Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dodecane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

In Situ Monitoring and Kinetic Analysis of the Extraction of Nitric Acid by Tributyl Phosphate in n-Dodecane using Raman Spectroscopy

Understanding the fundamental rates of transfer and complex formation is crucial in maintaining optimal efficiency and effectivity in solvent extraction. Methodologies to effectively analyze solvent extraction systems are lacking in that they are commonly off-line. Thus, a method to effectively investigate solvent extraction systems in a Lewis cell using in situ Raman spectroscopy paired with chemometric modelling has been developed to allow for on-line analysis and monitoring. Kinetic parameters of interfacial mass transfer for the extraction of nitric acid by tributyl phosphate, a process crucial to used nuclear fuel reprocessing, were measured in by spectroscopic monitoring of both phases simultaneously in a two-phase solvent extraction system. Resulting concentration data, derived from a chemometric model using Raman spectra as the base set, allowed for the calculation of kinetic parameters in the system when paired with extraction time. The forward and reverse interfacial mass transfer coefficients, kf and kr, were determined for solutions that were process relevant and of pro-cess interest, where kf was calculated as 5.3 (± 0.3) × 10-3 cm min 1 and kr was calculated as 2.9 (± 0.2) × 10-2 cm min-1. The information obtained regarding solvent extraction parameters and transfer can be applied in the further study of systems of higher complexity involving complex formation and their transfer across a liquid:liquid interface.

extraction, interfacial transport, Lewis Cell, Liq↗

Optical Spectroscopic Investigation of Hexavalent Actinide Ions in n-Dodecane Solutions of Tri-butyl Phosphate

The extraction of hexavalent actinides An(VI) by tri-butyl phosphate (TBP) was investigated by electronic absorption and vibrational spectroscopies. Through a series of spectral subtractions, vibrational spectra associated with TBP, TBP–HNO3 adducts, and An(VI)–TBP complexes could be isolated. Investigation of U(VI) extracts indicated spectral features consistent with the formation of the expected [UO2(NO3)2(TBP)2] complex, but spectral features of other species were clearly evident. Likewise, multiple species were evident in the electronic absorption and vibrational spectra of TBP phases generated by extraction of Pu(VI). Although definitive characterization of the additional species formed could not be achieved in this work, it is hypothesized that they contain 3:1 TBP-to-An(VI) stoichiometry.

Lumetta, Gregg J.↗

A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications

A mixture of n-dodecane and m-xylene is investigated as a diesel fuel surrogate for compression ignition engine applications. Compared to neat n-dodecane, this binary mixture is more representative of diesel fuel because it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. A detailed multi-component mechanism for n-dodecane and m-xylene was developed by combining a previously developed n-dodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine and shock tube, speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in shock tubes and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRG-X) and DRG-aided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of n-dodecane and 23% m-xylene by volume. The sample space for the reduction covered pressure of 1 – 80 bar, equivalence ratio of 0.5 – 2.0, and initial temperature of 700 – 1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the Engine Combustion Network (ECN) website. These multidimensional simulations were performed using a Representative Interactive Flame (RIF) turbulent combustion model. In conclusion, encouraging results were obtained compared to the experiments with regards to the predictions of ignition delay and lift-off length at different ambient temperatures.

30 DIRECT ENERGY CONVERSION↗

Insight into the Radiolytic Degradation Mechanism of TODGA

Partitioning and transmutation schemes, where americium is separated from other components of used nuclear fuel and burned in a fast neutron reactor, offer a path to dramatically decrease the space requirements for storage of nuclear fuel cycle wastes, allowing more efficient usage of potentially scarce storage resources.[1] Improvements in the efficiency of processes for separating americium from used nuclear fuels can thus have a significant impact on the costs of future nuclear fuel cycles. Understanding separation ligand radiation chemistry is important for development of new ligands and processes, as the ligand degradation products can have a deleterious effect on a separation process. Tetraoctyl diglycolamide (TODGA) has been studied as a ligand for lanthanide/minor actinide extraction for partitioning and transmutation schemes. However, the mechanism of initial energy transfer from products of solvent radiolysis to TODGA is still under debate. One proposed mechanism is attack by a n-dodecane radical cation resulting in electron abstraction and formation of a TODGA radical cation,[2] while later work has proposed hydrogen abstraction from sites adjacent to the central ether oxygen by other radical species.[3] The latter mechanism is proposed to result in degradation products from rupture of the ether bond. However, radiolytic degradation of TODGA in n-dodecane shows products that would result from rupture of all the backbone bonds. There is little information on what degradation products would be expected to form from the TODGA radical cation. In this work, we have begun to investigate this by examining the electron impact (EI) ionization mass spectrum of TODGA, which initially produces a TODGA radical cation in the gas phase. The EI spectrum shows fragments that would result from most backbone bond cleavages, similar to what is observed in the radiolysis of TODGA in n-dodecane. As the lifetime of the solvent radical cation decreases from n-dodecane to n-hexane,[4] irradiation of TODGA in n-hexane should have less solvent radical cations available for reaction with TODGA, and instead should favor reactions with longer-lived radicals. In contrast to n-dodecane, radiolytic degradation of TODGA in n-hexane produces only N,N-dioctylacetamide, which would result from rupture of the ether bond. The n-dodecane radical cation lifetime is long enough to produce TODGA radical cations but the n-hexane radical cation is mostly consumed before reaction with TODGA, so other radical processes that abstract hydrogen from TODGA dominate. This suggests that electron abstraction by the n-dodecane radical cation is an important component of TODGA radiolysis, although it does not rule out the presence of mechanisms involving hydrogen abstraction adjacent to the ether oxygen. References [1] J. Serp et al., Energies 2017, 10 (9), DOI: 10.3390/en10091445. [2] C. Zarzana et al., Solvent Extr. Ion Exch. 2015, 33 (5), 431–447, DOI: 10.1080/07366299.2015.1012885. [3] T. Koubský et al., Prog. Nucl. Energy 2017, 94, 208–215, DOI: 10.1016/j.pnucene.2016.07.010. [4] F. Sviridenko et al., Chem. Phys. Lett. 1998, 297 (3), 343–349, DOI: 10.1016/S0009-2614(98)01099-9.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Oil effect on CO 2 foam stabilized by a switchable amine surfactant at high temperature and high salinity

Despite the possible detrimental effect of oil on foam displacement processes in CO 2 EOR the effect of oil on dense CO 2 foams has received little attention relative to air foams or low density CO 2 foams. Herein, the effect of both a first contact miscible hydrocarbon (dodecane) and crude oil on CO 2 /water (C/W) foams generated by a switchable surfactant, C 12–14 N(EO) 2 was examined at dense CO 2 conditions at temperatures up to 120 °C (393 K) and 3400 psia (23 MPa). Upon increasing the fractional flow of dodecane, a gradual decrease in foam viscosity was observed as the foam becomes unstable. Since only two phases are present, traditional destabilization mechanisms for three phase oil/gas/water systems based on the entering and spreading are invalid. Therefore, an alternative mechanism is suggested whereby added dodecane strengthen the surfactant tail interactions with the nonaqueous phase (mixture of CO 2 and dodecane) to shift the hydrophilic-CO 2 philic balance (HCB) towards an unstable region. This mechanism is supported by a decrease of the CO 2 –water interfacial tension from ~5 mN/m to 0.5 mN/m for dodecane–water systems at 120 °C and 3400 psia. The effect of crude oil was more profound than for dodecane, whereby rapid destabilization of foam occurred at an oil fractional flow as low as 0.2. In this case, the immiscible portion of the crude oil can enter and spread at the lamellae to destabilize the foam as is evident in positive entering and spreading coefficients. Also, other foam destabilizing parameters such as temperature and capillary pressure were studied in the presence of oil and the results were consistent with those in the absence of oil.

nuclear (including radiation effects), carbon sequ↗

Effects of Multicomponent Hydrocarbon Feed on Hydrocarbon Adsorption–Desorption and Oxidation Light-Off Behavior on a Pd/BEA Hydrocarbon Trap

A model hydrocarbon trap material consisting of palladium promoted zeolite beta on a monolith core was studied with a multicomponent hydrocarbon feed. Dodecane and ethylene adsorption, followed by temperature programmed oxidation (TPO), was used in the presence of CO in wet and dry conditions to study the impact of various species on hydrocarbon storage, oxidation, and desorption. Low temperature adsorption experiments were used to quantify hydrocarbon storage capacity, while temperature programmed desorption (TPD) and TPO studies were used to investigate both oxidation and desorption of the various hydrocarbon species. Here, the low temperature adsorption experiments suggest a moderate impact of water on dodecane uptake as dry experiments adsorbed more dodecane overall than those under wet conditions. Additionally, the presence of CO and ethylene also impaired dodecane uptake. TPD studies indicated a coupled relationship between hydrocarbon oxidation light-off and desorption. By varying the composition of the feed, specifically via the inclusion of CO or ethylene, dodecane oxidation light-off was delayed, which actually increased the overall hydrocarbon trap efficiency.

42 ENGINEERING↗

Large eddy simulation of a reacting spray flame with multiple realizations under compression ignition engine conditions

An n-dodecane spray flame (Spray A from Engine Combustion Network) was simulated using a detailed combustion model along with a dynamic structure LES model to evaluate its performance at engine-relevant conditions and understand the transient behavior of this turbulent flame. The liquid spray was treated with a traditional Lagrangian method and the gas-phase reaction was modeled using a detailed combustion model. A 103-species skeletal mechanism was used for the n-dodecane chemical kinetic model. Significantly different flame structures and ignition processes are observed for the LES compared to those of RANS predictions. The LES data suggests that the first ignition initiates in lean mixture and propagates to rich mixture, and the main ignition happens in rich mixture, preferable less than 0.14 in mixture fraction space. LES was observed to have multiple ignition spots in the mixing layer simultaneously while the main ignition initiates in a clearly asymmetric fashion. The temporal flame development also indicates the flame stabilization mechanism is auto-ignition controlled and modulated by flame propagation. Soot predictions by LES present much better agreement with experiments compared to RANS both qualitatively and quantitatively. Multiple realizations for LES were performed to understand the realization to realization variation and to establish best practices for ensemble-averaging diesel spray flames. The relevance index analysis suggests that an average of 2 and 5 realizations can reach 99\% of similarity to the target average of 16 realizations on the temperature and mixture fraction fields, respectively. However, more realizations are necessary for OH and soot mass fraction due to their high fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gamma Radiolysis of Phenyl-Substituted TODGAs: Part I

The radiolytic stabilities of three phenylated analogs of N,N,N’,N’-tetraoctyl diglycolamide (TODGA) were investigated: 2-(2-(di-n-octylamino)-2-oxoethoxy)-N,N-di-n-octyl-2-phenylacetamide (PhTODGA), which has a phenyl substituent bound to a central methylene, 2-(2-(di-n-octylamino)-2-oxo-1-phenylethoxy)-N,N-di-n-octylpropanamide (PhMeTODGA), which also contains a methyl substituent bound to the methylene on the other side of the ether moiety, and, 2-(2-N-n-hexyl-N-phenylamino)-2-oxoethoxy)-N-n-hexyl-N-phenylacetamide (DHDPDGA), which has phenyl substituents located on the amide groups instead of the central methylenes. The objective of Part I of this series of papers covers was to evaluate the contribution of the phenyl group to the radiolytic stability of these diglycolamides when irradiated in a) n-dodecane, and b) n-dodecane in the presence of a nitric acid-containing aqueous phase. The results indicate that the presence of the phenyl group decreases the overall radiolytic stability compared to unsubstituted TODGA. However, the results also indicate that the phenyl groups interact with nitric acid in a cooperative fashion that enhances the radiation stability of the phenylated diglycolamide (DGA) derivatives in the presence of a nitric acid-containing aqueous phase compared to irradiation in only n-dodecane. So, the results are consistent with the hypothesized formation of nitric acid-phenylated DGA complexes in the n-dodecane phase that are significantly more stable with respect to gamma irradiation, compared to the phenylated DGA molecules alone.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solvent-Induced Selectivity of Isoprene From Bio-Derived Prenol

In this work we demonstrate the selective catalytic conversion of prenol, which is an allylic alcohol that can be prepared from renewable resources to isoprene. The catalyst is an inexpensive molybdenum complex (Molyvan L) designed and used as an additive for lubricants. Isoprene is generated under relatively mild reaction parameters at 130–150°C, for 2 h, under vapor pressure conditions that do not exceed 50 psi. Two cases were studied: one in which Molyvan L was dissolved in a base oil at 1% concentration (weight/weight) and then mixed with a solvent and prenol and the other in which neat Molyvan L was introduced in the reaction and the base oil was replaced with the solvent and prenol. We investigated the selectivity of the reaction using the following solvents in both cases: dodecane, dodecanol, isododecane, octane, blendstock for oxygenate blending (BOB3), a fuel surrogate, a polyalphaolefin (PAO4), and methoxy polyethylene glycol (methoxy PEG350). Although conversion of prenol was above 94% in all experiments, isoprene was formed with various degrees of efficiency alongside a prenol isomeric alcohol, diprenyl ether and mixed ether via intramolecular and intermolecular dehydration reactions. Dodecane appeared to have the highest level of selectivity initially in base oil so we studied the effect of various dodecane-like solvents on isoprene yield and product profile. Surprisingly, octane (similar to dodecane) and isododecane (branched alkane) generated insignificant amounts of byproducts, essentially providing the highly desired isoprene with a very high selectivity. Branching of the solvent does not appear to have an effect on selectivity. Another advantage of this catalyst is the low loadings required to effect the transformation; that is, 0.25% (weight/volume) in the cases using neat Molyvan L and 0.5% (weight/volume) in the cases using Molyvan L dissolved in the base oil. Provided that prenol can be produced in large scale from bioresources, this work would enable the sustainable production of isoprene, in good yield, and with very high selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗