Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

High efficiency, high-current laser-driven electron injector (CRADA Final Report)

Owing to ultra-high fields sustainable in a plasma, laser-plasma accelerator technology enables compact, high-brightness, sources of electron beams. This work investigates novel electron injection methods. Key to this research is to understand laser energy and pointing stability and to develop methods and techniques to control fluctuations. This project benefits other areas of scientific inquiry by developing a high-repetition rate, high-brightness electron source for probing materials and ultra-fast processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-efficiency, high-output-power antiguide laser diode arrays

Antiguide laser arrays have been fabricated and operated up to peak pulsed powers of 7.7 W in a beam with a full-width at half-maximum in the main lobe of 0.7 deg. Up to 0.7 W of continuous wave power is emitted into a radiation pattern 2.5 times the diffraction limit. By varying the temperature of the array to vary the operating wavelength of the device, the threshold gain condition of the array modes is altered, allowing thermal tuning of the far field of the device.

Mehuys, D.↗

High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells

Three-dimensional organic–inorganic perovskites have emerged as one of the most promising thin-film solar cell materials owing to their remarkable photophysical properties, which have led to power conversion efficiencies exceeding 20 per cent, with the prospect of further improvements towards the Shockley– Queisser limit for a single-junction solar cell (33.5 per cent). Besides efficiency, another critical factor for photovoltaics and other optoelectronic applications is environmental stability and photostability under operating conditions. In contrast to their three-dimensional counterparts, Ruddlesden–Popper phases—layered two-dimensional perovskite films—have shown promising stability, but poor efficiency at only 4.73 per cent. This relatively poor efficiency is attributed to the inhibition of out-of-plane charge transport by the organic cations, which act like insulating spacing layers between the conducting inorganic slabs. Here we overcome this issue in layered perovskites by producing thin films of near-single-crystalline quality, in which the crystallographic planes of the inorganic perovskite component have a strongly preferential out-of-plane alignment with respect to the contacts in planar solar cells to facilitate efficient charge transport. We report a photovoltaic efficiency of 12.52 per cent with no hysteresis, and the devices exhibit greatly improved stability in comparison to their three-dimensional counterparts when subjected to light, humidity and heat stress tests. Unencapsulated two-dimensional perovskite devices retain over 60 per cent of their efficiency for over 2,250 hours under constant, standard (AM1.5G) illumination, and exhibit greater tolerance to 65 per cent relative humidity than do three-dimensional equivalents. When the devices are encapsulated, the layered devices do not show any degradation under constant AM1.5G illumination or humidity. Finally, we anticipate that these results will lead to the growth of single-crystalline, solution-processed, layered, hybrid, perovskite thin films, which are essential for high performance opto-electronic devices with technologically relevant long-term stability.

14 SOLAR ENERGY↗

High-efficiency, flexible CdTe solar cells on ultra-thin glass substrates

Flexible, high-efficiency, low-cost solar cells can enable applications that take advantage of high specific power, flexible form factors, lower installation and transportation costs. Here, we report a certified record efficiency of 16.4% for a flexible CdTe solar cell that is a marked improvement over the previous standard (14.05%). The improvement was achieved by replacing chemical-bath-deposited CdS with sputtered CdS:O and also replacing the high-temperature sputtered ZnTe:Cu back contact layer with co-evaporated and rapidly annealed ZnTe:Cu. We use quantum efficiency and capacitance-voltage measurements combined with device simulations to identify the reasons for the increase in efficiency. Both device simulations and experimental results show that higher carrier density can quantitatively account for the increased open circuit voltage (V{sub OC}) and Fill Factor (FF), and likewise, the increase in short circuit current density (J{sub SC}) can be attributed to the more transparent CdS:O.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗

Remnant PbI{sub 2}, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?

Perovskite-containing solar cells were fabricated in a two-step procedure in which PbI{sub 2} is deposited via spin-coating and subsequently converted to the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite by dipping in a solution of CH{sub 3}NH{sub 3}I. By varying the dipping time from 5 s to 2 h, we observe that the device performance shows an unexpectedly remarkable trend. At dipping times below 15 min the current density and voltage of the device are enhanced from 10.1 mA/cm{sup 2} and 933 mV (5 s) to 15.1 mA/cm{sup 2} and 1036 mV (15 min). However, upon further conversion, the current density decreases to 9.7 mA/cm{sup 2} and 846 mV after 2 h. Based on X-ray diffraction data, we determined that remnant PbI{sub 2} is always present in these devices. Work function and dark current measurements showed that the remnant PbI{sub 2} has a beneficial effect and acts as a blocking layer between the TiO{sub 2} semiconductor and the perovskite itself reducing the probability of back electron transfer (charge recombination). Furthermore, we find that increased dipping time leads to an increase in the size of perovskite crystals at the perovskite-hole-transporting material interface. Overall, approximately 15 min dipping time (∼2% unconverted PbI{sub 2}) is necessary for achieving optimal device efficiency.

36 MATERIALS SCIENCE↗