2.3}]{sup −} Ionic Liquid

A new methodology for gas-phase uranium ion formation is described in which UO{sub 2} is dissolved in neat N-ethyl,N′-methylimidazolium fluorohydrogenate ionic liquid [EMIm{sup +}][F(HF){sub 2.3}{sup −}], yielding a blue-green solution. The solution was diluted with acetonitrile and then analyzed by electrospray ionization mass spectrometry. UF{sub 6}{sup −} (a U(V) species) was observed at m/z = 352, and other than cluster ions derived from the ionic liquid, nothing else was observed. When the sample was analyzed using infusion desorption chemical ionization, UF{sub 6}{sup −} was the base peak, and it was accompanied by a less intense UF{sub 5}{sup −} that most likely was formed by elimination of a fluorine radical from UF{sub 6}{sup −}. Formation of UF{sub 6}{sup −} required dissolution of UO{sub 2} followed by or concurrent with oxidation of uranium from the + 4 to the + 5 state and finally formation of the fluorouranate. Dissolution of UO{sub 3} produced a bright yellow solution indicative of a U(VI) species; however, electrospray ionization did not produce abundant U-containing ions. The abundant UF{sub 6}{sup −} provides a vehicle for accurate measurement of uranium isotopic abundances free from interference from minor isotopes of other elements and a convenient ion synthesis route that is needed gas-phase structure and reactivity studies like infrared multiphoton dissociation and ion-molecule dissociation and condensation reactions. The reactive fluorohydrogenate ionic liquid may also enable conversion of uranium in oxidic matrices into uranium fluorides that slowly oxidize to uranyl fluoride under ambient conditions, liberating the metal for facile measurement of isotope ratios without extensive chemical separations. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Heat pumps utilizing ionic liquid desiccant

An ionic liquid desiccant system utilizes an ionic liquid desiccant to draw moisture from a working fluid, such as air that flow into an enclosure, such as a home. The desiccant may be mixed with the working fluid or a separator that allows moisture transport therethrough may be configured between the ionic liquid desiccant and the working fluid. The ionic liquid desiccant system may be part of an air conditioning system and may remove the moisture from air that is cooled by flowing over an evaporator or heat exchanger coupled with the evaporator. The ionic liquid desiccant may be pumped from a desiccant chamber to a regenerator chamber to remove absorbed moisture. A dual-purpose chamber may act as a desiccant chamber and as a regenerator chamber. A refrigeration system may have an electrochemical compressor and may utilize metal hydride heat exchangers.

Bahar, Bamdad↗
DOE OSTI2016

Boosting the Performance of Ionic-Liquid-Based Supercapacitors with Polar Additives

Recent years have witnessed growing interests in both the fundamentals and applications of electric double layer capacitors (EDLCs), also known as supercapacitors. A number of strategies have been explored to optimize the device performance in terms of both the energy and power densities. Because the properties of electric double layers (EDL) are sensitive to ion distributions in the close vicinity of the electrode surfaces, the supercapacitor performance is sensitive to both the electrode pore structure and the electrolyte composition. In this work, we study the effects of polar additives on EDLC capacitance using the classical density functional theory within the framework of a coarse-grained model for the microscopic structure of the porous electrodes and room-temperature ionic liquids. The theoretical results indicate that a highly polar, low-molecular-weight additive is able to drastically increase the EDLC capacitance at low bulk concentration. Additionally, the additive is able to dampen the oscillatory dependence of the capacitance on the pore size, thereby boosting the performance of amorphous electrode materials. The theoretical predictions are directly testable with experiments and provide new insights into the additive effects on EDL properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Installation of a reactive site for covalent wiring onto an intrinsically conductive poly(ionic liquid)

Post-polymerization radical bromination of a nanostructured poly(ionic liquid) that selectively introduces a reactive bromo-group onto the polyalkylthiophene backbone is described. Raman and FTIR spectroscopy proves that the bromine is successfully introduced at the 3-methyl position of the thiophene and that the molecular structure of the polymer remains largely intact with only minimal chain scission detected. FT-IR and Vis-NIR spectroscopy indicates that incorporation of the bromine induces twisting (loss of co-planarity) of the polythiophene backbone. WAXS confirms retention of an ordered lamellar structure with minor lattice spacing contraction. Cyclic voltammetry confirms spectroscopic findings that the bromination reaction yields a stable p-doped polymer. The installed bromine is susceptible to nucleophilic displacement permitting the covalent attachment of other functional molecules, such as a dialkylphosphonate. Elemental analysis of such a transformation established that 100% functionalization can be achieved. These results collectively demonstrate that post-modification of a pconjugated polymer can be used to both tune electronic and photonic properties, as well as install a chemoselective attachment point for the covalent wiring of other molecules.

Brombosz, Scott M.↗
DOE OSTI2021

Characterization of a Sulfonated Poly(Ionic Liquid) Block Copolymer as an Ionomer for Proton Exchange Membrane Fuel Cells using Rotating Disk Electrode

Ionic liquid (IL) additives to both traditional and advanced oxygen reduction reaction (ORR) electrocatalysts have yielded remarkable improvements in catalyst performance and durability. However, incorporating ILs or IL-modified catalysts into the electrodes of a proton exchange membrane fuel cell (PEMFC) membrane electrode assembly (MEA) has proven to be challenging. Sulfonated poly(ionic liquid) block copolymers (S-PILBCP) present an opportunity to incorporate IL functionality directly into the ionomer, orthogonal to protonic conductivity. Here, we use a rotating disc electrode (RDE) to characterize the interface between a S-PILBCP and Pt catalyst in comparison to Nafion. Catalyst thin films prepared with S-PILBCP show an 80% improvement in the ORR activity over those containing Nafion. Thin films of S-PILBCP also show a significantly reduced degree of poisoning sulfonate adsorption on a Pt(111) surface in comparison to Nafion. Furthermore, these half-cell results provide useful insights that help to highlight the source of the impact of the S-PILBCP on PEMFC MEA performance.

25 ENERGY STORAGE↗
DOE OSTI2018

Understanding Lignin Fractionation and Characterization from Engineered Switchgrass Treated by an Aqueous Ionic Liquid

Aqueous ionic liquids (ILs) have received increasing interest because of their high efficacy in fractionating and pretreating lignocellulosic biomass while at the same time mitigating several challenges associated with IL pretreatment such as IL viscosity, gel formation during pretreatment, and the energy consumption and costs associated with IL recycling. This paper investigated the fate of lignin, its structural and compositional changes, and the impact of lignin modification on the deconstruction of cell wall compounds during aqueous IL (10% w/w cholinium lysinate) pretreatment of wild-type and engineered switchgrass. The 4CL genotype resulting from silencing of 4-coumarate:coenzyme A ligase gene (Pv4CL1) had a lower lignin content, relatively higher amount of hydroxycinnamates, and higher S/G ratio and appeared to be less recalcitrant to IL pretreatment likely due to the lower degree of lignin branching and more readily lignin solubilization. The results further demonstrated over 80% of lignin dissolution from switchgrass into the liquid fraction under mild conditions while the remaining solids were highly digestible by cellulases. The soluble lignin underwent partial depolymerization to a molecular weight around 500–1000 Da. 1 H– 13 C HSQC NMR results demonstrated that the variations in lignin compositions led to different modes of lignin dissolution and depolymerization during pretreatment of engineered switchgrass. Finally, these results provide insights into the impact of lignin manipulation on biomass fractionation and lignin depolymerization and lead to possible ways toward developing a more selective and efficient lignin valorization process based on aqueous IL pretreatment technology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Disentangling cation effects on ion mobility and structure in ionic liquid electrolytes

Ionic liquids (ILs) are low-temperature molten salts, where ion transport is primarily governed by ion–ion interactions. Yet, the impact of organic IL cations on critical electrolyte properties such as ion dissociation and overall transport behavior in lithium-salt-doped ILs remains poorly understood. Moreover, despite their critical role in designing IL-based electrolytes for energy storage applications, ion–ion interactions and ion-specific transport under an applied electrical potential are seldom quantified, largely due to the unique experimental and computational challenges involved. Herein, we compare transport properties obtained using 1 H, 7 Li, and 19 F pulsed-field gradient nuclear magnetic resonance (NMR) and electrophoretic NMR (eNMR) with those measured by electrochemical impedance spectroscopy. Non-equilibrium molecular dynamics (MD) simulations and eNMR confirm the presence of negatively charged [Li(TFSI) n ] (1−n) aggregates that migrate towards the positive electrode, resulting in negative lithium transference numbers. Equilibrium MD simulations reveal a vehicular Li ion transport mechanism facilitated by long-lived aggregates with Li + cations strongly bound to multiple TFSI − anions. Finally, we observe an inverse relationship between the apparent charge of the TFSI − anion in the neat IL, which is dictated by the IL cation, and Li + transport in the salt-doped systems. This highlights the opportunity to tune electrolyte performance by tailoring cation chemistry.

Li-ion batteries↗
DOE OSTI2017

Electric double layer capacitance for ionic liquids in nanoporous electrodes: Effects of pore size and ion composition

The energy density of an electric double layer (EDL) capacitor, a type of supercapacitor, depends on the ion distribution within the micropores of electrodes that are typically made of amorphous carbon. By using coarse-grained models and the classical density functional theory, we investigate the distributions of ionic species among different idealized nanopores in contact with an asymmetric ionic liquid mixture and the effects of the bulk electrolyte composition on capacitive energy storage. We find that a charged pore is always small-ion selective, provided all ions have the same valence and similar non-electrostatic interactions. While small ions enhance both the EDL capacitance and the accessibility of micropores, an ionic mixture containing ions of different sizes may yield a capacitance higher than those corresponding to pure ionic liquids. Furthermore, the increased capacitance may be attributed to more efficient ion packing near the charged surface. At certain conditions, the improvement is on a par with the anomalous capacitance rise for pure ionic liquids in electrodes with ultranarrow pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Highly Efficient Carbon Monoxide Capture by Carbanion-Functionalized Ionic Liquids through C-Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion-functionalized ionic liquids (ILs) by a C-site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol -1 ) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf 2 N] (2×10 -3 mol mol -1 ). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C-site in the carbanion and CO resulted in the superior CO absorption capacities. In addition, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion-functionalized ILs provides a new way of separating and converting CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗