Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grain texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Electron microscopic observations of hydrogen implantation in ilmenites

Hydrogen ion beams were found to form submicrometer, bumpy textures on the surface of ilmenite grains. From this effect, it is believed that similar bumpy textures seen on lunar ilmenite, pyroxene, and olivine grains are likely to be caused by solar wind irradiation. As a consequence, the concentration of bumpy textured grains may be a useful index of surface maturity for lunar soils. An attempt was made to search for grains with these bumpy textures in interplanetary dust and lunar and meteoritic regolith breccias in order to obtain information about the duration of their exposure to the solar wind. Solar wind irradiation was simulated on natural, terrestrial ilmenite. Hydrogen ion beams were directed at small grains and polished sections which were then examined by electron microscopy.

Blanford, G. E.↗
NASA NTRS1975

Experimental modeling of the cooling history of Apollo 12 olivine basalts

An analog of the Apollo 12 olivine vitrophyres has been crystallized in a 1-atm gas-mixing furnace at cooling rates ranging between 1250 and 0.7 C/hr and isothermally at degrees of supercooling ranging from 10 C to 325 C. Mineral chemistry, crystal shapes, grain sizes and textures are systematically related to cooling rate and degree of supercooling. At linear cooling rates not exceeding 40 C/hr the texture is porphyritic - large olivine crystals are set in a groundmass of finer-grained pyroxene, plagioclase, and ilmenite; a later generation of olivine never crystallizes. There are three shapes of olivine crystals in the Apollo 12 olivine vitrophyres: glomerocrysts of subhedral crystals, large subequant skeletons, and highly elongate skeletons. These result from three generations of nucleation and a two-stage cooling history - a slow preeruption stage and a rapid continuously increasing posteruption stage. It seems likely that the Apollo 12 olivine basalt magmas were erupted with olivine crystals in suspension. The nucleation temperature of olivine in cooling-rate experiments is dependent on the experimental technique, and hence results of cooling experiments should be applied with caution.

Donaldson, C. H.↗
NASA NTRS1990

A distinct variant of high-titanium mare basalt from the Van Serg core, Apollo 17 landing site

A fragment of basalt picked from the drive tube collected at Van Serg crater at the Apollo 17 landing site has a bulk chemistry more primitive than that of other high-titanium mare basalt groups collected at the site. The sample has a fine-grained olivine phyric, subophitic texture that is distinct from that of other high-titanium basalt samples. The grain size and texture suggest that the sample has a composition close to that of a magma. The crystallization sequence, with appearance of oxide minerals later than in other groups, and other petrographic features such as more-calcic plagioclase and early pigeonite rather than augite, are consistent with this sample representing a distinct variant of Apollo 17 high-titanium basalts. It is not related through closed-system igneous processes to any of the other mare basalt groups identified among Apollo 17 samples. Its characters emphasize the complexity of contemporaneous magma processes on the moon and the heterogeneity of that part of the mantle that was melted.

Ryder, Graham↗
NASA NTRS2015

Classification Scheme for Diverse Sedimentary and Igneous Rocks Encountered by MSL in Gale Crater

The Curiosity Rover landed in a lithologically and geochemically diverse region of Mars. We present a recommended rock classification framework based on terrestrial schemes, and adapted for the imaging and analytical capabilities of MSL as well as for rock types distinctive to Mars (e.g., high Fe sediments). After interpreting rock origin from textures, i.e., sedimentary (clastic, bedded), igneous (porphyritic, glassy), or unknown, the overall classification procedure (Fig 1) involves: (1) the characterization of rock type according to grain size and texture; (2) the assignment of geochemical modifiers according to Figs 3 and 4; and if applicable, in depth study of (3) mineralogy and (4) geologic/stratigraphic context. Sedimentary rock types are assigned by measuring grains in the best available resolution image (Table 1) and classifying according to the coarsest resolvable grains as conglomerate/breccia, (coarse, medium, or fine) sandstone, silt-stone, or mudstone. If grains are not resolvable in MAHLI images, grains in the rock are assumed to be silt sized or smaller than surface dust particles. Rocks with low color contrast contrast between grains (e.g., Dismal Lakes, sol 304) are classified according to minimum size of apparent grains from surface roughness or shadows outlining apparent grains. Igneous rocks are described as intrusive or extrusive depending on crystal size and fabric. Igneous textures may be described as granular, porphyritic, phaneritic, aphyric, or glassy depending on crystal size. Further descriptors may include terms such as vesicular or cumulate textures.

Schmidt, M. E.↗
NASA NTRS1975

Rocks 60618 and 65785 - Evidence for admixture of KREEP in lunar impact melts

We present evidence to support the hypothesis that the fine-grained, basaltic-textured portions of rocks 60618 and 65785 were produced by impact melting of the coarse-grained spinel-olivine anorthosite (60618) and spinel troctolite (65785) portions, coupled with admixture of approximately 33% and 63%, respectively, material of alkalic high-alumina basalt (KREEP) composition. The abundance of impact-modified rocks at the Apollo 16 site with compositional similarities to the impact melts reported here, suggests that the relations observed in these rocks are indicative of widespread impact mixing with KREEP in rocks of the lunar highlands.

Keil, K.↗
NASA NTRS1997

The Scattering Properties of Natural Terrestrial Snows versus Icy Satellite Surfaces

Our comparisons of the single particle scattering behavior of terrestrial snows and icy satellite regoliths to the laboratory particle scattering measurements of McGuire and Hapke demonstrate that the differences between icy satellite regoliths and their terrestrial counterparts are due to particle structures and textures. Terrestrial snow particle structures define a region in the single particle scattering function parameter space separate from the regions defined by the McGuire and Hapke artificial laboratory particles. The particle structures and textures of the grains composing icy satellites regoliths are not simple or uniform but consist of a variety of particle structure and texture types, some of which may be a combination of the particle types investigated by McGuire and Hapke.

Domingue, Deborah↗
NASA NTRS1998

Characterization of Al-Cu-Li Alloy 2090 Near Net Shape Extrusion

Aluminum-lithium (Al-Li) alloys near net shape extrusions are being evaluated for potential application in launch vehicle structures. The objective of this study was to determine tensile and fracture properties, corrosion resistance, and weldability of integrally stiffened panels of Al-Cu-Li alloy 2090 in the T8 temper. The microstructure was pre-dominantly unrecrystallized. Texture analyses revealed the presence of fiber components in the stiffeners and a combination of fiber and rolling components in the skin. Variations in grain morphology and texture through the extruded cross section were correlated with the tensile, fracture, and corrosion behavior. Tensile strengths at room and cryogenic temperatures of the 2090 extrusions were similar to other 2090 product forms and were higher than 2219-T87, the primary structural material in the Space Shuttle external tank; however, ductilities were lower. The fracture resistance of the 2090 extrusion was lower than 2219-T87 plate at room temperature. At cryogenic temperatures, tensile ductility and fracture behavior of the 2090 extrusion were similar to other 2090 product forms but were lower than 2219-T87 plate. The exfoliation and stress corrosion resistance of the 2090 extrusion compared favorably with the characteristics of other 2090 product forms. The weldability and weldment properties of the extrusions were similar to 2090 and 2219 plates.

Birt, M. J.↗
NASA NTRS2005

Comparison of Morphologies of Apollo 17 Dust Particles with Lunar Simulant, JSC-1

Lunar dust (< 20 microns) makes up approx.20 wt.% of the lunar soil. Because of the abrasive and adhering nature of lunar soil, a detailed knowledge of the morphology (size, shape and abundance) of lunar dust is important for dust mitigation on the Moon. This represents a critical step towards the establishment of long-term human presence on the Moon (Taylor et al. 2005). Machinery design for in-situ resource utilization (ISRU) on the Moon also requires detailed information on dust morphology and general physical/chemical characteristics. Here, we report a morphological study of Apollo 17 dust sample 70051 and compare it to lunar soil stimulant, JSC-1. W e have obtained SEM images of dust grains from sample 70051 soil (Fig. 1). The dust grains imaged are composed of fragments of minerals, rocks, agglutinates and glass. Most particles consist largely of agglutinitic impact glass with their typical vesicular textures (fine bubbles). All grains show sub-angular to angular shapes, commonly with sharp edges, common for crushed glass fragments. There are mainly four textures: (1) ropey-textured pieces (typical for agglutinates), (2) angular shards, (3) blocky bits, and (4) Swiss-cheese grains. This last type with its high concentration of submicron bubbles, occurs on all scales. Submicron cracks are also present in most grains. Dust-sized grains of lunar soil simulant, JSC-1, were also studied. JSC-1 is a basaltic tuff with relatively high glass content (approx.50%; McKay et al. 1994). It was initially chosen in the early 90s to approximate the geotechnical properties of the average lunar soil (Klosky et al. 1996). JSC-1 dust grains also show angular blocky and shard textures (Fig. 2), similar to those of lunar dust. However, the JSC-1 grains lack the Swiss-cheese textured particles, as well as submicron cracks and bubbles in most grains.

Liu, Yang↗
NASA NTRS2026

Evaluation of Superalloy 718 Additively Manufactured Lattice Blocks

Lattice block structures made up of high temperature superalloys could offer advantages in density, efficiency, and tailored properties. Three candidate lattice designs were screened through additive manufacturing of superalloy 718. Laser powder bed fusion was applied with 718 powder to produce lattice blocks for three-dimensional octahedral unit cell designs of three heights. As-designed versus additively manufactured 718 lattices were compared, including structural dimensions, densities, defects, grain structures, crystallographic texture, and surface residual stresses. Manufactured lattice I diverged the most from its design, with both corner and center nodes merged into continuous columns. Manufactured lattice III came closest to its design, though the actual nodes and struts were still larger in cross section than in the design. Only modest grain coarsening and negligible chemical segregation were observed for all three designs, suggesting uniform thermo-physical and mechanical properties are possible. Significant tensile residual stresses were present at the surface of the manufactured blocks, with highest stresses in the building direction. Current findings indicate this concept could produce useful superalloy structures for high-temperature-capable static components requiring tailored density, and thermo-physical/mechanical properties.

super alloys↗
NASA NTRS2015

Insights into the Martian Regolith from Martian Meteorite Northwest Africa 7034

Everything we know about sedimentary processes on Mars is gleaned from remote sensing observations. Here we report insights from meteorite Northwest Africa (NWA) 7034, which is a water-rich martian regolith breccia that hosts both igneous and sedimentary clasts. The sedimentary clasts in NWA 7034 are poorly-sorted clastic siltstones that we refer to as protobreccia clasts. These protobreccia clasts record aqueous alteration process that occurred prior to breccia formation. The aqueous alteration appears to have occurred at relatively low Eh, high pH conditions based on the co-precipitation of pyrite and magnetite, and the concomitant loss of SiO2 from the system. To determine the origin of the NWA 7034 breccia, we examined the textures and grain-shape characteristics of NWA 7034 clasts. The shapes of the clasts are consistent with rock fragmentation in the absence of transport. Coupled with the clast size distribution, we interpret the protolith of NWA 7034 to have been deposited by atmospheric rainout resulting from pyroclastic eruptions and/or asteroid impacts. Cross-cutting and inclusion relationships and U-Pb data from zircon, baddelleyite, and apatite indicate NWA 7034 lithification occurred at 1.4-1.5 Ga, during a short-lived hydrothermal event at 600-700 C that was texturally imprinted upon the submicron groundmass. The hydrothermal event caused Pb-loss from apatite and U-rich metamict zircons, and it caused partial transformation of pyrite to submicron mixtures of magnetite and maghemite, indicating the fluid had higher Eh than the fluid that caused pyrite-magnetite precipitation in the protobreccia clasts. NWA 7034 also hosts ancient 4.4 Ga crustal materials in the form of baddelleyites and zircons, providing up to a 2.9 Ga record of martian geologic history. This work demonstrates the incredible value of sedimentary basins as scientific targets for Mars sample return missions, but it also highlights the importance of targeting samples that have not been overprinted by metamorphic processes, which is the case for NWA 7034.

McCubbin, Francis M.↗
NASA NTRS2001

Structure-Property Correlations in Al-Li Alloy Integrally Stiffened Extrusions

The objective of this investigation was to establish the relationship between mechanical property anisotropy, microstructure and crystallographic texture in integrally 'T'-stiffened extruded panels fabricated from the Al-Li alloys 2195, 2098 and 2096. In-plane properties were measured as a function of orientation at two locations in the panels, namely mid-way between (Skin), and directly beneath (Base), the integral 'T' stiffeners. The 2195 extrusion exhibited the best combination of strength and toughness, but was the most anisotropic. The 2098 extrusion exhibited lower strength and comparable toughness, but was more isotropic than 2195. The 2096 extrusion exhibited the lowest strength and poor toughness, but was the most isotropic. All three alloys exhibited highly elongated grain structures and similar location-dependent variations in grain morphology. The textural characteristics comprised a beta + <100> fiber texture, similar to rolled product, in the Skin regions and alpha <111> + <100> fiber texture, comparable to axisymmetric extruded product, in the Base regions. In an attempt to quantitatively correlate texture with yield strength anisotropy, the original 'full constraint' Taylor model and a variant of the 'relaxed constraint' model, explored by Wert et al., were applied to the data. A comparison of the results revealed that the Wert model was consistently more accurate than the Taylor model.

Hales, Stephen J.↗
NASA NTRS1993

Chemical composition of new Acapulcoites and Lodranites

The bulk compositions of two Antarctic Lodranites, MAC 88177 and FRO 90011, and two Acapulcoites, ALH 81261 and Monument Draw, were determined with instrumental neutron activation analysis. Acapulcoites have essentially chondritic major and trace element abundances but achondritic texture. They consist of entirely recrystallized, fine grained mineral assemblages. Chondrules are extremely rare; one relict radiating pyroxene chondrule was described in Monument Draw (MD). The coarse grained Lodranites also have achondritic textures, but they are different compositionally with depletions in Al, Na, and incompatible elements probably a result of separation of partial, feldspar-rich melt. MAC 88177 is significantly more depleted in incompatible elements than FRO 90011 suggesting a higher degree of partial melting for the MAC-Lodranite. The chemical data support a genetic relationship between Lodranites and Acapulcoites inferred earlier from oxygen isotopes, petrology, and mineral composition.

Zipfel, J.↗
NASA NTRS1974

Ultra sound absorption measurements in rock samples at low temperatures

A new technique, comparable with the reverberation method in room acoustics, is described. It allows Q-measurements at rock samples of arbitrary shape in the frequency range of 50 to 600 kHz in vacuum (.1 mtorr) and at low temperatures (+20 to -180 C). The method was developed in particular to investigate rock samples under lunar conditions. Ultrasound absorption has been measured at volcanics, breccia, gabbros, feldspar and quartz of different grain size and texture yielding the following results: evacuation raises Q mainly through lowering the humidity in the rock. In a dry compact rock, the effect of evacuation is small. With decreasing temperature, Q generally increases. Between +20 and -30 C, Q does not change much. With further decrease of temperature in many cases distinct anomalies appear, where Q becomes frequency dependent.

Herminghaus, C.↗
NASA NTRS1976

Heterogeneity in titaniferous lunar basalts

Small but real chemical differences exist between subsamples of fine-grained quench-textured titaniferous lunar basalts. The existence of different textural domains with different chemistries is thought to account for most of this variation. In addition to the textural domains, lunar sample 74275 has a population of olivine 'megacrysts' as well as dunite fragments. These materials are thought to be extraneous and to compromise the primary nature of 74275. Recognition of the small chemical variations present may aid in understanding some discrepancies in the experimental-petrology literature. However, these small variations have a distressing petrogenetic significance since they severely limit resolution in recognizing the number and depth of origin of primary magmas.

Walker, D.↗
NASA NTRS1978

Manicouagan impact melt, Quebec. I - Stratigraphy, petrology, and chemistry

A sheet of clast-laden impact melt 230 m thick and 55 km in diameter forms an annular plateau surrounding an uplift of shocked anorthosite within the moderately eroded Manicouagan structure. Three gradational units of the melt sheet are characterized with respect to grain size, inclusions, texture, and mineralogy. The melt rocks as a group are chemically homogeneous with a bulk composition similar to that of latite and with no statistically significant regional chemical variations. The melt is not completely chemically homogeneous as a local mafic variant represented by two samples with poikilitic texture was found. These poikilitic rocks texturally resemble some Apollo 17 impact melt rocks and are inferred to have had a similar origin and thermal history.

Floran, R. J.↗
NASA NTRS1978

Ar-39-Ar-40 and petrologic study of Luna 24 samples 24077,13 and 24077,63

The ferrogabbro 24077,13, with pyroxene and plagioclase major and minor element chemical ranges comparable to the dominant ferrogabbro component in the Luna 24 core, has a Ar-39-Ar-40 temperature release age of 3.33 plus or minus 0.21 billion years. The metaferrobasalt 24077,63 is very fine-grained with a texture and mineralogy consistent with contact metamorphism between superimposed basalt flows or within a single flow. The Ar-39-Ar-40 plateau age of 24077,63 is 3.26 plus or minus 0.4 billion years. The basalt flows in Mare Crisium are about the same age as those of Mare Imbrium and younger than those of Mare Tranquillitatis and Mare Serenitatis.

Schaeffer, O. A.↗
NASA NTRS1983

Sedimentary processes and crustal cycling on Venus

Sediment exists on the Venus surface. It is observed in Venera images between outcrops and boulders of sedimentary rocks. Sediment is produced by pyroclastic volcanism and chemical weathering. Chemical weathering is driven by an enhanced activity of water and an elevated surface temperature. Sediment is transported by wind action and lithified by cementration and diagenesis. Cementation may be by carbonate or silica cement; diagenesis may be products of chemical weathering acting as cement, or by compaction and recrystallization of sediment into a texture with interlocking grains. Sediment may be transported from the top of sialic continents (such as Ishtar) to the modal plains where it is deposited, lithified, and integrated into thy local crust. As new layers are added, the bottom of the crust melts and is, in part, returned to the mantle. A steady-state chemical exchange might exist by this mechanism of crustal cycling that links atmosphere, continents, modal plains, and mantle.

Warner, J. L.↗
NASA NTRS1984

The case for a melt matrix in plagioclase-POIK mesosiderites

Reasons are given for reclassifying former 'poikiloblastic' mesosiderites as 'poikilitic' in order to better represent their thermal histories. Attention is focused on the plagioclase-POIK mesosiderites Bondoc, Budulan, and Mincy, which all display silicate melt matrices similar to the Palisades sill and Apollo 17 mare basalts. The poikilitic textures, resorbed olivine grains, and the crystallization sequence are sufficient to reclassify the three specimens from 3B to 4B mesosiderites. Because the 4B mesosiderites are clast-laden melt rocks, their origins were probably in impact melts, which would have combined hot melts with cold clasts.

Hewins, R. H.↗