SEARCH · Engineering Papers

Results for “favorability maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Rainfall estimation over oceans from SMMR and SSM/I microwave data

The brightness temperature (T sub b) measured at 37 GHz shows fairly strong emission from rain, and only slight effects caused by scattering by ice above the rain clouds. At frequencies below 37 GHz, where the FOV is larger and the volume extinction coefficient is weaker, it is found that the observations do not yield appreciable additional information about rain. At 85 GHz (FOV = 15 km), where the volume extinction is considerably larger, direct information about rain below the clouds is usually masked. Based on the above idea, 37 GHz observations with a 30 km FOV from SMMR and SSM/I are selected to develop an empirical method for the estimation of rain rate. In this method, the statistics of the observed T sub b's at 37 GHz in a rain storm are related to the rain rate statistics in that storm. The underestimation of rain rate, arising from the inability of the radiometer to respond sensitively to rain rate above a given threshold is rectified in this technique with the aid of two parameters that depend on the total water vapor content in the atmosphere. The retrieved rain rates compare favorably with radar observations and monthly mean global maps of rain derived from this technique over the oceans.

Prabhakara, C.↗

NASA NTRS1990

Initial results in the development of a synthetic aperture microwave radiometer

A radiometer that measures the complex correlation of the voltage from pairs of antennas at many different baselines is being developed. Each baseline produces a sample point in the Fourier transform of the scene, and a map of the scene is obtained after all measurements have been made by inverting the transform. A substantial reduction in the antenna collecting area required compared to a conventional imaging radiometer can be obtained in this manner. An aircraft prototype being developed is a hybrid which uses real aperture antennas to obtain resolution along-track (stick antennas) and uses aperture synthesis to obtain resolution across-track. The prototype was flight-tested aboard the NASA P-3 in June 1988. During this flight a map was made of the Delmarva Peninsula south of NASA's Wallops Flight Facility. This initial map shows the major land/water features and compares very favorably with a Landsat image of the area, suggesting a bright outlook for the development of this technique in the future.

Le Vine, David M.↗

DOE OSTI2023

Double Diffusion Maps and their Latent Harmonics for scientific computations in latent space

In this work, we introduce a data-driven approach to building reduced dynamical models through manifold learning; the reduced latent space is discovered using Diffusion Maps (a manifold learning technique) on time series data. A second round of Diffusion Maps on those latent coordinates allows the approximation of the reduced dynamical models. This second round enables mapping the latent space coordinates back to the full ambient space (what is called lifting); it also enables the approximation of full state functions of interest in terms of the reduced coordinates. In our work, we develop and test three different reduced numerical simulation methodologies, either through pre-tabulation in the latent space and integration on the fly or by going back and forth between the ambient space and the latent space. The data-driven latent space simulation results, based on the three different approaches, are validated through (a) the latent space observation of the full simulation through the Nyström Extension formula, or through (b) lifting the reduced trajectory back to the full ambient space, via Latent Harmonics. Latent space modeling often involves additional regularization to favor certain properties of the space over others, and the mapping back to the ambient space is then constructed mostly independently from these properties; here, we use the same data-driven approach to construct the latent space and then map back to the ambient space.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Report on Mowry Shale Thermal Maturity Mapping in the Powder River Basin, Wyoming

The Enhanced Oil Recovery Institute (EORI) has completed a map of thermal maturity of the Mowry Shale in the Powder River Basin (PRB). Thermal maturity, the degree to which the total organic carbon in a formation has been transformed from kerogen to producible hydrocarbons due to heat and pressure, is an important measure for not just the quality of a source rock, but also helps for delineating areas more favorable for unconventional drilling. There is a dearth of published Mowry maturity maps available for the PRB and this publication endeavors to provide a detailed map based on a large, public data set covering the Wyoming portion of the PRB. Additional data, currently held confidential by operators in the basin, would be of benefit to future iterations of this map.

02 PETROLEUM↗

NASA NTRS1974

Agriculture, forestry, range resources

In the area of crop specie identification, it has been found that temporal data analysis, preliminary stratification, and unequal probability analysis were several of the factors that contributed to high identification accuracies. Single data set accuracies on fields of greater than 80,000 sq m (20 acres) are in the 70- to 90-percent range; however, with the use of temporal data, accuracies of 95 percent have been reported. Identification accuracy drops off significantly on areas of less than 80,000 sq m (20 acres) as does measurement accuracy. Forest stratification into coniferous and deciduous areas has been accomplished to a 90- to 95-percent accuracy level. Using multistage sampling techniques, the timber volume of a national forest district has been estimated to a confidence level and standard deviation acceptable to the Forest Service at a very favorable cost-benefit time ratio. Range specie/plant community vegetation mapping has been accomplished at various levels of success (69- to 90-percent accuracy). However, several investigators have obtained encouraging initial results in range biomass (forage production) estimation and range readiness predictions. Soil association map correction and soil association mapping in new area appear to have been proven feasible on large areas; however, testing in a complex soil area should be undertaken.

Crea, W. J.↗

NASA NTRS2012

Behavioral Mapless Navigation Using Rings

This paper presents work on the development and implementation of a novel approach to robotic navigation. In this system, map-building and localization for obstacle avoidance are discarded in favor of moment-by-moment behavioral processing of the sonar sensor data. To accomplish this, we developed a network of behaviors that communicate through the passing of rings, data structures that are similar in form to the sonar data itself and express the decisions of each behavior. Through the use of these rings, behaviors can moderate each other, conflicting impulses can be mediated, and designers can easily connect modules to create complex emergent navigational techniques. We discuss the development of a number of these modules and their successful use as a navigation system in the Trinity omnidirectional robot.

Monroe, Randall P.↗

NASA NTRSDate not supplied

Hail Storm Risk Assessment Using Space-Borne Remote Sensing Observations and Reanalyses

Much of the world is impacted by severe thunderstorms, but whether they become disasters depends upon resilience--our capacity to prepare, mitigate, respond, and recover. Hail is the costliest severe weather hazard for the insurance industry, generating ~70% of severe convective storm losses due to damage to assets such as homes, businesses, agriculture, and infrastructure. Most insurance companies do not reserve enough capital to cover catastrophes, so they acquire reinsurance. The reinsurance industry uses catastrophe models (CatModels) to statistically estimate risk to an insurer’s portfolio. Hail CatModels are developed with climatologies that define hailstorm frequency and severity. Hail-prone areas can be defined using hail reports from trained spotters, the media, and the general public. Extremely severe hail (2+ inch diameter) occurs nearly every day across the world. Weather radars can detect hail because hailstones strongly reflect microwave signals that they emit. However, hail climatologies are difficult to derive because hail covers small areas and there are neither hail reporting mechanisms (e.g. website or mobile app) nor radar networks in most places outside the US and Europe. This lack of ground truth on severe hail puts society and economies at risk. Hail is generated within storms by strong updrafts. These updrafts exhibit unique signatures in NASA and other agency satellite observations, offering new opportunities for hailstorm analysis. Geostationary (GEO) visible and infrared imagery has been collected for ~15-25 years across the world (region dependent) and methods have been developed at NASA Langley Research Center (LaRC) to detect hailstorm updrafts using GEO imagery. Climatological GEO updraft data has been used by Willis Towers Watson (WTW), a leader in catastrophe risk assessment for the insurance industry, and Karlsruhe Institute of Technology to develop CatModels over Europe and Australia. Hail can also be inferred with passive microwave imagery collected by low-Earth-orbiting sensors such as the GPM GMI, TRMM TMI, AMSR-E, AMSR-2, SSM/I, and SSMIS over the last 20+ years using methods developed at the Marshall Space Flight Center (MSFC). Hailstorms generate enhanced lightning flash rates that can be tracked using new GOES-R series GEO Lightning Mapping (GLM) imagery. Atmospheric reanalyses can be used to define favorable hailstorm environments for combination with the satellite-based storm detections. This presentation will describe a framework for developing continental to global hail climatologies and CatModels based on NASA satellite data and capabilities. This is a collaboration between LaRC and MSFC, WTW, and partners in Brazil, Argentina, and South Africa. This project seeks to mitigate hail disasters by aiding development of new satellite-based severe storm nowcasting tools by regional partners and developing climatologies to improve societal understanding of hail frequency. GEOO visible and infrared metrics of storm intensity, environmental conditions based on reanalyses, spotter hail reports and radar MESH observations are intercompared to quantify the detectability of hailstorms, and our ability to discriminate hailstorms from other severe storms. We are also maturing methods using land surface imaging satellite data (e.g. MODIS, Landsat, Sentinel 1 and 2) to identify hail damage to agriculture. Work with WTW will improve socioeconomic resilience through development of new CatModels. Southern Brazil, Uruguay, Paraguay, and Argentina feature some of the most intense thunderstorms on Earth. South America and South Africa are developing insurance markets of interest to WTW clients, and is similar to other regions routinely impacted by hail that do not have comprehensive hail reporting or radars to assess hailstorm frequency. Project datasets will be made available via online GIS-enabled tools developed at the LaRC Atmospheric Science Data Center (ASDC) which will visualize data and provide it in multiple formats for use in a wide range of open source and commercial tools.

Kristopher Michael Bedka↗

DOE OSTI2021

Report on Mowry Shale Thermal Maturity Mapping in the Powder River Basin, Wyoming

58 GEOSCIENCES↗

NASA NTRS1983

Petrologic model of the northern Mississippi embayment based on satellite magnetic and ground based geophysical data

Magnetization, derived from gravity-seismic data from the northern Mississippi Embayment, is evaluated relative to magnetization values obtained from satellite magnetic data. A magnetization contrast of approximately -0.54 A/m determined from the geophysical model compares favorably to a value of approximately -0.47 A/m from MAGSAT United States Apparent Magnetization contrast map. The negative magnetization contrast, required by the MAGSAT data, is unusual as rift zones with the exception of those which are currently active are associated with positive magnetization. The model presented favors an intrusion of low Curie temperature mafic rock at the base of the crust. Alternate possibilities, a shallow Curie isotherm or remanence in a direction other than that of the current main field, seem less likely as reported regional heat flow values are too low and remanence is attenuated at depth.

Thomas, H. H.↗

DOE OSTI2024

Assessing the Viability of Geothermal Microgrid Deployment: A Geospatial Analysis Across the United States

Geothermal microgrids hold a potential of supplying clean and dependable power to communities throughout the United States (US), all while sidestepping the expenses associated with connecting to strained or isolated power grids. Nonetheless, their implementation is still in its early stages in the country. The objective of this analysis is to leverage available data to pinpoint regions across the US that exhibit favorable conditions for the development of geothermal microgrids. Drawing from a variety of sources, including estimates of geothermal resources, the costs associated with geothermal energy generation and electricity transmission, existing microgrid locations, and subsidy programs, we aim to identify promising areas for further exploration. By mapping out the contiguous US, Alaska, and Hawaii, we delineate regions with high relative favorability for geothermal microgrid deployment. Our findings reveal the presence of highly favorable regions across the Western states of the contiguous US, as well as isolated areas in Alaska and Hawaii. Furthermore, we delve into a discussion on state policies and incentive programs, considering their role in fostering favorable conditions or posing barriers to geothermal microgrid development.

Alaska↗

NASA NTRS2016

Atmospheric Drivers of Greenland Surface Melt Revealed by Self-Organizing Maps

Recent acceleration in surface melt on the Greenland ice sheet (GrIS) has occurred concurrently with a rapidly warming Arctic and has been connected to persistent, anomalous atmospheric circulation patterns over Greenland. To identify synoptic setups favoring enhanced GrIS surface melt and their decadal changes, we develop a summer Arctic synoptic climatology by employing self-organizing maps. These are applied to daily 500 hPa geopotential height fields obtained from the Modern Era Retrospective Analysis for Research and Applications reanalysis, 1979-2014. Particular circulation regimes are related to meteorological conditions and GrIS surface melt estimated with outputs from the Modèle Atmosphérique Régional. Our results demonstrate that the largest positive melt anomalies occur in concert with positive height anomalies near Greenland associated with wind, temperature, and humidity patterns indicative of strong meridional transport of heat and moisture. We find an increased frequency in a 500 hPa ridge over Greenland coinciding with a 63% increase in GrIS melt between the 1979-1988 and 2005-2014 periods, with 75.0% of surface melt changes attributed to thermodynamics, 17% to dynamics, and 8.0% to a combination. We also confirm that the 2007-2012 time period has the largest dynamic forcing relative of any period but also demonstrate that increased surface energy fluxes, temperature, and moisture separate from dynamic changes contributed more to melt even during this period. This implies that GrIS surface melt is likely to continue to increase in response to an ever warmer future Arctic, regardless of future atmospheric circulation patterns.

anomalies↗

NASA NTRS2020

Automated Identification and Differentiation of Spectrally Similar Hydrothermal Minerals on Mars

Early telescopic observations corroborated hydration related absorptions on Mars in the infrared. Images from the Viking missions led to speculation of hydrothermal alteration and were followed by two missions which mapped the spatial variability of the ~ 3 μm hydration feature. Since then, the Compact Reconnaissance Imager for Mars (CRISM) has provided high spatial resolution (up to 18m) spectral identification of a suite of hydrothermal and diagenetic minerals which have illuminated a range of formation mechanisms. Presence/absence and spatial segregation or mixing of minerals like prehnite, epidote, chlorite amphiboles, and mixed-layer Fe/Mg smectite-chlorite provide valuable evidence for the geologic setting of deposits on Earth, and these phases are often used as temperature and aqueous chemistry indicators in terrestrial systems. Mapping the distribution of these phases will help to answer whether Mars had widespread conditions favorable for low-grade metamorphism and diagenesis, or only focused hydrothermal systems in areas of high heat flow. Further characterizing the chemistry and structure of these phases will then help to answer how most of the widespread Fe/Mg phyllosilicates formed, further defining early geochemical cycling and climate. A fully automated approach for accurate mapping of important hydrothermal mineral phases on Mars has been a challenge. Due to overlapping features in the M-OH region (~2.2-2.4 μm), the strongest absorption features of chlorite, prehnite, and epidote in the short-wave infrared are difficult to distinguish from one another and from the most commonly occurring hydrated silicates on Mars, Fe/Mg smectites. Weaker absorptions are present in both prehnite and epidote which help to distinguish them from chlorite and smectites, but their relative strength in the presence of noise and spatial mixing is often too low to confidently identify them without the noise suppression and feature enhancement methods described here. The spectral signatures of mixed-layer Fe/Mg smectite-chlorite and partially chloritized Fe/Mg smectites have not yet been adequately assessed. Here we evaluate the effectiveness of two empirical and statistical methods for identifying and differentiating these phases using CRISM data.

Rasmussen, B. P.↗

DOE OSTI2023

Three‐Dimensional Broadband Interferometric Mapping and Polarization (BIMAP‐3D) Observations of Lightning Discharge Processes

Abstract Following on our earlier single‐station, 2‐dimensional (2D) broadband interferometric mapping and polarization (BIMAP) observations of lightning discharges, we recently deployed two BIMAP stations at Los Alamos National Laboratory to map the lightning sources and their polarization in full 3‐dimensional (3D) space (BIMAP‐3D). The two stations are separated by 11.5‐km and each station consists of four antenna sets (instead of three for the original BIMAP) that form a Y ‐shaped array for improved interferometric performance. In this paper, we report the BIMAP‐3D system design, a generalized and analytical 2D interferometry technique for noncoplanar antenna array, a two‐stage 3D mapping technique based on geometric triangulation and baseline‐based differential time of arrival, and a technique to reconstruct the polarization orientation in 3D space by combining the 2D polarization results from the two‐station observations. Along with description of the techniques, we demonstrate and discuss the initial lightning results, including 3D maps for a hybrid intracloud and cloud‐to‐ground flash and for a normal intracloud flash, development of abnormal K‐change leaders, and polarization signatures for a K‐change leader. We find that with the two‐stage 3D mapping techniques, the sources can be located to meters accuracy for a favorable event that occurs between the two stations. We also find the polarization vectors for the example K leader are mostly orthogonal to the leader channel after the full 3D polarization analysis. The main purpose of this paper is to report the BIMAP‐3D techniques and capabilities. Detailed analysis of more specific discharge processes will be reported in later studies.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1993

Estimating chlorophyll content and bathymetry of Lake Tahoe using AVIRIS data

Data on chlorophyll content and bathymetry of Lake Tahoe obtained on August 9, 1990 by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) are compared to concurrent in situ surface and in-water measurements. Measured parameters included profiles of percent transmission of monochromatic light, stimulated chlorophyll fluorescence, photosynthetically available radiation, spectral upwelling and downwelling irradiance, and upwelling radiance. Several analyses were performed illustrating the utility of the AVIRIS over a dark water scene. Image-derived chlorophyll concentration compared extremely well with that measured with bottle samples. A bathymetry map of the shallow parts of the lake was constructed which compares favorably with published lake soundings.

Hamilton, Michael K.↗

NASA NTRS1998

An Evanescent Microwave Probe for Super-Resolution Nondestructive Imaging of Metals, Semiconductors, Dielectrics, Composites and Biological Specimens

Using evanescent microwaves with decay lengths determined by a combination of microwave wavelength (lambda) and waveguide termination geometry, we have imaged and mapped material non-uniformities and defects with a resolving capability of lambda/3800=79 microns at 1 GHz. In our method a microstrip quarter wavelength resonator was used to generate evanescent microwaves. We imaged materials with a wide range of conductivities. Carbon composites, dielectrics (Duroid, polymers), semiconductors (3C-SiC, polysilicon, natural diamond), metals (tungsten alloys, copper, zinc, steel), high-temperature superconductors, and botanical samples were scanned for defects, residual stresses, integrity of brazed junctions, subsurface features, areas of different film thickness and moisture content. The evanescent microwave probe is a versatile tool and it can be used to perform very fast, large scale mapping of a wide range of materials. This method of characterization compares favorably with ultrasound testing, which has a resolution of about 0.1 mm and suffers from high absorption in composite materials and poor transmission across boundaries. Eddy current methods which can have a resolution on the order of 50 microns are restricted to evaluating conducting materials. Evanescent microwave imaging, with careful choice of operating frequency and probe geometry, can have a resolution of up to 1 micron. In this method we can scan hot and moving objects, sample preparation is not required, testing is non-destructive, non-invasive and non-contact, and can be done in air, in liquid or in vacuum.

Pathak, P. S.↗

DOE OSTI2023

Back in bismuth: controlling triplet energy transfer, phosphorescence, and radioluminescence via supramolecular interactions

Five bismuth(III)-organic phases that consist of supramolecular assemblies of Bi-2,6-pyridinedicarboxylate structural units and substituted 1,10-phenanthroline molecules (R-Phen; R = H, 5-methyl, 5-chloro, 2,9-dimethyl, and 2,9-dicholoro) were synthesized. All five compounds exhibited solid-state photoluminescence. Whereas the phases containing 2,9-dimethylphenanthroline (Me 2 Phen) and 2,9-dichlorophenanthroline (Cl 2 Phen) displayed solely phosphorescence, the structures built from 5-methylphenanthroline and 5-chlorophenanthroline showed exclusively fluorescence. The remaining phase, consisting of phenanthrolinium, exhibited both fluorescence and phosphoresence. It was determined that phosphorescence arises from triplet state emission (T 1 → S 0 ) of substituted R-Phen units while fluorescence originates from Bi(III) coordinated pyrdinedicarboxylate ligands. Bismuth induces spin–orbit coupling for triplet state population and additionally acts as a heavy metal attenuator for X-ray luminescence (radioluminescence). The electronic structure was mapped and excitation pathway investigated via density functional theory calculations. Computational findings indicate favorable conditions for triplet energy transfer from donor Bi(III)-organic units to acceptor R-Phen derivatives. It is proposed that for the phosphorescent compounds, strong π–π interactions promote electron transfer, whereas the compounds that exhibit purely fluorescence lack any such π–π interactions and undergo triplet energy transfer. In conclusion, these results provide a useful platform for probing structure–property relationships of luminescent bismuth-organic compounds, and specifically highlights the role of noncovalent interactions in achieving room temperature phosphorescence and radioluminescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1992

Sea bottom topography imaging with SAR

It is well known that under favorable meteorological and hydrodynamical conditions the bottom topography of shallow seas can be mapped with airborne or spaceborne imaging radar. This phenomenon was observed for the first time in 1969 by de Loor and co-workers in Q-band Side Looking Airborne Radar (SLAR) imagery of sandwaves in the North Sea. It is now generally accepted that the imaging mechanism consists of three steps: (1) interaction between (tidal) current and bottom topography causes spatial modulations in the surface current velocity; (2) modulations in the surface current velocity give rise to variations in the spectrum of wind-generated waves, as described by the action balance equation; and (3) variations in the wave spectrum show up as intensity modulations in radar imagery. In order to predict radar backscatter modulations caused by sandwaves, an imaging model, covering the three steps, was developed by the Dutch Sea Bottom Topography Group. This model and some model results will be shown. On 16 Aug. 1989 an experiment was performed with the polarimetric P-, L-, and C-band synthetic aperture radar (SAR) of NASA/JPL. One scene was recorded in SAR mode. On 12 Jul. 1991 another three scenes were recorded, of which one was in the ATI-mode (Along-Track Interferometer). These experiments took place in the test area of the Sea Bottom Topography Group, 30 km off the Dutch coast, where the bottom topography is dominated by sand waves. In-situ data were gathered by a ship in the test area and on 'Measuring Platform Noordwijk', 20 km from the center of the test area. The radar images made during the experiment were compared with digitized maps of the bottom. Furthermore, the profiles of radar backscatter modulation were compared with the results of the model. During the workshop some preliminary results of the ATI measurements will be shown.

Vanderkooij, M. W. A.↗

NASA NTRS1973

An orbital radar mapper of Venus in the 1980's - Mission design and analysis

A reasonable approach to the examination of Venus topography, obscured for photographic imaging, is available in the application of airborne radar mapping systems to an orbiter mission about the planet. Extrapolating the improving capabilities of earth-based radar study of Venus into the 1980's suggests that only a non-uniform, poorly resolved surface profile will be possible relative to the potential for 100% coverage at 100 meter resolution with an orbital radar. The intent of this paper is to define mission opportunities favorable for a Venus orbital mapper during the 1980's, to examine orbit design problem associated with mapping radar systems, to establish what flexibility exists for an adaptive mapping strategy, to contribute to the sizing of particular spacecraft systems, to suggest a reference mission design and demonstrate mission feasibility.

Asnin, S. K.↗