SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Herein, we review the recent development on a systematic deterministic formalism describing dynamics of both bulk and fluctuations in an arbitrary relativistic hydrodynamic flow carrying conserved charges. In particular, we discuss the implementation of such general formalism near the QCD critical point.
High-energy laser beams interacting with flowing plasmas can produce a plasma response that leads to deflection of the beam, beam bending. Such beams have usually a speckle structure generated by optical smoothing techniques that reduce the spatial and temporal coherence in the laser field pattern. The cumulative plasma response from laser speckles slows down the velocity of the incoming flow by momentum conservation. For slightly super-sonic flow the cumulative plasma response to the ponderomotive force exerted by the beam speckle ensemble is the strongest, such that slowing down the flow to subsonic velocities leads eventually to the generation of a shock around the cross section of the beam. This scenario has been predicted theoretically and is confirmed here by our hydrodynamic simulations in two dimensions with speckled beams and in one dimension with a reduced model. The conditions of shock generation are given in terms of the ponderomotive pressure, speckle size and the flow velocity. The nonlinear properties of the shocks are analyzed using Rankine–Hugoniot relations. According to linear theory, temporally smoothed laser beams exhibit a higher threshold for shock generation. Numerical simulations with beams that are smoothed by spectral dispersion compare well with the linear theory results, diverging from those produced by beams with only a random phase plates in the nonlinear regime. The conditions necessary for shock generation and their effects on the laser plasma coupling in inertial confinement fusion (ICF) experiments are also discussed.
An analytical study of nonsimilar jet mixing is made for compressible, nonisoenergetic flows. The conservation equations are solved for each of the streams above and below the dividing streamline by using Meksyn's asymptotic method of integration for solving boundary-layer problems. The problem of laminar mixing between two parallel streams is investigated for the case of a constant pressure gradient. It is found that the velocity and temperature profiles from the exact solution to the nonsimilar governing equations can be well approximated by the locally similar solution.
The 12-layer UCLA general circulation model encompassing troposphere and stratosphere (and superjacent 'sponge layer') is described. Prognostic variables are: surface pressure, horizontal velocity, temperature, water vapor and ozone in each layer, planetary boundary layer (PBL) depth, temperature, moisture and momentum discontinuities at PBL top, ground temperature and water storage, and mass of snow on ground. Selection of space finite-difference schemes for homogeneous incompressible flow, with/without a free surface, nonlinear two-dimensional nondivergent flow, enstrophy conserving schemes, momentum advection schemes, vertical and horizontal difference schemes, and time differencing schemes are discussed.
The mechanism of radiative heating of the afterbody region of Jovian entry probe is analyzed. A theoretical model is derived to determine the average thermodynamic properties in the expanding region, recirculating region, recompression region, and neck region through application of one-dimensional conservation equations. Flow parameters are obtained from the shadowgraphs of a free-flight test. Radiative transfer is calculated using spectrally detailed computer codes accounting for nonequilibrium. The results show that the most severe heating occurs immediately behind the frustum, and that the recompression and neck regions are the major sources of radiation that heats the base stagnation point. The radiation flux to the base point is slightly stronger with ablation than without, its value being 0.11(43Pb/Ps)squared times that to the front stagnation point, where Pb/Ps is the ratio of base-to-front stagnation point pressures and its value is in the range 0.023-0.066. The time-integrated heat load to the base point is 18(43Pb/Ps)squared kJ/sq cm. Existing experimental data are shown to agree with the theoretical prediction.
The present work deals with the fundamentals of gas lubrication theory, which forms the foundation of all analytical design tools for gas bearings. Most of the hard lessons learned in the past are outlined with reference to dry contact, debris ingestion, sliding speed, and chemical stability of lubricant. The mathematical theory of gas lubrication is described for scaling rules in thin-film viscous flow, momentum conservation, mass conservation, energy conservation, isothermal gas bearing theory, coupling effects, and global bearing characteristics. Particular attention is given to the governing differential equations for common bearing configurations. Also discussed are representative solutions of self-acting gas bearings, externally pressurized bearings, and time-dependent effects.
A patched-grid approach is one in which the flow region of interest is divided into subregions which are then discretized independently using existing grid generator. The equations of motion are integrated in each subregion in conjunction with patch-boundary schemes which allow proper information transfer across interfaces that separate subregions. The patched-grid approach greatly simplifies the treatment of complex geometries and also the addition of grid points to selected regions of the flow. A conservative patch-boundary condition that can be used with explicit, implicit factored and implicit relaxation schemes is described. Several example calculations that demonstrate the capabilities of the patched-grid scheme are also included.
Computational movies were used to analyze the formation and collapse of vapor cavitation bubbles in a submerged journal bearing. The effect of vibration amplitude on vapor cavitation was studied for a journal undergoing circular whirl. The boundary conditions were implemented using Elrod's algorithm, which conserves mass flow through the cavitation bubble as well as through the oil-film region of the bearing. The vibration amplitudes for the different cases studied resulted in maximum eccentricity ratios ranging from 0.4 to 0.9. The minimum eccentricity ratio reached in each case was 0.1. For the least vibration amplitude studied in which the eccentricity ratio varied between 0.1 and 0.4, no vapor cavitation occurred. The largest vibration amplitude (i.e., eccentricity ratios of 0.1 to 0.9) resulted in vapor cavitation present 76 percent of one complete orbit.
Turbulent combustion can not be simulated adequately by conventional moment closure turbulence models. The difficulty lies in the fact that the reaction rate is in general an exponential function of the temperature, and the higher order correlations in the conventional moment closure models of the chemical source term can not be neglected, making the applications of such models impractical. The probability density function (pdf) method offers an attractive alternative: in a pdf model, the chemical source terms are closed and do not require additional models. A grid dependent Monte Carlo scheme was studied, since it is a logical alternative, wherein the number of computer operations increases only linearly with the increase of number of independent variables, as compared to the exponential increase in a conventional finite difference scheme. A new algorithm was devised that satisfies a restriction in the case of pure diffusion or uniform flow problems. Although for nonuniform flows absolute conservation seems impossible, the present scheme has reduced the error considerably.
Two low-acceleration transonic-flutter vehicles were launched and flown. The first carried two test wings, one of which fluttered at M = 0.92 at a frequency of 61.4 cycles per second. The reference flutter speed determined from two-dimensional theory for an unswept wing in incompressible flow is conservative when compared to the experimental flutter speed. The second vehicle carried two test wings, one of which failed at M = 0.71 because of low-frequency divergent oscillation. Since this failure was not caused by conventional flexure-torsion flutter, no comparison with a reference flutter speed can be made.
An implicit finite-difference method is presented for obtaining steady-state solutions to the time-dependent, conservative Euler equations for flows containing shocks. The method uses a two-point central difference scheme with dissipation added at supersonic points via the retarded density concept. Application of the method to the one-dimensional nozzle flow equations for various combinations of subsonic and supersonic boundary conditions show the method to be very efficient. Residuals are typically reduced to machine zero in approximately 35 time steps for 50 mesh points. It is shown that the scheme offers certain advantages over the more widely-used three-point schemes, especially in regard to application of boundary conditions.
Recent satellite observations of close binary systems show that practically all binaries exhibit evidence of mass flow and that, where the observations are sufficiently detailed, a fraction of the matter flowing out of the mass-losing component is accreted by the companion and the remainder is lost from the binary system. The mass flow is not conservative. During the phase of dynamic mass flow, the companion star becomes immersed in optically-thick plasma and the physical properties of that star elude close scrutiny.
Mass injection effect on compressible three- dimensional laminar boundary layers analyzed for nonreacting gas, using conservation equations for flow velocity profiles
Numerical experiments show that use of a potential enstrophy conserving scheme drastically improves numerical simulation of flow near steep mountains.
The VANS successive approximation numerical method was extended to the computation of three dimensional, viscous, transonic flows in turbomachines. A cross-sectional computer code, which conserves mass flux at each point of the cross-sectional surface of computation was developed. In the VANS numerical method, the cross-sectional computation follows a blade-to-blade calculation. Numerical calculations were made for an axial annular turbine cascade and a transonic, centrifugal impeller with splitter vanes. The subsonic turbine cascade computation was generated in blade-to-blade surface to evaluate the accuracy of the blade-to-blade mode of marching. Calculated blade pressures at the hub, mid, and tip radii of the cascade agreed with corresponding measurements. The transonic impeller computation was conducted to test the newly developed locally mass flux conservative cross-sectional computer code. Both blade-to-blade and cross sectional modes of calculation were implemented for this problem. A triplet point shock structure was computed in the inducer region of the impeller. In addition, time-averaged shroud static pressures generally agreed with measured shroud pressures. It is concluded that the blade-to-blade computation produces a useful engineering flow field in regions of subsonic relative flow; and cross-sectional computation, with a locally mass flux conservative continuity equation, is required to compute the shock waves in regions of supersonic relative flow.
Abstract A new adaptive clipping‐and‐redistribution method is presented which provides bounds‐preservation for multidimensional interpolation in the context of high‐order finite‐volume discretizations with adaptive mesh refinement (AMR). The underlying finite‐volume method (FVM) for the computational fluid dynamics applications is fourth‐order accurate for smooth solutions and utilizes AMR for computational efficiency in solving multiscale problems involving turbulence and combustion. High‐order interpolation between different AMR levels is required. However, this operation often leads to numerical issues because combustion species must have physical bounds preserved. The present study overcomes two major challenges in the development of the high‐order interpolation method. First, the method needs to be bound‐preserving near extrema or discontinuities to prevent the emergence of unphysical oscillations while maintaining fourth‐order accuracy in smooth flows. Second, the method needs to satisfy the conservation requirement in multiple dimensions, particularly in the context of curvilinear coordinate transformations. Additionally, the method is designed to be localized and computationally inexpensive. The new interpolation scheme is demonstrated by solving reacting flows, which are extremely sensitive to unphysical overshoots in conserved quantities. The test problems are shock‐induced ‐ combustion and a ‐air flame in a practical bluff‐body combustor. Results show the method prevents new extrema near discontinuities while maintaining high‐order accuracy in smooth regions. In particular, the method is extremely beneficial for combustion with stiff chemistry. With the proposed new method, even if flame fronts cross AMR interfaces or new grids are created in the vicinity of the flame, solution stability is retained.
Many irrigated agricultural areas seek to prolong the lifetime of their groundwater resources by reducing pumping. However, it is unclear how lagged responses, such as reduced groundwater recharge caused by more efficient irrigation, may impact the long-term effectiveness of conservation initiatives. Here, we use a variably saturated, simplified surrogate groundwater model to: 1) analyze aquifer responses to pumping reductions, 2) quantify time lags between reductions and groundwater level responses, and 3) identify the physical controls on lagged responses. We explore a range of plausible model parameters for an area of the High Plains Aquifer (USA) where stakeholder-driven conservation has slowed groundwater depletion. We identify two types of lagged responses that reduce the long-term effectiveness of groundwater conservation, recharge-dominated and lateral-flow-dominated, with vertical hydraulic conductivity (K Z ) the major controlling variable. When high K z allows percolation to reach the aquifer, more efficient irrigation reduces groundwater recharge. By contrast, when low K z impedes vertical flow, short term changes in recharge are negligible, but pumping reductions alter the lateral flow between the groundwater conservation area and the surrounding regions (lateral-flow-dominated response). For the modeled area, we found that a pumping reduction of 30% resulted in median usable lifetime extensions of 20 or 25 years, depending on the dominant lagged response mechanism (recharge- vs. lateral-flow-dominated). These estimates are far shorter than estimates that do not account for lagged responses. To conclude, results indicate that conservation-based pumping reductions can extend aquifer lifetimes, but lagged responses can create a sizable difference between the initially perceived and actual long-term effectiveness.
This paper deals with the development of a space-marching method for incompressible flows. The method solves the continuity and momentum equations as a coupled system at each streamwise station. The character of the system of equations has been changed from elliptic to hyperbolic/parabolic in order to enable the equations to be marched in space. The present method has many advantages compared to the existing parabolic or space-marching methods for incompressible flow: (1) it avoids the solution of Poisson equations, (2) it conserves the mass flow with no additional computation, (3) it does not require the specification of an assumed pressure field when used in the prediction of duct flows. The present method can capture strong secondary velocities and strong transverse pressure gradients. Predictions of the flow through straight and curved ducts are in good agreement with analytical and experimental results.