Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic structure calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Data for "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid"

This repository contains source data for key plots presented in the manuscript "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid." Experimental data that was analyzed in Igor Pro 8 are presented as the .pxp files used to generate individual sub-plots. Electronic spectral function calculations are provided as .txt files, in which consecutive rows refer to the meshgrid x coordinate, y coordinate, spectral function (and, where relevant, axis-projected local angular momentum). We additionally include the Wannier model and DFT-obtained bulk band structure on which the Wannier model was based. Files are named as the number of the figure in the manuscript to which they correspond, with additional details included where necessary. Details of file names: 2a_DOS_Lxz_Ek_KGM_40layer_xnum_800kpt_tot.txt: Density of states, xz-axis projected local orbital angular momentum, for 800 points along the K-Gamma-M path, for a 40-layer model. 2c_composite_y.pxp: ARPES (angle-resolved photoemission spectroscopy) spectra along the ky axis, including both a scan near the Fermi level and a scan at high kinetic energies. 2d_LCP_RCP_diff_Sect_20K.pxp: difference between ARPES constant energy cuts at T=20 K at E0 + 0.23 eV taken with left- and right-circularly polarized photons. The polarization-integrated intensity at the constant energy cut is also included. 2e_DOS_L45_E11pt79_m0pt25to0pt25_xnum_800kpt_tot.txt: Density of states, xz-projected local orbital angular momentum, and corresponding k-points in two dimensions from ab-initio electronic structure calculations for a constant-energy cut. 3a_[x]_[y]ps: ARPES cut under excitation at a fluence of x uJ/cm2, measured y ps after photoexcitation. Measurements were performed at 9 K. 3b_[x]: Energy distribution curves under excitation at a fluence x uJ/cm2 at selected delay times after photoexcitation. 4a_ImSigma_vs_temperature.pxp: Imaginary self energy (extracted from ARPES linewidths) at different energies above E0 for selected lattice temperatures. 4b_EELS_lowE.pxp: Electron energy loss spectrum over a low energy range 5b_diff_55m15.pxp: Difference between momentum-integrated Tr-ARPES traces at 55 uJ/cm2 and 15 uJ/cm2 photoexcitation. Time-dependent intensity at each energy level has been normalized to a maximum of 1 for each individual fluence prior to subtraction. 5d_invtau_at_EX_vs_fluence.pxp: decay rate at a specified energy EX for different excitation fluences, from single exponential fits. NOTE: Analyses based on the Wannier model presented here should cite both the associated Article and this dataset. For all other files in the repository, citing the dataset alone is sufficient.

Acharya, Rishi [University of Illinois] (ORCID:000↗
NASA NTRS1994

Equilibrium and Dynamics Properties of Poly(oxyethylene) Melts and Related Poly(alkylethers) from Simulations and Ab Initio Calculations

Molecular dynamics simulations of POE melts have been performed utilizing a potential force field parameterized to reproduce conformer energies and rotational energy barriers in dimethoxyethane as determined from ab initio electronic structure calculations. Chain conformations and dimensions of POE from the simulations were found to be in good agreement with predictions of a rotational isomeric state (RIS) model based upon the ab initio conformational. energies. The melt chains were found to be somewhat extended relative to chains at theta conditions. This effect will be discussed in light of neutron scattering experiments which indicate that POE chains are extended in the melt relative to theta solutions. The conformational characteristics of POE chains will also be compared with those of other poly (alkylethers), namely poly(oxymethylene), poly(oxytrimethylene) and poly(oxytetramethylene). Local conformational dynamics were found to be more rapid than in polymethylene. Calculated C-H vector correlation times were found to be in reasonable agreement with experimental values from C-13 NMR spin-lattice relaxation times. The influence of ionic salts on local conformations and dynamics will also be discussed.

Smith, Grant D.↗
DOE OSTI2025

Energetic and Electronic Properties of UX +/0/– for X = Li and Be and Comparison of the Properties of the Uranium Atom Binding to 2nd Row Elements Li–F

The bonding and spectroscopic properties of ULi +/0/– and UBe +/0/– to complete the series for UX +/0/– for X = Li to F were investigated by high-level ab initio SO-CASPT2 and CCSD(T) electronic structure calculations. The low-lying spin–orbit states were obtained at the SA-CASPT2/aQ-PP level; bond dissociation energies (BDEs), ionization energies (IEs), adiabatic electronic affinities (AEAs), and vertical detachment energies (VDEs) were calculated at the Feller-Peterson-Dixon (FPD) level. A dense manifold of low-lying states was predicted for ULi +/0/– and UBe +/0/– . Here, the calculated BDEs for ULi (37.7 kJ/mol) and UBe (8.0 kJ/mol) show that UBe is weakly bound. For redox processes, the BDEs increased for ULi + (109.3 kJ/mol), ULi – (47.4 kJ/mol), UBe + (35.6 kJ/mol), and UBe – (72.3 kJ/mol). The IE(ULi) = 4.650 eV is lower than IE(Li); the IE(UBe) = 5.901 eV is close to the IE(U) and to the IEs of UB, UC, UN, UO, and UF. The AEAs of ULi (0.708 eV) and UBe (0.989 eV) are lower than those for UB, UC, UN, and UO but higher than that for EA(UF). Natural bond orbital (NBO) calculations show that ULi has the 5f 3 6d 1 7s 2 configuration for U and 2s 1 for Li, with a small partial negative charge slightly delocalized on U. UBe arises from the U(5f 3 6d 1 7s 2 ) and Be(2s 2 ) electron configurations with no charge separation. The same calculations were made for WX (X = Li, Be, C–F) to enable detailed comparisons of the properties for UX with WX (X = Li–F). For WX, BDE(WX) is higher than that for UX for X = Li to N and lower than BDE(UX) for X = O and F, mostly due to the higher IE of W than U as ionic character becomes more important going from Li to F.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

First-principles investigation of elastic, vibrational, and thermodynamic properties of kagome metals CsM 3 Te 5 (M = Ti, Zr, Hf)

Kagome metals are a unique class of quantum materials characterized by their distinct atomic lattice arrangement, featuring interlocking triangles and expansive hexagonal voids. These lattice structures impart exotic properties, including superconductivity, interaction-driven topological many-body phenomena, and magnetism, among others. The kagome metal CsM 3 ⁢Te 5 (where M = Ti, Zr, or Hf) exhibits both superconductivity and nontrivial topological electronic properties, offering a promising platform for exploring topological superconductivity. This study employs first-principles density functional theory calculations to systematically analyze the elastic, mechanical, vibrational, thermodynamic, and electronic properties of CsM 3 ⁢Te 5 (M = Ti, Zr, Hf). Our calculations reveal that the studied compounds—CsTi 3 ⁢Te 5 , CsZr 3 ⁢Te 5 , and CsHf 3 ⁢Te 5 —are ductile metals with elastic properties akin to the hexagonal Bi and Sb, with average elastic constants, including a bulk modulus of 27 GPa, a shear modulus of 11 GPa, and Young's modulus of 29 GPa. We observe peculiar dispersionless, flat, phonon branches in the vibrational spectra of these metals. Additionally, we thoroughly analyze the symmetries of the zone-center phonon eigenvectors and predict vibrational fingerprints of the Raman- and infrared-active phonon modes. The analysis of thermodynamic properties reveals the Einstein temperature for CsTi 3 ⁢Te 5 , CsZr 3 ⁢Te 5 , and CsHf 3 ⁢Te 5 to be 66, 54, and 53 K, respectively. Our orbital-decomposed electronic structure calculations reveal significant in-plane steric interactions and multiple Dirac band crossings near the Fermi level. We further investigate the role of spin-orbit coupling effect on the studied properties. Furthermore, this theoretical investigation sheds light on the intriguing quantum behavior of kagome metals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Efficient exact exchange using Wannier functions and other related developments in planewave-pseudopotential implementation of RT-TDDFT

The plane-wave pseudopotential (PW-PP) formalism is widely used for the first-principles electronic structure calculation of extended periodic systems. The PW-PP approach has also been adapted for real-time time-dependent density functional theory (RT-TDDFT) to investigate time-dependent electronic dynamical phenomena. In this work, we detail recent advances in the PW-PP formalism for RT-TDDFT, particularly how maximally localized Wannier functions (MLWFs) are used to accelerate simulations using the exact exchange. We also discuss several related developments, including an anti-Hermitian correction for the time-dependent MLWFs (TD-MLWFs) when a time-dependent electric field is applied, the refinement procedure for TD-MLWFs, comparison of the velocity and length gauge approaches for applying an electric field, and elimination of long-range electrostatic interaction, as well as usage of a complex absorbing potential for modeling isolated systems when using the PW-PP formalism.

Chemistry↗
DOE OSTI2026

Charge Transport in Solvated Donor–Acceptor Functionalized Peptoids: Molecular Dynamics and Rate Theory

Scalable solar-energy conversion requires photoactive materials that combine the efficiency of natural photosynthetic systems with the stability and processability needed for practical applications. Achieving reliable charge transport in soft, self-assembled organic materials remains challenging, as structural fluctuations and environmental effects strongly influence charge-transfer (CT) rates. Here, we present a broadly applicable computational framework for evaluating CT rates in the condensed phase, combining Fermi’s golden rule rate theory with inputs from all-atom molecular dynamics (MD) simulations and first-principles electronic-structure calculations. The approach does not rely on system-specific parametrization and is applicable to a wide range of soft and disordered materials. We demonstrate the applicability and usefulness of the framework on redox-active peptoids functionalized with iron–porphyrin (Fe–P) complexes, a bioinspired platform with programmable donor–acceptor units and tunable three-dimensional organization. The calculated CT rates exhibit strong sensitivity to molecular conformation, with variations spanning several orders of magnitude. This dependence is shown to arise from the pronounced variation in diabatic electronic coupling with the relative orientations and separations of the Fe–P complexes across the conformational ensemble. The framework provides a consistent route for connecting atomistic structure to CT kinetics in the condensed phase and enables analysis of structure–rate relations in organic semiconducting systems.

Charge transfer↗
DOE OSTI2025

Symmetry breaking as predicted by a phase space Hamiltonian with a spin Coriolis potential

Here, we perform electronic structure calculations for a set of molecules with degenerate spin-dependent ground states ( 3 CH 2 , 2 CH$^{•}_{3}$, 3 O 2 ) going beyond the Born–Oppenheimer approximation and accounting for nuclear motion. According to a phase space approach that parameterizes electronic states (|Φ⟩) and electronic energies (E) by nuclear position and momentum [i.e., |Φ(R, P)⟩ and E(R, P)], we find that the presence of degenerate spin degrees of freedom leads to broken symmetry ground states. More precisely, rather than a single degenerate minimum at (R, P) = (R min , 0), the ground state energy has two minima at (R,P)=(R' min ,±P min ) (where R' min is close to R min ), dramatically contradicting the notion that the total energy of the system can be written in separable form as E = $\frac{P^2}{2M}$ + V el . Although we find that the broken symmetry solutions have small barriers between them for the small molecules, we hypothesize that the barriers should be macroscopically large for metallic solids, thus offering up a new phase-space potential energy surface for simulating the Einstein–de Haas effect.

Berry connection↗
NASA NTRS1988

Calculations of rate constants for the three-body recombination of H2 in the presence of H2

A new global potential energy hypersurface for H2 + H2 is constructed and quasiclassical trajectory calculations performed using the resonance complex theory and energy transfer mechanism to estimate the rate of three body recombination over the temperature range 100 to 5000 K. The new potential is a faithful representation of ab initio electron structure calculations, is unchanged under the operation of exchanging H atoms, and reproduces the accurate H3 potential as one H atom is pulled away. Included in the fitting procedure are geometries expected to be important when one H2 is near or above the dissociation limit. The dynamics calculations explicitly include the motion of all four atoms and are performed efficiently using a vectorized variable-stepsize integrator. The predicted rate constants are approximately a factor of two smaller than experimental estimates over a broad temperature range.

Schwenke, David W.↗
NASA NTRS1988

Calculations of rate constants for the three-body recombination of H2 in the presence of H2

A new global potential energy hypersurface for H2 + H2 is constructed and quasiclassical trajectory calculations performed using the resonance complex theory and energy transfer mechanism to estimate the rate of three body recombination over the temperature range 100 to 5000 K. The new potential is a faithful representation of ab initio electron structure calculations, is unchanged under the operation of exchanging H atoms, and reproduces the accurate H3 potential as one H atom is pulled away. Included in the fitting procedure are geometries expected to be important when one H2 is near or above the dissociation limit. The dynamics calculations explicitly include the motion of all four atoms and are performed efficiently using a vectorized variable-stepsize integrator. The predicted rate constants are approximately a factor of two smaller than experimental estimates over a broad temperature range.

Schwenke, David W.↗
DOE OSTI2025

Computational Study of Indium Oxide Photoelectrodes

Using a combination of first-principles molecular dynamics simulations and electronic structure calculations, we characterize the atomistic structure and vibrational properties of a photocatalytic surface of In 2 O 3 , a promising photoelectrode for the production of hydrogen peroxide. We then investigate the surface in contact with water and show that the electronic states of In 2 O 3 are appropriately positioned in energy to facilitate the two-electron water oxidation reaction (WOR) over the competing four-electron oxygen evolution reaction. In conclusion, we further propose that the use of strained thin films interfaced with water is beneficial in decreasing the optical gap of In 2 O 3 and thus in utilizing a wider portion of the solar spectrum for the WOR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advancing simulations of coupled electron and phonon nonequilibrium dynamics using adaptive and multirate time integration

Electronic structure calculations in the time domain provide a deeper understanding of nonequilibrium dynamics in materials. The real-time Boltzmann equation (rt-BTE), used in conjunction with accurate interactions computed from first principles, has enabled reliable predictions of coupled electron and lattice dynamics. However, the timescales and system sizes accessible with this approach are still limited, with two main challenges being the different timescales of electron and phonon interactions and the cost of computing collision integrals. As a result, only a few examples of these calculations exist, mainly for two-dimensional (2D) materials. Here we leverage adaptive and multirate time integration methods to achieve a major step forward in solving the coupled rt-BTEs for electrons and phonons. Relative to conventional (non-adaptive) time-stepping, our approach achieves a 10x speedup for a target accuracy, or greater accuracy by 3–6 orders of magnitude for the same computational cost, enabling efficient calculations in both 2D and bulk materials. This efficiency is showcased by computing the coupled electron and lattice dynamics in graphene up to ~100 ps, as well as modeling ultrafast lattice dynamics and thermal diffuse scattering maps in bulk materials (silicon and gallium arsenide). In addition to improved efficiency, our adaptive method can resolve the characteristic rates of different physical processes, thus naturally bridging different timescales. This enables simulations of longer timescales and provides a framework for modeling multiscale dynamics of coupled degrees of freedom in matter. Our work opens new opportunities for quantitative studies of nonequilibrium physics in materials, including driven lattice dynamics with phonons coupled to electrons, spin, and other degrees of freedom.

Yao, Jia [California Institute of Technology (CalT↗
NASA NTRS2012

Bound-free Spectra for Diatomic Molecules

It is now recognized that prediction of radiative heating of entering space craft requires explicit treatment of the radiation field from the infrared (IR) to the vacuum ultra violet (VUV). While at low temperatures and longer wavelengths, molecular radiation is well described by bound-bound transitions, in the short wavelength, high temperature regime, bound-free transitions can play an important role. In this work we describe first principles calculations we have carried out for bound-bound and bound-free transitions in N2, O2, C2, CO, CN, NO, and N2+. Compared to bound ]bound transitions, bound-free transitions have several particularities that make them different to deal with. These include more complicated line shapes and a dependence of emission intensity on both bound state diatomic and atomic concentrations. These will be discussed in detail below. The general procedure we used was the same for all species. The first step is to generate potential energy curves, transition moments, and coupling matrix elements by carrying out ab initio electronic structure calculations. These calculations are expensive, and thus approximations need to be made in order to make the calculations tractable. The only practical method we have to carry out these calculations is the internally contracted multi-reference configuration interaction (icMRCI) method as implemented in the program suite Molpro. This is a widely used method for these kinds of calculations, and is capable of generating very accurate results. With this method, we must first of choose which electrons to correlate, the one-electron basis to use, and then how to generate the molecular orbitals.

Schwenke, David W.↗
DOE OSTI2024

Exploring direct photodetachment and photodissociation–photodetachment dynamics of platinum iodide anions (PtI n - , n = 2–5) using cryogenic photoelectron spectroscopy

The direct photodetachment and two-photon photodissociation–photodetachment processes of a series of PtI n - (n = 2–5) anions were systematically studied using cryogenic anion photoelectron spectroscopy and first-principles electronic structure calculations. The adiabatic/vertical detachment energies (ADEs/VDEs) of these anions were determined from their 193 nm photoelectron (PE) spectra, i.e., 3.54/3.63, 4.04/4.09, 4.33/4.36, and 4.37/4.41 eV for n = 2–5, respectively, and well reproduced by B3LYP-D3(BJ)/aug-cc-pVTZ-pp calculations. As the coordination number increases, the electron affinity (EA) of PtI n • (n = 2–5) neutrals (equivalent to the corresponding anion’s ADE) gradually increases, exceeding the EA of Cl at n = 3 and exhibiting superhalogen characteristics for n ≥ 3. Meanwhile, the ground state transition contributed from detaching electrons in the highest occupied molecular orbital gradually evolves from the central metal Pt to the iodine ligands. For the PtI 3 - anion, besides one-photon direct detachment, four distinct two-photon photodissociation–photodetachment channels were identified, and the competition between them was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Intrachain Electron Transport in a Naphthalene Diimide–Bithiophene Copolymer: A Mixed-Valence Approach

The mechanism of electron transport in the polymer P(NDI2OD-T2) (poly(N,N'-bis-2-octyldodecylnaphthalene-1,4,5,8-bis-dicarboximide-2,6-diyl-alt-2,2'-bithiophene-5,5'-diyl), N2200) is investigated. Here, we use spectroelectrochemical measurements on P(NDI2OD-T2), spectroscopic studies of a chemically reduced model compound, 2,2'-(2,2'-bithiophene-5,5'-diyl)-bis(N,N'-di-n-hexylnaphthalene-1,8:4,5-bis(dicarboximide)) (NDI-T2-NDI), and electronic structure calculations to evaluate the microscopic charge-transport parameters. Experimental and computational data suggest that NDI-T2-NDI•– is a class-II mixed-valence compound, strongly supporting the small-polaron hopping model as a charge-transport mechanism for electrons along polymer chains in P(NDI2OD-T2). The electronic coupling between the NDI redox units is at least 21 meV, while the reorganization energy is between 0.45 and 0.56 eV. Using a hopping model, we estimated the mobility and activation energy for electron transport along P(NDI2OD-T2) polymer chains to be 0.15 cm 2 V –1 s –1 and 60 meV, respectively. Our study elucidates a long-standing issue of explaining the coexistence in P(NDI2OD-T2) of localized redox sites with relatively large electron mobilities more usually achieved only in highly conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Zintl pnictides Yb10CdSb9 and Yb14CdSb11: New candidate thermoelectric materials

The synthesis of new materials is the lifeline of solid-state science, and it continues to offer us unique opportunities for testing various theoretical formulations and models on a practical material. Such an avenue, therefore, provides a breeding ground for technological innovations and advancements that can completely revolutionize our world. Here, we report the results of our exploratory syntheses in the Yb–Cd–Sb compositional space that lead to the identification of two new Zintl antimonides, namely, Yb10CdSb9 and Yb14CdSb11. Their crystal structures were established via single-crystal X-ray diffraction methods; the basic electronic and transport properties of the new materials were also characterized. Yb10CdSb9 crystallizes in a disordered variant of the tetragonal Ca10LiMgSb9 structure type with unit cell parameters a = 11.8473(8) Å and c = 17.1302(12) Å (space group P42/mnm). Yb14CdSb11 crystallizes in the tetragonal Ca14AlSb11 structure type with unit cell parameters: a = 16.605(3) Å and c = 12.144(7) Å (space group I41/acd). Although the structures of both compounds can be rationalized within the framework of the Zintl formalism, based on the partitioning of the valence electrons in the much disordered Yb10CdSb9 phase, the charge is indicative of a slightly electron-rich composition. Electronic structure calculations in both cases support the notion of intrinsic semiconductor behavior, as expected for a Zintl phase. The temperature dependence of the electrical resistivity of a single crystal of Yb10CdSb9 is in line with that, and the evolution of the Seebeck coefficient indicates an electron-dominated transport mechanism, and a respectable power factor of 0.71 μW/cm K2 at 460 K can be calculated for Yb10CdSb9. The electrical resistivity of Yb14CdSb11, however, evolves in a semimetallic manner, which could suggest an overdoped sample or degenerate semiconducting behavior.

Ogunbunmi, Michael O. (ORCID:0000000253409198)↗
DOE OSTI2025

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Performance of Heterostructural TaC/AlGaN Schottky Diodes Based on First Principles Electronic Structure Properties

Advances in ultra-wide bandgap materials, such as high Al-content AlxGa1-xN (AlGaN), are essential for next generation power electronics, but the requirement for lattice matched substrates is currently a significant obstacle. Recently, conductive TaC has emerged as a promising virtual substrate for AlGaN heteroepitaxy, with wurtzite (0001) AlxGa1-xN lattice-matched to rocksalt (111) TaC at x ~ 0.5. Thus, understanding and controlling the electronic properties of the TaC/AlGaN interface is key for developing technological applications based on TaC/AlGaN devices. Using density functional theory and electronic structure calculations, we here investigate TaC/Al0.5Ga0.5N interfaces, where we include explicit alloy models in the slab calculations. We predict the Schottky barrier height and the electric field discontinuity resulting from interface charges. Considering all possible combinations of (Ta, C) substrate termination, (Al/Ga, N) nucleation, and (Al/Ga, N) polarity, we construct a chemical potential phase diagram to identify the stable interfaces that can be accessed through variation of the synthesis conditions. The predicted interface electronic properties are implemented in device performance simulations to demonstrate a practical design for a strain-free, high-efficiency TaC/AlGaN Schottky diode with a low barrier height and without interface charges, underscoring the potential of TaC as a substrate for ultra-wide bandgap devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1998

A Comparison of ZnO and ZnO(-)

Ab initio electronic structure calculations are performed to support and to help interpret the experimental work reported in the proceeding manuscript. The CCSD(T) approach, in conjunction with a large basis set, is used to compute spectroscopic constants for the X(exp 1)Epsilon(+) and (3)II states of ZnO and the X(exp 2)Epsilon(+) state of ZnO(-). The spectroscopic constants, including the electron affinity, are in good agreement with experiment. The ZnO EA is significantly larger than that of O, thus relative to the atomic ground state asymptotes, ZnO(-) has a larger D(sub o) than the (1)Epsilon(+) state, despite the fact that the extra electron goes into an antibonding orbital. The changes in spectroscopic constants can be understood in terms of the X(exp 1)Epsilon(+) formally dissociating to Zn (1)S + O (1)D while the (3)II and (2)Epsilon(+) states dissociate to Zn (1)S + O (3)P and Zn (1) and O(-) (2)P, respectively.

Bauschlicher, Charles W., Jr.↗