Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hidden”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Energy Analysis Method for Hidden Damage Detection

A method of detecting internal defects in composites or other multilayer materials includes generating a wavefield on a surface of the material. Wavefield data is collected from the wavefield on the surface, and the measured wavefield data is processed to provide measured energy data. The method may include generating simulated or predicted energy data for the multilayer material that is compared to the simulated energy data to determine if the multilayer material has internal defects or damage below the surface. The method can be utilized to detect and/or quantify damage or other defects that are "hidden" by damage that is closer to the surface of the material.

Campbell Leckey, Cara A.↗

Search for Gravitational Waves From Scorpius X-1 in the Second Advanced LIGO Observing Run With an Improved Hidden Markov Model

We present results from a semi coherent search for continuous gravitational waves from the low-mass x-ray binary Scorpius X-1, using a hidden Markov model (HMM) to track spin wandering. This search improves on previous HMM-based searches of LIGO data by using an improved frequency domain matched filter, the J-statistic, and by analyzing data from Advanced LIGO’s second observing run. In the frequency range searched, from 60 to 650 Hz, we find no evidence of gravitational radiation. At 194.6 Hz, the most sensitive search frequency, we report an upper limit on gravitational wave strain (at 95% confidence) ofh95%0¼3.47×10−25when marginalizing over source inclination angle. This is the most sensitive search for Scorpius X-1, to date, that is specifically designed to be robust in the presence of spin wandering.

B P Abbott↗

Model Checking as a Service: Towards Pragmatic Hidden Formal Methods

Executable models can be used to support all engineering activities in Model-Based Systems Engineering. Testing and simulation of such models can provide early feedback about design choices. How-ever, in today’s complex systems failures could arise due to subtle errors that are hard to find without checking all possible execution paths. Formal methods, and especially model checking can uncover such subtle errors, yet their usage in practice is limited due to the specialized expertise and high computing power required. There-fore we created an automated, cloud-based environment that can verify complex reachability properties on SysML State Machines using hidden model checkers. The approach and the prototype is illustrated using an example from the aerospace domain.

Karban, Robert↗

Solar Active Region Coronal Jets: Hidden-onset Jets

Solar quiet- and coronal-hole region coronal jets frequently clearly originate from erupting minifilaments, but active-region jets often lack an obvious erupting-minifilament source. We observe a coronal-jet-productive active region (AR), AR12824, over 2021 May 22 0–8 UT, primarily using Solar Dynamics Observatory (SDO) Atmospheric Imaging Array (AIA) EUV images and SDO/Helioseismic and Magnetic Imager magnetograms. Jets were concentrated in two locations in the AR: on the south side and on the northwest side of the AR’s lone large sunspot. The south-location jets are oriented so that we have a clear view of the jets’ origin low in the atmosphere: their source is clearly minifilaments erupting from locations showing magnetic flux changes/cancelations. After erupting a projected distance ~5ʹʹ away from their origin site, the minifilaments erupt outward onto far-reaching field as part of the jet’s spire, quickly losing their minifilament character. In contrast, the northwest-location jets show no clear erupting minifilament, but the source site of those jets are obscured along our line of sight by absorbing chromospheric material. EUV and magnetic data indicate that the likely source sites were ~15ʹʹ from where the we first see the jet spire; thus, an erupting minifilament would likely lose its minifilament character before we first see the spire. We conclude that such AR jets could work like non-AR jets, but the erupting-minifilament jet source is often hidden by obscuring material. Another factor is that magnetic eruptions making some AR jets carry only a harder-to-detect comparatively thin (∼1ʹʹ–2ʹʹ) minifilament “strand.” A full report appears in Sterling, Moore, & Panesar (2024, ApJ, 960, 109).

Alphonse C. Sterling↗

Detecting Volcanic Co2 Emissions Hidden in Tropical Volcanic Forests Using Fixed-Wing sUAS

CO2 emissions are among the earliest indicators of subsurface state change and reactivation of volcanic systems and these deep signals reflect in faint diffuse emissions variations on volcanic flanks. Monitoring vast areas of rainforests covering tropical volcanoes is challenging, and space-borne sensors like OCO-2 are not sensitive enough. Fortunately, trees exposed to mild enhancements of CO2 may experience fertilization and build excess CO2 into excess biomass (Cawse-Nicholson, et al. 2018, Biogeosciences). They also process excess CO2 through photosynthesis, measurable by fluorescence (Bogue et al., 2019, Biogeosciences). Furthermore, spaceborne remote sensing instruments have demonstrated increasing NDVI months to years before eruptions, unexplained by other factors (e.g., Houlie et al. 2006, EPSL; Seiler et al. 2017, PLoS One). By providing a means to map large areas of above-canopy CO2 variations over tropical rainforest on the flanks of actively degassing volcanoes, we enable to interpret the signals plants provide in response to excess CO2 with airborne and spaceborne hyperspectral remote sensing methods, including a possible future Surface Biology and Geology (SBG) NASA satellite mission.As a critical step to mature and test this concept, we deployed small unmanned aerial systems (sUAS) using a fixed-wing sUAS designed for autonomous operations and long endurance in extreme environments, without causing significant disturbance of the sampled air. We integrated an in-situ sensor to record the CO2 enhancement field above the forest canopy. Test flight results on the flanks of Turrialba volcano in Costa Rica above forest canopies covering known moderate gas seeps demonstrate the sUAS-borne detection and mapping capabilities of above-canopy elevated CO2 gradients. The strong detection capabilities and high detector signal stability resulted from key system design elements including RF shielding, mechanical stabilization, and calibration procedures. This highly robust system is readily applied for diffuse volcanic CO2 emission studies on active volcanoes covered by dense vegetation.

Volcanic↗

A general solution to the hidden-line problem

The requirements for computer-generated perspective projections of three dimensional objects has escalated. A general solution was developed. The theoretical solution to this problem is presented. The method is very efficient as it minimizes the selection of points and comparison of line segments and hence avoids the devastation of square-law growth.

Hedgley, D. R., Jr.↗

Hidden-Line Computer Code

New, efficient solution minimizes run time. Approach based on approved theorem provides formal basis for assuring generality and rapid execution. Theorem does not directly address nuisance of square law growth. Analysis of algorithm shows it tends to avoid square-law growth, and rigorous testing verified algorithm tends to enjoy almost linear growth.

Hedgley, D. R., Jr.↗

Repairing Hidden Cracks in Coolant Tubes

Repair technique closes leaks in tubes or conduits where access limited to wall opposite crack. Technique applicable to any tubular assembly where tubes bundled together or bonded to supporting shell, such as in heat exchangers. Procedure provides structural support to area failed and uninterrupted flow without significantly altering heat-transfer profile.

Mills, R. C., Sr.↗

Detection of hidden mineral deposits by airborne spectral analysis of forest canopies

Data from field surveys and biogeochemical tests conducted in Maine, Montana, and Washington strongly correlate with results obtained using high resolution airborne spectroradiometer which detects an anomalous spectral waveform that appears definitely associated with sulfide mineralization. The spectral region most affected by mineral stress is between 550 nm and 750 nm. Spectral variations observed in the field occur on the wings of the red chlorophyll band centered at about 690 nm. The metal-stress-induced variations on the absorption band wing are most successfully resolved in the high spectral resolution field data using a waveform analysis technique. The development of chlorophyll pigments was retarded in greenhouse plants doped with copper and zinc in the laboratory. The lowered chlorophyll production resulted in changes on the wings of the chlorophyll bands of reflectance spectra of the plants. The airborne spectroradiometer system and waveform analysis remains the most sensitive technique for biogeochemical surveys.

Collins, W.↗

Method of repairing hidden leaks in tubes

A method of repairing a tubular assembly in which access to a defect in the tube is limited includes the steps of cutting an opening in the tube on the side opposite the defect so as to expose the defect from the inside of the tube. A tubular insert is inserted into the tube to cover the defect and is secured in place by means of brazing or welding. The remaining space between the opening and insert is closed by means of close-out patches which are welded or brazed to both the insert and the tube. The result is a permanent repair having great structural integrity.

Duesberg, J. D.↗

Hidden carbon dioxide on Mars

A recent proposal that much of the outgassed CO2 on Mars is tied up in the planet's crust in the form of carbonate mineral is discussed. According to this hypothesis, carbonate formation on Mars continued after open bodies of liquid water became unstable. A consequence of the hypothesis is that, in the absence of a recycling mechanism for CO2, the surface pressure on Mars will monotonically decrease until it reaches the minimum atmospheric overburden pressure required for liquid water to form. The theory explains Mars' low surface pressure, and also implies that the climate of Mars has evolved linearly over geologic time, rather than cyclically.

Haberle, R. M.↗

Hidden impact damage in thick composites

NASA is developing light-weight graphite/epoxy filament-wound cases (FWC) for the solid rocket motors of the Space Shuttle. The 12-foot-diameter FWC's are about 1.4 inches or more thick. Tests were conducted to determine the tension strength of an FWC after low-velocity impact. Impactors of various kinetic energies, masses, and shapes were used. The conditions that give minimum visual evidence of damage were emphasized. The capability to characterize impact damage with radiography and ultrasonic attenuation was also evaluated. After impact, the specimens were loaded uniaxially in tension to determine residual strengths.

Poe, C. C., Jr.↗

Are high-redshift quasars hidden by dusty galaxies?

A Monte Carlo technique has been developed to compute the joint probability distribution for the reddening and extinction of quasars by galaxies along the line of sight with a realistic dust extinction curve including the 220 nm feature. Galaxies are treated as disks with random inclinations, having exponential or modified Gaussian radial profiles. This technique is used to find the distribution of the reddened quasars on multicolor diagrams such as the (U-J, J-F) plots used by Koo and Kron (1982) to find faint quasars. The multicolor search technique is not a simple UV excess approach, and the resulting color selection does not add significantly to the flux selection discussed by Wright (1981), Ostriker and Heisler (1984), and Heisler and Ostriker (1988). The quasar reddening trend observed by Wright and Malkan (1987) is about 0.35 + or - 0.50 times the mean reddening of the selected sample predicted by the Heisler and Ostriker model.

Wright, Edward L.↗

Triple galaxies and a hidden mass problem

The authors consider a homogeneous sample of 84 triple systems of galaxies with components brighter than m = 15.7, located in the northern sky and satisfying an isolation criterion with respect to neighboring galaxies in projection. The distributions of basic dynamical parameters for triplets have median values as follows: radial velocity dispersion 133 km/s, mean harmonic radius 63 kpc, absolute magnitude of galaxies M sub B equals -20.38, crossing time tau = 0.04 H(sup minus 1). For different ways of estimation the median mass-to-luminosity ratio is (20 - 30). A comparison of the last value with the ones for single and binary galaxies shows the presence of a virial mass excess for triplets by a factor 4. The mass-to-luminosity ratio is practically uncorrelated with linear size of triplets or with morphological types of their components. We note that a significant part of the virial excess may be explained by the presence of nonisolated triple configurations in the sample, which are produced by debris of more populous groups of galaxies.

Karachentsev, I. D.↗