Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrostaticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Pressure control of the spin reorientation transition in the rare-earth orthoferrite YbFeO 3

YbFeO 3 is exceptional among the rare-earth orthoferrites for having the lowest spin-reorientation transition (SRT) temperature, T SRT ≃8K, which makes it particularly appealing to examine the interplay between noncollinear magnetism of the Fe sublattice and quasi-one-dimensional XXZ effective S = 1/2 chains of Yb 3+ moments. Our paper focuses on the magnetic dynamics of YbFeO 3 using inelastic neutron scattering (INS), at temperatures below and above the SRT, under an applied hydrostatic pressure of 2 GPa, and in magnetic fields up to 4 T. The low-energy zero-field excitation spectrum at ambient pressure and temperatures below the SRT is dominated by a gapped magnon mode of the Yb subsystem at 0.84 meV with a dispersion only in the [00L] direction. Above T SRT , a continuum appears on top of the magnon mode because of temperature population of the magnon band, and the gap decreases to around 0.4 meV. The INS spectra in the magnetic field, both above and below T SRT , are characterized by two well-separated gapped modes. The SRT is clearly visible at low fields B < 1T, but it gradually disappears at higher magnetic fields. The hydrostatic pressure of p = 2GPa effectively reduces the transition width, ΔT SRT , and keeps the SRT at higher fields up to B≃3T. Here, we discuss the effect of the applied pressure in the frame of the modified mean-field theory and show that in the vicinity of the T SRT the pressure tunes the fourth-order anisotropy constant that effectively reduces the ΔT SRT .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Nonlinear magnons and exchange Hamiltonians of the delafossite proximate quantum spin liquid candidates KYbSe 2 and NaYbSe 2

Quantum spin liquids (QSLs) are theoretical states of matter with long-range entanglement and exotic quasiparticles. However, they generally elude quantitative theory, rendering their underlying phases mysterious and hampering efforts to identify experimental QSL states. Here we study triangular-lattice resonating-valence-bond QSL candidate materials KYbSe 2 and NaYbSe 2 . We measure the magnon modes in their 1/3 plateau phase, where quantitative theory is tractable, using inelastic neutron scattering and fit them using nonlinear spin wave theory. We also fit the KYbSe 2 heat capacity using high-temperature series expansion. Both KYbSe 2 fits yield the same magnetic Hamiltonian to within uncertainty, confirming previous estimates and showing the Heisenberg ratio J 2 / J 1 to be an accurate model for these materials. Most importantly, comparing KYbSe 2 and NaYbSe 2 shows that the smaller A -site Na + ion has a larger J 2 / J 1 ratio. However, hydrostatic pressure applied to KYbSe 2 increases the ordering temperature (a result consistent with density functional theory calculations), indicating that pressure decreases J 2 / J 1 . In conclusion, these results show how the periodic table and hydrostatic pressure can tune the A YbSe 2 materials in a controlled way.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Pressure control of magnetic order and excitations in the pyrochlore antiferromagnet MgCr 2 ⁢O 4

MgCr 2 O 4 is one of the best-known realizations of the pyrochlore-lattice Heisenberg antiferromagnet. The strong antiferromagnetic exchange interactions are perturbed by small further-neighbor exchanges such that this compound may in principle realize a spiral spin liquid (SSL) phase in the zero-temperature limit. However, a spin Jahn-Teller transition below T N ≈ 13 K yields a complicated long-range magnetic order with multiple coexisting propagation vectors. We present neutron scattering and thermomagnetic measurements of MgCr 2 O 4 samples under applied hydrostatic pressure up to P = 1.7 GPa demonstrating the existence of multiple close-lying nearly degenerate magnetic ground states. We show that the application of hydrostatic pressure increases the ordering temperature by around 0.8 K per GPa and increases the bandwidth of the magnetic excitations by around 0.5 meV per GPa. We also evidence a strong tendency for the preferential occupation of a subset of magnetic domains under pressure. In particular, we show that the $k$ = (0,0,1) magnetic phase, which is almost negligible at ambient pressure, dramatically increases in spectral weight under pressure. This modifies the spectrum of magnetic excitations, which we interpret unambiguously as spin waves from multiple magnetic domains. Moreover, we report that the application of pressure reveals a feature in the magnetic susceptibility above the magnetostructural transition. We interpret this as the onset of a short-range ordered phase associated with $k$ = (0,0,1), previously not observed in magnetometry measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Pressure-dependent phase transitions in hybrid improper ferroelectric Ruddlesden-Popper oxides

The temperature-dependent phase transitions in Ruddlesden-Popper oxides with perovskite bilayers have been under increased scrutiny in recent years due to the so-called hybrid improper ferroelectricity that some chemical compositions exhibit. However, little is currently understood about the hydrostatic pressure dependence of these phase transitions. Herein we present the results of a combined high-pressure powder synchrotron x-ray diffraction experiment and a b i n i t i o study on the bilayered Ruddlesden-Popper phases Ca 3 Mn 2 O 7 and Ca 3 Ti 2 O 7 . In both compounds we observe a first-order phase transition, that in combination with our density functional theory calculations, we can confidently assign as being between polar A 2 1 a m and nonpolar A c a a structures. Interestingly, we show that while the application of pressure ultimately favors a nonpolar phase, as is commonly observed for proper ferroelectrics, regions of response exist where pressure actually acts to increase the polar mode amplitudes. The reason for this can be untangled by considering the varied response of octahedral tilts and rotations to hydrostatic pressure and their trilinear coupling with the polar instability. Published by the American Physical Society 2024

Materials Science↗
DOE OSTI2022

Cross-correlation of Dark Energy Survey Year 3 lensing data with ACT and P l a n c k thermal Sunyaev-Zel’dovich effect observations. II. Modeling and constraints on halo pressure profiles

Hot, ionized gas leaves an imprint on the cosmic microwave background via the thermal Sunyaev-Zel’dovich (tSZ) effect. The cross-correlation of gravitational lensing (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) is a powerful probe of the thermal state of ionized baryons throughout the Universe and is sensitive to effects such as baryonic feedback. In a companion paper (Gatti et al. Phys. Rev. D 105, 123525 (2022)), we present tomographic measurements and validation tests of the cross-correlation between Galaxy shear measurements from the first three years of observations of the Dark Energy Survey and tSZ measurements from a combination of Atacama Cosmology Telescope and Planck observations. In this work, we use the same measurements to constrain models for the pressure profiles of halos across a wide range of halo mass and redshift. We find evidence for reduced pressure in low-mass halos, consistent with predictions for the effects of feedback from active Galactic nuclei. We infer the hydrostatic mass bias (B ≡ M 500c /M SZ from our measurements, finding B = 1.8 ± 0.1 when adopting the Planck-preferred cosmological parameters. We additionally find that our measurements are consistent with a nonzero redshift evolution of B, with the correct sign and sufficient magnitude to explain the mass bias necessary to reconcile cluster count measurements with the Planck-preferred cosmology. Our analysis introduces a model for the impact of intrinsic alignments (IAs) of galaxy shapes on the shear-tSZ correlation. We show that IA can have a significant impact on these correlations at current noise levels.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Androgynous { 10 1 ¯ 2 } twin in zinc

Under ambient conditions, Zn is a hexagonal metal with a large c / a ratio of 1.856. Plastic deformation is predominantly accommodated by basal 〈 a 〉 slip and compression twins on the { 10 1 ¯ 2 } planes. Increasing hydrostatic pressure drastically reduces the c / a ratio of Zn and, when a critical threshold of c / a = 3 at about 10 GPa is crossed, the { 10 1 ¯ 2 } twins are predicted to change from compressive to tensile in nature. What happens at the transition point, when c / a = 3 , remains unknown. Here, we strain-cycle a textured polycrystalline sample of pure Zn at uniform hydrostatic pressures ranging between 2 and 17 GPa, over which the c / a ratio crosses the c / a = 3 compressive-tensile transition for { 10 1 ¯ 2 } twins. During deformation, the state of the sample is monitored through x-ray diffraction to extract texture and internal strain evolution. By comparing the experimental results with the predictions of an elastoviscoplastic polycrystal simulation, we confirm the androgynous nature of { 10 1 ¯ 2 } twin response at low and high pressures. When c / a = 3 , polycrystalline Zn does not display any evidence of twinning and its plastic behavior is controlled by mostly basal and pyramidal 〈 c + a 〉 slip activity, with a very small contribution of prismatic 〈 a 〉 slip. Evidence for the activity of other { 10 1 ¯ n } twinning modes, which have been suggested for Zn under high pressure, are not observed. Published by the American Physical Society 2024

Merkel, Sébastien (ORCID:000000032767581X)↗
DOE OSTI2021

Evaluating the Conservation of Energy Variables in Simulations of Deep Moist Convection

Abstract It is often assumed in parcel theory calculations, numerical models, and cumulus parameterizations that moist static energy (MSE) is adiabatically conserved. However, the adiabatic conservation of MSE is only approximate because of the assumption of hydrostatic balance. Two alternative variables are evaluated here: MSE − IB and MSE + KE, wherein IB is the path integral of buoyancy ( B ) and KE is kinetic energy. Both of these variables relax the hydrostatic assumption and are more precisely conserved than MSE. This article quantifies the errors that result from assuming that the aforementioned variables are conserved in large-eddy simulations (LES) of both disorganized and organized deep convection. Results show that both MSE − IB and MSE + KE better predict quantities along trajectories than MSE alone. MSE − IB is better conserved in isolated deep convection, whereas MSE − IB and MSE + KE perform comparably in squall-line simulations. These results are explained by differences between the pressure perturbation behavior of squall lines and isolated convection. Errors in updraft B diagnoses are universally minimized when MSE − IB is assumed to be adiabatically conserved, but only when moisture dependencies of heat capacity and temperature dependency of latent heating are accounted for. When less accurate latent heat and heat capacity formulae were used, MSE − IB yielded poorer B predictions than MSE due to compensating errors. Our results suggest that various applications would benefit from using either MSE − IB or MSE + KE instead of MSE with properly formulated heat capacities and latent heats.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Improved Compaction Experiments and Modeling of Waste Isolation Pilot Plant Standard, Non-degraded, Waste Containers

A credible simulation of disposal room porosity at the Waste Isolation Pilot Plant (WIPP) requires a tenable compaction model for the 55-gallon waste containers within the room. A review of the legacy waste material model, however, revealed several out-of-date and untested assumptions that could affect the model’s compaction behavior. For example, the legacy model predicted non-physical tensile out-of-plane stresses under plane strain compression. (Plane strain compression is similar to waste compaction in the middle of a long drift.) Consequently, a suite of new compaction experiments were performed on containers filled with surrogate, non-degraded, waste. The new experiments involved uniaxial, triaxial, and hydrostatic compaction tests on quarter-scale and full-scale containers. Special effort was made to measure the volume strain during uniaxial and triaxial tests, so that the lateral strain could be inferred from the axial and volume strain. These experimental measurements were then used to calibrate a pressure dependent, viscoplastic, constitutive model for the homogenized compaction behavior of the waste containers. This new waste material model’s predictions agreed far better with the experimental measurements than the legacy model’s predictions, especially under triaxial and hydrostatic conditions. Under plane strain compression, the new model predicted reasonable compressive out-of-plane stresses, instead of tensile stresses. Moreover, the new model’s plane strain behavior was substantially weaker for the same strain, yet substantially stronger for the same porosity, than the legacy model’s behavior. Although room for improvement exists, the new model appears ready for prudent engineering use.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Sizing and Selection of Pressure Relief Valves for High-Pressure Thermal–Hydraulic Systems

This study covers the critical concerns related to the sizing, selection, installation, maintenance, and testing of pressure safety valves (PSVs). The aim is to ensure the safety of pressurized systems, hydrostatic transmission systems, and hydraulic plants, including process plants, thermal power plants, and nuclear reactor systems. PSVs are devices that ensure the safety and reliability of pressurized vessels, lines, and systems during overpressure events. The task of selecting which PSV features are of greatest value for a specific purpose is complex—especially in the design of a high-pressure experimental thermal–hydraulic facility for hydrostatic and transient testing of the reactor system—when the systems are in the design and development phases and require qualification and demonstration to prove that they have reached a given level of technological readiness. The present study highlights the required steps for users to follow the associated rules, guidelines, and recommendations. As a part of this research, case studies are presented to help readers better understand the applicable strategy and standards. A discussion and a review of PSV performance degradation and failure are summarized to provide a better understanding of varied process applications and conditions, including fluid flow dynamics, boundary-layer formation and pressure drops, gas bubble formation and collapse, geometric configurations, inlet/outlet piping, abrupt pressure fluctuations, and acoustic resonance. Moreover, this study discusses the servicing and testing of PSVs in a multiphase pressurized system. Overall, it provides a basic overview of how PSVs ensure the safety of pressurized systems, supported by case studies and industrial practices.

02 PETROLEUM↗
DOE OSTI2021

The effect of aspect ratio on the mechanical behavior of Li metal in solid-state cells

The Li metal anode is necessary for solid-state batteries to dramatically exceed the energy density of state-of-the-art conventional Li-ion batteries. To enable the Li metal anode, the mechanical properties of Li metal under compression in a commercially relevant cell configuration must be determined. This work examines the compression creep behavior of Li metal coupled with a relevant model solid-state electrolyte (Li 6.5 La 3 Ta 0.5 Zr 1.5 O 12 ) and current collector (Ni) as a function of applied stress (1–10 MPa) and Li foil thickness (100–700 μm). At 1 MPa applied stress, the strain rate of all Li foil thicknesses under compression was almost four orders of magnitude lower than what is predicted from tensile creep tests. Steady-state creep behavior was observed for Li foil ≥350 μm at 5 MPa and ≥250 μm at 10 MPa. Conversely, sustained creep deformation was not observed for 100 and 150 μm Li foils at any applied stress. It is suggested that friction at the Li/LLZO and Li/Ni interfaces leads to the formation of hydrostatic stress that controls Li deformation at low aspect ratios. Finally, these results have implications for battery pack stack pressure requirements, particularly relating to void formation during stripping and Li metal filament penetration during plating.

25 ENERGY STORAGE↗
DOE OSTI2023

Pressure-Dependent Magnetic Properties of Quasi-2D Cr 2 Si 2 Te 6 and Mn 3 Si 2 Te 6

Recently, pressure has been used to induce structural and magnetic phase transitions in many layered quantum materials whose layers are linked by van der Waals forces. Materials with such weakly held layers allow for relatively easy manipulation of the superexchange mechanism, which can give rise to novel magnetic behavior. Here, using hydrostatic pressure as a disorderless means to manipulate the interlayer coupling, we applied pressure on two quasi-2D sister compounds, namely, Cr 2 Si 2 Te 6 (CST) and Mn 3 Si 2 Te 6 (MST), up to ~1 GPa. Magnetic property measurements with the application of pressure revealed that the ferromagnetic transition temperature decreases in CST, while the opposite occurs for the ferrimagnetic MST. In MST, magnetization decreases with the increase in pressure, and such a trend is not clearly observed within the pressure range studied for CST. The overall pressure effect on magnetic characteristics such as exchange couplings and magnetic anisotropy energies is also examined theoretically using density functional theory. Exchange coupling in MST is strongly frustrated, and the first nearest neighbor interaction is the most dominant of the components with the strongest pressure dependence. In CST, the exchange coupling parameters exhibit very little dependence on pressure. This combined experimental and theoretical work has the potential to expand to other relevant quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Planar, longitudinal, compressive waves in solids: Thermodynamics and uniaxial strain restrictions

A new tri-axial pressure-based constitutive expression has been found using Cauchy's stress tensor. This stress state emphasizes pressure and shear stress. The description is a pressure plus an effective shear stress allowing for a constitutive law based on atomic solid-state phase changes in crystalline cells due to pressure plus shear-based dislocation motion commonly associated with plasticity. Pressure has a new role in the material's constitutive response as it is separated from plasticity. The thermo-mechanical system describes third-order Gibbs’ expressions without specific volume restrictions placed upon the material. Isothermally, the ratio of heat to shear work in elastic copper is shown to approach zero at a very low temperature and become larger than one as temperature approaches melting. Wave compression models investigated are elastic and plastic: in fully elastic materials, the planar wave is restricted by Poisson's effect although plastic shear changes this constraint. Plastic deformation, dominated by dissipative shear stresses in uniaxial strain, heats the material while excluding phase changes from hydrostatic pressures. The material properties per se across Hugoniot shocks are described with entropy concepts. Shock waves are exceedingly complex since the constitutive laws are linked at extreme temperatures, pressures, and shear stresses. Isothermal, isentropic, isochoric, and iso-shear conditions are used throughout with Jacobian algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Nanolamellar phase transition in an additively manufactured eutectic high-entropy alloy under high pressures

Much is unknown about how phase transitions link to micro-/nano-structures in high-entropy systems, especially under extreme pressure and temperature conditions. This work studies the evolution of dual-phase nanolamellar eutectic high-entropy alloy phases of AlCoCrFeNi 2.1 generated by laser powder-bed fusion (L-PBF) for pressures up to 42 GPa. We compare quasi-hydrostatic high pressure synchrotron x-ray diffraction studies on L-PBF printed cylindrical samples up to 5.5 GPa (large-volume Paris–Edinburgh cell) to those carried out on an L-PBF printed foil in a diamond anvil cell where the pressure reached 42 GPa. Our results show that the initially alternating face-centered cubic (FCC) and body-centered cubic (BCC) nanolamellar structure of AlCoCrFeNi 2.1 transformed into single-phase FCC nanolamellae under high pressure with BCC–FCC phase transformation completion at 21 ± 3 GPa. Our results indicate a diffusionless BCC–FCC transformation in this additively manufactured far-from-equilibrium microstructure and demonstrate that the FCC phase is stable up to very high pressures. The measured equation of state for the FCC phase of AlCoCrFeNi 2.1 is presented up to 42 GPa and shows excellent agreement between the data obtained in large-volume press and diamond anvil cell experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simultaneous compression of NaCl, Au, and ruby: toward mutually consistent pressure scales

Here, we evaluate pressure consistency of equations of state (EOS) for NaCl and Au at 300 K. The simultaneous measurements of unit-cell volumes (V) with ruby R1 line shifts (Δλ) in a helium (He) loaded diamond cell effectively remove potential systematic errors. Compression and decompression data were automatically collected at 1 sec interval, yielding a dense dataset with >8,000 (V, Δλ) pairs each for NaCl and Au. Solidification of He has noticeable effects on both V and Delta lambda (hence P). Only data up to similar to 14 GPa, or 6000 (V, P) pairs, can be considered hydrostatic within the resolution. The P-V data are fitted to the Rydberg-Vinet and the 3 rd order Birch-Murnaghan EOS. Predicted pressures of these EOSs agree with those given by the Ruby2020 ruby scale to within +/- 0.05 GPa. Overall, pressures predicted by the Rydberg-Vinet EOS are in better agreement with the average of commonly used NaCl and Au pressure scales.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Model, data, and code for paper "Modeling of streamflow in a 30-kilometer-long reach spanning 5 years using OpenFOAM 5.x"

The data package includes data, model, and code that support the analyses and conclusions in the paper titled “modeling of streamflow in a 30-kilometer-long reach spanning 5 years using OpenFOAM 5.x”. The primary goal of this paper is to demonstrate that key streamflow properties such as water depth, flow velocity, and dynamic pressure in a natural river at 30-kilometer scale over 5 years can be reliably and efficiently modeled using the computational framework presented in this paper. To support the paper, various data types from remote sensing, field observations, and computational models are used. Specific details are described as follows. Firstly, the river bathymetry data was obtained from a Light Detection and Ranging (LiDAR) survey. This data is then converted to a triangulated surface format, STL, for mesh generation in OpenFOAM. The STL data can be found in Model_Setups/BaseCase_2013To2015/constant/triSurface. The OpenFOAM mesh generated using this STL file can be found in constant/polyMesh. Other model setups, boundary and initial conditions can be found in /system and /0.org under folder BaseCase_2013To2015. A similar data structure can also be found in BaseCase_2018To2019 for the simulations during 2018 and 2019. Secondly, the OpenFOAM simulations need the upstream discharge and water depth information at the upstream boundary to drive the model. These data are generated from a one-dimensional hydraulic model and the data can be found under the folder Model_Setups /1D model Mass1 data. The mass1_65.csv and mass1_191.csv files include the results of the 1D model at the model inlet and outlet, respectively. The Matlab source code Mass1ToOFBC20182019.m is used to convert these data into OpenFOAM boundary condition setups.With the above OpenFOAM model, it can generate data for water surface elevation, flow velocity, and dynamic pressure. In this paper, the water surface elevation was measured at 7 locations during different periods between 2011 and 2019. The exact survey locations (see Fig1_SurveyLocations.txt) can be found in folder Fig_1. The variation of water stage over time at the 7 locations can be found in folder /Observation_WSE. The data type include .txt, .csv, .xlsx, and .mat. The .mat data can be loaded by Matlab.We also measured the flow velocities at 12 cross-sections along the river. At each cross-section, we recorded the x, y locations, depth, three velocity components u,v,w. These data are saved to a Matlab format which can be found under folder /Observation_Velocity and /Fig_1. The relative locations of velocity survey locations to the river bathymetry can be found in Figure 1c.The water stage data at the 7 locations from OpenFOAM, 1D, and 2D hydraulic models are also provided to evaluate the long-term performance of 3D models vs 1D/2D models. The water stage data for the 7 locations from OpenFOAM have been saved to .mat format and can be found in /OpenFOAM_WSE. The water stage data from the 1D model are saved in .csv format and can be found in /Mass1_WSE. The water stage from the 2D model is saved as .mat format and can be found in / Mass2_WSEIn addition, the OpenFOAM model outputs the information of hydrostatic and hydrodynamic pressure. They are saved as .mat format under folder /Fig_11/2013_1. As the files are too large, we only uploaded the data for January 2013. The area of different ratio of dynamic pressure to static pressure for all simulation range, i.e., 2013-2015, are saved to .mat format. They can be found in /Fig_11/PA. Further, the data of wall clock time versus the solution time of the OpenFOAM modeling are also saved to .mat format under folder /Fig_13/LogsMat. In summary, the data package contains seven data types, including .txt, .csv, .xlsx, .dat, .stl, .m, and .mat. The former 4 types can be directly open using a text editor or Microsoft Office. The .mat format needs to be read by Matlab. The Matlab source code .m files need to be run with Matlab. The OpenFOAM setups can be visualized in ParaView. The .stl file can be opened in ParaView or Blender. The data in subfolders Fig_1 to Fig_10 and Fig_12 are copied from the aforementioned data folders to generate specific figures for the paper. A readME.txt file is included in each subfolder to further describe how the data in each folder are generated and used to support the paper.Please use the data package's DOI to cite the data package. Please contact yunxiang.chen@pnnl.gov if you need more data related to the paper.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Efficient, Compact, and Smooth Variable Propulsion Motor (Final Report)

In this project, a new architecture of highly efficient hydraulic motor was developed for the propulsion of off-highway vehicles. The motor uses an adjustable linkage driving a cam to vary the displacement of the piston, resulting in a Variable Displacement Linkage Motor (VDLM). The motor uses low friction rolling element bearings to significantly reduce mechanical friction, especially in the demanding low-speed high-torque conditions experienced by off-highway vehicles. The VDLM has high torque capabilities for its size due to the radial piston packaging and use of a multi-lobe cam. A VDLM is very smooth due to the ability to tune the torque ripple through the design of the cam profile. The project was divided into three periods. During the first period, a dynamic model was constructed of the motor to predict the performance of the motor and the vehicle. During the second period, a single-cylinder learning prototype was designed, built, and tested to validate the models constructed in the first period. In the third period, a multi-cylinder prototype motor was optimized, designed, fabricated, and tested. The motor demonstrated excellent mechanical efficiency (above 92.5% across the range of displacements), but the experimentally measure volumetric efficiency was lower than expected due to higher leakage rates created by the poor tolerance control on the prototype. To validate the dynamic models developed in the first period and better understand design trade-offs. In the third period a multi-cylinder concept demonstration prototype will be designed, fabricated, and tested. The final prototype will be tested on a motor dynamometer and will be utilized in hardware-in-the-loop testing to demonstrate its efficiency and performance impacts on the overall drive train. The experimental results were used in a drive train simulation of a compact track loader operating through a drive cycle. Using the VDLM in a hydrostatic circuit yielded 17.1% reduction in fuel consumption and 36.5% reduction in a series hybrid transmission.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Stimuli‐Responsive Emission from Hybrid Metal Halides

Abstract Stimuli‐responsive photoluminescent (PL) materials have attracted considerable attention in recent years owing to their potential applications in anti‐counterfeiting, information encryption, and sensing. Further investigations of the transformation mechanism and potential applications of stimulus‐responsive PL materials are considerably important. In the current study, an organic–inorganic metal halide, C 9 H 15 N 3 SbCl 5 ([C 9 H 13 N 3 ] 2+ is a 1‐(2‐pyridyl) piperazine cation) is obtained, which exhibits a 0D structure withP‐1 space group. At room temperature, when excited by UV light, the C 9 H 15 N 3 SbCl 5 single crystals exhibit unimodal blue light emission at 405 nm, and grinding or hydrostatic pressure induces double‐peak emissions at 405 and 650 nm. Interestingly, double‐emission samples can be restored to single‐emission samples by short annealing or storage in air for 2 weeks, and this process is reversible. Luminescence response to mechanical stimuli can also be achieved in the presence of hydrochloric acid and water. Spectral analysis and the analysis of the microstructural changes revealed that the structural modifications of the inorganic group play a pivotal role in the response to the stimulus. Finally, a composite film device based on C 9 H 15 N 3 SbCl 5 is prepared to demonstrate the potential of these smart materials in anti‐counterfeiting and sensing applications.

Chemistry↗
DOE OSTI2026

Reducing the Strain Required for Ambient‐Pressure Superconductivity in Ruddlesden‐Popper Bilayer Nickelates

ABSTRACT The discovery of high‐temperature superconductivity in pressurized bulk Ruddlesden‐Popper (RP) bilayer nickelates has prompted the conjecture that epitaxial compressive strain might mimic essential aspects of hydrostatic pressure. The realization of superconductivity in films on SrLaAlO 4 (001) (SLAO) supports this correspondence, yet it remains unclear whether the pressure–temperature phase diagram of RP bilayer nickelates can be systematically mapped (and studied at ambient pressure) as a function of epitaxial strain. To this end, experimental access near the elusive edge of the superconducting phase boundary would provide invaluable insight into the nature of the superconducting state and the ground state from which it emerges. Here we report superconducting RP bilayer nickelates grown on LaAlO 3 (001) (LAO), where the compressive strain required for ambient‐pressure superconductivity is nearly halved to −1.2%. These films exhibit a superconducting onset above 10 K and reach zero resistance at 3 K, with normal‐state transport properties differing from those of films grown on SLAO. Our comparative study shows that strain–rather than interfacial structure is the primary factor governing the superconductivity and normal‐state properties. This work offers a new opportunity to probe emergent phenomena near the superconducting phase boundary in the strain–temperature phase diagram of RP bilayer nickelates.

Tarn, Yaoju [Department of Applied Physics Stanfor↗