Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrothermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Autonomous Nested Search for Hydrothermal Venting

Ocean Worlds in the outer solar system represent one of the best chances for the discovery of extra-terrestrial life. Bodies, such as Europa and Enceladus, are thought to harbor liquid oceans, often encased in a thick icy shell. In order to further investigate these oceans, a new mission concept needs to be developed, a submersible craft. This vehicle would be required to traverse the icy shell and travel hundreds or even thousands of kilometers to survey the ocean below. In doing this, the vehicle might be out of contact for weeks or months at a time. The vehicle must be able to autonomously detect,locate, and study features of interest. One potential target is hydrothermal venting, due to their unique ecosystems on Earth. We have developed an autonomous, nested search strategy to locate sources of hydrothermal venting based on currently used methods. To test this search technique a simulation environment was developed using a hydrothermal plume dispersion simulation and a vehicle model. We show the effectiveness of the search method in this environment.

Seewald, Jeffrey S.↗

Effects of Basalt Composition on a Martian Analogue Magma-Sediment Hydrothermal System Studied Through Thermochemical Modeling

High-temperature hydrothermal systems have been identified on Mars associated with both hypervelocity impacts and magmatic activity on Mars’s early history [1, 2]. These processes may have produced habitable environments by providing heat, energy, and volatile species necessary to support microbial life [3, 4]. Hydrothermal systems formed after the intrusion of mafic magmas in sedimentary rocks are of particular interest when investigating the habitability of high-temperature aqueous environments on Mars [5, 6],because during magma-sediment contact metamorphism bond fluids (e.g. in ice, pore spaces, minerals) are mobilized favoring the alteration of the country rocks and the release of bio-essential elements [7, 8]. The chemistry and mineralogy of these systems on Mars are not well constrained and, for this reason, terrestrial analogues need to be investigated. Costello et al. [5] and Crandall et al. [6] have studied a mafic dike intruding the Jurassic Entrada sandstone (Colorado Plateau, UT). The intrusion has produced a hydrothermal system with Cl-CO2 rich fluids and near-neutral pH, which induced chemical and mineralogical changes in the dike and in the sediments [5, 6]. The system reached temperatures higher than 700 °C around the contact zone [6], but lower temperatures (< 200 °C) were reached as the system cooled down [5] making the environment potentially habitable [6]. However, previous studies do not consider compositional differences between the terrestrial dike and basaltic rocks on Mars [9, 10] making difficult a direct comparison between alteration mineralogy and brine chemistry of terrestrial and martian systems. Here, we use thermochemical modelling to investigate how differences in bulk dike composition will affect secondary mineral assemblages and fluid chemistry.

S Cogliati↗

Evaluation of AUV Search Strategies for the Localization of Hydrothermal Venting

Ocean Worlds represent one of the best chances for the dis- covery of extra-terrestrial life within our own solar system, particularly near sources of hydrothermal venting. To study the oceans on Ocean Worlds will require a new type of mis- sion to penetrate the icy shell, deploy an autonomous under- water vehicle (AUV), and travel potentially hundreds of kilo- both inspired by (Burian et al. 1996). We have improved a meters with minimal contact to Earth based operations teams. previously-developed nested search strategy (Branch et al. To maximize the science return, the AUV would need to be capable of fully autonomously locating and studying scien- tific features of interest. We have developed two strategies to locate sources of hydrothermal venting: a gradient ascent strategy and a greedy transect search strategy. We have im- proved a previously-implemented nested search strategy by adding a vertical search component. Each strategy is tested in a hydrothermal plume dispersion simulation. We compare the effectiveness of each method in this environment.

Seewald, Jeffrey S.↗

Investigating Hydrothermally Altered Basalts in Long Valley, California: Potential Analog for Altered Basalts on Mars

The Long Valley Caldera in California is a well-studied geological site, but its potential as a Mars analog is relatively unexplored. The caldera shows evidence of hydrothermal activity and alteration of basalt units, but prior research has not focused on this. Understanding alteration trends and geochemical signatures in basalt could prove useful in our understanding of Martian geology. Research on Mars has shown alteration trends, but the exact mechanisms behind these, such as the influence of water, heat, and other environmental factors, remain enigmatic. We identified a single basalt flow in Long Valley Caldera, California, that uniquely houses both fumarolic and hydrothermal alteration regimes. By sampling throughout the basalt unit (Fig. 1), we aim to characterize the connections between types, degrees, and durations alteration mechanisms, along with the resultant mineral phases and textures, to better understand rover and orbital data of Mars basalts.

Mars↗

LANDSAT detection of hydrothermal alteration in the Nogal Canyon Cauldron, New Mexico

In 1974 a circular-shaped iron oxide anomaly was observed in an image of a LANDSAT frame centered near Truth or Consequences, New Mexico. Field examination of the anomaly has shown that it coincides with a zone of hydrothermal alteration on the northern edge of the Nogal Canyon Cauldron. The altered area contains clay minerals ranging in colors from white to vivid red, the latter presumably resulting from hematite staining. In situ gas measurements showed no evidence of active hydrogen sulfide seepage. Preliminary geochemical analyses of grab samples have detected no significant amounts of mineralization. Whereas this area does not at present appear to be economically important, it provides an example of how LANDSAT can be utilized in reconnaissance mapping for cauldrons, calderas, and other volcanic features which display hydrothermal alteration.

Vincent, R. K.↗

Evaluation of LANDSAT MSS vs TM simulated data for distinguishing hydrothermal alteration

The LANDSAT Follow-On (LFO) data was simulated to demonstrate the mineral exploration capability of this system for segregating different types of hydrothermal alteration and to compare this capability with that of the existing LANDSAT system. Multispectral data were acquired for several test sites with the Bendix 24-channel MSDS scanner. Contrast enhancements, band ratioing, and principal component transformations were used to process the simulated LFO data for analysis. For Red Mountain, Arizona, the LFO data allowed identification of silicified areas, not identifiable with LANDSAT 1 and 2 data. The improved LFO resolution allowed detection of small silicic outcrops and of a narrow silicified dike. For Cuprite - Ralston, Nevada, the LFO spectral bands allowed discrimination of argillic and opalized altered areas; these could not be spectrally discriminated using LANDSAT 1 and 2 data. Addition of data from the 1.3- and 2.2- micrometer regions allowed better discriminations of hydrothermal alteration types.

Abrams, M. J.↗

The mineralogy and the isotopic composition of sulfur in hydrothermal sulfide/sulfate deposits on the East Pacific Rise, 21 deg N latitude

The mineralogy and isotopic composition of sulfur found in hydrothermal deposits associated with five groups of vents along the ridge axis of the East Pacific Rise near 21 deg N latitude are investigated. Solid samples of mixed sulfides and sulfates from mounds, chimneys and the surrounding sediment as well as fresh basaltic glass were examined with a portable X-ray fluorescence spectrometer and by scanning electron microscopy, X-ray diffractometry, and electron microprobe analysis. For the three vents of exit temperature close to 350 C, the chimneys are found to be rich in copper sulfides, while for those of temperatures around 300 C, zinc sulfide is found to predominate. The major sulfides found in the chimneys include wurtzite, chalcopyrite, pyrite and cubanite, with anhydrite the dominant sulfate. Significant mineralogical differences are found between active and inactive vents. The isotopic composition of sulfur in anhydrites from active vents is observed to be close to that of sea water and consistent with a derivation from sea water sulfate. The isotopic composition of sulfur in the sulfide minerals is explained in terms of precipitation from solutions with reduced sulfur derived from basalts or basaltic magmas, and sea water sulfate. Finally, the deposits are interpreted as the results of the mixing of H2S-dominated hydrothermal fluids with cold sea water near the sea floor.

Styrt, M. M.↗

Hydrothermally altered impact melt rock and breccia - Contributions to the soil of Mars

An examination is made of samples of melt rock and breccia from 12 terrestrial impact craters to identify alteration minerals and their conditions of formation. It is found that in most cases the dominant assemblage is clay-silica-K feldspar-zeolite, suggesting hydrothermal alteration at low pressures and temperatures of 100-300 C. The clays are in the main Fe-chlorites and smectites, in most cases depleted in Al and enriched in Fe and Mg relative to their source rocks. The alteration of impact glass is found often to be complete, whereas the alteration of crystalline melt rock is limited to a few percent of the rock volume. Impact breccia is altered to only a slight extent compared with the alteration of glass. It is believed that impact-induced hydrothermal alteration is to be expected at Martian impact sites if significant quantities of ground ice and/or water are present.

Allen, C. C.↗

Seafloor hydrothermal activity and spreading rates - The Eocene carbon dioxide greenhouse revisited

A suggestion has been made that enhanced rates of hydrothermal activity during the Eocene could have caused a global warming by adding calcium to the ocean and pumping CO2 into the atmosphere (Owen and Rea, 1984). This phenomenon was purported to be consistent with the predictions of the CO2 geochemical cycle model of Berner, Lasaga and Garrels (1983) (henceforth BLAG). In fact, however, the BLAG model predicts only a weak connection between hydrothermal activity and atmospheric CO2 levels. By contrast, it predicts a strong correlation between seafloor spreading rates and pCO2, since the release rate of CO2 from carbonate metamorphism is assumed to be proportional to the mean spreading rate. The Eocene warming can be conveniently explained if the BLAG model is extended by assuming that the rate of carbonate metamorphism is also proportional to the total length of the midocean ridges from which the spreading originates.

Kasting, J. F.↗

Low temperature hydrothermal maturation of organic matter in sediments from the Atlantis II Deep, Red Sea

Hydrocarbons and bulk organic matter of two sediment cores within the Atlantis II Deep are analyzed, and microbial inputs and minor terrestrial sources are found to represent the major sedimentary organic material. Results show that extensive acid-catalyzed reactions are occurring in the sediments, and the Atlantis II Deep is found to exhibit a lower degree of thermal maturation than other hydrothermal or intrusive systems. The lack of carbon number preference noted among the n-alkanes suggests that the organic matter of these sediments has undergone some degree of catagenesis, though yields of hydrocarbons are much lower than those found in other hydrothermal areas, probably due to the effect of lower temperature and poor source-rock characteristics.

Simoneit, Bernd R. T.↗

Identification and spectral characteristics of hydrothermal alteration on Landsat TM imagery of north Chile

This study examines the application of Landsat TM data to the identification of hydrothermal alteration in the arid terrain of the El Salvador region of north Chile. Numerical reflectance values were extracted from the digital Landsat TM data for a variety of rock surfaces, including four parts of the El Salvador gossan, for each of six spectral bands. These reflectance values were analyzed statistically in order to select the three spectral bands, combined as a color composite image, that are most efficient in discriminating different varieties of alteration and for general geological interpretation. The most cost effective composite image for this area is a combination of bands 1, 4 and 7 as the blue, green and red components respectively, with simple contrast enhancement. This image is superior to some much more expensive enhancement techniques and allows unambiguous identification of areas of hydrothermal alteration larger than about 50 m. The display includes a practical guide to the use of Landsat TM imagery for volcanic gold exploration.

Baker, Michael C. W.↗

Anomalous quartz from the Roter Kamm impact crater, Namibia - Evidence for post-impact hydrothermal activity?

Quartz pebbles from the Roter Kamm impact crater (the Namib Desert, SWA/Namibia) were examined for evidence of impact-induced hydrothermal activity, using results from microprobe analyses, neutron activation analyses, transmission IR spectroscopy, and X-ray diffractometry. It was found that the pebbles consisted of pure quartz, which contains three different types of fluid inclusions. These were identified as primary inclusions (5-10 microns) that record the formation conditions of the quartz, very small (less than 1 micron) secondary inclusions associated with the grain boundaries, and late inclusions of irregular size. It is concluded that the quartz and the primary inclusions may provide evidence for a postimpact phase of extensive hydrothermal activity, generated by the residual heat from the kinetic energy of the impact.

Koeberl, Christian↗

A discussion of 'Anomalous quartz from the Roter Kamm impact crater, Namibia - Evidence for post-impact hydrothermal activity?'

This paper presents arguments against the statement made by Koeberl et al. (1989) to the effect that various differences between the quartz of the three quartz pebbles from the Roter Kamm impact crater (Namibia) and the quartz of the pegmatites present in the basement rocks of this crater can be best interpreted as evidence that the pebbles were formed (or 'recrystallized') by a post-impact hydrothermal system. Arguments are presented that suggest that the three quartz pebbles are, most likely, fragments of a preimpact vein quartz of hydrothermal origin.

Roedder, Edwin↗

Chemical environments of submarine hydrothermal systems

The paper synthesizes diverse information about the inorganic geochemistry of submarine hydrothermal systems, provides a description of the fundamental physical and chemical properties of these systems, and examines the implications of high-temperature, fluid-driven processes for organic synthesis. Emphasis is on a few general features, i.e., pressure, temperature, oxidation states, fluid composition, and mineral alteration, because these features will control whether organic synthesis can occur in hydrothermal systems.

Shock, Everett L.↗

Application of MAC-Europe AVIRIS data to the analysis of various alteration stages in the Landdmannalauger Hydrothermal Area (South Iceland)

In June 1991 extensive airborne remote sensing data-sets have been acquired over Iceland in the framework of the joint NASA/ESA Multisensor Airborne Campaign Europe (MAC-Europe). The study area is located within the Torfajokull central volcanic complex in South Iceland. This complex is composed by anomalously abundant rhyolitic acid volcanics, which underwent intensive hydrothermal alteration. Detailed studies of surface alteration of rhyolitic rocks in the area showed that all the major elements are leached as the rock is affected by complex mineralogical changes. Montmorillonite appears during the earliest stages of alteration. In the ultimate alteration product montmorillonite is absent and the rock consists mostly of amorphous silica, anatase, up to a volume of 50% kaolinite and variable amounts of native sulphur and pyrite. The case study presented shall endeavor to assess the potential of MAC-Europe AVIRIS and TMS data in determining a possible zonation of hydrothermal alteration in relationship to the active geo-thermal fields and structural features. To this end, the airborne data is analysed in comparison with laboratory spectral measurements of characteristics rock, soil, and vegetation samples collected in the study areaduring the summer of 1992. Various spectral mapping algorithms as well as unmixing approaches are tested and evaluated. Detailed geological and structural mapping as well as geochemical analysis of the main rock and soil types were performed to underpin the analysis of the airborne data.

Sommer, S.↗

Crustal flushing and its relationship to magnetic and hydrothermal processes on the East Pacific Rise crest

The deep-towed Argo I optical/acoustical vehicle and a geographic information system (GIS) have been used to establish the abundance, widths, and spatial distribution of fissures, as well as the relative age distribution of lavas along the narrow (less than 500 m wide) axial zone of the East Pacific Rise (EPR) from 9 deg 12 min to 9 deg 54 min N. On a second-order scale (approximately 78 km long), wider but less numerous fissures are found in the northern portion of the survey area; this changes to narrower, more abundant fissures in the south. A profile of the cumulative width added by fissures to the axial zone exhibits minima in three areas along strike (near 9 deg 49 min, 9 deg 35 min, and 9 deg 15 min N), where the most recent eruptions have occurred above sites of magmatic injection from the upper mantle, filling and covering older fissures. On a fourth-order scale (5-15 km long) the mean density of fissuring on a given segment is greater where relative axial lava age is greater. Fissure density also correlates with hydrothermal vent abundance and type. Increased cracking toward segment tips is observed at the second-order scale, whereas fourth-order segments tend to be more cracked in the middle. Cracking on a fourth-order scale may be driven by the propagation of dikes, rather than by the far-field plate stresses. The above relations constrain the model of Haymon et al. (1991) in which individual fourth-order segments are in different phases of a volcanic-hydrothermal-tectonic cycle.

Wright, Dawn J.↗

A Hydrothermal Origin for the Sulfate-rich Ocean of Europa

Thermodynamic calculations show that formation of a sulfate-rich ocean on Europa might require high-temperature alkaline hydrothermal processes in the oxidized silicate mantle. The ocean on Europa could be thought of as a cooled hydrothermal fluid. Additional information is contained in the original extended abstract.

Zolotov, M. Yu.↗