Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “domination number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Auxiliary heating and current drive physics for the ST-E1 fusion power plant

This work describes the physics basis for the proposed auxiliary heating and current drive system on the ST-E1 fusion power plant. The ST-E1 flattop plasma considered here is fully non-inductive with a bootstrap fraction of 0.9 and the remaining current driven by EC waves. Using the recently published physics-based optimization method for EC launchers (Lopez et al 2025 Plasma Phys. Control. Fusion 67 055012), we show that the target flattop ECCD can be achieved with a net efficiency of 52 kA MW −1 using fundamental O-mode (O1) with frequency range 160–200 GHz launched from the low-field side top half of the vacuum vessel (LFS top-launch). From considering two candidate rampup scenarios, we conclude that LFS top-launch O1 ECCD can be equally effective during the early stages of plasma operation, although poloidal steering might be needed. X-mode waves injected from the LFS midplane are also shown to be effective for rampup even when T e < 1 keV. We also present modeling results for the pre-conceptual design of an ICRH system proposed for ST-E1. Using TORIC, we find that an ICRH system aiming for 42–48 MHz and toroidal mode number n φ ~ 10 robustly achieves dominant ion damping via Helium-3 minority heating transitioning to second-harmonic Tritium heating. We then show that such waves can be efficiently generated by a 5-strap traveling-wave antenna (TWA) using the Petra-M code. The TWA has a 40–45 MHz passband within which ~60% of the power entering the TWA is coupled to the plasma with the remaining ~40% of the power being transmitted through the TWA and possibly recirculated; the power reflected back into the transmission lines is negligible. This passband structure persists even when the evanescent distance is increased by a factor of two, or when the magnetic-field angle is increased by 30°, demonstrating inherent load resilience that will be crucial for effective ICRH on ST-E1.

electron cyclotron↗
DOE OSTI2020

Preferential turbulence enhancement in two-dimensional compressions

When initially isotropic three-dimensional (3D) turbulence is compressed along two dimensions, the compression supplies energy directly to the flow components in the compressed directions, while the flow component in the noncompressed direction experiences the effects of compression only indirectly through the nonlinearity of the hydrodynamic equations. Here we present our study of such 2D compressions using numerical simulations. For initially isotropic turbulence, we find that the nonlinearity can be insufficient to maintain isotropy, with the energy components parallel to the compression coming to dominate the turbulent energy, with a number of consequences. Among these are the possibilities for stronger and more easily sustained growth of turbulent energy than in 3D compressions and for an increasing turbulent Mach number even in a compression without thermal losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Nonuniform Absorption and Scattered Light in Direct-Drive Implosions Driven by Polarization Smoothing

Laser-direct-drive symmetric implosions on OMEGA illuminate a target with 60 laser beams and are designed to produce spherical implosions. Each beam is smoothed using orthogonal polarizations obtained by passing through distributed polarization rotators (DPR’s). Observations of the scattered light from OMEGA implosions do not show the expected symmetry and have much larger variation than standard predictions. For the first time, we have quantified the scattered-light nonuniformity from individual beams and identified the DPR’s as the source of the enhanced nonuniformity. An instrument was invented that isolated and measured the variation in the intensity and polarization of the light scattered from each OMEGA beam. The asymmetric intensity and polarization measurements are explained when the on-target offsets between the two orthogonal polarizations produced by the DPR’s are modeled using a 3-D cross-beam energy transfer (CBET) code that tracks the polarizations of each beam. The time-integrated nonuniformity in laser absorption and scattered light due to CBET and the DPR polarization offsets during high-performance OMEGA implosions is predicted to be significant and dominated by low spherical harmonic mode numbers. Further, the nonuniformity is predicted to be greatly reduced by replacing the DPR’s with new optics that create smaller offsets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Capacity of Arctic fjord sediments to degrade carbohydrates from permafrost active layer

The degradation of organic matter (OM) by microorganisms in thawing permafrost produces greenhouse gases. Terrestrial OM is transported into fjords through hydrological runoff, but it is unclear whether the microbial mechanisms of OM degradation on land persist after soils enter marine environments, which differ greatly in conditions and microbial communities. This question is particularly relevant for low-OM soils, which dominate Arctic landscapes and are more exposed to oxidants. Here, we compared OM-degrading capacity in permafrost-affected active layer soils and adjacent fjord sediments from Kongsfjorden, Svalbard, focusing on carbohydrate-active enzymes (CAZymes), which target some of the most abundant types of organic matter in soils. Using multi-omics approaches—metagenomics, metagenome-assembled genomes (MAGs), metabolomics, metatranscriptomics, and metaproteomics—we examined CAZyme presence, distribution, and activity. Despite environmental differences, both soils and sediments harbored diverse glycoside hydrolases and polysaccharide lyases, most of which showed evidence of activity. Verrucomicrobia expressed the highest number of CAZyme transcripts, indicating that they dominated active carbohydrate degradation in fjord sediments, while Acidobacteria and Actinobacteria were more active in soils. Notably, CAZymes in fjord sediments targeted primarily soil-derived OM, and the proportions of enzymes degrading terrestrial OM, marine OM, and microbial necromass—remnants of dead microbial cells were similar across both environments. These results suggest that microbial communities in both soils and fjord sediments are equipped to degrade carbohydrates, and that burial of terrestrial-derived OM in fjord sediments may not protect it from microbial breakdown under Arctic warming.

Chukwufumnanya, Abuah [University of Tennessee, Kn↗
DOE OSTI2020

Geometry and dynamics of lipid membranes: The Scriven-Love number

The equations governing lipid membrane dynamics in planar, spherical, and cylindrical geometries are presented here. Unperturbed and first-order perturbed equations are determined and nondimensionalized. In membrane systems with a nonzero base flow, perturbed in-plane and out-of-plane quantities are found to vary over different length scales. Here, a new dimensionless number, named the Scriven-Love number, and the well-known Föppl–von Kármán number result from a scaling analysis. The Scriven-Love number compares out-of-plane forces arising from the in-plane, intramembrane viscous stresses to the familiar elastic bending forces, while the Föppl–von Kármán number compares tension to bending forces. Both numbers are calculated in past experimental works, and span a wide range of values in various biological processes across different geometries. In situations with large Scriven-Love and Föppl–von Kármán numbers, the dynamical response of a perturbed membrane is dominated by out-of-plane viscous and surface tension forces—with bending forces playing a negligible role. Calculations of non-negligible Scriven-Love numbers in various biological processes and in vitro experiments show in-plane intramembrane viscous flows cannot generally be ignored when analyzing lipid membrane behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

What Determines the Number and the Timing of Pulses in Afternoon Precipitation in the Green Ocean Amazon (GoAmazon) Observations?

Using GoAmazon observations over the central Amazon, we investigate double-pulse events of afternoon precipitation for the first time. Relative humidity is the dominant factor in determining the onset timing and the number of pulses of precipitation. A moister free troposphere on single-pulse days features heavy precipitation in the early afternoon, which stabilizes the atmosphere and prohibits further convection. On early–onset double-pulse days, weaker precipitation from shallower convection in the first pulse leads to less consumption of atmospheric instability, making the environment favorable for a second pulse of stronger precipitation. A cluster tracking algorithm using the scanning radar reflectivity is developed to examine the relationship between precipitation pulses. Through explicitly tracking convective clusters that exist from the first to the second pulse, convective aggregation plays a more dominant role to the survival of clusters with larger final size, and on average around 20% of cluster survivals are due to natural growth.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High temporal resolution generation expansion planning for the clean energy transition

As power systems integrate increasing quantities of wind, solar and energy storage resources, it is important to revisit power system capacity expansion modeling methods and assumptions that have been utilized in thermal- dominated systems. We conduct a series of case study analyses using a simplified representation of the Electric Reliability Council of Texas (ERCOT) system to demonstrate how least-cost capacity expansion outcomes are impacted by changes in model resolution across two temporal dimensions: 1) the number of considered representative periods, and 2) the system dispatch interval. First, we find that the least-cost generation portfolio can differ significantly for small changes in the number of representative days, but largely converges to the 365-day result once 104 representative days are considered. Furthermore, systems with wind, solar and storage resources were more sensitive to changes in the number of representative days than a thermal-dominated system. Second, we find that considering five-minute dispatch resolution consistently results in least-cost generation portfolios with less solar capacity and more energy storage capacity than corresponding scenarios with hourly dispatch intervals. This suggests that hourly dispatch representation fails to capture the intra-hour volatility of solar generation, and therefore also overlooks opportunities for storage resources to provide system value by balancing this volatility. Collectively these results indicate that capacity expansion modelers should revisit conventional approaches to temporal representation when conducting analyses of deeply decarbonized power systems to ensure that such analyses are robust and actionable. To our knowledge, this is the first study to analyze capacity expansion outcomes with five-minute dispatch resolution in this manner.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Measurements of differential cross-sections in four-lepton events in 13 TeV proton-proton collisions with the ATLAS detector

Measurements of four-lepton differential and integrated fiducial cross-sections in events with two same-flavour, opposite-charge electron or muon pairs are presented. The data correspond to 139 fb -1 of $ \sqrt{s} $ = 13 TeV proton-proton collisions, collected by the ATLAS detector during Run 2 of the Large Hadron Collider (2015–2018). The final state has contributions from a number of interesting Standard Model processes that dominate in different four-lepton invariant mass regions, including single Z boson production, Higgs boson production and on-shell ZZ production, with a complex mix of interference terms, and possible contributions from physics beyond the Standard Model. The differential cross-sections include the four-lepton invariant mass inclusively, in slices of other kinematic variables, and in different lepton flavour categories. Also measured are dilepton invariant masses, transverse momenta, and angular correlation variables, in four regions of four-lepton invariant mass, each dominated by different processes. The measurements are corrected for detector effects and are compared with state-of-the-art Standard Model calculations, which are found to be consistent with the data. The Z → 4 ℓ branching fraction is extracted, giving a value of (4.41 ± 0.30) × 10 -6 . Constraints on effective field theory parameters and a model based on a spontaneously broken B – L gauge symmetry are also evaluated. Further reinterpretations can be performed with the provided information.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Conceptual design study of neutron detectors for safeguards measurement of an irradiated pebble

Nuclear material control and accounting (MC&A) of pebble-bed reactors (PBRs) is challenging because a PBR utilizes hundreds of thousands of identical, unmarked pebbles that are continuously recirculated through the core. To develop tools that enable the implementation of international safeguards, especially in the context of MC&A of spent pebbles, we designed and simulated three neutron detection concepts to determine fissile content in individual pebbles: a differential die-away (DDA) detector, a californium interrogation prompt neutron (CIPN) detector, and a passive neutron albedo reactivity (PNAR) detector using Monte Carlo calculations. Burnup calculations were performed on the spent pebbles from the PBMR-400 classic PBR. The varying neutron and gamma source terms, and isotopic compositions in the spent pebbles calculated at various burnup levels were used in the neutron detector models. DDA was found to be sensitive to the number of passes a pebble has had through the core and to the fissile content contained in a spent pebble. Optimization in the DDA design further increased the neutron count rates and thus reduced counting uncertainty. Meanwhile, passive neutron counting using the same detector body could distinguish pebbles with different numbers of passes, but its response was dominated by neutron-emitting actinides and was not sensitive to fissile content. On the other hand, the PNAR technique was not viable for a single pebble but performed reasonably for a 27-pebble array, which suggested potential use for verification measurements of containers filled with 27 or more spent pebbles.

CIPN↗
DOE OSTI2021

Dissipation in the magnetic turbulence of reversed field pinch plasmas

Reversed field pinch plasmas are subject to tearing instability that creates a broad spectrum of magnetic fluctuations. The dominant fluctuations have poloidal and toroidal mode numbers (m,n) = (1,6 - 10) and can grow to 2 - 3% of the mean magnetic field. Through non-linear coupling this growth culminates in a strong reconnection event and broadening of the magnetic spectrum extending to the ion gyroradius scale. Multiple developments occur during the reconnection stage: ions and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases in a sawtooth-like fashion as the RFP dynamo becomes stronger. Magnetic fluctuations are measured in the plasma edge at multiple radial locations from r/a = 0.75 to 0.96 to assess and characterize the magnetic turbulence. The measured spectrum perpendicular to the mean field, S(k ⊥ ), can be fit to a model spectrum consisting of power law and exponential component with one free parameter that characterizes dissipation. The measured dissipation is much larger than estimated from classical viscous or resistive dissipation, but it is consistent with a flow damping measurement of anomalous viscosity. The measurements show an evolution of the spectrum during which fluctuation power builds up in the smallest wavenumbers and cascades to the larger wavenumber due to the non-linear coupling between the linear (m,n) = (1, > 6) and the non-linear (m,n) = (0, 1) tearing mo

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Estimates of the wavenumber wavelet power spectrum of magnetic fluctuations during magnetic reconnection

Fluctuation analyses of experimental observations generally lack high temporal resolution and are in frequency-space f, contrary to theoretical efforts in wavenumber-space k. This is due to the inherent limits of the Fourier transform, though it is prominent due to the ease of diagnostic implementation. Advances in wavelet-based analysis have provided relief due to its temporal resolution, but in its common use, is still hard to compare to theoretical models. By using the two-point correlation technique in conjunction with large data sets, a wavelet power spectrum in wavenumber-space can be created. Dubbed the wavenumber wavelet power spectrum, this spectrum relates wavenumber to power in time. Further, this analysis technique more closely connects characterizations of experimentally observed fluctuations with other system parameters and theoretical predictions. In this article, we develop the wavenumber wavelet power spectrum using magnetic fluctuations caused by tearing instability driven magnetic reconnection in reproducible, high temperature laboratory plasmas. These dynamic magnetic fluctuations generated in reversed field pinch plasmas are broadband, ranging from the low frequency, 10's of kHz, up to the ion gyroradii frequencies, 100's of kHz. The dominant fluctuations have poloidal and toroidal mode numbers (m,n)=(1,6−10) and can grow to 2%–3% of the mean magnetic field. During these reconnection events, ions, and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases, all on a semi-periodic basis. The newly developed spectrum provides better temporal resolution of spectrum characteristics to correlate with these particle energization phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Benchmarking the performance of a high-Q cavity qudit using random unitaries

High-coherence cavity resonators are excellent resources for encoding quantum information in higher-dimensional Hilbert spaces, moving beyond traditional qubit-based platforms. A natural strategy is to use the Fock basis to encode information in qudits. One can perform quantum operations on the cavity mode qudit by coupling the system to a non-linear ancillary transmon qubit. However, the performance of the cavity-transmon device is limited by the noisy transmons. It is, therefore, important to develop practical benchmarking tools for these qudit systems in an algorithm-agnostic manner. We gauge the performance of these qudit platforms using sampling tests such as the heavy output generation test as well as the linear cross-entropy benchmark, by way of simulations of such a system subject to realistic dominant noise channels. We use selective number-dependent arbitrary phase and unconditional displacement gates as our universal gateset. Our results show that contemporary transmons comfortably enable controlling a few tens of Fock levels of a cavity mode. This framework allows benchmarking even higher dimensional qudits as those become accessible with improved transmons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

General trends of superconducting pairing and magnetic correlations in the Ruddlesden-Popper nickelate 𝑚-layered superconductors La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1

Here, we report a comprehensive theoretical analysis of the Ruddlesden-Popper layered nickelates La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 (𝑚 = 1 to 6) under pressure. These materials have recently received significant attention due to the discovery of superconductivity in some nickelates under pressure. Our results suggest that, while these Ruddlesden-Popper layered nickelates display many similarities, they also show noticeable differences. One of the common features of La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 is that the electronic states near the Fermi level are mainly contributed by Ni 3⁢𝑑 orbitals, slightly hybridized with O 2⁢𝑝 orbitals. The Ni 𝑑 3⁢𝑧 2 −𝑟 2 orbitals display bonding-antibonding, or bonding-antibonding-nonbonding, characteristic splittings, depending on the even or odd number of stacking layers 𝑚. In addition, the ratio of the in-plane interorbital hopping between 𝑑 3⁢𝑧 2 −𝑟 2 and 𝑑 𝑥 2 −𝑦 2 orbitals and in-plane intraorbital hopping between 𝑑 𝑥 2 −𝑦 2 orbitals was found to be large in La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 (𝑚 = 1 to 6), and this ratio increases from 𝑚 = 1 to 𝑚 = 6, suggesting that the in-plane hybridization will increase as the layer number 𝑚 increases. In contrast to the dominant 𝑠 ± -wave state driven by spin fluctuations in the bilayer La 3 ⁢Ni 2⁢ O 7 and trilayer La 4 ⁢Ni 3 ⁢O 10 , two nearly degenerate 𝑑 𝑥 2 −𝑦 2 -wave and 𝑠 ± -wave leading states were obtained in the four-layer stacking La 5⁢ Ni 4 ⁢O 13 and five-layer stacking La 6 ⁢Ni 5 ⁢O 16 . The leading 𝑠 ± -wave state was recovered in the six-layer material La 7 ⁢Ni 6 ⁢O 19 with slightly higher calculated pairing strength 𝜆 than that of the 𝑑 𝑥 2 −𝑦 2 -wave state. All this evidence suggests that both 𝑠 ± -wave and 𝑑 𝑥 2 −𝑦 2 -wave channels are strongly competing in the high-order niceklates based on our random-phase approximation calculations. In general, at the level of the random-phase approximation treatment, the superconducting transition temperature 𝑇 𝑐 decreases in stoichiometric bulk systems from the bilayer La 3 ⁢Ni 2 ⁢O 7 to the six-layer La 7 ⁢Ni 6 ⁢O 19 , despite the 𝑚-dependent dominant pairing. Both in-plane and out-of-plane magnetic correlations are found to be quite complex. Within the in-plane direction, we obtained the peak of the magnetic susceptibility at 𝐪 = (0.6⁢𝜋, 0.6⁢𝜋) for La 5 ⁢Ni 4 ⁢O 13 (𝑚 = 4) and La 7 ⁢Ni 6 ⁢O 19 (𝑚 = 6) and at 𝐪 = (0.7⁢𝜋, 0.7⁢𝜋) for La 6⁢ Ni 5⁢ O 16 (𝑚 = 5). Along the out-of-plane direction, four layers are coupled as ↓−↑−↑−↓ in La 5 ⁢Ni 4⁢ O 13 , five layers are coupled as ↑−↑−↓−↑−↑ in La 6 ⁢Ni 5 ⁢O 16 , and six layers are coupled as ↑−↓−↓−↑−↑−↓ in La 7 ⁢Ni 6 ⁢O 19 .

Zhang, Yang [Univ. of Tennessee, Knoxville, TN (Un↗
DOE OSTI2022

Measurements of Proton High-Order Cumulants in s N N = 3 GeV Au + Au Collisions and Implications for the QCD Critical Point

We report cumulants of the proton multiplicity distribution from dedicated fixed-target Au + Au collisions at $\sqrt{s_{NN}}$ = 3.0 GeV , measured by the STAR experiment in the kinematic acceptance of rapidity ( y ) and transverse momentum ( p T ) within - 0.5 < y < 0 and 0.4 < pT < 2.0 GeV / c . In the most central 0%–5% collisions, a proton cumulant ratio is measured to be C 4 / C 2 = - 0.85 ± 0.09 ( stat ) ± 0.82 ( syst ) , which is 2 σ below the Poisson baseline with respect to both the statistical and systematic uncertainties. The hadronic transport UrQMD model reproduces our C 4 / C 2 in the measured acceptance. Compared to higher energy results and the transport model calculations, the suppression in C 4 / C 2 is consistent with fluctuations driven by baryon number conservation and indicates an energy regime dominated by hadronic interactions. These data imply that the QCD critical region, if created in heavy-ion collisions, could only exist at energies higher than 3 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Elucidating the Molecular Origins of the Transference Number in Battery Electrolytes Using Computer Simulations

The rate at which rechargeable batteries can be charged and discharged is governed by the selective transport of the working ions through the electrolyte. Conductivity, the parameter commonly used to characterize ion transport in electrolytes, reflects the mobility of both cations and anions. The transference number, a parameter introduced over a century ago, sheds light on the relative rates of cation and anion transport. This parameter is, not surprisingly, affected by cation–cation, anion–anion, and cation–anion correlations. In addition, it is affected by correlations between the ions and neutral solvent molecules. Computer simulations have the potential to provide insights into the nature of these correlations. We review the dominant theoretical approaches used to predict the transference number from simulations by using a model univalent lithium electrolyte. In electrolytes of low concentration, one can obtain a quantitative model by assuming that the solution is made up of discrete ion-containing clusters–neutral ion pairs, negatively and positively charged triplets, neutral quadruplets, and so on. These clusters can be identified in simulations using simple algorithms, provided their lifetimes are sufficiently long. In concentrated electrolytes, more clusters are short-lived and more rigorous approaches that account for all correlations are necessary to quantify transference. Elucidating the molecular origin of the transference number in this limit remains an unmet challenge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The interplay of additivity, dominance, and epistasis on fitness in a diploid yeast cross

In diploid species, genetic loci can show additive, dominance, and epistatic effects. To characterize the contributions of these different types of genetic effects to heritable traits, we use a double barcoding system to generate and phenotype a panel of ~200,000 diploid yeast strains that can be partitioned into hundreds of interrelated families. This experiment enables the detection of thousands of epistatic loci, many whose effects vary across families. Here, we show traits are largely specified by a small number of hub loci with major additive and dominance effects, and pervasive epistasis. Genetic background commonly influences both the additive and dominance effects of loci, with multiple modifiers typically involved. The most prominent dominance modifier in our data is the mating locus, which has no effect on its own. Our findings show that the interplay between additivity, dominance, and epistasis underlies a complex genotype-to-phenotype map in diploids.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Cooperative effect of local active stresses on the macroscopic contractility of elastic fiber networks

The collective action of actively contractile units embedded in elastic biopolymer networks plays a crucial role in regulating the network's macroscopic mechanical response. Here, in this study, we investigate how the macroscopic boundary stress in model elastic fiber networks depends on the number and nature of embedded contractile units, each exerting an isotropic force dipole, as well as on the bending stiffness of fibers. We find that the macroscopic stress increases nonlinearly with the number of dipoles due to mutual stiffening of initially soft, bending-dominated networks. Using effective medium theory, we relate this enhanced contractility to an increase in the effective average network coordination number due to constraints imposed by the force dipoles. By comparing three distinct force dipole models that differ in their local structures, we demonstrate that the specific manner in which an active unit constrains the network strongly influences the onset and nature of the stiffening transition. Our results highlight that not only the quantity but also the local geometry of force-generating units critically determines the macroscopic mechanical behavior. This framework provides a physical basis for understanding how biological systems—such as molecular motors in the cytoskeleton, or adherent cells in the extracellular matrix—can modulate network-scale nonlinear elastic properties through local tuning of active force-generating units.

Biological and medical sciences↗
DOE OSTI2021

Validation of the HyRAM+ physics models for use with propane

The Hydrogen Risk Assessment Model Plus (HyRAM+) toolkit combines quantitative risk assessment with simulations of unignited dispersion, ignited turbulent diffusion flames, and indoor accumulation with delayed ignition of fuels. HyRAM+ is differentiated from HyRAM in that it includes models and leak data for other alternate fuels. The models of the physical phenomena need to be validated for each of the fuels in the toolkit. This report shows the validation for propane which is being used as a surrogate for autogas, which is a mixture of propane and butane and used in internal combustion engines in vehicles. For flame length comparisons, five previously published experiments from peer reviewed journals were used to validate our models. The validation looked at flame lengths and flame widths with respect to different leak diameters, mass flow rates, and source pressures. Most of the sources included more than one set of experimental data, which were collected using different methods (CCD cameras, IR visualization etc.). In general, HyRAM+ overpredicts the flame lengths by around 65%. For heat and radiation models, we compared the heat flux and radiation data reported from two different sources to the values calculated by HyRAM+. For higher mass flow rates, the HyRAM+ calculated flame length results gave a better estimate of what is found in the experiments (65% error), but a higher error (85%) is observed between the HyRAM+ calculated lengths and the experimental flame lengthsfor lower mass flows. Some differences can be attributed to outdoor environmental effects (i.e. wind speed) and uncertainties in jet flame shapes. The propane flame trajectory is predicted for a high Reynolds number case with Re = 12,500 and a low Reynolds number case where Re = 2,000. The Re=12,500 case which is momentum dominated matches well with the experimental flame trajectory, but the agreement for the bouancy driven low Reynolds number case is not as good. Dispersion modeling for unignited propane was also analyzed. We compared the mole fraction, mixture fraction, mean velocity, concentration half width, and inverse mass concentration over an axial distance from different credible journals to the values calculated by HyRAM+. The results display good agreement but generally, HyRAM+ predicts a wider profile for mole fraction and mixture fraction experiments. Overall, HyRAM+’s results are reasonable for predicting the flame length, heat flux, flame trajectory, and dispersion for propane and can be used in risk analyses

08 HYDROGEN↗