Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrated sulfates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

SHERLOC Investigations at the Máaz and Séítah formations within Jezero crater

Introduction: The Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) instrument combines microscopic imaging, native fluorescence and Raman spectroscopy to better understand the mineral and chemical makeup of rocks on the martian surface. Native fluorescence emissions from aromatic organic species allow for detection and classification of aromatic organic molecules, whereas Raman scattered photons from molecules allow identification of functional groups of organics, chemicals, and minerals. These signatures are obtained on a 100 micron spatial scale and collocated to images so textures, minerals and chemicals can all be compared [1]. Results: SHERLOC has been operating on Mars since February 18, 2021. As of this writing, we have analyzed 3 natural surfaces, and 5 abraded rock patches created during the Crater Floor Campaign within Jezero crater [2]. The Guillaumes target (from the Roubion outcrop, Roubion member of the Máaz Formation) is dominated by Ca-sulfate with patches of perchlorate. The Bellegarde target (from the Rochette outcrop, Rochette member of the Máaz Formation) exhibits Raman peaks that match hydrated Ca-sulfate, amorphous/microcrystalline silicate (AMS), carbonate, and phosphate phases. A fluorescence doublet at ~305 and ~325 nm was detected and is most likely due to indigenous organic material in the sample. The Garde target (from the Bastide outcrop, Bastide member of the Séítah Formation) is dominated by olivine and carbonate with AMS occurring across the material. The Dourbes target (from the Brac outcrop, Bastide member of the Séítah Formation) is dominated by olivine and shows minor amounts of carbonate, hydrated Ca-sulfate, and AMS. The Quartier target exhibits a large sulfate feature, as well as carbonate, perchlorate, olivine and a fluorescence doublet at 305 and 325 nm and is very similar to that observed at Bellegarde. In each of these samples we have identified fluorescence features that are likely aromatic organics native to the rock interiors. Acknowledgments: This work was carried out at the Jet Propulsion Laboratory, The California Institute of Technology under a contract from NASA.

L W Beegle↗

Similarities Across Mars: Acidic Fluids at Both Meridiani Planum and Gale Crater in the Formation of Magnesium-Nickel Sulfates

In-situ identification of sulfates at the martian surface by the Mars Exploration Rovers and the Mars Science Laboratory have included calcium sulfates with various states of hydration (gypsum, bassanite, anhydrite), iron sulfates of likely fumarolic origin, massive deposits of iron hydroxysulfates indicative of an acidic history, and minor occurrences of magnesium sulfates. Recent measurements by the Opportunity and Curiosity Alpha Particle X-ray Spectrometers (APXS) have indicated the presence of Ni-substituted Mg-sulfates at the Meridiani Planum and Gale Crater landing sites. The Opportunity rover has traversed nearly 43 km and is currently exploring the impact breccias of the rim of Endeavour crater, near a location where signatures of aqueous alteration have been established from orbit. APXS analyses of subsurface materials excavated by a rover wheel show clear evidence for a Mg(Ni)-sulfate with Mg:Ni (is) approximately 100:1 (molar). On the other side of the planet, Curiosity is continuing its climb up Mount Sharp after driving (is) approximately 13 km since landing. Over the last 4 km of the traverse, there have been multiple chemical analyses of erosionally-resistant nodules and dendritic features in a finely laminated mudstone unit which also indicate Mg(Ni)-sulfate (Mg:Ni (is) approximately 30:1, molar). The geologic settings for the Endeavour rim and the Mount Sharp mudstones are clearly different, but similar formation conditions for these sulfates may be possible. Ni(2+) readily substitutes for Mg(2+) in a variety of geochemical processes due to their comparable ionic radii. The availability of soluble Ni at the time of Mg-sulfate precipitation suggests acidic solutions. The fluids responsible for alteration in the Endeavour rim and for the formation of nodules in Gale mudstones may have had similar chemical characteristics at the time the Mg-sulfates were formed.

Yen, Albert S.↗

Stratigraphic Change from Ca-Sulfate to Mg-Sulfate in the Sedimentary Bedrock of Gale Crater, Mars: Recent Results from Curiosity’s APXS

Curiosity’s APXS instrument has been quantifying sulfates over >30 km of traverse in Gale crater. The rover recently arrived at sedimentary strata where orbital data predicted hydrated Mg-sulfates that may record a change to a drier paleoenvironment. The sequence of strata is in the Marker Band Valley (MBV), the ~10-m-thick, metal-rich Marker Band (MB), and strata above the MB. Here, we report recent sulfate observations by the APXS and provide constraints on the occurrence of Mg-sulfate and the implications for paleoenvironment interpretations. In sedimentary strata below the MBV, Mg-sulfate enrichment (~5-10 wt%) is generally limited to larger diagenetic nodules (~1-3 cm). Ca is positively correlated with S at proportions consistent with Ca-sulfate addition to the bedrock matrix. S variation is thus controlled primarily by Ca-sulfate, which increases ~30% in transitional units below the MBV. The MBV contains the first evidence of Mg-sulfate enrichment in the bedrock matrix, confirmed by the detection of crystalline Mg-sulfate by CheMin. The MBV bedrock has the same overall bulk composition as the underlying Mt. Sharp gp. strata, but with an additional ~5-15 wt% Mg-sulfate. The MB has contrasting sulfate content: (1) targets with very high concentrations of MnO (1.5 wt%), FeO (47 wt%), and Zn (2.2 wt%) are depleted in S and (2) targets with lower metal content have evidence of Mg-sulfate addition. Strata above the MB have a bulk composition that is distinct from other rocks in Gale. For example, the bedrock has molar Fe/Mn (50-60) and Cr/Ti (0.4-0.7) similar to basaltic soil, but ~3X higher Zn and high Ge (50 ppm). Median SO3 above the MB (15 wt%) is higher than the MBV (14 wt%) as well as strata below the MBV (~8 wt%). S does not correlate with Ca or Mg above the MBV. MgO (~9 wt%) is higher than below the MBV (~5 wt%) and the SO3/MgO (1.7) is in the same range as the Mg-sulfate-bearing MBV, suggesting Mg-sulfate enrichment. APXS data indicate that the MBV and above the MB preserve a relatively sharp vertical transition (~5-10 m) from Ca-sulfate to Mg-sulfate in the rock matrix. The sharp contacts with the sulfate-depleted MB and the notable change in bulk composition above the MB may indicate a complex depositional and/or diagenetic history under conditions where enrichments in the highly soluble Mg-sulfates were ultimately preserved.

Jeffrey Allan Berger↗

A Model for Formation of Dust, Soil and Rock Coatings on Mars: Physical and Chemical Processes on the Martian Surface

This model is one of many possible scenarios to explain the generation of the current surface material on Mars using chemical, magnetic and spectroscopic data From Mars and geologic analogs from terrestrial sites. One basic premise of this model is that the dust/soil units are not derived exclusively from local rocks, but are rather a product of global, and possibly remote, weathering processes. Another assumption in this model is that there are physical and chemical interactions of the atmospheric dust particles and that these two processes create distinctly different results on the surface. Physical processes distribute dust particles on rocks and drift units, forming physically-aggregated layers; these are reversible processes. Chemical reactions of the dust/soil particles create alteration rinds on rock surfaces and cohesive, crusted surface units between rocks, both of which are relatively permanent materials. According to this model the dominant components of the dust/soil particles are derived from alteration of volcanic ash and tephra, and contain primarily nanophase and poorly crystalline ferric oxides/oxyhydroxide phases as well as silicates. These phases are the alteration products that formed in a low moisture environment. These dust/soil particles also contain a smaller amount of material that was exposed to more water and contains crystalline ferric oxides/oxyhydroxides, sulfates and clay silicates. These components could have formed through hydrothermal alteration at steam vents or fumeroles, thermal fluids, or through evaporite deposits. Wet/dry cycling experiments are presented here on mixtures containing poorly crystalline and crystalline ferric oxides/oxyhydroxides, sulfates and silicates that range in size from nanophase to 1-2 pm diameter particles. Cemented products of these soil mixtures are formed in these experiments and variation in the surface texture was observed for samples containing smectites, non-hydrated silicates or sulfates. Reflectance spectra were measured of the initial particulate mixtures, the cemented products and ground versions of the cemented material. The spectral contrast in the visible/near-infrared and mid-infrared regions is significantly reduced for the cemented material compared to the initial soil, and somewhat reduced for the ground, cemented soil compared to the initial soil. The results of this study suggest that diurnal and seasonal cycling on Mars will have a profound effect on the texture and spectral properties of the dust/soil particles on the surface. The model developed in this study provides an explanation for the generation of cemented or crusted soil units and rock coatings on Mars and may explain albedo variations on the surface observed near large rocks or crater rims.

Bishop, Janice↗

Visible and Near-IR Reflectance Spectra for Smectite, Sulfate And Perchlorate under Dry Conditions for Interpretation of Martian Surface Mineralogy

Visible and near-IR (VNIR) spectral data for the martian surface obtained from orbit by the MRO-CRISM and OMEGA instruments are interpreted as having spectral signatures of H2O/OH-bearing phases, including smectites and other phyllosilicates, sulfates, and high-SiO2 phases [e.g., 1-4]. Interpretations of martian spectral signatures are based on and constrained by spectra that are obtained in the laboratory on samples with known mineralogical compositions and other physicochemical characteristics under, as appropriate, Mars-like environmental conditions (e.g., temperature, pressure, and humidity). With respect to environmental conditions, differences in the absolute concentration of atmospheric H2O can effect the hydration state and therefore the spectra signatures of smectite phyllosilicates (solvation H2O) and certain sulfates (hydration H2O) [e.g., 5-7]. We report VNIR spectral data acquired under humid (laboratory air) and dry (dry N2 gas) environments for two natural smectites (nontronite API-33A and saponite SapCa-1) to characterize the effect of solvation H2O on spectral properties. We also report spectral data for the thermal dehydration products of (1) melanterite (FeSO4.7H2O) in both air and dry N2 gas and (2) Mg-perchlorate (Mg(ClO4)2.6H2O) in dry N2 environments. Spectral measurements for samples dehydrated in dry N2 were made without exposing them to humid laboratory air.

Morris, R.V.↗

Discovery Venera surface: Atmosphere geochemistry experiments mission concept

The phenomenal increase in our understanding of Venus provided by the Magellan Mission has raised a series of focused, fundamental scientific questions about the geochemistry of the surface of Venus, the nature of the lower atmosphere, and the relationship of the lower atmosphere and surface. First, surface geochemical measurements from the Venera/Vega spacecraft showed that widely spaced regions of the venusian plains are made of basalts; thus basalts are significant and may be the only component of the venusian crust. But we lack information on the composition of several key elements of Venus geology: (1) Tessera terrain (which may be outcrops of continental-like non-basaltic crustal material) and steep-sided domes/festoons are promising candidates for non-basaltic geochemically evolved material. The composition of the lower part of the Venusian crust is unknown: however, ejecta from large venusian craters provides us with the possibility of sampling this material on the surface; (2) bulk chemistry (structure and dynamics) of the venusian atmosphere are known. The altitude profiles of water vapor content and minor admixtures relevant to redox conditions in the lower atmosphere (less than 20 km altitude) remain uncertain. Lack of that knowledge means that we do not understand the fine chemical structure of the main mass of the Venusian atmosphere; and (3) thermodynamic models predict that igneous materials on the surface of Venus should react with gases of the venusian atmosphere. But because the water vapor content and redox conditions in the lower atmosphere are not well known, we do not understand the nature of venusian weathering: oxidation, sulfatization, carbonatization, and hydration. The answers to these questions are critical to the understanding of Venus, the most Earth-like of the terrestrial planets.

Surkov, Yuri A.↗

Zeolite Formation and Weathering Processes in Dry Valleys of Antartica: Martian Analogs

Terrestrial weathering processes in cold-desert climates such as the Dry Valleys of Antarctica may provide an excellent analog to chemical weathering and diagenesis of soils on Mars. Detailed studies of soil development and the chemical and mineralogical alterations occurring within soil columns in Wright Valley, Antarctica show incredible complexity in the upper meter of soil. Previous workers noted the ice-free Dry Valleys are the best terrestrial approximations to contemporary Mars. Images returned from the Pathfinder and Spirit landers show similarities to surfaces observed within the Dry Valleys. Similarities to Mars that exist in these valleys are: mean temperatures always below freezing (-20 C), no rainfall, sparse snowfall-rapidly removed by sublimation, desiccating winds, diurnal freeze-thaw cycles (even during daylight hours), low humidity, oxidative environment, relatively high solar radiation and low magnetic fields . The Dry Valley soils contain irregular distributions and low abundances of soil microorganisms that are somewhat unusual on Earth. Physical processes-such as sand abrasion-are dominant mechanisms of rock weathering in Antarctica. However, chemical weathering is also an important process even in such extreme climates. For example, ionic migration occurs even in frozen soils along liquid films on individual soil particles. It has also been shown that water with liquid-like properties is present in soils at temperatures on the order of approx.-80 C and it has been observed that the percentage of oxidized iron increases with increasing soil age and enrichments in oxidized iron occurs toward the surface. The presence of evaporates is evident and appear similar to "evaporite sites" within the Pathfinder and Spirit sites. Evaporites indicate ionic migration and chemical activity even in the permanently frozen zone. The presence of evaporates indicates that chemical weathering of rocks and possibly soils has been active. Authogenic zeolites have been identified within the soil columns because they are fragile; i.e. they are euhedral, unabraded, and unfractured, strongly suggesting in situ formation. Their presence in Antarctic samples is another indication that diagenic processes are active in cold-desert environments. The presence of zeolites, and other clays along with halites, sulfates, carbonates, and hydrates are to be expected within the soil columns on Mars at the Gusev and Isidis Planitia regions. The presence of such water-bearing minerals beneath the surface supplies one of the requirements to support biological activity on Mars.

Gibson, E. K., Jr.↗

Assessing Organic Preservation and the Implications for Potential Biosignatures in the Bastide Member of the Séítah Formation, Jezero Crater

Introduction: Olivine has the highest CO2 trapping potential of ultramafic minerals, due to its rapid rate of dissolution and high percentage of divalent cations/unpolymerized silicate tetrahedra [1]. It generates divalent carbonates from CO2 and sequesters CO2 into the mineral matrix of the target lithology. The co-occurrence of olivine and carbonate within abraded targets from the Bastide Member of the Séítah Formation (Fm) of the Jezero crater floor [2] suggests the carbonation of olivine occurred within the mineral matrix hosted in a subsurface system. Hydrothermal origins for the subsurface system are hypothesized from orbital data [3]. This is supported by the detection of hydration features within the rock as well as the carbonate features are solely detected within the abrasion patch but not the rock’s surface. Organic preservation potential of abrasion patches: We incorporated the SHERLOC/WATSON results acquired from the Dourbes, Garde, and Quartier abrasion patches in the Séítah Fm to investigate the organomineral associations, and determine the biosignature preservation potential of these rocks. Dourbes is dominated by olivine and has minor amounts of carbonate, hydrated Ca-sulfate, and amorphous or microcrystalline silicate. Fluorescence features (330-340 nm) are detected in discrete locales and could be consistent with double ring aromatic organic molecules; yet, these features do not appear to be associated with an identified mineral phase. Dark subhedral to euhedral olivine grains within the Garde abrasion patch often co-occur with carbonate-consistent spectral signatures in all analyzed scans. The availability of Fe2+ is a known influence on olivine dissolution rates [1] and SuperCam estimates of the olivine composition (Forsterite-60 average for Sols 202-234) may thereby provide a constraint on the carbonation extent. Carbonated olivine phenocrysts within the matrix may be due to aqueous alteration, as the carbonation of nodules is consistent with observations in other hydrothermal systems and within Martian meteorites (ALH84001) [4]. In comparison, the Quartier abrasion patch represents an extensively altered endmember within the Bastide Member of the Séítah Fm. It contains a fluorescence doublet at 305/325 nm that coexists with multiple species of Na-sulfate and Mg-sulfate, Mg-carbonates, olivine [5]. Aqueous alteration and implications for habitability: The identification of primary and secondary mineral phases observed in the Bastide Member suggests the release of cations from primary ultramafic minerals through aqueous alteration. Within Garde, the carbonate detected appears to be Mg-rich and likely formed from the in situ alteration of Mg-rich olivine within the region as carbonate has only been detected within the rock via in situ analysis. Carbonates derived from abiotic and biotic reactions preserve biosignatures (i.e. indices of habitability) on Earth. The detected carbonate phase found in association with fluorescent features within the rock matrix may also indicate potential organic compounds preserved in a putative hydrothermal system. Fluorescent features (~330 nm) are unique to Garde and Dourbes, though they are co-located to carbonate signatures solely within Garde, and between the light toned minerals. Identification of these fluorescent features may be consistent with 1-2 ring aromatic compounds. The limit of detection for Raman is multiple orders of magnitude greater than the limit of detection required for fluorescence [6]. Implications for provenance: Hydrothermal systems represent disequilibrium chemical conditions that are hypothesized to have supported the emergence of life and also preserve ancient carbon within precipitated carbonates [7]. Hydrothermal system associated carbonates are capable of preserving biosignatures up to an estimated ~3.77 – 4.28 Gya [8]. Thus, carbonated olivine found within the Séítah Fm may represent a high-potential biosignature preserving environment on Mars. The formation of carbonates by an aqueous alteration process, such as carbonation of olivine is also consistent with hypotheses for carbonate within the greater regional-olivine bearing unit [2,3], which contains Garde, Dourbes, and Quartier. Acknowledgments: This work was carried out at the Jet Propulsion Laboratory, The California Institute of Technology under a contract from NASA. References: [1] Wood et al., (2019) ES&T, 6, 10. [2] Stack, K. et al., (2020) Space Sci Rev, 216, 127. [3] Tarnas, J. et al., (2021) JGR: Planets, 126, 11. [4] Steele et al., (2007) Meteorit. Planet. Sci., 42, 9. [5] Murphy, A.E. et al., (2022) LPSC [6] Bhartia et al., (2021) Space Sci Rev, 217, 58. [7] Luther (2021) GRL, 48, e2021GL094869. [8] Dodd et al., (2017) Nature, 543, 60-64

E L Cardarelli↗

A Mars Pathfinder landing on a recently drained ephemeral sea: Cerberus Plains, 6 deg N, 188 deg W

Along a 500 km-wide belt extending between 202 deg and 180 deg W and lying astride the martian equator, moderately low-albedo, uncratered smooth plains exhibit low thermal inertia and potentially favorable conditions for the preservation of near-surface ice. The Cerberus Plains occupy a topographic trough as much as 2 km below the planetary datum, and the denser atmosphere at these altitudes would also favor long residence times for near-surface ice once emplaced. The plains have previously been interpreted as the result of young (late Amazonian) low viscosity lava flows or similarly youthful fluvial deposition. However, the plains are also included in maps of possibly extensive martian paleoseas or paleolakes. Ice emplaced as such seas dissipated could still be preserved under thin (a few tens of centimeters) sedimentary cover. In any case, and if a sea once existed, aqueous-born interstitial cementation, probably including hydrated iron oxides and sulfate minerals, would have been favored and is now susceptible to investigation by the Pathfinder alpha proton x-ray spectrometer and multispectral imager.

Brakenridge, G. Robert↗

Subsurface Sampling and Sensing Using Burrowing Moles

Finding evidence for life on Mars will likely require accessing the subsurface since the Martian surface is both hostile to life and to preservation of biosignatures due to the cold dry conditions, the strong W environment, and the presence of strong oxidants. Systems are needed to probe beneath the sun and oxidant baked surface of Mars and return samples to the surface for analysis or to bring the instrument sensing underground. Recognizing this need, the European Space Agency incorporated a small subsurface penetrometer or Mole onto the Beagle 2 Mars lander. Had the 2003 landing been successful, the Mole would have collected samples from 1-1.5 m depth and delivered them to an organic analysis instrument on the surface. The de- vice called the Planetary Underground Tool (PLUTO), also measured soil mechanical and thermophysical properties. Constrained by the small mass and volume allowance of the Beagle lander, the PLUTO mole was a slender cylinder only 2 cm diameter and 28 cm long equipped with a small sampling device designed to collect samples and bring them to the surface for analysis by other instrument. The mass of the entire system including deployment mechanism and tether was 1/2 kg. sensor package underground to make in situ measurements. The Mars Underground Mole (MUM) is a larger Mole based on the PLUTO design but incorporating light collection optics that interface to a fiber optic cable in the tether that transmits light to a combined stimulated emission Raman Spectrometer and Short Wave Infrared (SWIR) reflectance Spectrometer with sensitivity from 0.7 to 2.5 micrometers. This instrument is called the Dual Spectral Sensor and uses a Digital Array Scanning Interferometer as the sensor technology, a type of fourier transform interferometer that uses fixed element prisms and thus is highly rugged compared to a Michaelson interferometer. Due to the size limitations of an on-Mole instrument compartment, and the availability of a tether, the sensor head, light sources, and control electronics for the instrument are on the surface. The DSS sensor is capable of sensing a wide range of minerals relevant to Mars Astrobiology objectives including hydrated minerals, clays, carbonates, sulfates, and ice. Additionally, Raman spectroscopy is effective for detecting organics. The MUM is designed to achieve a maximum depth of penetration of 5 m in Mars regolith and can be repeatedly deployed and retrieved. The ability to perform repeated sampling, combined with the low mass and power requirements, means that Moles could be incorporated into a rover mission as well as used on a stationary platform. The Mole mechanism is a pointed slender cylinder that advances into soil by way of an internal sliding hammer mechanism. Part of the energy released by the spring-loaded hammer with each shock is transferred to the Mole casing and from there to the soil, resulting in penetration by displacing and compressing the surrounding soil. A backwards-directed impulse as a re- action to each forward shock is transferred via a suppressor mass against a second weaker spring allowing forward motion without requiring reactive forces provided by the lander. The Mole tip can be opened to collect soil samples. The Mole casing is tethered to a supporting mechanism that supplies power. Components supporting the Mole on the surface include a launch tube, tether reel and winch for pulling in tether, in addition to the tether itself.

Stoker, C. R.↗

Don't Forget About... (Factoring in Everything for Successful Mars Exploration): In Situ Resource Utilization

Using In Situ Resources means reduced transportation requirements from Earth and a larger source of materials than might otherwise be available. Of the many in situ resources available on Mars, perhaps the most valuable is water. One facet of NASA's current Mars Exploration Program is a search for the locations and quantities of water in various forms: Subsurface liquid water aquafers; Surface and subsurface water ice and icy soils - Lineated Valley Fill (LVF), Lobate Debris Aprons (LDAs), Concentric Crater Fill (CCF); Hydrated minerals - Chlorides, Phyllosilicates, Sulfates, etc.; "Average regolith." Access to massive quantities of water could change surface mission concepts of operation and drive site selection. Availability of massive quantities of water could enable or change current assumptions for: Propellant manufacturing; Radiation protection;- "Relaxed" requirements for a closed loop ECLSS (Environmental Control and Life Support System); Crop growth; Improved crew amenities, such as more frequent showers and laundry.

ISRU↗

Acid Sulfate Alteration in Gusev Crater, Mars

The Mars Exploration Rover (MER) Spirit landed on the Gusev Crater plains west of the Columbia Hills in January, 2004, during the Martian summer (sol 0; sol = 1 Martian day = 24 hr 40 min). Spirit explored the Columbia Hills of Gusev Crater in the vicinity of Home Plate at the onset on its second winter (sol approximately 900) until the onset of its fourth winter (sol approximately 2170). At that time, Spirit became mired in a deposit of fined-grained and sulfate-rich soil with dust-covered solar panels and unfavorable pointing of the solar arrays toward the sun. Spirit has not communicated with the Earth since sol 2210 (January, 2011). Like its twin rover Opportunity, which landed on the opposite side of Mars at Meridiani Planum, Spirit has an Alpha Particle X-Ray Spectrometer (APXS) instrument for chemical analyses and a Moessbauer spectrometer (MB) for measurement of iron redox state, mineralogical speciation, and quantitative distribution among oxidation (Fe(3+)/sigma Fe) and coordination (octahedral versus tetrahedral) states and mineralogical speciation (e.g., olivine, pyroxene, ilmenite, carbonate, and sulfate). The concentration of SO3 in Gusev rocks and soils varies from approximately 1 to approximately 34 wt%. Because the APXS instrument does not detect low atomic number elements (e.g., H and C), major-element oxide concentrations are normalized to sum to 100 wt%, i.e., contributions of H2O, CO2, NO2, etc. to the bulk composition care not considered. The majority of Gusev samples have approximately 6 plus or minus 5 wt% SO3, but there is a group of samples with high SO3 concentrations (approximately 30 wt%) and high total iron concentrations (approximately 20 wt%). There is also a group with low total Fe and SO3 concentrations that is also characterized by high SiO2 concentrations (greater than 70 wt%). The trend labeled "Basaltic Soil" is interpreted as mixtures in variable proportions between unaltered igneous material and oxidized and SO3-rich basaltic dust. The Moessbauer parameters are not definitive for mineralogical speciation (other than octahedrally-coordinated Fe(3+) but are consistent with a schwertmannite-like phase (i.e., a nanophase ferric oxide). The high oxidation state and values of Moessbauer parameters (center shift and quadrupole splitting) for the high-SO3 samples imply ferric sulfate (i.e., oxidized sulfur), although the hydration state cannot be constrained. In no case is there an excess of SO3 over available cations (i.e., no evidence for elemental sulfur), and Fe sulfide (pyrite) has been detected in only one Gusev sample. The presence of both high-SiO2 (and low total iron and SO3) and high SO3 (and high total iron as ferric sulfate) can be accommodated by a two-step geochemical model developed with the Geochemist's Workbench. (1) Step 1 is anoxic acid sulfate leaching of Martian basalt at high water-to rock ratios (greater than 70). The result is a high-SiO2 residue0, and anoxic conditions are required to solubilize Fe as Fe(2+). (2) Step 2 is the oxic precipitation of sulfate salts from the leachate. Oxic conditions are required to produce the high concentrations of ferric sulfate with minor Mg-sulfates and no detectable Fe(2+)-sulfates.

Morris, R. V.↗

Crystal Water on Mars: Insights from the Mars Exploration Rovers

The purpose of this paper is to constrain the total water contents from crystal H2O and OH in several materials analyzed by the Mars Exploration Rovers (MER). Crystal H2O is part of the unit cell and cannot be removed without changing the structure. Minerals that contain only OH in their structures are anhydrous minerals containing hydroxyls, although they are formed as a product of aqueous activity and will decompose with evolution of H2O when heated. The crystal water and OH contents of a bulk material at the MER landing sites can be estimated from mineralogical composition, which is determined by a combination of Fe-mineralogy obtained by the Mossbauer Spectrometer and mineral abundances based upon the chemical composition determined by the Alpha Particle X-ray Spectrometer. Jarosite, along with Ca- and Mg-sulfates, have been suggested as the sulfur-bearing phases in Meridiani Planum outcrop. Models of various hydration states of Fe-, Ca-, and Mg-sulfates and other possible secondary phases suggest that 6 to 22 wt.% of the outcrop may occur as crystal H2O and/or OH (Clark et al., 2005). This estimate of water is consistent with measurements from the Odyssey orbiter, where 7 % H2O-equivalent H was measured down to a depth of approximately 1 m for the region (Feldman et al., 2004).

Ming, D. W.↗

Simulating Sulfate Aerosol Size in the Hunga Tonga Plume: Comparisons with Observations

Using the NASA GEOS Chemistry Climate Model (CCM) coupled to a detailed sectional aerosol microphysical model, we have simulated the January 2022 Hunga Tonga-Hunga Ha’apai (HTHH) plume. We have developed a version of the Global Modeling Initiative (GMI) chemistry mechanism to include the requisite sulfur chemistry and coupled it to the Community Aerosol and Radiation Model for Atmospheres (CARMA) sectional aerosol microphysics within the GEOS CCM. Our simulations focus on the lifecycle of stratospheric sulfur injected by the eruption–from the oxidation of the injected sulfur dioxide to the nucleation, growth, coagulation, hydration, and eventual settling of the volcanic sulfate aerosol particles. In order to constrain the simulated microphysics, we focus on comparing our model to observations with aerosol size information, namely in-situ particle counter observations and multi-wavelength satellite observations from OMPS-LP and SAGE-III. This eruption provides an interesting test case for our model; both the modeled gas-phase chemistry as well as the modeled aerosol microphysics are perturbed by the massive injection of water that accompanied the primary sulfur emissions from the eruption.

aerosols↗

Performing Mineral Hydration Experiments in the CheMin Diffractometer on Mars

Laboratory work is the cornerstone of experimental planetary geochemistry, mineralogy, and petrology, but much is to be gained by "experiments" while on a planet surface. Earth-bound experiments are often limited in ability to control multiple conditions relevant to planetary bodies (e.g. cycles in temperature and vapor pressure of water), but observations on-planet provide a unique opportunity where conditions are native to the planet and those affected by sampling and analysis can be constrained. The CheMin XRD instrument on Mars Science Laboratory has been able to test mineral hydration in samples held for up to 300 Mars days (sols). Clay minerals sampled at Yellowknife Bay early in the mission had both collapsed (10 Å) and expanded (13.2 Å) basal spacing. Collapsed interlayers were expected, but larger spacing was not; it was uncertain whether larger basal spacing would collapse on prolonged exposure to warmer conditions inside CheMin. Observation over several hundred sols showed no collapse, with the conclusion that expanded interlayer spacing was due to partial intercalation by metal-hydroxyl groups that resist dehydration. More recently, a sample of the Murray Formation, Oudam, provided the first XRD detection of gypsum and a chance to observe gypsum stability. Laboratory work suggests gypsum should be stable at Mars surface conditions, and indeed gypsum has been observed from orbit at higher latitudes and in thick veins at Yellowknife Bay by Mastcam reflectance spectra. Laboratory experiments have shown that on dehydration the gypsum would not become X-ray amorphous but would rather transform to a water-deficient bassanite structure. Over a period of 37 sols, it was observed that the Oudam sample in CheMin transformed from an assemblage of gypsum+anhydrite, to gypsum+bassanite+anhydrite, and finally to bassanite+anhydrite. Mg-sulfates were also anticipated but have not been observed in CheMin despite chemical evidence for their presence. Unlike gypsum, hydrated Mg-sulfates can transition to an X-ray amorphous form. Crystalline Mg-sulfates are expected higher in the section on Mount Sharp, where it should be possible to determine whether they persist or are destabilized after sampling, providing further insight into hydrous mineral stability at Mars near-equatorial conditions.

Vaniman, D. T.↗

Wavelength calibration techniques and subtle surface and atmospheric absorption features in the Mariner 6, 7 IRS reflectance data

1994 marks the 25th anniversary of the Mariner 6 and 7 flyby missions to Mars. Despite its age, the Mariner 6,7 Infrared Spectrometer (IRS) data are a unique set of measurements that can provide important information about the Martian surface, atmospheric, and atmospheric aerosol composition. For certain mid-IR wavelengths, the IRS spectra are the only such spacecraft data obtained for Mars. At other wavelengths, IRS measured surface regions different from those measured by Mariner 9 or Phobos 2 and under different dust opacity conditions. We are interested in examining the IRS reflectance data in the 1.8 to 3.0 micron region because there are numerous diagnostic absorption features at these wavelengths that could be indicative of hydrated silicate minerals or of carbonate- or sulfate-bearing minerals. Groundbased telescopic data and recent Phobos ISM measurements have provided controversial and somewhat contradictory evidence for the existence of mineralogic absorption features at these wavelengths. Our goal is to determine whether any such features can be seen in the IRS data and to use their presence or absence to re-assess the quality and interpretations of previous telescopic and spacecraft measurements.

Bell, James F., III↗

Near-Infrared Hyperspectral Image Cubes of Mars during the 1999 Opposition

We used the Goddard Space Flight Center, Acousto-Optic Tunable Filter (AOTF) Camera to obtain near-IR spectral image sets of Mars over the 1.6-3.6 micron region during the April 1999 opposition. A complete image set consists of 280 images with a spectral full-width-half maximum of 10 wavenumbers (fixed in frequency), 90 images in H-band (1.55-1.80 micron), 115 images in K-band (1.95-2.50 micron) and 75 images in L-band (2.90-3.70 micron). The short-wavelength limit is set by transmission of AOTF cell and long-wavelength limit is imposed by sensitivity of PICNIC, 256x256, HgCdTe array detector. We will discuss the new array performance and provide preliminary interpretations of some of these results. These measurements were part of a 4-observatory coordinated effort whose overall objective was to assemble a photometrically calibrated, spectrally complete ground-based image cube over the visible and near-IR spectral region. To accomplish this, four observing teams conducted the investigations with instruments spanning 0.4 to 5.0 micron. The instruments and observing facilities were (a) AOTF camera at Apache Point Observatory, 3.5m, f/10, Nasymth focus (this abstract). Primary science targets included the 3 micron water-of hydration feature and CO2, H2O ice (polar regions and clouds); (b) Visible/NIR interference-filter (24 filters) camera at Lowell Observatory, 72" telescope. 430-1050 nm. Science targets were Fe(2+), Fe(3+) mineralogy and coarse grain hematite search; (c) NMSU Tortugas Mountain Observatory, 60 cm telescope, CCD photometry with same filter set as Lowell; (d) KPNO cryogenic grating/slit spectrometer (CRSP/SALLY) at KPNO 2.1 m, f/15 Cassegrain focus (see abstract by D. Glenar, et. al., this meeting). Selected wavelengths in 3-5 micron region (L, M band). Science targets included water-of-hydration feature (3-4 micron long wave extension) and sulfate mineralogy. Observers participating in this campaign included Dave Glenar, John Hillman, Gordon Bjoraker and Fred Espenak from GSFC, Nancy Chanover, Jim Murphy and A. S. MurTell from NMSU, Leslie Young from BU, Diana Blaney from JPL and Dick Joyce from KPNO.

Hillman, John J.↗

Crustal structure and igneous processes in a chondritic Io

Liquid sulfur can form when metal-free C1 or C2 chondrites are heated. It may be obtained either by direct melting of native sulfur in disequilibrated C1 or C2 chondrites or by incongruent melting of pyrite and other sulfides in thermodynamically equilibrated rocks of the same composition. Hence, Lewis considered C2 chondrites to be the best meteoritic analog for Io's bulk composition. Metal-bearing C3 and ordinary chondrites are too chemically reduced to yield liquid sulfur and are not thought to represent plausible analogs of Io's bulk composition. An important aspect of Lewis' work is that CaSO4 and MgSO4 are predicted to be important in Io. Real C1 and C2 chondrites contain averages of, respectively, 11 percent and 3 percent by mass of salts (plus water of hydration). The most abundant chondritic salts are magnesium and calcium sulfates, but other important components include sulfates of sodium, potassium, and nickel and carbonates of magnesium, calcium, and iron. It is widely accepted that chondritic salts are formed by low-temperature aqueous alteration. Even if Io originally did not contain salts, it is likely that aqueous alteration would have yielded several percent sulfates and carbonates. In any event, Io probably contains sulfates and carbonates. This report presents the results of a model of differentiation of a simplified C2 chondrite-like composition that includes 1.92 percent MgSO4, 0.56 percent CaSO4, 0.53 percent CaCO3, and 0.094 percent elemental sulfur. The temperature of the model is gradually increased; ensuing fractional melting results in these components extruding or intruding at gravitationally stable levels in Io's crust. Relevant phase equilibria were reviewed. A deficiency of high-pressure phase equilibria renders the present model qualitative.

Kargel, J. S.↗