Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drying methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Pyrophosphates AMoP2O7 (A = Li and Na): Synthesis, structure and electrochemical properties

Highlights: • Carbon-coated pyrophosphate materials AMoP2O7 (A = Li and Na) were prepared via freeze- drying method. • BVEL analysis revealed the remarkable difference in the alkali diffusion behaviors of two AMoP{sub 2}O{sub 7} polymorphs. • LiMoP{sub 2}O{sub 7} shows the superior electrochemical activity towards de/intercalation of Li{sup +} and Na{sup +} ions compared with NaMoP{sub 2}O{sub 7} - Abstract: The carbon-coated single-phase samples of the pyrophosphates AMoP{sub 2}O{sub 7} (A = Li and Na) were synthesized using freeze-drying followed by annealing in a sealed silica tube with the Fe/FeO getter. The Rietveld refinement of the X-Ray powder diffraction data proved both structures are built up as a network of corner-linked MoO{sub 6} octahedra and P{sub 2}O{sub 7} groups with A-cations located in the open tunnels running along the [100] (LiMoP{sub 2}O{sub 7}) and [101] (NaMoP{sub 2}O{sub 7}) directions. The bond valence energy landscapes (BVEL) analysis revealed three-dimensional pathways of alkali-ion migration with significantly different activation energies (0.8 eV for LiMoP{sub 2}O{sub 7} and 4.5 eV for NaMoP{sub 2}O{sub 7}) anticipating LiMoP{sub 2}O{sub 7} to exhibit faster Li{sup +} diffusion and better electrochemical characteristics. Both materials displayed electrochemical activity in Li- and Na-cells with reversible capacities of ∼20 mA h g{sup −1} for NaMoP{sub 2}O{sub 7} and more than 70 mA h g{sup −1} for LiMoP{sub 2}O{sub 7}, being in a good agreement with the BVEL results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

(Oxy)hydroxides Formed on Aluminum Fuel Materials After Irradiation and Long-Term Wet Storage - 20354

The aluminum cladding of research-reactor fuel experiences general corrosion when in contact with water during in-reactor service and post-discharge wet storage, resulting in the formation of adherent aluminum (oxy)hydroxide films. These (oxy)hydroxides contain chemically-bound water that poses challenges for extended dry storage due to the risk of thermal or radiolytic decomposition releasing free water and/or hydrogen and oxygen gases. This study describes characterization of the (oxy)hydroxides present on several aluminum materials used in reactor operation and subsequently stored wet in the L-Basin storage facility at the Savannah River Site (SRS) for an extended period. Characterization data providing insight into the loading, composition, and morphology of (oxy)hydroxides to be expected on service-exposed aluminum cladding provides valuable benchmarks for designing adequate drying and dry-storage approaches. This work is part of a broader investigation to address knowledge gaps and technical data needs for dry storage of aluminum-clad spent nuclear fuel (ASNF), which included in-lab growth of (oxy)hydroxide films on aluminum alloy substrates to investigate formation behavior, investigation of drying methods to remove existing (oxy)hydroxides from ASNF cladding, and measurement of radiolytic yield of hydrogen from (oxy)hydroxide powders and films. In this study, (oxy)hydroxide films were characterized for three aluminum-alloy materials used in reactors and subsequently stored wet for up to approximately 40 years in L-Basin at SRS: one cropping from a Missouri University Research Reactor (MURR) fuel element (Al-6061 alloy), one cropping from a Universal Sleeve Housing (USH) (Al-6063 alloy), and one Mark-16B fuel assembly (either Al-6061 or Al- 6063). The USH and Mark-16B were used in SRS production reactors. Characterization of the as-received (oxy)hydroxides included scanning electron microscopy (SEM) in both plan-view and cross-section to characterize the (oxy)hydroxide layer's morphology, thickness, and structure. X-ray diffraction (XRD) was used to identify the chemical composition and distinguish between the various aluminum (oxy)hydroxides known to form under reactor and storage conditions. XRD analysis revealed both bayerite (Al(OH)3) and boehmite (AlOOH) on the surface of the MURR and USH samples, as well as bayerite, boehmite, and gibbsite (another Al(OH)3 polymorph) on the surface of the Mark-16B sample. The aluminum trihydroxides, bayerite and gibbsite, are typically associated with corrosion in low-temperature (<80 deg. C) water, while boehmite is expected to form at higher water temperature (>80 deg. C). The presence of bayerite on the USH, which is believed to have operated close to 90 deg. C, suggests that boehmite formed during in-reactor exposure was not protective against further hydroxide growth in low-temperature wet storage. Cross-section scanning electron microscopy (SEM) showed total (oxy)hydroxide layer thicknesses of ∼5- 10 μm for the MURR and ∼5-15 μm for the Mark-16B. The thickness of the USH's (oxy)hydroxide layer was indiscernible by the current mounting and imaging method, despite plan-view SEM and XRD confirming the presence of an (oxy)hydroxide layer. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Extraction of Terpenoids from Pine Needle Biomass Using Dimethyl Ether

Pine needles are an industrial feedstock for extracts used in a variety of applications, but conventional extraction methods often result in a degradation of the terpenoid compounds that naturally occur in loblolly pine ( Pinus taeda ). Separation of these compounds from pine biomass is an energy-intensive operation, typically requiring a significant input of thermal energy. An alternative separation approach with potential energy savings is extraction with a condensable gas, namely, dimethyl ether. Biomass materials are exposed to liquid dimethyl ether under pressure, which mobilizes the organics. The extract is then separated from the insoluble pine matter, and dimethyl ether is volatilized away from the separated organic species. A variety of terpene derivatives were extracted from pine needle biomass using this approach, including monoterpenes, sesquiterpenes, and related oxygenates, which were identified using two-dimensional gas chromatography/mass spectrometry. Additionally, the dimethyl ether-treated needles resemble needles subjected to low-temperature drying, whereas needles treated with a high-temperature drying method appear to have shrunken structures. The results suggest that dimethyl ether extraction has significant potential for separating valuable organics from complex matrices without the application of thermal energy during treatment.

dimethyl ether (DME) extraction↗
DOE OSTI2017

Influence of Osmotic Drying with an Aqueous Poly(ethylene Glycol) Liquid Desiccant on Alumina Objects Gelcast with Gelatin

Gelcasting and liquid desiccant drying are novel forming and drying methods used to mitigate common issues associated with the fabrication of complex advanced ceramic objects. Here, the molecular weight and osmotic pressure of aqueous poly(ethylene glycol) (PEG) desiccant solutions were simultaneously varied to understand their influence on the net mass loss rates of gelcast alumina samples prepared using gelatin as a gelling agent. Additionally, the amount of PEG diffusion and water diffusion to and from the ceramic samples after 150 min of immersion in the liquid desiccant was correlated to the solution properties as was the final bulk density of the sintered samples. Furthermore, solutions with high molecular weight and low osmotic pressure resulted in low PEG gain and low water loss, while solutions with low molecular weight and high osmotic pressure resulted in high PEG gain and high water loss. In some cases, more than 40 wt% of the total water per sample was removed through the liquid desiccant drying process.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar Power Systems (Final Report)

We demonstrated that adding nanoparticles to a molten salt would increase its utility as a thermal energy storage medium for a concentrating solar power system. Specifically, we demonstrated that we could increase the specific heat of nitrate and carbonate salts containing 1% or less of alumina nanoparticles. We fabricated the composite materials using both evaporative and air drying methods. We tested several thermophysical properties of the composite materials, including the specific heat, thermal conductivity, latent heat, and melting point. We also assessed the stability of the composite material with repeated thermal cycling and the effects of adding the nanoparticles on the corrosion of stainless steel by the composite salt. Our results indicate that stable, repeatable 25-50% improvements in specific heat are possible for these materials. We found that using these composite salts as the thermal energy storage material for a concentrating solar thermal power system can reduce the levelized cost of electricity by 10-20%. We conclude that these materials are worth further development and inclusion in future concentrating solar power systems.

14 SOLAR ENERGY↗
DOE OSTI2018

Kinetic, Isotherm and Thermodynamic Studies for Removal of Methylene Blue Using β-Cyclodextrin/Activated Carbon Aerogels

A novel aerogel (β-CD/AC) was prepared through polymerization reaction of β-cyclodextrin (β-CD) with activated carbon (AC) and vacuum freeze drying method. The structure and morphology of β-CD/AC were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) method and thermogravimetric analysis (TGA). β-CD/AC is used to deal with wastewater containing methylene blue (MB) dye. The effects of AC content in β-CD/AC, pH value, temperature, contact time and amount of adsorbent on the adsorption of MB were studied in detail. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms. The Langmuir monolayer adsorption capacity of MB onto β-CD/AC was estimated as 166.67 mg/g. The kinetics of MB onto β-CD/AC was well described by the pseudo-second order model. The thermodynamic parameters indicated that the adsorption reaction of MB onto β-CD/AC was endothermic and spontaneous.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Fabrication and Cytocompatibility Evaluation of Psyllium Husk (Isabgol)/Gelatin Composite Scaffolds

Psyllium husk or isabgol contains xylan backbone linked with arabinose, rhamnose, and galacturonic acid units (arabinoxylans). In this study, we demonstrate the fabrication and characterization of a macroporous three-dimensional (3D) composite scaffold by mixing psyllium husk powder (PH) and gelatin (G) in different ratios, viz.100 PH, 75/25 PH/G, and 50/50 PH/G (w/w), using an EDC-NHS coupling reaction followed by freeze-drying method. The reaction was performed in aqueous as well as in alcoholic media to determine the most appropriate solvent system for this purpose. The mechanical strength of the scaffold system was improved from 151 to 438 kPa. The fabricated scaffolds exhibited enhanced structural stability, remarkable swelling capacity, and escalated cell growth and proliferation. ATR-FTIR analysis showed the presence of amide and ester bonds indicating covalent crosslinking. SEM micrographs revealed the porous nature of the scaffolds with pores ranging from 30 to 150 μm, and further pore size distribution curve indicated that 75/25 PH/G (w/w%) EDC-NHS-alcohol scaffold exhibited the best fit to the Gaussian distribution. Swelling capacity of the 100 PH EDC-NHS-alcohol scaffolds was found to be nearly 40% from its original weight in 48 h. MTT assay using fibroblast cells revealed ~ 80% cellular proliferation by 6th day within the fabricated scaffolds in comparison to control. .

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

50-kWth methane/air chemical looping combustion tests with commercially prepared CuO-Fe 2 O 3 -alumina oxygen carrier with two different techniques

CuO-Fe 2 O 3 /alumina oxygen carriers were manufactured using two different techniques (i.e., spray drying and wet granulation). The spray drying method produced porous, spherical particles in the range of 100–200 µm. The wet granulation, or tumbling method, produced particles in the range of 200–600 µm. Both batches of material showed good gas conversion and particle durability during tests in NETL’s 50-kWth chemical looping circulating fluidized bed combustor unit at 700–900 °C. No agglomeration was observed, even though the oxygen carrier had a high CuO concentration (30%). The particle losses with 200–600 µm batch were significantly lower than that with the 100–200 µm batch. The oxygen carrier materials in the 200–600 µm range were circulated for approximately 3.1 days in the target temperature range (700–850 °C) and a total of approximately 40 h of chemical looping combustion testing was conducted during that time. The average fuel reactor temperatures ranged from 760 to 815 °C for the chemical looping combustion test periods, and the average air reactor temperature ranged from 840 to 915 °C. The fuel conversion from natural gas to CO 2 ranged from 50 to 80%. Approximately 1.6 h of continuous operation was achieved with no gas preheat and no natural gas augmented heating. During this test period, the average fuel reactor temperature ranged from 780 to 825 °C, the air reactor temperature ranged from 930 to 960 °C, and the natural gas to CO 2 conversion ranged from 50 to 65%. Finally, analysis of the oxygen carrier after the test indicated that there were no significant changes in the particle size or the surface morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental study on nanoparticle injection by using a lab-scale wellbore system

After long-term underground storage of CO 2 gas, leakage generated from the cement annulus in the wellbore system is often detected due to unbalanced pressure, chemical attack, etc. Here in this paper, nanoparticle injection technology is introduced to inject different types of nanoparticles into the cementitious material for repairing the leakage paths through electrochemical means. The pressure vessel is designed and built to provide a realistic underground environment with high pressure and high temperature. The testing results are evaluated by the saturate-drying method, charge-passed method, and X-ray microscopy (XRM) test. The results consistently show that all types of nanoparticles tested in this paper can be successfully driven into the cement annulus within the wellbore system. The pressure (6.89 MPa) and temperature (80 °C) in the pressure vessel, and the surrounding rock can directly affect the injection effectiveness. The nanoparticle injection technology is proven to be beneficial to the cracked cement annulus for preventing the leakage of CO 2 gas through the lab-scale wellbore system.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Synthesis, structure and electrochemical properties of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F fluoride-phosphate

LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F fluoride-phosphate was synthesized via conventional solid-state and novel freeze-drying routes. The crystal structure was refined based on neutron powder diffraction (NPD) data and validated by electron diffraction (ED) and high-resolution transmission electron microscopy (HRTEM). The alkali ions are ordered in LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F and the transition metals jointly occupy the same crystallographic sites. The oxidation state and oxygen coordination environment of the Fe atoms were verified by {sup 57}Fe Mössbauer spectroscopy. Electrochemical tests of the LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F cathode material demonstrated a reversible activity of the Fe{sup 3+}/Fe{sup 2+} redox couple at the electrode potential near 3.4 V and minor activity of the Co{sup 3+}/Co{sup 2+} redox couple over 5 V vs Li/Li{sup +}. The material exhibited the discharge capacity of more than 82% (theo.) regarding Fe{sup 3+}/Fe{sup 2+} in the 2.4÷4.6 V vs Li/Li{sup +} potential range. - Graphical abstract: The ball-polyhedral representation of the LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F crystal structure. The MO{sub 4}F{sub 2} units are depicted as blue octahedra, PO{sub 4} units as orange tetrahedra, sodium atoms are designated as yellow (Na1), lithium – red and brown (Li2, Li3 resp.), fluorine – green, oxygen – violet spheres. - Highlights: • Freeze-drying method was successfully applied to the synthesis of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F. • The crystal structure of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F was refined based on NPD and validated by ED and HRTEM. • LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F demonstrated a reversible Li de/intercalation in the 2.5÷4.6 V vs Li/Li{sup +} range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Facile Synthesis of Boron-Doped rGO as Cathode Material for High Energy Li–O 2 Batteries

To improve the electrochemical performance of the high energy Li–O2 batteries, it is important to design and construct a suitable and effective oxygen-breathing cathode. Herein, a three-dimensional (3D) porous boron-doped reduction graphite oxide (B-rGO) material with a hierarchical structure has been prepared by a facile freeze-drying method. In this design, boric acid as the boron source helps to form the 3D porous structure, owing to its cross-linking and pore-forming function. This architecture facilitates the rapid oxygen diffusion and electrolyte penetration in the electrode. Meanwhile, the boron–oxygen functional groups linking to the carbon surface or edge serve as additional reaction sites to activate the ORR process. It is vital that boron atoms have been doped into the carbon lattices to greatly activate the electrons in the carbon π system, which is beneficial for fast charge under large current densities. Density functional theory calculation demonstrates that B-rGO exhibits much stronger interactions with Li5O6 clusters, so that B-rGO more effectively activates Li–O bonds to decompose Li2O2 during charge than rGO does. With B-rGO as a catalytic substrate, the Li–O2 battery achieves a high discharge capacity and excellent rate capability. Moreover, catalysts could be added into the B-rGO substrate to further lower the overpotential and enhance the cycling performance in future.

Wu, Feng↗
DOE OSTI2021

Recent Advances in Synthesis and Application of Lignin Nanoparticles

The ability to engineer material at its nanoscale has shown great potentials in overcoming significant obstacles in numerous fields. Because of its abundance, biodegradability, renewability, and eco-friendliness nature, lignin has become an ideal precursor for producing nanoscale materials from both research and industrial communities. Nanolignin, also known as colloidal lignin particle (CLP) or lignin nanoparticle (LNP), has received significant interest in recent years and its production and application in numerous fields represent an important aspect of lignin valorization. LNPs could be produced via several techniques including sonication, solvent exchange, and precipitation, which could be divided into wet and dry methods. Applications of LNPs in UV protection, cosmetics, food package, coatings, and drug delivery have been reported in the literature. Despite being extensively studied, LNPs as well as their derived materials with controlled shape and architecture are still largely underexploited. This book chapter mainly covers recent advances in the preparation of LNPs and their use in the novel and advanced applications in different areas.

Meng, Xianzhi↗
DOE OSTI2013

Development of high strength hydroxyapatite for bone tissue regeneration using nanobioactive glass composites

With an increasing demand of biocompatible bone substitutes for the treatment of bone diseases and bone tissue regeneration, bioactive glass composites are being tested to improvise the osteoconductive as well as osteoinductive properties. Nanobioactive glass (nBG) composites, having composition of SiO{sub 2} 70 mol%, CaO 26 mol % and P{sub 2}O{sub 5} 4 mol% were prepared by Freeze drying method using PEG-PPG-PEG co-polymer. Polymer addition improves the mechanical strength and porosity of the scaffold of nBG. Nano Bioactive glass composites upon implantation undergo specific reactions leading to the formation of crystalline hydroxyapatite (HA). This is tested in vitro using Simulated Body Fluid (SBF). This high strength hydroxyapatite (HA) layer acts as osteoconductive in cellular environment, by acting as mineral base of bones, onto which new bone cells proliferate leading to new bone formation. Strength of the nBG composites as well as HA is in the range of cortical and cancellous bone, thus proving significant for bone tissue regeneration substitutes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

SolVap_StarTer (Solvent Evaporation Graphical User Interface) [SWR-26-029]

SolVap_StarTer is an open-source solvent evaporation GUI. The software combines previously published (peer-reviewed scientific journals) evaporation and crystallization physics into an easy-to-use graphical interface. The software will allow the user to specify a coating composition and drying environment, and then predict the evolution of the film as it dries. Potential applications include tracking the change in multi-solvent composition and solute concentration in solution-processed perovskites films, predicting the point of crystallization, and calculating equivalent processing parameters for transferring a process between different coating and drying methods. Github repo: https://github.com/NatLabRockies/SolVap Streamlit app: https://solvap.streamlit.app/

Starger, Jesse [National Laboratory of the Rockies↗