Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron Bernstein waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Fokker-Planck/Ray Tracing for Electron Bernstein and Fast Wave Modeling in Support of NSTX

This DOE grant supported fusion energy research, a potential long-term solution to the world's energy needs. Magnetic fusion, exemplified by confinement of very hot ionized gases, i.e., plasmas, in donut-shaped tokamak vessels is a leading approach for this energy source. Thus far, a mixture of hydrogen isotopes has produced 10's of megawatts of fusion power for seconds in a tokamak reactor at Princeton Plasma Physics Laboratory in New Jersey. The research grant under consideration, ER54684, uses computer models to aid in understanding and projecting efficacy of heating and current drive sources in the National Spherical Torus Experiment, a tokamak variant, at PPPL. The NSTX experiment explores the physics of very tight aspect ratio, almost spherical tokamaks, aiming at producing steady-state fusion plasmas. The current drive is an integral part of the steady-state concept, maintaining the magnetic geometry in the steady-state tokamak. CompX further developed and applied models for radiofrequency (rf) heating and current drive for applications to NSTX. These models build on a 30 year development of rf ray tracing (the all-frequencies GENRAY code) and higher dimensional Fokker-Planck rf-collisional modeling (the 3D collisional-quasilinear CQL3D code) at CompX. Two mainline current-drive rf modes are proposed for injection into NSTX: (1) electron Bernstein wave (EBW), and (2) high harmonic fast wave (HHFW) modes. Both these current drive systems provide a means for the rf to access the especially high density plasma--termed high beta plasma--compared to the strength of the required magnetic fields. The CompX studies entailed detailed modeling of the EBW to calculate the efficiency of the current drive system, and to determine its range of flexibility for driving current at spatial locations in the plasma cross-section. The ray tracing showed penetration into NSTX bulk plasma, relatively efficient current drive, but a limited ability to produce current over the whole radial plasma cross-section. The actual EBW experiment will cost several million dollars, and remains in the proposal stage. The HHFW current drive system has been experimentally implemented on NSTX, and successfully drives substantial current. The understanding of the experiment is to be accomplished in terms of general concepts of rf current drive, and also detailed modeling of the experiment which can discern the various competing processes which necessarily occur simultaneously in the experiment. An early discovery of the CompX codes, GENRAY and CQL3D, was that there could be significant interference between the neutral beam injection fast ions in the machine (injected for plasma heating) and the HHFW energy. Under many NSTX experimental conditions, power which could go to the fast ions would then be unavailable for current drive by the desired HHFW interaction with electrons. This result has been born out by experiments; the modeling helps in understanding difficulties with HHFW current drive, and has enabled adjustment of the experiment to avoid interaction with neutral beam injected fast ions thereby achieving stronger HHFW current drive. The detailed physics modeling of the various competing processes is almost always required in fusion energy plasma physics, to ensure a reasonably accurate and certain interpretation of the experiment, enabling the confident design of future, more advanced experiments and ultimately a commercial fusion reactor. More recent work entails detailed investigation of the interaction of the HHFW radiation for fast ions, accounting for the particularly large radius orbits in NSTX, and correlations between multiple HHFW-ion interactions. The spherical aspect of the NSTX experiment emphasized particular physics such as the large orbits which are present to some degree in all tokamaks, but gives clearer clues on the resulting physics phenomena since competing physics effects are reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics design of a 28 GHz electron heating system for the National Spherical Torus experiment upgrade

A megawatt-level, 28 GHz electron heating system is being designed to support non-inductive (NI) plasma current (I{sub p}) start-up and local heating and current drive (CD) in H-mode discharges in the National Spherical Torus Experiment Upgrade (NSTX-U). The development of fully NI I{sub p} start-up and ramp-up is an important goal of the NSTXU research program. 28 GHz electron cyclotron (EC) heating is predicted to rapidly increase the central electron temperature (T{sub e}(0)) of low density NI plasmas generated by Coaxial Helicity Injection (CHI). The increased T{sub e}(0) will significantly reduce the I{sub p} decay rate of CHI plasmas, allowing the coupling of fast wave heating and neutral beam injection. Also 28 GHz electron Bernstein wave (EBW) heating and CD can be used during the I{sub p} flat top in NSTX-U discharges when the plasma is overdense. Ray tracing and Fokker-Planck numerical simulation codes have been used to model EC and EBW heating and CD in NSTX-U. This paper presents a pre-conceptual design for the 28 GHz heating system and some of the results from the numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding cold electron impact on parallel-propagating whistler chorus waves via moment-based quasilinear theory

Earth's magnetosphere hosts a wide range of collisionless particle populations that interact through various wave-particle processes. Among these, cold electrons, with energies below 100 eV, often dominate the plasma density but remain poorly characterized due to measurement challenges such as spacecraft charging and photoelectron contamination. Understanding the contribution of these cold populations to wave–particle interaction is of significant interest. Recent kinetic simulations identified a secondary drift-driven instability, in which parallel-propagating whistler-mode chorus waves excite oblique electrostatic whistler waves near the resonance cone and Bernstein-mode turbulence. These secondary modes enable a new channel of energy transfer from the parallel-propagating whistler wave to the cold electrons. In this work, we develop a moment-based quasilinear theory of the secondary instabilities to quantify such energy exchange. Our results show that these secondary instabilities persist for a wide range of parameters and, in many cases, lead to nearly complete damping of the primary wave. Such secondary instability might limit the amplitude of parallel-propagating whistler waves in Earth's magnetosphere and might explain why high-amplitude oblique whistler or electron Bernstein waves are rarely observed simultaneously with high-amplitude field-aligned whistler waves in the inner magnetosphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-wave feasibility study of anti-radar diagnostic of magnetic field based on O-X mode conversion and oblique reflectometry imaging

An innovative millimeter wave diagnostic is proposed to measure the local magnetic field and edge current as a function of the minor radius in the tokamak pedestal region. The idea is to identify the direction of minimum reflectivity at the O-mode cutoff layer. Correspondingly, the transmissivity due to O-X mode conversion is maximum. That direction, and the angular map of reflectivity around it, contains information on the magnetic field vector B at the cutoff layer. Probing the plasma with different wave frequencies provides the radial profile of B. Full-wave finite-element simulations are presented here in 2D slab geometry. Modeling confirms the existence of a minimum in reflectivity that depends on the magnetic field at the cutoff, as expected from mode conversion physics, giving confidence in the feasibility of the diagnostic. The proposed reflectometric approach is expected to yield superior signal-to-noise ratio and to access wider ranges of density and magnetic field, compared with related radiometric techniques that require the plasma to emit electron Bernstein waves. Due to computational limitations, frequencies of 10-20 GHz were considered in this initial study. Frequencies above the edge electron-cyclotron frequency (f > 28 GHz here) would be preferable for the experiment, because the upper hybrid resonance and right cutoff would lie in the plasma, and would help separate the O-mode of interest from spurious X-waves.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

One-dimensional particle-in-cell simulations of electrostatic Bernstein waves in plasmas with kappa velocity distributions

Electrostatic Bernstein waves that propagate exactly perpendicularly to a static magnetic field in an electron-ion plasma are investigated using one-and-two-halves dimensional particle-in-cell simulations. An ion-to-electron mass ratio of m{sub i}/m{sub e} = 100 is used, allowing sufficient separation of the electron and ion time scales while still accounting for the ion dynamics without resorting to exceptionally long simulation run times. As a consequence of the mass ratio used, both the high frequency electron Bernstein wave and the lower frequency ion Bernstein wave are resolved within a single simulation run. The simulations presented here use isotropic three-dimensional kappa velocity distributions as well as the widely used Maxwellian velocity distribution, and the results from using each of these velocity distributions are analysed and compared. The behaviour of the Bernstein waves is found to be significantly dependent on the spectral index, κ, of the kappa distribution in all frequency domains of the Bernstein waves. In both the Maxwellian and kappa cases, spectral analysis of the electric field (wave) intensities, as a function of ω and k, show very good agreement between the simulation results and the linear dispersion relation for Bernstein waves. This agreement serves to validate the simulation techniques used, as well as the theory of Bernstein waves in plasmas with a kappa velocity distribution. The intensity of the field fluctuations in the simulations containing an abundance of superthermal particles, i.e., where the plasma has a kappa velocity distribution with a low kappa index, is slightly higher compared to the simulations of plasmas with higher kappa values. The plasmas with low kappa values also exhibit a broader region in frequency space of high intensity field fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics Design of a 28 GHz Electron Heating System for the National Spherical Torus Experiment Upgrade

A megawatt-level, 28 GHz electron heating system is being designed to support non-inductive (NI) plasma current (I{sub p}) start-up and local heating and current drive (CD) in H-mode discharges in the National Spherical Torus Experiment Upgrade (NSTX-U). The development of fully NI I{sub p} start-up and ramp-up is an important goal of the NSTX-U research program. 28 GHz electron cyclotron (EC) heating is predicted to rapidly increase the central electron temperature (T{sub e}(0)) of low density NI plasmas generated by Coaxial Helicity Injection (CHI). The increased T{sub e}(0) will significantly reduce the Ip decay rate of CHI plasmas, allowing the coupling of fast wave heating and neutral beam injection. Also 28 GHz electron Bernstein wave (EBW) heating and CD can be used during the I{sub p} flat top in NSTX-U discharges when the plasma is overdense. Ray tracing and Fokker-Planck numerical simulation codes have been used to model EC and EBW heating and CD in NSTX-U. This paper presents a pre-conceptual design for the 28 GHz heating system and some of the results from the numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feasibility study of microwave electron heating on the C-2 field-reversed configuration device

Different microwave heating scenarios for the C-2 plasmas have been investigated recently with use of both the Genray ray-racing code and the IPF-FDMC full-wave code, and the study was focused on the excitation of the electron Bernstein wave (EBW) with O-mode launch. For a given antenna position on C-2 and the fixed 2D plasma density and equilibrium field profiles, simulations have been done for six selected frequencies (2.45 GHz, 5 GHz, 8 GHz, 18 GHz, 28 GHz, and 50 GHz). Launch angles have been optimized for each case in order to achieve high coupling efficiencies to the EBW by the O-X-B mode conversion process and high power deposition. Results show that among those six frequencies, the case of 8 GHz is the most promising scenario, which has both high mode conversion efficiency (90%) and the relatively deeper power deposition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Full-wave calculations of the O-X-B mode conversion scenario in the RFX-mod reversed field pinch device

The possibility of coupling electron Bernstein waves (EBW) to the overdense plasma in RFX-mod has been explored. A frequency of 28 GHz has been chosen due to the plasma parameters and the commercial availability of this frequency. A two dimensional full-wave code has been used to model the O-X-B mode conversion process in which an incident O-mode is first converted to an X-mode and then to an EBW. Parameter studies have been carried out to optimise the mode-conversion efficiency. The maximum conversion efficiency for optimal launching conditions amounts to 56% for a single pass. The vacuum vessel has been included in the full-wave calculations to address the effects of multiple reflections between the vessel wall and the plasma boundary. A significant increase in conversion efficiency is observed as a result.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of EBW Thermal Emission and Mode Conversion Physics in H-Mode Plasmas on NSTX

High β plasmas in the National Spherical Torus Experiment (NSTX) operate in the overdense regime, allowing the electron Bernstein wave (EBW) to propagate and be strongly absorbed/emitted at the electron cyclotron resonances. As such, EBWs may provide local electron heating and current drive. For these applications, efficient coupling between the EBWs and electromagnetic waves outside the plasma is needed. Thermal EBW emission (EBE) measurements, via oblique B-X-O double mode conversion, have been used to determine the EBW transmission efficiency for a wide range of plasma conditions on NSTX. Initial EBE measurements in H-mode plasmas exhibited strong emission before the L-H transition, but the emission rapidly decayed after the transition. EBE simulations show that collisional damping of the EBW prior to the mode conversion (MC) layer can significantly reduce the measured EBE for Te < 20 eV, explaining the observations. Lithium evaporation was used to reduce EBE collisional damping near the MC layer. As a result, the measured B-X-O transmission efficiency increased from < 10% (no Li) to 60% (with Li), consistent with EBE simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation And Damping Of High Harmonic Fast Waves And Electron Cyclotron Waves In The Nstx-U-Device

For the spherical torus and for conventional tokamaks to be viable means of producing fusion energy there are two important requirements. The first is to heat the plasma in the experimental devices to high temperatures; preferably, to fusion relevant temperatures. The second is to drive a current in the plasma so that the fusion device operates in a steady-state mode. A pulsed fusion reactor for energy production is not desirable. A favored means to achieve both of these requirements is through the use of microwaves, commonly referred to as radio frequency waves. This proposal was to understand observations from the National Spherical Torus Experiment Upgrade (NSTX-U) device on radio frequency wave heating of the confined plasma during operations with high harmonic fast waves. The proposed research was also directed toward assisting in the optimization of the experimental modes of operation so as to maximize the heating efficiency. A detailed analysis of the experiments has shown that about one-third of the input radio frequency power does not make it into the core region of the plasma where heating is required. The losses are believed to occur primarily in the edge region where the radio frequency power is initially coupled into the plasma. Using sophisticated computational codes and theoretical models, that have been developed for the NSTX-U experimental program, this research quantified the physical processes which occur in the edge plasma and lead to a decrease in the heating efficiency. The effect of edge turbulence on the scattering of radio frequency waves was studied for waves in the ion cyclotron and electron cyclotron range of frequencies. For high harmonic fast waves in the ion cyclotron range of frequencies, simulations were carried out using a full-wave solver that was extended to the vacuum vessel wall. These simulations successfully reproduced trends that were observed experimentally. This simulation capability was also used to study the interaction of high harmonic fast waves with the scrape-off layer plasma. More recently, a new technique has been developed for the calculation of radio frequency waves in toroidal geometry that enables the simultaneous incorporation of antenna geometry, plasma facing components, the scrape off-layer, and core propagation in the high harmonic fast wave regime. The effect of turbulent plasmas on the mode conversion of extraordinary electromagnetic waves in the electron cyclotron range of frequencies in the NSTX-U plasma has been studied theoretically. In the over-dense plasmas of NSTX-U, the traditional electromagnetic waves are not effective for delivering energy and momentum to the core plasma. However, electron Bernstein waves generated by mode conversion are efficient carriers of wave energy and momentum to the core. The mode conversion occurs in the turbulent edge region. A theory for mode conversion in such plasmas has been developed. The parameters that can optimize the mode conversion can be readily determined. Also, the model is useful for experimentalists to analyze observation on a shot-to-shot basis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation And Damping Of High Harmonic Fast Waves And Electron Cyclotron Waves In The Nstx-U-Device

For the spherical torus and for conventional tokamaks to be viable means of producing fusion energy there are two important requirements. The first is to heat the plasma in the experimental devices to high temperatures; preferably, to fusion relevant temperatures. The second is to drive a current in the plasma so that the fusion device operates in a steady-state mode. A pulsed fusion reactor for energy production is not desirable. A favored means to achieve both of these requirements is through the use of microwaves, commonly referred to as radio frequency waves. This proposal was to understand observations from the National Spherical Torus Experiment Upgrade (NSTX-U) device on radio frequency wave heating of the confined plasma during operations with high harmonic fast waves. The proposed research was also directed toward assisting in the optimization of the experimental modes of operation so as to maximize the heating efficiency. A detailed analysis of the experiments has shown that about one-third of the input radio frequency power does not make it into the core region of the plasma where heating is required. The losses are believed to occur primarily in the edge region where the radio frequency power is initially coupled into the plasma. Using sophisticated computational codes and theoretical models, that have been developed for the NSTX-U experimental program, this research quantified the physical processes which occur in the edge plasma and lead to a decrease in the heating efficiency. The effect of edge turbulence on the scattering of radio frequency waves was studied for waves in the ion cyclotron and electron cyclotron range of frequencies. For high harmonic fast waves in the ion cyclotron range of frequencies, simulations were carried out using a full-wave solver that was extended to the vacuum vessel wall. These simulations successfully reproduced trends that were observed experimentally. This simulation capability was also used to study the interaction of high harmonic fast waves with the scrape-off layer plasma. More recently, a new technique has been developed for the calculation of radio frequency waves in toroidal geometry that enables the simultaneous incorporation of antenna geometry, plasma facing components, the scrape off-layer, and core propagation in the high harmonic fast wave regime. The effect of turbulent plasmas on the mode conversion of extraordinary electromagnetic waves in the electron cyclotron range of frequencies in the NSTX-U plasma has been studied theoretically. In the over-dense plasmas of NSTX-U, the traditional electromagnetic waves are not effective for delivering energy and momentum to the core plasma. However, electron Bernstein waves generated by mode conversion are efficient carriers of wave energy and momentum to the core. The mode conversion occurs in the turbulent edge region. A theory for mode conversion in such plasmas has been developed. The parameters that can optimize the mode conversion can be readily determined. Also, the model is useful for experimentalists to analyze observation on a shot-to-shot basis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Active Measurement of Plasma Parameters in Over-Dense MFE Reactor Plasma Using High Frequency Beat-Wave Resonantly Generated Thermal Bernstein Waves

UC Davis was funded to explore the combination of beat-wave excitation and laser scattering to make completely non-invasive determination of local plasma conditions. This involves the use of two high frequency mm-wave sources of differing frequencies (the pump waves) to excite plasma waves at the difference of the frequencies, which is known as the beat frequency. The difference frequency or the frequency of the beat wave is chosen so that we produce plasma waves whose fluctuating electron density is a sensitive function of plasma parameters at the location where the source waves overlap. This fluctuation can be detected from outside the plasma, by measuring the deflection of a probe beam directed at the overlap region between the two pump waves (i.e., collective scattering). This work is an extension of mm-wave frequencies of a 10 GHz beat-wave experiment conducted on the DDT toroidal device (see Fig. 1) in a magnetized plasma where the excited Langmuir wave is replaced by the magnetized upper hybrid wave. Here, two high power (> 1 kW) ~94 GHz pump sources will be employed to match the upper hybrid resonance. The primary envisioned experiment is to drive the electron Bernstein wave (EBW) in the interior of a magnetized plasma. The EBW is a hot-plasma electrostatic wave, which cannot propagate in vacuum. Roots of the EBW dispersion relation occur at frequencies slightly higher than harmonics of the electron cyclotron frequency. Use of the EBW has particular advantages for measuring plasma magnetic field in plasmas with relatively high density and low magnetic field, as is the case in spherical tokamaks. This is the “over dense” condition of future efficient high beta magnetic confinement fusion reactors such as the spherical tokamak (STs). The overarching goal of the proposed project is to demonstrate beat wave EBW excitation in low density and temperature parameters that are directly scalable to over-dense spherical tokamaks such as NSTX or MAST, where measurement of magnetic field by electron cyclotron emission (ECE) is experimentally complex, and requires models of plasma profiles in order to interpret results. In such experiments, availability of point measurements of magnetic field strength provided by a beat-wave diagnostic would serve as a powerful independent check on the ECE results, serving to validate the assumed profiles and wave-propagation models used. The first step was to assemble/modify the target chamber in which the beat-wave plasma experiments will take place. Here, the target chamber of the CTIX compact-toroid (spheromak) injector was chosen. At the time that the proposal was submitted, the aim was to conduct the experiments in the CTIX experimental facilities located at the Livermore campus of UC Davis using microwave/mm-wave equipment brought from the main campus., However, by the time DoE funds for this project were awarded, the CTIX experimental facilities located at the Livermore campus of UC Davis were in the process of being shut down due to the closure of the Livermore campus by Lawrence Livermore National Laboratory (LLNL). Consequently, the equipment needed for this project was crated up and shipped from Livermore to Davis as part of the laboratory shutdown after space on campus was secured and College of Engineering approval secured. Once it arrived in Davis on December 20, 2018, work on the project began in earnest with the initial efforts directed toward developing a new plasma target source. Because of the shutdown of the CTIX facility, the scope of the project thus had to be reduced due to the abbreviated amount of time allocated to the project once the shutdown/move had been completed. Chamber modifications have been completed, including the fabrication and installation of a 38 GHz interferometer, as described in Sec. 3. The thermionic plasma source has been tested and characterized. The magnetic field required for the EBW experiments will be generated by permanent magnets mounted on plates positioned above and below the chamber. Magnetic simulations have been performed, and show that a 3-ring magnet arrangement on each plate, with a plate separation of 50 cm, is required to achieve the ~100 G uniform magnetic field in the interaction region that we feel is necessary to ensure good EBW coupling. We proved unable to successfully revive either of Prof. Luhmann’s two high power (≥20 kW) 94 GHz millimeter-wave sources after their extended time in storage and decided to postpone further efforts and concentrate on slightly lower power sources. Consequently, we were successful in reviving a ~2 kW extended klystron amplifier (EIK), which together with a ~2 kW extended interaction oscillator (EIO) will provide the two pump sources required for the project. Safe operation of the EIO requires extensive modifications to one of Prof. Luhmann’s pulse modulators - these modulator modifications are ongoing, which has unfortunately delayed the planned beat-wave experiments. Details of this work are provided in Sec. 3. Even though project funding has now ended, we still plan to proceed to complete the EIO pulse modulator modifications, install the two ~94 GHz pump wave sources on the target chamber, and conduct unmagnetized tests of the beat-wave concept which involve coupling to unmagnetized electron plasma waves rather than magnetized EBWs. Should these experiments prove successful, we plan to submit a follow-up proposal for additional funding which would allow us to undertake the magnetized EBW experiments.

42 ENGINEERING↗

Wave excitation in inhomogeneous dielectric media

The equation describing the propagation of a mode driven by external currents in an inhomogeneous dielectric is derived from the principle of the conservation of wave energy density and wave momentum density. The wave amplitude in steady state is obtained in terms of a simple spatial integration of the driving current. The contribution from the spatial derivative of the dielectric response is found to be important. The analytical predictions are verified through comparison with {delta}f particle-in-cell computations of electron Bernstein wave propagation, thus showing applicability to kinetic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic simulations of X-B and O-X-B mode conversion

We have performed fully-kinetic simulations of X-B and O-X-B mode conversion in one and two dimensional setups using the PIC code EPOCH. We have recovered the linear dispersion relation for electron Bernstein waves by employing relatively low amplitude incoming waves. The setups presented here can be used to study non-linear regimes of X-B and O-X-B mode conversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Full-wave modeling of the O-X mode conversion in the Pegasus toroidal experiment

The ordinary-extraordinary (O-X) mode conversion is modeled with the aid of a 2D full-wave code in the Pegasus toroidal experiment as a function of the launch angles. It is shown how the shape of the plasma density profile in front of the antenna can significantly influence the mode conversion efficiency and, thus, the generation of electron Bernstein waves (EBWs). It is therefore desirable to control the density profile in front of the antenna for successful operation of an EBW heating and current drive system. On the other hand, the conversion efficiency is shown to be resilient to vertical displacements of the plasma as large as {+-}10 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parametric decay of plasma waves near the upper-hybrid resonance

An intense X wave propagating perpendicularly to dc magnetic field is unstable with respect to a parametric decay into an electron Bernstein wave and a lower-hybrid wave. A modified theory of this effect is proposed that extends to the high-intensity regime, where the instability rate γ ceases to be a linear function of the incident-wave amplitude. An explicit formula for γ is derived and expressed in terms of cold-plasma parameters. Here, theory predictions are in reasonable agreement with the results of the particle-in-cell simulations presented in a separate publication.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

System studies of rf current drive for MST

Two rf schemes are being studied on the MST reversed field pinch for their potential in current profile control experiments. MHD modeling has shown that a substantial externally-driven off axis parallel current can improve stability of the dominant core tearing modes. A radially localized axisymmetric population of fast electrons has been observed by SXR emission during LH injection (100kW at 800MHz), and is consistent with CQL3D modeling which predicts a small driven current. Computational work suggests that doubling the input power will statistically improve the LH-induced SXR signal to background ratio, and that about 2MW of injected power (an order of magnitude increase) will drive enough current for stabilization of tearing modes. Additionally, a 1 MW 5.5 GHz electron Bernstein wave (EBW) experiment is under construction, which utilizes a very simple and compact antenna compatible with the demands of the RFP. EBW allows access to electron cyclotron heating and current drive in the overdense plasma. Coupling of the external electromagnetic wave to the EBW has been demonstrated, and initial tests at {approx}100kW power have produced a small, localized xray flux consistent with rf heating and high diffusivity of fast electrons. Computational work is currently underway to answer the very important questions of how much power is required, and what level of electron diffusivity is tolerable, to generate a consequential amount of EBW current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First results from EBW emission diagnostics on COMPASS

COMPASS tokamak shots at low magnetic field feature overdense plasmas during the extended current flat-top phase. The first harmonic of the electron cyclotron emission is completely cutoff for O and X modes and so the emission caused by electron Bernstein waves (EBWs) propagating obliquely with respect to the magnetic field and undergoing so called EBW-X-O conversion process can be observed. We perform an angular scan of the EBW emission during a set of comparable shots in order to determine the optimum antenna direction. A weak dependence of the radiative temperature on the antenna angles indicates an influence of multiple reflections from the vessel wall. The low temperature at the mode conversion region is responsible for the collisional damping of EBW, which can explain several times lower measured radiative temperature than the electron temperature measured by the Thomson scattering system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗