SEARCH · Engineering Papers

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Interlayer spacing in pillared and grafted MCM-22 type silicas: density functional theory analysis versus experiment

Pillaring of synthetic layered crystalline silicates and aluminosilicates provides a strategy to enhance their adsorption and separation performance, and can facilitate the understanding of such behavior in more complex natural clays. In this study, we perform the first-principles density functional theory calculations for the pillaring of the pure silica polymorph of an MCM-22 type molecular sieve. Starting with a precursor material MCM-22P with fully hydroxylated layers, a pillaring agent, (EtO) 3 SiR, can react with hydroxyl groups (–OH) on adjacent internal surfaces, 2(–OH) + (EtO) 3 SiR + H 2 O → (–O) 2 SiOHR + 3EtOH, to form a pillar bridging these surfaces, or with a single hydroxyl, –OH + (EtO) 3 SiR + 2H 2 O → (–O)Si(OH) 2 R + 3EtOH, grafting to one surface. For computational efficiency, we replace the experimental organic ligand, R, by a methyl group. We find that the interlayer spacing in MCM-22 is reduced by 2.66 Å relative to weakly bound layers in the precursor MCM-22P. Including (–O) 2 SiR bridges for 50% (100%) of the hydroxyl sites in MCM-22P increases the interlayer spacing relative to MCM-22 by 2.52 Å (2.46 Å). For comparison, we also analyze the system where all –OH groups in MCM-22P are replaced by non-bridging grafted (–O)Si(OH) 2 R which results in a smaller interlayer spacing expansion of 2.17 Å relative to MCM-22. Our results for the interlayer spacing in the pillared materials are compatible with experimental observations for a similar MCM-22 type material with low Al content (Si : Al = 51 : 1) of an expansion relative to MCM-22 of roughly 2.8 Å and 2.5 Å from our x-ray diffraction and scanning transmission electron microscopy analyses, respectively. The latter analysis reveals significant variation in individual layer spacings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Interlayer coupling induced quasiparticles

In this work, we present an exact treatment of layered many-body electronic systems in the presence of interlayer coupling within the Schwinger functional derivative approach on the Keldysh contour. Our transparent approach allows us to clarify the definition of interlayer coupling by showing the independent roles hybridization and interactions play in generating new electronic and magnetic excitations. We find interlayer coupling to induce a variety of plasmons, magnons, and excitons, residing within a layer, traversing between layers, or propagating along the interface. Moreover, we predict interfacial excitations, including an electron-hole pairing pathway, facilitated by previously ignored layer nonconserving interactions. Finally, we briefly explore the consequence of interlayer coupling on a bilayer square lattice system.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Twist Angle-Dependent Interlayer Exciton Lifetimes in van der Waals Heterostructures

In van der Waals (vdW) heterostructures formed by stacking two monolayers of transition metal dichalcogenides, multiple exciton resonances with highly tunable properties are formed and subject to both vertical and lateral confinement. We investigate how a unique control knob, the twist angle between the two monolayers, can be used to control the exciton dynamics. We observe that the interlayer exciton lifetimes in MoSe 2 /WSe 2 twisted bilayers (TBLs) change by one order of magnitude when the twist angle is varied from 1° to 3.5°. Additionally, using a low-energy continuum model, we theoretically separate two leading mechanisms that influence interlayer exciton radiative lifetimes. The shift to indirect transitions in the momentum space with an increasing twist angle and the energy modulation from the moiré potential both have a significant impact on interlayer exciton lifetimes. We further predict distinct temperature dependence of interlayer exciton lifetimes in TBLs with different twist angles, which is partially validated by experiments. While many recent studies have highlighted how the twist angle in a vdW TBL can be used to engineer the ground states and quantum phases due to many-body interaction, our studies explore its role in controlling the dynamics of optically excited states, thus, expanding the conceptual applications of “twistronics”.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Effect of relative humidity on the interlayer spacing of phosphate intercalated Mg, Al layered double hydroxide (hydrotalcite‐like) crystals

Abstract The availability of water and the type of interlayer anions present affect the arrangement and interlayer spacing of layered double hydroxide (LDH). A systematic study of the effect of relative humidity (RH) on the basal spacing of phosphate intercalated, magnesium aluminum LDHs (MgAl–PO 4 LDH) was conducted, confirming that MgAl‐PO 4 LDH exhibit distinct interlayer spacing corresponding to separate low‐ and high‐hydration states produced when exposed to low and high humidity conditions. The transition from the low‐ to high‐hydration form begins when RH exceeds 33% and is accompanied by the transition from one to two interlayers of water. An improved understanding of the effect of RH on MgAl–PO 4 LDHs will enable more accurate atomistic modeling and experimental characterization of MgAl–PO 4 LDHs and may lead to improvements in the tunability of MgAl‐PO 4 LDHs for commercial applications such as slow‐release fertilizer.

Reed, Titus↗

DOE OSTI2023

Optical reflectance imaging reveals interlayer coupling in mechanically stacked MoS 2 and WS 2 bilayers

Optical reflectance imaging is a popular technique for characterizing 2D materials, thanks to its simplicity and speed of data acquisition. The use of this method for studying interlayer phenomena in stacked 2D layers has, however, remained limited. Here we demonstrate that optical imaging can reveal the nature of interlayer coupling in stacked MoS 2 and WS 2 bilayers through their observed reflectance contrast versus the substrate. Successful determination of interlayer coupling requires co-optimization of the illumination wavelength and the thickness of an underlying SiO 2 film. Our observations are supported by multilayer optical calculations together with an analysis of the effect of any interlayer gap. This approach promises quick characterization of constructed 2D material systems.

Nguyen, Vu↗

NASA NTRS2003

Antiferromagnetic Interlayer Exchange Coupling in All-Semiconducting EuS/PbS/EuS Trilayers

A comprehensive experimental study on the antiferromagnetic interlayer exchange coupling in high quality epitaxial all-semiconducting EuSPbSEuS trilayers is reported. The influence of substrates, the thickness of the non-magnetic PbS spacer layer, and of temperature, was investigated by means of SQUID magnetometry. In trilayers with a PbS thickness between 4 and 12 deg A the low temperature hysteresis loops showed the signature of antiferromagnetic coupling. The value of the interlayer exchange coupling energy was determined by simulating the data with a modified Stoner model, including Zeeman, anisotropy, and exchange coupling energies. An important observation was of a strong dependence of the interlayer exchange coupling energy on temperature, consistent with a power law dependence of the exchange coupling constant on the saturation magnetization of the EuS layers. While no theoretical description is readily available, we conjecture that the observed behavior is due to a dependence of the interlayer exchange coupling energy on the exchange splitting of the EuS conduction band.

Smits, C. J. P.↗

NASA NTRS2017

TEM Analysis of Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers

Silicon Carbide (SiC) is a promising material for thermostructural applications due to its excellent high-temperature mechanical properties, oxidation resistance, and thermal stability. However, joining and integration technologies are indispensable for this material in order to fabricate large size and complex shape components with desired functionalities. Although diffusion bonding techniques using metallic interlayers have been commonly utilized to bond various SiC ceramics, detailed microstructural observation by Transmission Electron Microscopy (TEM) of the bonded area has not been carried out due to difficulty in preparing TEM samples. In this study, we tried to prepare TEM samples from joints of diffusion bonded SiC ceramics by Focused Ion Beam (FIB) system and carefully investigated the interfacial microstructure by TEM analysis. The samples used in this study were SiC fiber bonded ceramics (SA-Tyrannohex: SA-THX) diffusion bonded with metallic interlayers such as Ti, TiMo, Mo-B and TiCu. In this presentation, we report the microstructure of diffusion bonded SA-THX mainly with TiCu interlayers obtained by TEM observations, and the influence of metallic interlayers on the joint microstructure and microhardness will be discussed.

Ceramics↗

DOE OSTI2021

Interlayer Triplet Energy Transfer in Dion-Jacobson 2D Perovskites Containing Naphthalene Diammonium Cations

The ability to tune the heterojunction energy level alignment in layered 2D perovskites is well documented, with both early works and more recent studies reporting interfacial triplet energy transfer in certain pairings of lead halide with small conjugated organic spacer cations. Such 2D perovskites are promising systems for sensitized molecular phosphorescence, which has varied applications in optoelectronics, solar energy conversion, and more. However, even for a given organic cation core, variations in the cation structure (e.g. location of the ammonium substituent, length of the alkyl linker, and valency of the cation) can dramatically alter the organic layer morphology and electronic coupling between the inorganic and organic layers. While interlayer triplet energy transfer has been studied in Ruddlesden-Popper 2D perovskites containing monovalent naphthalene cations, the photophysical properties of their Dion-Jacobson analogue, formed using divalent naphthalene cations, have not been reported. In this study, we examine interlayer energy transfer in a series of mixed-halide 2D perovskites formed by divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the lead halide exciton level is tuned near resonance with the triplet level of naphthalene, emission from the naphthalene triplet monomer competes with triplet excimer formation. Interlayer energy transfer in these compounds is further supported by ultrafast transient absorption spectroscopy. Ultimately, the ability to gain control over interlayer interactions in layered 2D perovskites through cation design will help uncover new functions and applications for these materials.

2D↗

DOE OSTI2021

Ultrafast Interlayer Charge Transfer between Bilayer PtSe 2 and Monolayer WS 2

Interlayer charge transfer (CT) between PtSe 2 and WS 2 is studied experimentally. Layer-selective pump–probe and photoluminescence quenching measurements reveal ultrafast interlayer CT in the heterostructure formed by bilayer PtSe 2 and monolayer WS 2 , confirming its type-II band alignment. The CT facilitates the formation of the interlayer excitons with a lifetime of several hundred ps to 1 ns, a diffusion coefficient of 0.9 cm 2 s –1 , and a diffusion length reaching 200 nm. Furthermore, these results demonstrate the integration of PtSe 2 with other materials in van der Waals heterostructures with novel charge-transfer properties and help develop fundamental understanding on the performance of various optoelectronic devices based on heterostructures involving PtSe 2 .

36 MATERIALS SCIENCE↗

DOE OSTI2022

Thickness- and Twist-Angle-Dependent Interlayer Excitons in Metal Monochalcogenide Heterostructures

Interlayer excitons, or bound electron-hole pairs whose constituent quasiparticles are located in distinct stacked semiconducting layers, are being intensively studied in heterobilayers of two dimensional semiconductors. They owe their existence to an intrinsic type-II band alignment between both layers that convert these into p-n junctions. Here, we unveil a pronounced interlayer exciton (IX) in heterobilayers of metal monochalcogenides, namely gamma-InSe on epsilon-GaSe, whose pronounced emission is adjustable just by varying their thicknesses given their number of layers dependent direct bandgaps. Time-dependent photoluminescense spectroscopy unveils considerably longer interlayer exciton lifetimes with respect to intralayer ones, thus confirming their nature. The linear Stark effect yields a bound electron-hole pair whose separation d is just (3.6 ± 0.1) Å with d being very close to d Se = 3.4 Å which is the calculated interfacial Se separation. The envelope of IX is twist angle dependent and describable by superimposed emissions that are nearly equally spaced in energy, as if quantized due to localization induced by the small moiré periodicity. Furthermore, these heterostacks are characterized by extremely flat interfacial valence bands making them prime candidates for the observation of magnetism or other correlated electronic phases upon carrier doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

The Effect of Interlayer Delay on the Heat Accumulation, Microstructures, and Properties in Laser Hot Wire Directed Energy Deposition of Ti-6Al-4V Single-Wall

Laser hot wire directed energy deposition (LHW-DED) is a layer-by-layer additive manufacturing technique that permits the fabrication of large-scale Ti-6Al-4V (Ti64) components with a high deposition rate and has gained traction in the aerospace sector in recent years. However, one of the major challenges in LHW-DED Ti64 is heat accumulation, which affects the part quality, microstructure, and properties of as-built specimens. These issues require a comprehensive understanding of the layerwise heat-accumulation-driven process–structure–property relationship in as-deposited samples. In this study, a systematic investigation was performed by fabricating three Ti-6Al-4V single-wall specimens with distinct interlayer delays, i.e., 0, 120, and 300 s. The real-time acquisition of high-fidelity thermal data and high-resolution melt pool images were utilized to demonstrate a direct correlation between layerwise heat accumulation and melt pool dimensions. The results revealed that the maximum heat buildup temperature of the topmost layer decreased from 660 °C to 263 °C with an increase to a 300 s interlayer delay, allowing for better control of the melt pool dimensions, which then resulted in improved part accuracy. Furthermore, the investigation of the location-specific composition, microstructure, and mechanical properties demonstrated that heat buildup resulted in the coarsening of microstructures and, consequently, the reduction of micro-hardness with increasing height. Extending the delay by 120 s resulted in a 5% improvement in the mechanical properties, including an increase in the yield strength from 817 MPa to 859 MPa and the ultimate tensile strength from 914 MPa to 959 MPa. Cooling rates estimated at 900 °C using a one-dimensional thermal model based on a numerical method allowed us to establish the process–structure–property relationship for the wall specimens. The study provides deeper insight into the effect of heat buildup in LHW-DED and serves as a guide for tailoring the properties of as-deposited specimens by regulating interlayer delay.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti 3 C 2 T x , producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti 3 C 2 T x (AA-Ti 3 C 2 ), exhibits higher specific capacitances, and cycling stabilities than pristine Ti 3 C 2 T x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g –1 (1428 mF cm –2 and 492 F cm –3 ) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Furthermore, molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti 3 C 2 T x interlayer, providing insights into the differences in the observed electrochemical behavior.

36 MATERIALS SCIENCE↗

DOE OSTI2024

All‐Solid‐State Lithium–Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self‐Lithiated Sn‐C Interlayer

Abstract All‐solid‐state lithium–sulfur batteries (ASSLSBs) have attracted intense interest due to their high theoretical energy density and intrinsic safety. However, constructing durable lithium (Li) metal anodes with high cycling efficiency in ASSLSBs remains challenging due to poor interface stability. Here, a compositionally stable, self‐lithiated tin (Sn)‐carbon (C) composite interlayer (LSCI) between Li anode and solid‐state electrolyte (SSE), capable of homogenizing Li‐ion transport across the interlayer, mitigating decomposition of SSE, and enhancing electrochemical/structural stability of interface, is developed for ASSLSBs. The LSCI‐mediated Li metal anode enables stable Li plating/stripping over 7000 h without Li dendrite penetration. The ASSLSBs equipped with LSCI thus exhibit excellent cycling stability of over 300 cycles (capacity retention of ≈80%) under low applied pressure (<8 MPa) and demonstrate improved rate capability even at 3C. The enhanced electrochemical performance and corresponding insights of the designed LSCI broaden the spectrum of advanced interlayers for interface manipulation, advancing the practical application of ASSLSBs.

Ye, Lei↗

DOE OSTI2021

Interlayer Interactions in 1D Van der Waals Moiré Superlattices.

Studying two-dimensional (2D) van der Waals (vdW) moiré superlattices and their interlayer interactions have received surging attention after recent discoveries of many new phases of matter that are highly tunable. Different atomistic registry between layers forming the inner and outer nanotubes can also form one-dimensional (1D) vdW moiré superlattices. In this review, experimental observations and theoretical perspectives related to interlayer interactions in 1D vdW moiré superlattices are summarized. The discussion focuses on double-walled carbon nanotubes (DWNTs), a model 1D vdW moiré system, and the authors highlight the new optical features emerging from the non-trivial strong interlayer coupling effect and the unique physics in 1D DWNTs. Future directions and questions in probing the intriguing physical phenomena in 1D vdW moiré superlattices such as, correlated physics in different 1D moiré systems beyond DWNTs are proposed and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Disentangling interlayer confinement and pore surface adsorption in functionalized smectites for tunable ethylene gas capture

Smectite-based adsorbents are increasingly being studied as sustainable packaging materials for scavenging ethylene, a plant hormone that accelerates fruit ripening. However, the mechanisms governing their uptake and retention remain poorly understood. Here, to tackle this question we systematically investigate ethylene gas-solid interactions in pristine, acid-activated, and choline-functionalized montmorillonites using a complementary combination of structural, gravimetric, and spectroscopic techniques, including inelastic neutron scattering. We experimentally distinguish ethylene populations associated with interlayer confinement, mesopore, and external surface adsorption. We show that chemical functionalization distinctly controls adsorption pathways: acid activation enhances total uptake by generating mesoporous adsorption sites and promoting partial interlayer intercalation, yielding capacities comparable to those of leading smectite-based adsorbents, while choline functionalization promotes preferential confinement and stabilization of guest molecules within the interlayer galleries. Advanced spectroscopic analysis provides molecular-level insight into confinement environments and interaction strengths. We also establish clear structure-property relationships by correlating uptake values derived from independent techniques, linking chemical modification, accessible adsorption domains, and retention behavior. These findings provide general design principles for tuning gas-solid interactions in functionalized layered silicates and highlight their potential as adaptable platforms for sustainable ethylene gas capture and selective adsorption technologies.

Ethylene adsorption mechanism↗

DOE OSTI2021

Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails

Highlights: • An in-process interlayer reinforcement approach for 3D concrete printing was proposed through the concurrent deposition of U-nails. • Significant strength and toughness improvement was achieved for U-nail reinforced 3D-printed concrete. • The bridge linking effect and dowel action of U-nails were analysed. • Response surface method were utilised to quantify the effects of U-nails on the interlayer bonding behaviour. 3D concrete printing has tremendous potential for construction manufacturing; however, weak interface bonding between adjacent layers remains a well-known issue that affects the mechanical properties of printed structures. The layers introduce anisotropy and reduce the capacity to resist tensile and shear loads. Reinforcements, inserted perpendicular to the printed layers to traverse the interfaces, can improve these limitations, but the insertion of reinforcements is difficult to achieve in practice, and there are few published studies exploring appropriate methods. This study presents a promising approach using U-shaped nails inserted into concrete during the printing process. The bridging effect and dowel action of the applied U-nails are visualised and analysed to elucidate the toughness improvement. The ultimate tensile strength and shear strength of 3D printed concrete are significantly increased by 145.0% and 220.0%, respectively. U-nails with a filament thickness of 2–2.5 mm are recommended to yield optimal improvement in the interlayer strength.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Plastic-waste hydrogenolysis over two-dimensional MXene-supported ruthenium catalysts with tunable interlayer spacing

The hydrogenolysis of plastics is limited by active-site inaccessibility and inefficient mass transport of bulky polymer chains. To overcome these challenges, this work developed two-dimensional MXene-supported Ru (Ru@MXene) catalysts. Lyophilization of a solution containing dispersed MXene sheets and Ru precursors enabled the confinement of Ru species within the MXene interlayers, which act as pillars to expand the interlayer spacing. Building on this, a silica-pillared MXene-supported Ru (Ru@P-MXene) with even larger interlayer spacing exhibited a reaction rate of 914.9 g C5–C35 g Ru –1 h –1 for the hydrogenolysis of low-density polyethylene (LDPE) into valuable liquid chemicals (e.g., C 5 –C 35 ). A comparison of product yields between Ru@P-MXene and Ru@MXene suggests that elongated Ru particles confined within the MXene support expose their side facets for the reaction. In conclusion, this work demonstrates a new application of MXene in thermochemical catalysis, offering a solution to the challenges of active-site accessibility, mass transport, and reaction confinement in chemical plastic upcycling.

2D materials↗

DOE OSTI2021

Interlayer Triplet Energy Transfer in Dion–Jacobson Two-Dimensional Lead Halide Perovskites Containing Naphthalene Diammonium Cations

Recently, hybrid perovskites have gained attention as sensitizers for molecular triplet generation. Layered, two-dimensional (2D) perovskites are especially well-suited for this purpose because the triplet donor (inorganic framework) and triplet acceptor (organic layer) are self-assembled into adjacent sheets, so that with the appropriate energetics, triplets can be driven across the interface. Here we examine interlayer energy transfer in a series of mixed-halide Dion–Jacobson 2D perovskites containing divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the inorganic exciton is tuned near resonance with the naphthalene triplet, naphthalene monomer phosphorescence competes with triplet excimer formation. The interlayer energy-transfer process is further revealed by ultrafast transient absorption spectroscopy through kinetic variations in triplet excimer formation times. Ultimately, gaining control over interlayer interactions in 2D perovskites through cation design will help uncover new functions and applications for these materials.

2D perovskite↗