Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inverse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Geothermal Fault Zone and Fluid Imaging through Joint Airborne ZTEM and Ground MT Data Inversion Analysis

This project has aimed to achieve detailed electrical resistivity resolution at geothermal reservoir scales by combining airborne natural electromagnetic (EM) field surveying (ZTEM) with ground magnetotelluric (MT) measurements to approximate an airborne MT geophysical method. MT alone is relatively expensive and may have permitting challenges in sensitive areas. Airborne ZTEM field data contains only the magnetic field, requires a background assumption, and has been limited to relatively high frequencies, thus suffering uniqueness problems. Based on proto-type 2D simulations, ZTEM ambiguities may be reduced through formal incorporation with possibly sparse ground MT soundings, which we pursued in full 3D for this project. The methodology was tested at the high-temperature Roosevelt Hot Springs geothermal system, Utah, which was considered advantageous given the near total exposure of crystalline reservoir rocks across the project area. ZTEM and ground MT survey data were acquired in 2017, subcontracted to outside parties with which we have worked in the past. These included 80 remote-referenced tensor MT soundings over the Mineral Mountains and adjacent Roosevelt Hot Spring producing geothermal system. These MT stations abut later coverage of a similar number of MT stations taken for the Utah FORGE project providing excellent total data aperture to re-solve structure beneath both project areas better than either set alone. The airborne ZTEM survey covered 704 line kilometers in E-W flight lines with a 250 m line spacing. Although this survey was timed during a maintenance-related shutdown of power production at the Roosevelt Hot Springs, other noise sources difficult to identify but including two high-voltage state-scale transmission lines compromised the ZTEM survey badly leading to unusable responses. Thus, with DOE management concurrence, the project proceeded to emphasize inversion and interpretation of the joint SubTER-FORGE MT data sets with regard to the Roosevelt Hot Springs reservoir recharge and to deep heat sources for both it and the Utah FORGE EGS project area. We also investigated the joint ZTEM-MT sampling concept with data sets from the Eleven Mile Canyon prospect area donated by the U.S. Navy (A. Sabin, PoC). Inversion of the SubTER-FORGE MT data using the HexMT 3D finite element algorithm reveals a large, low-resistivity anomaly extending sub-vertically through the depth range of the crust beneath the western Mineral Mountains. The steep conductive zone connects in the lower crust to a more tabular conductor characteristic of much of the Great Basin that generally is ascribed to current mafic magmatic underplating, hybridization and fluid release. The location of the resolved anomaly relative to the recent (0.5-0.8 Ma) eruptive centers of the Mineral Mountains implicates it as remnants of the magma body which fed these centers. This structure appears to be currently feeding heat and fluids upward into the Roosevelt Hot Springs hydrothermal system, as well as heat laterally to the FORGE project area. Separate and joint inversion models were carried out for the donated Eleven Mile Canyon MT-ZTEM data set to demonstrate concept. ZTEM only inversion showed two main alteration zones in the western portion of the project area known from geological mapping. Joint inversion including an E-W profile of MT soundings sharpened these features considerably. It also resolved in much greater detail the graben related normal faulting structure of the central project area which lies at depths exceeding the sensitivity of ZTEM alone. The sparse number of MT da-ta relative to the ZTEM required upweighting the former by a factor of several, but an exact procedure awaits future research. Our final impression is that sparse MT data can improve resolution of the subsurface over that of ZTEM alone. However, well sampled MT data are to be preferred and offer the simplicity of interpreting just one data type, and possess the superior resolution capability coming with the electric field everywhere, and from their high bandwidth.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Joint inversion of electromagnetic measurements for the determination of water saturation profiles in concrete structures

Highlights: • DC-electrical and dielectric data are combined to estimate concrete saturation degree. • A joint inversion approach of the electromagnetic measurements is proposed. • The sensitivity of the measurements to the saturation model parameters is analysed. • The new joint approach was developed and is applied to synthetic and real data. • The benefits of the joint approach over the inversion of one data type are highlighted. Water saturation profiles in concrete are essential to assess its durability and can be determined using non-destructive techniques, especially the electric and the capacitive methods. In this paper, we propose a new inversion scheme where both resistivity and permittivity measurements are inverted jointly to retrieve the saturation profile. The finite element method is used to model the measurements in 3D, the concrete having a saturation profile with depth, represented by a continuous model taking the form of a Weibull curve with four parameters. A non-linear least-squares optimization based on the Levenberg-Marquardt scheme is developed for the inversion of measurements. Results show that information gathered from both measurements enriches the reconstructed profile, leading to a more reliable estimation of saturation profiles. We believe that the joint inversion method herein developed could lead to the study of more complex phenomena, such as the coupled water-chloride ingress.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Comparison of forward and inverse cam generation methods for the design of cam-linkage mechanisms

This paper presents a comparison between the forward and inverse cam generation methods applied to the design of a multi-lobed cam-rocker slider mechanism for function generation. In the forward method, the cam profile is specified directly and then the linkage output is determined using kinematics. In the inverse method, the trajectory of the output link is specified first and then the cam profile is determined using inverse linkage kinematics. First, the cam-linkage mechanism is introduced, and relevant kinematic equations are presented. Then, the cam generation methods are thoroughly explained. Here, the two cam generation methods are applied to a case study of a hydraulic motor using a multi-lobed cam and multiple linkage mechanisms. While the forward method has direct control of the cam shape, the inverse method has direct control of the linkage output and offers an advantage in calculation speed. For the mechanism selected, the cam designed with the inverse method achieved a reduction of at least 50.97% in the torque ripple when compared to the cam designed with the forward method.

42 ENGINEERING↗
DOE OSTI2023

Accelerating full-waveform inversion using source stacking: synthetic experiments at the global scale in a realistic 3-D earth model

SUMMARY The spectral element method is currently the method of choice for computing accurate synthetic seismic wavefields in realistic 3-D earth models at the global scale. However, it requires significantly more computational time, compared to normal mode-based approximate methods. Source stacking, whereby multiple earthquake sources are aligned on their origin time and simultaneously triggered, can reduce the computational costs by several orders of magnitude. We present the results of synthetic tests performed on a realistic radially anisotropic 3-D model, slightly modified from model SEMUCB-WM1 with three component synthetic waveform ‘data’ for a duration of 10 000 s, and filtered at periods longer than 60 s, for a set of 273 events and 515 stations. We consider two definitions of the misfit function, one based on the stacked records at individual stations and another based on station-pair cross-correlations of the stacked records. The inverse step is performed using a Gauss–Newton approach where the gradient and Hessian are computed using normal mode perturbation theory. We investigate the retrieval of radially anisotropic long wavelength structure in the upper mantle in the depth range 100–800 km, after fixing the crust and uppermost mantle structure constrained by fundamental mode Love and Rayleigh wave dispersion data. The results show good performance using both definitions of the misfit function, even in the presence of realistic noise, with degraded amplitudes of lateral variations in the anisotropic parameter ξ. Interestingly, we show that we can retrieve the long wavelength structure in the upper mantle, when considering one or the other of three portions of the cross-correlation time series, corresponding to where we expect the energy from surface wave overtone, fundamental mode or a mixture of the two to be dominant, respectively. We also considered the issue of missing data, by randomly removing a successively larger proportion of the available synthetic data. We replace the missing data by synthetics computed in the current 3-D model using normal mode perturbation theory. The inversion results degrade with the proportion of missing data, especially for ξ, and we find that a data availability of 45 per cent or more leads to acceptable results. We also present a strategy for grouping events and stations to minimize the number of missing data in each group. This leads to an increased number of computations but can be significantly more efficient than conventional single-event-at-a-time inversion. We apply the grouping strategy to a real picking scenario, and show promising resolution capability despite the use of fewer waveforms and uneven ray path distribution. Source stacking approach can be used to rapidly obtain a starting 3-D model for more conventional full-waveform inversion at higher resolution, and to investigate assumptions made in the inversion, such as trade-offs between isotropic, anisotropic or anelastic structure, different model parametrizations or how crustal structure is accounted for.

Geochemistry & Geophysics↗
DOE OSTI2021

Inverse Design of Two-Dimensional Airfoils Using Conditional Generative Models and Surrogate Log-Likelihoods

Abstract This paper shows how to use conditional generative models in two-dimensional (2D) airfoil optimization to probabilistically predict good initialization points within the vicinity of the optima given the input boundary conditions, thus warm starting and accelerating further optimization. We accommodate the possibility of multiple optimal designs corresponding to the same input boundary condition and take this inversion ambiguity into account when designing our prediction framework. To this end, we first employ the conditional formulation of our previous work BézierGAN–Conditional BézierGAN (CBGAN)—as a baseline, then introduce its sibling conditional entropic BézierGAN (CEBGAN), which is based on optimal transport regularized with entropy. Compared with CBGAN, CEBGAN overcomes mode collapse plaguing conventional GANs, improves the average lift-drag (Cl/Cd) efficiency of airfoil predictions from 80.8% of the optimal value to 95.8%, and meanwhile accelerates the training process by 30.7%. Furthermore, we investigate the unique ability of CEBGAN to produce a log-likelihood lower bound that may help select generated samples of higher performance (e.g., aerodynamic performance). In addition, we provide insights into the performance differences between these two models with low-dimensional toy problems and visualizations. These results and the probabilistic formulation of this inverse problem justify the extension of our GAN-based inverse design paradigm to other inverse design problems or broader inverse problems.

Engineering↗
DOE OSTI2023

Interpretable inverse-designed cavity for on-chip nonlinear photon pair generation

Inverse design is a powerful tool in wave physics for compact, high-performance devices. To date, applications in photonics have mostly been limited to linear systems and it has rarely been investigated or demonstrated in the nonlinear regime. In addition, the “black box” nature of inverse design techniques has hindered the understanding of optimized inverse-designed structures. We propose an inverse design method with interpretable results to enhance the efficiency of on-chip photon generation rate through nonlinear processes by controlling the effective phase-matching conditions. We fabricate and characterize a compact, inverse-designed device using a silicon-on-insulator platform that allows a spontaneous four-wave mixing process to generate photon pairs at a rate of 1.1 MHz with a coincidence to accidental ratio of 162. Our design method accounts for fabrication constraints and can be used for scalable quantum light sources in large-scale communication and computing applications.

42 ENGINEERING↗
DOE OSTI2024

Joint Inversion of Regional Waveform, First-Motion Polarity, and Synthetic Aperture Radar Surface Displacement for the Fourth and Sixth North Korean Declared Nuclear Explosions

Here, this study analyzed the Democratic People’s Republic of Korea’s (DPRK) fourth (DPRK4, 6 January 2016 M w 4.49) and sixth (DPRK6, 7 September 2017 M w 5.2) declared nuclear tests, employing a joint seismic and Interferometric Synthetic Aperture Radar (InSAR) inversion to improve understanding of these events and enhance moment tensor (MT) inversion capabilities. The recent efforts have focused on employing seismic waveform and InSAR geodetic deformation data separately to analyze these and the previous nuclear tests (e.g., Chiang et al., 2018; Myers et al., 2018; Wang et al., 2018). Building upon our previous work (Chi-Durán et al., 2021), we performed a joint regional waveform, first-motion (FM) polarity, and surface displacement inversion, which demonstrated improved source-type discrimination, a revised MT solution with reduced scalar moment uncertainty, and an independently constrained location. In this article, we build on the previous results for DPRK6 by including an analysis using a four-layered velocity model with free-surface topography to compute the near-source static deformation Green’s functions. The model consists of a 50 m basalt layer (⁠V P = 2.07 km/s, V S = 1.2 km/s⁠), a 250 m stratified volcanic deposit layer (⁠V P = 1.73 km/s, V S = 1.0 km/s⁠), a 700 m weathered granodiorite layer (⁠V P = 2.5 km/s, V S = 1.3 km/s⁠⁠), and a granodiorite half-space (⁠V P = 5.35 km/s, V S = 3.09 km/s⁠⁠). The half-space shares the velocity of the regional MDJ2 velocity model (Ford et al., 2010), which has proven effective for waveform inversion in the region. This model considers the range of reported values for various lithologies and weathering effects. Our findings show that using the layered velocity model enhances the recovery of source location and depth for both the explosions by improving fits and reducing uncertainties. The joint inversion also improves source-type discrimination and better constrains the scalar seismic moment necessary for downstream yield estimation.

58 GEOSCIENCES↗
DOE OSTI2022

Proxy-Based Bayesian Inversion Of Poroelastic Simulations To Interpret Strain Tensor Data Measured During Well Testing

The long runtimes of 3D poroelastic numerical simulators makes it impractical to interpret deformation datasets using many inversion schemes. Recent advances in instrumentation have made it possible to measure the strain tensor during well testing, but the lack of robust inversion methods is limiting the ability to interpret these data. We have developed an inversion workflow that reduces the number of computations required to complete a Bayesian inversion using DREAMzs. The workflow trains a KNN model using output from the poroelastic simulator, and then uses the KNN model as a proxy for the simulator during inversion. The workflow also includes a strategy for ensuring the results from the proxy model converge to the results from the simulator, ensuring the accuracy of the final results. An idealized example configured to represent a well test in a deep aquifer is used to verify that the workflow correctly identifies parameters and characterizes noise. Field data measured using strainmeters during an injection test at an oil reservoir in Oklahoma are used to evaluate performance with a real dataset. The workflow identified 265 history matching solutions out of 1240 total simulation runs (21% acceptance ratio), and the results are used to characterize posterior parameter distribution and evaluate the prediction uncertainty. This approach makes it feasible to invert strain data measured during well testing and this has the potential to improve the characterization of aquifers and reservoirs.

Roudini, Soheil↗
DOE OSTI2024

Journey to Time-Variable Moment Tensors through Inversion of Acoustic and Seismoacoustic Data

We explore the capability of acoustic and seismoacoustic datasets to directly resolve a complex, time-variable source consisting of a buried mechanism, represented as a moment tensor, and a spall mechanism, represented as a vertical force at the surface. Traditionally, each component of a resolved moment tensor assumes one underlying source time function, which likely fails to capture the full evolution of a dynamic source, such as an explosion followed by slip on near-source joints or development of spallation. Specifically, we expand previous work to resolve a time-variable moment tensor using single-modality and joint-modality inversion frameworks through analysis of infrasound and seismoacoustic data recorded as part of the Source Physics Experiment Phase II: Dry Alluvium Geology (DAG). We investigate the impact of including signals from seismic-to-air coupling that are local to each infrasound sensor in comparison to mainly atmosphere-propagating acoustic signals, which occur from coupling of the wavefield from the subsurface to the atmosphere directly above the source. Additionally, we assess the ability of our inversion algorithm to fit observed infrasound data using a variety of time-variable source mechanisms. First, we consider the buried moment tensor source alone, which assumes that the determined Green’s functions incorporate effects from spallation or that the impact from spallation is minimal. Second, we examine the estimated buried moment tensor and vertical surface spallation as terms that must both be resolved in the inversion. Third, we assess the ability for an estimated vertical surface spallation source to fit the acoustic data on its own. Finally, we compare results from the joint inversion of both seismic geophone and infrasound acoustic data for the buried-only source compared to buried and spallation sources. Our results are a preliminary investigation into the applications of the inversion technique to recorded datasets and show the technique has limited capabilities using acoustic data alone. Instead, this method shows promise for seismic and seismoacoustic datasets to resolve the time-variable mechanisms of a buried source.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Regularized inversion of aerosol hygroscopic growth factor probability density function: application to humidity-controlled fast integrated mobility spectrometer measurements

Abstract. Aerosol hygroscopic growth plays an important role in atmospheric particle chemistry and the effects of aerosol on radiation and hence climate. The hygroscopic growth is often characterized by a growth factor probability density function (GF-PDF), where the growth factor is defined as the ratio of the particle size at a specified relative humidity to its dry size. Parametric, least-squares methods are the most widely used algorithms for inverting the GF-PDF from measurements of the humidified tandem differential mobility analyzer (HTDMA) and have been recently applied to the GF-PDF inversion from measurements of the humidity-controlled fast integrated mobility spectrometer (HFIMS). However, these least-squares methods suffer from noise amplification due to the lack of regularization in solving the ill-posed problem, resulting in significant fluctuations in the retrieved GF-PDF and even occasional failures of convergence. In this study, we introduce nonparametric, regularized methods to invert the aerosol GF-PDF and apply them to HFIMS measurements. Based on the HFIMS kernel function, the forward convolution is transformed into a matrix-based form, which facilitates the application of the nonparametric inversion methods with regularizations, including Tikhonov regularization and Twomey's iterative regularization. Inversions of the GF-PDF using the nonparameteric methods with regularization are demonstrated using HFIMS measurements simulated from representative GF-PDFs of ambient aerosols. The characteristics of reconstructed GF-PDFs resulting from different inversion methods, including previously developed least-squares methods, are quantitatively compared. The result shows that Twomey's method generally outperforms other inversion methods. The capabilities of Twomey's method in reconstructing the pre-defined GF-PDFs and recovering the mode parameters are validated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

AutoTandemML: Active Learning Enhanced Tandem Neural Networks for Inverse Design Problems

Inverse design in science and engineering involves determining optimal design parameters that achieve desired performance outcomes, a process often hindered by the complexity and high dimensionality of design spaces, leading to significant computational costs. To tackle this challenge, we propose a novel hybrid approach that combines active learning with Tandem Neural Networks to enhance the efficiency and effectiveness of solving inverse design problems. Active learning allows to selectively sample the most informative data points, reducing the required dataset size without compromising accuracy. We investigate this approach using three benchmark problems: airfoil inverse design, photonic surface inverse design, and scalar boundary condition reconstruction in diffusion partial differential equations. We demonstrate that integrating active learning with Tandem Neural Networks outperforms standard approaches across the benchmark suite, achieving better accuracy with fewer training samples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Uncertainty reduction in residual stress measurements by an optimised inverse solution using nonconsecutive polynomials

Many destructive methods for measuring residual stresses such as the slitting method require an inverse analysis to solve the problem. The accuracy of the result as well as an uncertainty component (the model uncertainty) depends on the basis functions used in the inverse solution. The use of a series expansion as the basis functions for the inverse solution was analysed in a previous work for the particular case where functions orders grew consecutively. The present work presents a new estimation of the model uncertainty and a new improved methodology to select the final basis functions for the case where the basis is composed of polynomials. Including nonconsecutive polynomial orders in the basis generates a larger space of possible solutions to be evaluated and allows the possibility to include higher-order polynomials. The paper includes a comparison with two other inverse analyses methodologies applied to synthetically generated data. With the new methodology, the final error is reduced and the uncertainty estimation improved.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Integrating deep neural networks with full-waveform inversion: Reparameterization, regularization, and uncertainty quantification

Full-waveform inversion (FWI) is an accurate imaging approach for modeling the velocity structure by minimizing the misfit between recorded and predicted seismic waveforms. However, the strong nonlinearity of FWI resulting from fitting oscillatory waveforms can trap the optimization in local minima. We have adopted a neural-network-based full-waveform inversion (NNFWI) method that integrates deep neural networks with FWI by representing the velocity model with a generative neural network. Neural networks can naturally introduce spatial correlations as regularization to the generated velocity model, which suppresses noise in the gradients and mitigates local minima. Furthermore, the velocity model generated by neural networks is input to the same partial differential equation (PDE) solvers used in conventional FWI. The gradients of the neural networks and PDEs are calculated using automatic differentiation, which back propagates gradients through the acoustic PDEs and neural network layers to update the weights of the generative neural network. Experiments on 1D velocity models, the Marmousi model, and the 2004 BP model determine that NNFWI can mitigate local minima, especially for imaging high-contrast features such as salt bodies, and it significantly improves the inversion in the presence of noise. Adding dropout layers to the neural network model also allows analyzing the uncertainty of the inversion results through Monte Carlo dropout. NNFWI opens a new pathway to combine deep learning and FWI for exploiting the characteristics of deep neural networks and the high accuracy of PDE solvers. Because NNFWI does not require extra training data and optimization loops, it provides an attractive and straightforward alternative to conventional FWI.

58 GEOSCIENCES↗
DOE OSTI2021

Estimating reaction parameters in mechanism-enabled population balance models of nanoparticle size distributions: A Bayesian inverse problem approach

In order to quantitatively predict nano- as well as other particle-size distributions, one needs to have both a mathematical model and estimates of the parameters that appear in these models. Here, we show how one can use Bayesian inversion to obtain statistical estimates for the parameters that appear in recently derived mechanism-enabled population balance models (ME-PBM) of nanoparticle growth. The Bayesian approach addresses the question of “how well do we know our parameters, along with their uncertainties?.” The results reveal that Bayesian inversion statistical analysis on an example, prototype $\mathrm{lr(0)_n}$ nanoparticle formation system allows one to estimate not just the most likely rate constants and other parameter values, but also their SDs, confidence intervals, and other statistical information. Moreover, knowing the reliability of the mechanistic model's parameters in turn helps inform one about the reliability of the proposed mechanism, as well as the reliability of its predictions. Importantly, the paper can also be seen as a tutorial with the additional goal of achieving a “Gold Standard” Bayesian inversion ME-PBM benchmark that others can use as a control to check their own use of this methodology for other systems of interest throughout nature. Overall, the results provide strong support for the hypothesis that there is substantial value in using a Bayesian inversion methodology for parameter estimation in particle formation systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Forward and inverse modeling of fault transmissibility in subsurface flows

Characterizing physical properties of faults, such as their transmissibility, is crucial for performing predictive numerical simulation of subsurface flows, such as those encountered in petroleum engineering and remediation of subsurface contamination. Here, this paper provides a complete investigation of the inverse problem for fault transmissibility in subsurface flow models, under appropriate assumptions on fault structure. In particular, the following aspects are considered: 1) fault modeling and well-posedness of the forward problem; 2) finite element (FEM) discretizations of the forward problem and their rigorous a priori convergence analysis; 3) Well-posedness of the Bayesian inverse problem, FEM discretization of the infinite dimensional Bayesian inverse formulation, and its rigorous a priori analysis. Moreover, computation of the maximum a posteriori (MAP) point via fast inexact Newton-conjugate gradient optimization and a Laplace approximation of the Bayesian posterior are also presented. Numerical results illustrate the use of the proposed fault model in forward and inverse problems for subsurface flows in two dimensional domains with multiple faults.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Joint impedance and facies inversion of time-lapse seismic data for improving monitoring of CO 2 incidentally stored from CO 2 EOR

Time-lapse seismic monitoring is an effective and proven technology for mapping the distribution of CO 2 in a subsurface reservoir. When injected CO 2 displaces other reservoir fluids, porous-medium properties are changed and thus the seismic impedance changes, causing time-lapse seismic amplitude differences in the injection zones. The analysis and interpretation of images created from these amplitude differences can provide information about reservoir architecture and the CO 2 migration within the reservoir. Incorporating seismic inversion and rock physics into the interpretation of time-lapse seismic data can considerably improve the modeling and monitoring to detect and assess the location of CO 2 over time. The joint inversion method presented in this paper has an integral representation of the geology in the inversion algorithm using elastic facies, which provides information about the spatial distribution of the geologic heterogeneities controlling the movement of fluids in the reservoir. The method was successfully applied to time-lapse seismic data from a mature oil field undergoing CO 2 enhanced oil recovery. The estimated seismic acoustic impedances and facies reflect the characteristics of individual geologic facies and fluid conditions of the reservoir subject to CO 2 injection. Finally, the probabilities estimated by the joint impedance and facies inversion for the reservoir's litho-fluid facies can be used for forecasting CO 2 saturation and pressure changes within the target reservoir.

4D seismic↗
DOE OSTI2023

Band inversion-driven warping and high valley degeneracy

Band inversion is a physical phenomenon that can warp the band structure in topological insulators, generating multiple electronic valleys for conducting carriers. However, the conditions under which band inversion induces warping are not well understood. Here, we derive two general rules that must be satisfied for band warping to occur in centrosymmetric and non-magnetic topological insulators: (1) bands must be sufficiently inverted, and (2) secondary bands must have opposite parity and be close in energy to the band edges. We chart the valley degeneracies that can emerge from band inversion in each of the 11 centrosymmetric point groups, revealing that an increase in the valley degeneracy between 2- and 48-fold is possible from band inversion. The generalized rules offer a unique band engineering approach by capitalizing on the non-trivial electronic structures of topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

SAGIPS: a physics-inspired scalable asynchronous generative inverse-problem solver

Abstract Solving large-scale inverse problems using deep-learning algorithms have become an essential part of modern research and industrial applications. The complexity of the underlying inverse problem may require the utilization of high performance computing systems which poses a challenge on the algorithmic design of the inverse problem solver. Most deep learning algorithms require, due to their design, custom parallelization techniques in order to be resource efficient while showing a reasonable convergence. In this paper we introduce a S calable A synchronous G enerative I nverse P roblem S olver (SAGIPS) on high-performance computing systems. We present a workflow that utilizes an asynchronous ring-allreduce algorithm to transfer the gradients of the generator network across multiple GPUs. Experiments with a scientific proxy application demonstrate that SAGIPS shows near linear weak scaling, together with a convergence quality that is comparable to traditional methods. The approach presented here allows leveraging Generative Adverserial Network across multiple GPUs, promising advancements in solving complex inverse problems at scale.

97 MATHEMATICS AND COMPUTING↗