Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “full waveform inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

3D Deep Learning Joint Inversion of Active Seismic Full Waveform and Passive Seismic Traveltime Data for Reservoir Imaging and Uncertainty Quantification

Here, we present deep learning (DL) networks for three-dimensional (3D) joint inversion of active seismic full waveform and passive seismic traveltime data to image reservoirs and their properties and quantify imaging uncertainties. Active seismic full-waveform data can provide high-resolution monitoring images but are collected only intermittently because of their high acquisition cost. In contrast, passive seismic data can be gathered at relatively low cost between regular active surveys, although their imaging quality can be compromised by factors such as low signal-to-noise ratios and limited ray coverage of the target. Although these datasets are routinely acquired together at CO 2 storage sites, their combined inversion within a 3D DL framework has not been previously demonstrated. To our knowledge, this is the first study to address this gap, combining the strength of both data types. For efficient data storage and DL training with large 3D seismic datasets, we use a 3D data matrix in which a random number of passive seismic traveltime data are stored as parabolic envelopes using one-hot encoding and a 3D full-waveform data matrix in which multiple shot gathers are summed. Two network architectures are evaluated: a single-encoder U-Net for single-data type inversion and a dual-encoder U-Net for joint inversion of active and passive seismic data. We also evaluate the single-encoder U-Net for joint inversion by concatenating full-waveform data and traveltime data. We propose a systematic approach for selecting an optimal dropout rate that balances regularization during training and Monte Carlo dropout-based uncertainty quantification during prediction by examining the correlation coefficient between standard deviation and prediction error, along with the training misfit, across a range of dropout rates. 3D DL inversion experiments include five different network configurations, with evaluations under ideal, noisy and dropout-enabled conditions. Both model and data uncertainties are assessed, as well as their combined effects. Across all conditions, the networks consistently predict accurate CO 2 saturation models with low prediction errors, such as a structural similarity index of 0.993 and CO 2 difference of 1.1%. Uncertainty estimates show strong spatial correlation with prediction errors, confirming the effectiveness of the proposed dropout selection approach. The results demonstrate that our DL approach, utilizing compact data representations and appropriate uncertainty quantification, yields accurate subsurface images under various inversion conditions and provides valuable insights into the reliability of predictions.

Um, Evan Schankee [Lawrence Berkeley National Labo↗

Comparing Adjoint Waveform Tomography Models of California Using Different Starting Models

Abstract Adjoint waveform tomography (AWT) sits at the cutting edge of seismic tomography on local, regional, and global scales. However, the choice in starting model may have a significant impact on the final inversion results. In this paper, we present 3 AWT models of California that are based on different starting models. We chose three models that were inverted at different scales: SPiRaL, a global travel‐time tomography model (Simmons et al., 2021, 10.1093/gji/ggab277 ), CSEM_NA, a regional adjoint tomography model of North America and the North Atlantic (Krischer et al., 2018, 10.1029/2017JB015289 ), and WUS256, a regional adjoint tomography model of the western US (Rodgers et al., 2022, https://doi.org/10.1029/2022JB024549 ). We then inverted three AWT models using the same source and receiver set. We ran each model over three period bands: 30–100 s, 25–100 s, and 20–80 s. Once the iterations were finalized, we used five methods of testing model similarity in both the model and data space. We conclude that the choice of starting model has a minimal impact on long wavelength models if an appropriate multi‐scale inversion approach is used.

58 GEOSCIENCES↗

Survey of Deep Learning and Physics-Based Approaches in Computational Wave Imaging

Computational wave imaging (CWI) extracts hidden structure and physical properties of a volume of material by analyzing wave signals that traverse that volume. Applications include seismic exploration of the Earth’s subsurface, acoustic imaging and nondestructive testing (NDT) in material science, and ultrasound computed tomography (USCT) in medicine. Current approaches for solving CWI problems can be divided into two categories: those rooted in traditional physics and those based on deep learning. Physics-based methods stand out for their ability to provide high-resolution and quantitatively accurate estimates of acoustic properties within the medium. However, they can be computationally intensive and are susceptible to ill-posedness and nonconvexity typical of CWI problems. Machine learning (ML)-based computational methods have recently emerged, offering a different perspective to address these challenges. Diverse scientific communities have independently pursued the integration of deep learning in CWI. This review discusses how contemporary scientific ML techniques, and deep neural networks in particular, have been developed to enhance and integrate with traditional physics-based methods for solving CWI problems. We present a structured framework that consolidates existing research spanning multiple domains, including computational imaging, wave physics, and data science. This study concludes with important lessons learned from existing ML-based methods and identifies technical hurdles and emerging trends through a systematic analysis of the extensive literature on this topic.

42 ENGINEERING↗

Cross-Well Seismic Monitoring of CO 2 Injected Into the A-1 Carbonate and Brown Niagaran Formations at the Chester 16 Reef

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. A cross-well seismic survey was acquired in the Chester 16 reef to attempt to locate 85,000 tonnes of carbon dioxide (CO 2 ) that were injected into the A-1 Carbonate and Brown Niagaran Formations earlier. The technique of conducting multiple cross-well seismic surveys over time, including a pre-CO 2 injection (baseline) survey, has been used elsewhere to monitor CO 2 injected into the subsurface. In this study, a baseline cross-well survey was not obtained; nevertheless, it was possible to generate an image that is a plausible representation of the CO 2 plume. This conclusion is supported by other monitoring and modeling results from the Chester 16 reef that provide an independent indication about the likely position of the injected CO 2 .

01 COAL, LIGNITE, AND PEAT↗

Improved Regional Moment Tensor Inversion for Moderately Large Earthquakes in the Western United States Using a 3D Earth Model Based on Full Waveform Tomography

The nature of seismic sources for moderately large (moment magnitude, M w 5.0–6.5) events are commonly characterized by their moment tensor (MT) solutions and obtained by inversion of regional distance (200–1600 km) long‐period (20–50 s) waveforms. Regional MT estimates are often calculated from average plane‐layered, one‐dimensional (1D) velocity models. However, 1D model calculations can produce misfits in the arrival times and waveform shapes that introduce errors, particularly at longer distances or for shorter periods, which are necessary for analyzing lower magnitude events. Approximate Earth models (e.g., 1D) representing broad areas may be inadequate, particularly in the crust and uppermost mantle of tectonically complex regions. In this study, we show how a three‐dimensional (3D) Earth model obtained from full waveform inversion tomography can improve waveform fits and decrease phase errors. We developed a platform and workflow to perform routine 3D MT inversions and inverted MTs for 25 earthquakes in the western United States and seven nuclear explosions using an average 1D and a recent 3D Earth model, WUS256 (Rodgers et al., 2022). Using the 3D model improves waveform fits (variance reduction and phase time shifts) compared with the 1D model, and the 3D MT solutions are stable across large distances. This study shows that 3D models obtained from full waveform tomography can improve MTs and source characterization especially at far regional distances (>800 km).

Geosciences↗

Quantifying uncertainty in regional-scale seismic moment tensors

We examine the ability of three different inversion methods: 1) first motion (FM) inversions, 2) amplitude inversions, and 3) full waveform (FW) time variable moment tensor (TVMT) inversions, to recover an accurate source mechanism for simulated data for an earthquake as well as an explosion. The ability of inversion methods, such as the ones described above, to recover accurate models representative of the data depends on both a priori information as well as the quality of data being inverted. Therefore, we examine the effect that station geometry, geologic model, and noise level has on the inversion and estimated source mechanism. We find that FM data can provide more robust solutions than amplitude data and are not as sensitive to inaccurate earth models, especially in low-noise cases, and overall FW inversions are the most accurate out of the methods examined, but can still be biased by inaccurate earth models.

58 GEOSCIENCES↗

Seismic source characterization of the Arabian Peninsula and Zagros Mountains from regional moment tensor and coda envelopes

Reliable estimates of moment magnitude and source mechanism for seismic events in the Middle East can be challenging due to a small number of openly available stations, the complex tectonic setting, and regions of high attenuation. Access to high-quality waveform data from well-calibrated regional seismic stations is fundamental in producing robust and stable estimates of earthquake source parameters, particularly when measurements of absolute ground motion amplitudes are required. Earthquake source mechanism and moment magnitude are invaluable information in the assessment of seismic hazard, plate motions, and the characterization of faults and regional stress field. The expansion of the Kingdom of Saudi Arabia’s national seismic network in the past several decades provides an opportunity to develop the capabilities of routine focal mechanism and moment magnitude estimations. In this study, we use time-domain full waveform moment tensor inversion and coda envelope–derived amplitude measurements to solve for earthquake source mechanism, moment magnitudes, and their source type. Furthermore, we compared the moment magnitudes calculated from the two methods and publicly available earthquake catalogs and discuss the implications of the obtained source parameters.

58 GEOSCIENCES↗

Improved Earthquake Source Parameters with 3D Wavespeed Models in California and Nevada

Seismic tomography harnesses earthquake data to explore the inaccessible structure of the Earth. Adjoint waveform tomography (AWT), a method of seismic tomography, updates the tomographic model by optimizing the fit between observed earthquake data and synthetic waveforms. The synthetic data are calculated by solving the wave equation through a given 3D model. An important requirement to calculating synthetics is the source information (location, centroid time, depth, and moment tensor). Errors in source information affect the quality of the synthetics produced, which in turn can limit how structure can be inferred in the AWT workflow. Here, to test the effect of updating source information, we used MTTime (Chiang, 2020), a time-domain full-waveform moment tensor inversion code, to calculate the moment tensors and depths of 118 earthquakes that occurred in California and Nevada over a 20-yr period. We calculated 3D Green’s functions using a 3D seismic wavespeed model of California and Nevada (Doody et al., 2023b). We show that the inverted solutions provide better waveform fits than the Global Centroid Moment Tensor catalog and increase usable, well-correlated data by up to 7%. Therefore, we argue that recalculating source parameters should be considered in AWT workflows, particularly for smaller magnitude events (⁠M w > 5.0).

58 GEOSCIENCES↗

Evaluation of a preliminary regional Earth model through comparison of synthetic and observed waveform data

In this report, we document the process related to developing a regional geologic model of a 605 x 1334 km area centered around Utah and encompassing surrounding states. This model is developed to test the effect that composition of a model has on the generation of synthetic data with the intent of using this information to improve upon full waveform moment tensor inversions. We compare observed data from three seismic events and five stations to the synthetic data generated by a preliminary model derived from a geologic framework model (GFM) developed by the USGS. The synthetic data and observed data comparisons indicate that our preliminary model performs well at smaller offset distances in the northern and central sections of the model. However, the southern stations consistently display synthetic data P- and S-wave arrival times that do not match the observed data arrival times, indicating that the velocity structure of the southern part of the model especially is inaccurate.

58 GEOSCIENCES↗

Uncertainty Quantification of Geophysical Inversion Using Stochastic Partial Differential Equations (LDRD #218329)

This report summarizes work completed under the Laboratory Directed Research and Development (LDRD) project "Uncertainty Quantification of Geophysical Inversion Using Stochastic Differential Equations." Geophysical inversions often require computationally expensive algorithms to find even one solution, let alone propagating uncertainties through to the solution domain. The primary purpose of this project was to find more computationally efficient means to approximate solution uncertainty in geophysical inversions. We found multiple computationally efficient methods of propagating Earth model uncertainty into uncertainties in solutions of full waveform seismic moment tensor inversions. However, the optimum method of approximating the uncertainty in these seismic source solutions was to use the Karhunen-Love theorem with data misfit residuals. This method was orders of magnitude more computationally efficient than traditional Monte Carlo methods and yielded estimates of uncertainty that closely approximated those of Monte Carlo. We will summarize the various methods we evaluated for estimating uncertainty in seismic source inversions as well as work toward this goal in the realm of 3-D seismic tomographic inversion uncertainty.

58 GEOSCIENCES↗

Deep learning multiphysics network for imaging CO 2 saturation and estimating uncertainty in geological carbon storage

Multiphysics inversion exploits different types of geophysical data that often complement each other and aims to improve overall imaging resolution and reduce uncertainties in geophysical interpretation. Despite the advantages, traditional multiphysics inversion is challenging because it requires a large amount of computational time and intensive human interactions for preprocessing data and finding trade-off parameters. These issues make it nearly impossible for traditional multiphysics inversion to be applied as a real-time monitoring tool for geological carbon storage. In this paper, we present a deep learning (DL) multiphysics network for imaging CO 2 saturation in real time. The multiphysics network consists of three encoders for analysing seismic, electromagnetic and gravity data and shares one decoder for combining imaging capabilities of the different geophysical data for better predicting CO 2 saturation. The network is trained on pairs of CO 2 label models and multiphysics data so that it can directly image CO 2 saturation. Here we use the bootstrap aggregating method to enhance the imaging accuracy and estimate uncertainties associated with CO 2 saturation images. Using realistic CO 2 label models and multiphysics data derived from the Kimberlina CO 2 storage model, we evaluate the performance of the deep learning multiphysics network and compare its imaging results to those from the deep learning single-physics networks. Our modelling experiments show that the deep learning multiphysics network for seismic, electromagnetic, and gravity data not only improves the imaging accuracy but also reduces uncertainties associated with CO 2 saturation images. Our results also suggest that the deep learning multiphysics network for the non-seismic data (i.e., electromagnetic and gravity) can be used as an effective low-cost monitoring tool in between regular seismic monitoring.

58 GEOSCIENCES↗

Seismic Waveform Inversion Capability on Resource-Constrained Edge Devices

Seismic full wave inversion (FWI) is a widely used non-linear seismic imaging method used to reconstruct subsurface velocity images, however it is time consuming, has high computational cost and depend heavily on human interaction. Recently, deep learning has accelerated it’s use in several data-driven techniques, however most deep learning techniques suffer from overfitting and stability issues. In this work, we propose an edge computing-based data-driven inversion technique based on supervised deep convolutional neural network to accurately reconstruct the subsurface velocities. Deep learning based data-driven technique depends mostly on bulk data training. In this work, we train our deep convolutional neural network (DCN) (UNet and InversionNet) on the raw seismic data and their corresponding velocity models during the training phase to learn the non-linear mapping between the seismic data and velocity models. The trained network is then used to estimate the velocity models from new input seismic data during the prediction phase. The prediction phase is performed on a resource-constrained edge device such as Raspberry Pi. Raspberry Pi provides real-time and on-device computational power to execute the inference process. In addition, we demonstrate robustness of our models to perform inversion in the presence on noise by performing both noise-aware and no-noise training and feeding the resulting trained models with noise at different signal-to-noise (SNR) ratio values. We make great efforts to achieve very feasible inference times on the Raspberry Pi for both models. Specifically, the inference times per prediction for UNet and InversionNet models on Raspberry Pi were 22 and 4 s respectively whilst inference times for both models on the GPU were 2 and 18 s which are very comparable. Finally, we have designed a user-friendly interactive graphical user interface (GUI) to automate the model execution and inversion process on the Raspberry Pi.

Manu, Daniel (ORCID:0000000154982677)↗

Seismic Event Characterization Using Full Moment Tensors on the Hypersphere

Moment tensor solutions provide insights into the deformation that has occurred in the source region of a seismic event and are therefore of great value in identifying different types of seismic sources, such as when monitoring for underground nuclear tests. Despite this utility, inversion of waveforms recorded by seismometers for their full seismic moment tensor is not yet routine, and development of robust methods to classify events based on this information is in its infancy. Here, we assemble an inventory of 1405 full moment tensor solutions that include explosive, earthquake, and collapse events, and investigate the use of anisotropic probability distribution functions on the 5D hypersphere to discriminate between these sources. Using a Bayesian classifier, we obtain optimal success rates of 98.4% across all events and demonstrate that modification of the prior probabilities provides a natural way to alter the balance between not missing desirable events (such as explosions) versus misclassifying large numbers of undesired events (such as earthquakes). The approach is specifically designed to progress from traditional, bipolar event screening metrics to more generalized event identification across multiple types of seismic sources. Despite current databases containing insufficient numbers of events to definitively demonstrate at present, we also find intriguing evidence of subgroupings within individual source populations on the hypersphere, for example, between chemical and nuclear explosions, raising the potential possibility of discriminating between these event types in the future.

Geosciences↗

Yield Estimation of the August 2020 Beirut Explosion by Using Physics‐Based Propagation Simulations of Regional Infrasound

Abstract The August 2020 Beirut explosion is the largest single‐fired ammonium nitrate explosion documented in history. The massive explosion excited loud infrasound in the atmosphere, and clear waveforms were recorded by a regional infrasound array at an epicentral distance of 100 km, allowing for accurate measurements of explosion energy. We estimate the explosion size based on the infrasound waveform inversion. Unlike conventional inversions using empirical models, we perform full 3‐D finite‐difference simulations to obtain a physics‐based propagation model for the inversion. Accurate numerical modeling of infrasound is challenging as the propagation is substantially affected by the turbulent atmosphere. Instead of a single deterministic prediction, we provide a range of waveform predictions by running multiple simulations with stochastic weather forecast models, which allows for comprehensive uncertainty analysis of numerical modeling and estimated yields. Finally, we expand the yield estimation technique for seismoacoustic analysis and demonstrate the substantial advantage of the joint approach.

58 GEOSCIENCES↗

Time-lapse seismic inversion for CO 2 saturation with SeisCO2Net: An application to Frio-II site

Seismic monitoring of geological CO 2 storage (GCS) involves highly nonlinear seismic inversion and petrophysical inversion, making it challenging to estimate CO 2 volume efficiently and detect possible early CO 2 leakages. Deep learning (DL) using convolutional neural networks (CNNs) has shown promise in solving highly nonlinear seismic inversion problems. However, direct estimation of CO 2 plume extent/saturation from time-lapse seismic gathers using DL is still underexplored, with no reported field applications to date. The investigation of field data is primarily hindered by scarcity of field data for neural network training. Other obstacles include highly nonlinear seismic-petrophysics inverse relationship, and presence of noise in field seismic data. We introduce SeisCO2Net, a deep CNN that predicts CO 2 saturation maps directly from time-lapse full waveform shot gathers. For training, we use site-specific geological information, fluid flow physics, rock physics, and seismic modeling to generate synthetic datasets that closely resemble the CO 2 storage site. Synthetic tests show promising results, inspiring us to apply SeisCO2Net's trained weights on field data collected at Frio-II GCS site by leveraging transfer learning principles. As reference, we compare SeisCO2Net's predicted CO 2 saturation maps with results obtained from physics-based inversion. Our analyses show both methods display similar CO 2 plume shapes, reasonable CO 2 plume characteristics, and comparable saturation values. Our results suggest pre-training CNNs on physics-informed synthetic datasets and then applying the learned weights to field data is a viable approach to estimating field CO 2 saturation. This method effectively addresses the scarcity of field training data, thus encouraging the feasibility of long-term GCS monitoring.

58 GEOSCIENCES↗