Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heating capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Heat capacity and thermodynamic functions of transition metal ion (Cu 2+ , Fe 2+ , Mn 2+ ) exchanged, partially dehydrated zeolite $\mathrm{A}$ ($\mathrm{LTA}$)

Here we have measured the heat capacity from 1.8 to 300 K of partially dehydrated zeolite A (LTA), fully exchanged with Cu 2+ , Fe 2+ , and Mn 2+ ions. The samples have a broad excess heat capacity contribution centered around 4 K, which we attribute to local electric fields splitting the magnetic moments of the cations. The excess heat capacity is modelled using a sum of several Schottky anomalies. From these models, we conclude that the cations in the Cu 2+ zeolite reside in at least four distinct coordination environments, and that some of the coordination environments in all three zeolites are highly asymmetric. We also report theoretical fits of the heat capacity data, and values of the standard thermodynamic functions C P,m , Δ 0K T S m ° , Δ 0K T H m ° , and Φ m ° at smooth temperatures. The standard molar entropies at 298.15 K are 71.8 J·K -1 ·mol -1 for Cu-zeolite A (Cu 0.22 Al 0.49 Si 0.51 O 2 1.04 H 2 O), 71.1 J·K -1 ·mol -1 for Fe-zeolite A (Na 0.01 Fe 0.23 Al 0.50 Si 0.51 O 2 ∙0.77 H 2 O), and 66.0 J·K -1 ·mol -1 for Mn-zeolite A (Mn 0.26 Al 0.49 Si 0.50 O 2 ∙0.53 H 2 O).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the heat capacity of Ce{sub 3}Al

Electrical resistivity and heat capacity measurements on Cerium based dense Kondo compound Ce{sub 3}Al have been reported. Clear signatures of first order structural transition at 108K, followed by a Kondo minimum and coherence are clearly seen in resistivity. The structural transition is robust and is not affected by magnetic fields. Heat capacity measurements reveal an anomalous enhancement in the heavy fermion character upon magnetic fields. Vollhardt invariance in specific heat C(T.H) curves have been observed at T=3.7K and at H ≈ 6T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Paramagnon heat capacity in (Ti,Zr,Hf)NiFe x NiSn half-Heusler composites

As a measure of the temperature response of the energy of matter, the heat capacity $C_p$ is a fundamental thermodynamic property. Its dependence on magnetic field, especially at low temperatures, yields insight into the electronic, phononic, and magnetic states of condensed matter. Here, we present a set of paramagnetic and ferromagnetic (Ti, Zr, Hf)NiFe x Sn half-Heusler composites that exhibit low-field (<3 T) maxima in $C_p$ and higher-field magnetic quenching of the heat capacity at temperatures below 10 K. Using rigorous statistical analysis, we attribute the effect to the existence of paramagnons within the compounds. To explain the lowest-temperature (<4 K), low-field declines in $C_p$, we derive a magnon model up to fourth order in dispersion. While the combined paramagnon and magnon model matches the data well, the fit parameters are significantly underdetermined. Further, we provide a qualitative explanation of the secondary effect based on superconducting phases within the composites. Overall, our work highlights the insight of field-dependent heat capacity studies at fixed temperatures that cannot be as easily gleaned from the temperature-dependent heat capacity at fixed magnetic fields.

36 MATERIALS SCIENCE↗

Accurate Measurement of Heat Capacity by Differential Scanning Calorimetry

Experience with high quality heat capacity measurement by differential scanning calorimetry is summarized and illustrated, pointing out three major causes of error: (1) incompatible thermal histories of the sample, reference and blank runs; (2) unstable initial and final isotherms; (3) incompatible differences between initial and final isotherm amplitudes for sample, reference and blank runs. Considering these problems, it is shown for the case of polyoxymethylene that accuracies in heat capacity of 0.1 percent may be possible.

Source record↗

Heat Capacity and Mössbauer Study of Self-Flux Grown FeTe Single Crystal

We report mainly the heat capacity and Mössbauer study of self-flux grown FeTe single crystal, which is a ground state compound of the Fe chalcogenides superconducting series i.e. FeTe{sub 1−x}(Se/S){sub x} The as grown FeTe single crystal is large enough to the tune of a few centimetres and the same crystallizes in tetragonal structure having space group of P4/nmm. FeTe shows the structural/magnetic phase transition at 70 K in both magnetic and resistivity measurements. Heat capacity measurement also confirms the coupled structural/magnetic transition at the same temperature. The Debye model fitting of low temperature (below 70 K) heat capacity exhibited Debye temperature (𝜃{sub D}) to be 324 K. Mössbauer spectra are performed at 300 and 5 K. The 300-K spectra showed two paramagnetic doublets and the 5-K spectra exhibited hyperfine magnetic sextet with an average hyperfine field of 10.6 Tesla matching with the results of Yoshikazu Mizuguchi et al.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thin film nanocalorimeter for heat capacity measurements of 30 nm films

A silicon nitride membrane-based nanocalorimeter is described for measuring the heat capacity of 30 nm films from 300 mK to 800 K and in high magnetic fields with absolute accuracy &sim;2%. The addenda heat capacity of the nanocalorimeter is less than 2 × 10 -7 J/K at room temperature and 2 × 10 -10 J/K at 2.3 K. This is more than ten times smaller than any existing calorimeter suitable for measuring thin films over this wide temperature range. The heat capacities of thin Cu and Au films are reported and agree with bulk values. The thermal conductivity of the thin low stress silicon nitride is substantially smaller than thicker membranes while the specific heat is enhanced below 20 K. Lastly, design of the nanocalorimeter will be discussed along with fabrication details and calibration results.

47 OTHER INSTRUMENTATION↗

Observation of low heat capacities for vapor-deposited glasses of indomethacin as determined by AC nanocalorimetry

Highly stable glass films of indomethacin (IMC) with thicknesses ranging from 75 to 2900 nm were prepared by physical vapor deposition. Alternating current (AC) nanocalorimetry was used to evaluate the heat capacity and kinetic stability of the glasses as a function of thickness. Glasses deposited at a substrate temperature of 0.84T{sub g} displayed heat capacities that were approximately 19 J/(mol K) (4.5%) lower than glasses deposited at T{sub g} (315 K) or the ordinary glass prepared by cooling the liquid. This difference in heat capacity was observed over the entire thickness range and is significantly larger than the {approx}2 J/(mol K) (0.3%) difference previously observed between aged and ordinary glasses. The vapor-deposited glasses were isothermally transformed into the supercooled liquid above T{sub g}. Glasses with low heat capacities exhibited high kinetic stability. The transformation time increased by an order of magnitude as the film thickness increased from 75 to 600 nm and was independent of film thickness for the thickest films. We interpret these results to indicate that the transformation of stable glass into supercooled liquid can occur by either a surface-initiated or bulk mechanism. In these experiments, the structural relaxation time of the IMC supercooled liquid was observed to be nearly independent of sample thickness.

36 MATERIALS SCIENCE↗

Heat capacity and thermodynamic functions of partially dehydrated cation-exchanged (Na + , Cs + , Cd 2+ , Li + , and NH 4 + ) $\mathrm{RHO}$ zeolites

Synthetic zeolites have a myriad of applications in industry due to their porous frameworks, potential to exhibit flexibility, and specific interactions with guest molecules. One topology of zeolites, RHO, is known to be flexible and have strong interactions with both H 2 O and CO 2 . Here we have performed heat capacity measurements on three partially dehydrated zeolite RHO samples containing extra-framework cations Na + and Cs + , Cd 2+ and Cs + , and Li + and NH 4 + to understand the energetics of these materials. Based on fits of the heat capacity data, we report smooth thermodynamic functions of C p,m , Δ T 0 S m °, Δ T 0 H m °, and Φ m ° for these samples. The standard S m ° at 298.15 K are 76.3 ± 0.8, 72.1 ± 0.8, and 68.8 ± 0.7 J∙K -1 ∙mol -1 for the Na,Cs RHO, Cd,Cs RHO, and Li,NH 4 RHO samples, respectively, and the standard H m ° at 298.15 K are 12.1 ± 0.1, 11.4 ± 0.1, and 11.4 ± 0.1 kJ∙mol -1 . Our measurements also show a transition in the heat capacity of Na,Cs RHO, the sample with the highest water content, between 180 and 300 K that is not clearly observed in the other two samples. We attribute this transition to labile water and cations in the framework. This movement could also be coupled with a temperature-induced lattice expansion. Future work will include heat capacity measurements on fully dehydrated and fully hydrated zeolite RHO in order to separate these two possible phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, magnetization, and heat capacity of triangular lattice materials NaErSe 2 and KErSe 2

In this paper we report the synthesis, magnetization, and heat capacity of the frustrated magnets A ErSe 2 ( A = Na , K ) which contain perfect triangular lattices of Er 3 + . The magnetization data suggests no long-range magnetic order exists in A ErSe 2 ( A = Na , K ), which is consistent with the heat capacity measurements. Large anisotropy is observed between the magnetization within the a b plane and along the c axis of both compounds. When the magnetic field is applied along the a b plane, anomalies are observed at 1.8 μ B in NaErSe 2 at 0.2 T and 2.1 μ B in KErSe 2 at 0.18 T. Unlike NaErSe 2 , a plateaulike field-induced metamagnetic transition is observed for H ∥ c below 1 K in KErSe 2 . Two broad peaks are observed in the heat capacity below 10 K indicating possible crystal electric field (CEF) effects and magnetic entropy released under different magnetic fields. All results indicate that A ErSe 2 are strongly anisotropic, frustrated magnets with field-induced transition at low temperature. The lack of signatures for long-range magnetic order implies that these materials are candidates for hosting a quantum spin liquid ground state.

36 MATERIALS SCIENCE↗

Data use investigations for applications Explorer Mission A (Heat Capacity Mapping Mission): HCMM's role in studies of the urban heat island, Great Lakes thermal phenomena and radiometric calibration of satellite data

The utility of data from NASA'a heat capacity mapping mission satellite for studies of the urban heat island, thermal phenomena in large lakes and radiometric calibration of satellite sensors was assessed. The data were found to be of significant value in all cases. Using HCMM data, the existence and microstructure of the heat island can be observed and associated with land cover within the urban complex. The formation and development of the thermal bar in the Great Lakes can be observed and quantitatively mapped using HCMM data. In addition, the thermal patterns observed can be associated with water quality variations observed both from other remote sensing platforms and in situ. The imaging radiometer on-board the HCMM satellite is shown to be calibratible to within about 1.1 C of actual surface temperatures. These findings, as well as the analytical procedures used in studying the HCMM data, are included.

Schott, J. R.↗

Influence of the lanthanum deficit on electrical resistivity and heat capacity of silver-doped lanthanum manganites La{sub 1-x}Ag{sub y}MnO{sub 3}

The electrical resistivity and heat capacity of the silver-doped lanthanum manganites La{sub 0.80}Ag{sub 0.15}MnO{sub 3} and La{sub 0.85}Ag{sub 0.15}MnO{sub 3} have been investigated. Despite the nonstoichiometry of the composition, the La{sub 0.80}Ag{sub 0.15}MnO{sub 3} manganite exhibits a bulk homogeneity and better physical properties from the applied point of view as compared to the La{sub 0.85}Ag{sub 0.15}MnO{sub 3} manganite, viz., the former compound has a higher spontaneous magnetoresistance and a larger jump of the heat capacity with a small width of the phase transition, and the anomalies of the heat capacity and electrical resistivity in the vicinity of the Curie point of this compound agree with the fluctuation nature of the second-order phase transition. The behavior of the properties of lanthanum-deficient manganites under investigation in the region of the phase transition is consistent with the classical theory of indirect exchange interaction. The behavior of the temperature dependence of the electrical resistivity has been analyzed in terms of two models. One of these models is based on the tunneling of charge carriers between ferrons or polarons, and the other model is based on the polaron hopping conduction. Both approaches lead to consistent results, and their combination has made it possible to estimate the tunneling distance of charge carriers. The origin of the influence of technological parameters characterizing the synthesis of La{sub 1-x}Ag{sub y}MnO{sub 3} ceramic materials on their physical properties has been elucidated.

36 MATERIALS SCIENCE↗

Determination of the magnetic contribution to the heat capacity of cobalt oxide nanoparticles and the thermodynamic properties of the hydration layers

We present low temperature (11 K) inelastic neutron scattering (INS) data on four hydrated nanoparticle systems: 10 nm CoO 0.10H2O (1), 16 nmCo3O4 0.40H2O (2), 25 nm Co3O4 0.30H2O (3) and 40 nmCo3O4 0.026H2O (4). The vibrational densities of states were obtained for all samples and from these the isochoric heat capacity and vibrational energy for the hydration layers confined to the surfaces of these nanoparticle systems have been elucidated. The results show that water on the surface of CoO nanoparticles is more tightly bound than water confined to the surface of Co3O4, and this is reflected in the reduced heat capacity and vibrational entropy for water on CoO relative to water on Co3O4 nanoparticles. This supports the trend, seen previously, for water to be more tightly bound in materials with higher surface energies. The INS spectra for the antiferromagnetic Co3O4 particles (2 4) also show sharp and intense magnetic excitation peaks at 5 meV, and from this the magnetic contribution to the heat capacity of Co3O4 nanoparticles has been calculated; this represents the first example of use of INS data for determining the magnetic contribution to the heat capacity of any magnetic nanoparticle system.

Spencer, Elinor↗

Low temperature heat capacity and thermodynamic functions of anion bearing sodalites Na 8 Al 6 Si 6 O 24 X 2 (X = SO 4 , ReO 4 , Cl, I)

Heat capacities of sulfate, perrhenate, chloride, and iodide sodalites with the ideal formula Na 8 Al 6 Si 6 O 24 X 2 (X = SO 4 , ReO 4 , Cl, I) were measured from 2 K to 300 K using a Quantum Design Physical Property Measurement System (PPMS). From the heat capacity data, the standard thermodynamic functions were determined. All four sodalites undergo a phase transition below room temperature for which thermodynamic parameters were determined. Additionally, the heat capacity of one of the constituent compounds (NaReO 4 ) was measured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heat capacity, entropy, formation energy and spin-fluctuation behavior of U 3 Si 5 from 2.4 to 397.4 K

U-Si intermetallic compounds are of considerable interest for their applications as accident-tolerant nuclear fuels. Here we present low-temperature heat capacity (LTHC) measurements of one of the U-Si phases, U 3 Si 5 , using a Quantum Design Physical Properties Measurement System (PPMS) from 2.4 to 397.4 K. We observed an upturn in C p /T (T) below 10 K and have attributed this behavior to potential spin-fluctuations (SF) with an SF temperature (T sf ) of 27 K. An enhancement of LTHC was also observed, as manifested by a large electronic heat capacity coefficient (γ el ) of 342.9 mJ/mol•K 2 . From the heat capacity data, the following thermodynamic parameters were determined: the characteristic Debye temperature (θ D ) over the temperature range 30 – 397 K is 177 ± 2 K, and the standard entropy ($Δ^{298.15}_0$$S^o$) is 283.3 ± 5.7 J•mol -1 •K -1 (equivalent to 35.4 ± 0.7 J•mol -1 •atom -1 •K -1 ). Combined with our previously measured formation enthalpy ($Δ_fH^°_{el}$) of U 3 Si 5 , the Gibbs free energy of formation of U 3 Si 5 from the elements ($Δ_fG^°_{el}$) was determined to be –45.2 ± 9.0 kJ•mol -1 •atom -1 .

36 MATERIALS SCIENCE↗

Bose-Einstein condensation and heat capacity of two-dimensional spin-polarized atomic hydrogen

The static fluctuation approximation (SFA) is used to study the condensate fraction and the specific heat capacity of finite two-dimensional spin-polarized atomic hydrogen. It is found that Bose-Einstein condensation occurs in this system. The transition temperature at different densities decreases as the number of particles of the system increases. At low density, a sharp peak in the specific heat capacity is observed at the transition temperature. On the other hand, as the density of the system increases, the transition temperature becomes no longer well-defined, and a hump is observed in the specific heat capacity around the transition temperature. A qualitative comparison of our results to published results for finite Bose systems shows good agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heat capacity in weakly correlated liquids

Previously unavailable numerical data related to the heat capacity in two- and three-dimensional liquid Yukawa systems are obtained by means of fluctuation theory. The relations between thermal conductivity and diffusion constants are numerically studied and discussed. New approximation for heat capacity dependence on non-ideality parameter for weakly correlated systems of particles is proposed. Comparison of the obtained results to the existing theoretical and numerical data is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High capacity heat pipe performance demonstration

A high capacity heat pipe which will operate in one-g and in zero-g is investigated. An artery configuration which is self-priming in one-g was emphasized. Two artery modifications were evolved as candidates to achieve one-g priming and will provide the very high performance: the four artery and the eight artery configurations. These were each evaluated analytically for performance and priming capability. The eight artery configuration was found to be inadequate from a performance standpoint. The four artery showed promise of working. A five-inch long priming element test article was fabricated using the four artery design. Plexiglas viewing windows were made on each end of the heat pipe to permit viewing of the priming activity. The five-inch primary element would not successfully prime in one-g. Difficulties on priming in one-g raised questions about zero-g priming. Therefore a small test element heat pipe for verifying that the proposed configuration will self-prime in zero-g was fabricated and delivered.

Source record↗

Heat capacity, resistivity, and angular dependent magnetization studies of single crystal Nd 1 + ϵ Fe 4 B 4 for ϵ ≈ 1 7

Advances in crystal growth have allowed for synthesis of large single crystals of Nd 1+ϵ Fe 4 B 4 , a well-known phase with a modulated structure. As a result we are able to report heat capacity and resistivity measurements on a single crystal Nd 1+ϵ Fe 4 B 4 sample with a distribution of ϵ that skews towards the solubility limit of Nd near ϵ ≈ 17. Heat capacity measurements show evidence of crystal field splitting at temperatures higher than the long-range ferromagnetic Curie temperature. Heat capacity, resistivity, and magnetization measurements all confirm a Curie temperature of 7 K which is lower than previously reported values in the Nd 1+ϵ Fe 4 B 4 system. Here, we also perform measurements of the angular dependence of the magnetization and discover behavior associated with the magnetic anisotropy that is inconsistent with the simple description previously proposed.

36 MATERIALS SCIENCE↗