Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Cation–Ligand Interactions Dictate Salt Partitioning and Diffusivity in Ligand-Functionalized Polymer Membranes

Membranes are an attractive alternative to current thermal separations due to their scalability and energy efficiency in desalinating water. Unfortunately, many of the conventional membrane materials available today are unable to differentiate between ionic solutes, especially alkali cations, compromising their use in ion–ion separations. Inspired by the ion-specific interactions exhibited by biological ion channels, recent research efforts have focused on synthesizing and characterizing new polymeric materials that incorporate ligands into polymer networks to bias solubility and/or diffusivity of one cationic species over another. Despite these efforts, little is known about the influence of incorporating ligands into polymer membranes on solubility and diffusivity of the complexing species. In this study, we first build a qualitative model of salt partitioning, diffusivity, and permeability in generic cation-complexing ligand-functionalized polymer membranes. Next, to validate our model and hypotheses, we perform atomistic molecular dynamics simulations of a 12-crown-4-functionalized membrane in the presence of alkali halide salts at low concentration. Generally, cation complexation enhances cation solubility but decreases diffusivity. Interestingly, the reduction in diffusivity is predicted to be larger than the enhancement in solubility for materials which operate by the mechanisms proposed in our physical picture, ultimately resulting in a reduction in the permeability of the selectively complexing ion.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Multicomponent diffusion in molten salt NaF-ZrF{sub 4}: Dynamical correlations and Maxwell–Stefan diffusivities

NaF-ZrF{sub 4} is used as a waste incinerator and as a coolant in Generation IV reactors.Structural and dynamical properties of molten NaF-ZrF{sub 4} system were studied along with Onsagercoefficients and Maxwell–Stefan (MS) Diffusivities applying Green–Kubo formalism and molecular dynamics (MD) simulations. The zirconium ions are found to be 8 fold coordinated with fluoride ions for all temperatures and concentrations. All the diffusive flux correlations show back-scattering. Even though the MS diffusivities are expected to depend very lightly on the composition because of decoupling of thermodynamic factor, the diffusivity Đ{sub Na-F} shows interesting behavior with the increase in concentration of ZrF{sub 4}. This is because of network formation in NaF-ZrF{sub 4}. Positive entropy constraints have been plotted to authenticate negative diffusivities observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

FY18Q2 Quarterly Report: Radiation Enhanced Diffusion of Ag, Ag-Pd, Eu, and Sr in Neutron Irradiated PyC/SiC Diffusion Couples

Obtaining accurate diffusion kinetics in materials representative of those found in tristructural-isotopic (TRISO) coated particle fuel is needed to predict the diffusive release of fission products in reactor. Planar diffusion couples with representative pyrocarbon (PyC) and silicon carbide (SiC) layers are being produced using the same fluidized-bed chemical vapor deposition (FBCVD) technology used to produce TRISO particles from the first irradiation experiment of the Advanced Gas Reactor (AGR) Fuel Qualification and Development Program. The layer properties of the planar diffusion couples are tailored to meet the specified PyC density and microstructure of the SiC layer as defined by the AGR program. The influence of these variables on diffusion is also being explored by producing PyC and SiC variants.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

On the enhancement of Er{sup 3+} diffusion in LiNbO{sub 3} crystals by Er{sup 3+}/Ti{sup 4+} co-diffusion

Highlights: • Enhancement of the diffusion of erbium ions (Er{sup 3+}) in lithium niobate crystals. • Incoherence on published results lead to need for systematic revision of literature. • Further insight into the topic of co-diffusion of Er{sup 3+}/Ti{sup 4+} ions into LiNbO{sub 3}. - Abstract: After carrying out a revision of the literature on the enhancement of Er{sup 3+} diffusion in LiNbO{sub 3} crystals by Er{sup 3+}/Ti{sup 4+} co-diffusion and analyzing our own experimental results, we conclude that no reproducible results were reported, meaning that further research on this subject is necessary.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Origin of Unusual Acidity and Li+ Diffusivity in a Series of Water-in-Salt Electrolytes.

Superconcentrated aqueous electrolytes ("water-in-salt" electrolytes, or WiSEs) enable various aqueous battery chemistries beyond the voltage limits imposed by the Pourbaix diagram of water. However, their detailed structural and transport properties remain unexplored and could be better understood through added studies. Here, we report on our observations of strong acidity (pH 2.4) induced by lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) at superconcentration (at 20 mol/kg). Multiple nuclear magnetic resonance (NMR) and pulsed-field gradient (PFG) diffusion NMR experiments, density functional theory (DFT) calculations, and molecular dynamics (MD) simulations reveal that such acidity originates from the formation of nanometric ion-rich structures. The experimental and simulation results indicate the separation of water-rich and ion-rich domains at salt concentrations >= 5 m and the acidity arising therefrom is due to deprotonation of water molecules in the ion-rich domains. As such, the ion-rich domain is composed of hydrophobic -CF3 (of TFSI-) and hydrophilic hydroxyl (OH-) groups. At 20 m concentration, the tortuosity and radius of water diffusion channels are estimated to be similar to 10 and similar to 1 nm, respectively, which are close to values obtained from hydrated Nafion membranes that also have hydrophobic polytetrafluoroethylene (PTFE) backbones and hydrophilic channels consisting of SO3- ion cluster networks providing for the transport of ions and water. Thus, we have discovered the structural similarity between WiSE and hydrated Nafion membranes on the nanometer scale.

Han, Kee Sung↗
DOE OSTI2019

Screening Diffusion of Small Molecules in Flexible Zeolitic Imidazolate Frameworks Using a DFT-Parameterized Force Field

Quantitatively modeling adsorbate diffusion through zeolitic imidazolate frameworks (ZIFs) must account for the inherent flexibility of these materials. Here, the lack of a transferable intramolecular ZIF force field (FF) for use in classical simulations has previously made an accurate simulation of adsorbate diffusion in many ZIFs impossible. We resolve this problem by introducing a density functional theory parameterized force field (FF) for ZIFs named the intraZIF-FF, which includes perturbations to the class I force fields previously used to model ZIFs. This FF outperforms ad hoc force fields at predicting ab initio relative energies and atomic forces taken from fully periodic ab initio molecular dynamics simulations of SALEM-2, ZIF-7, ZIF-8, and ZIF-90. We use the intraZIF-FF to predict the infinite dilution self-diffusion coefficients of 30 adsorbates with molecular diameters ranging from 2.66 to 7.0 Å in these 4 ZIFs. These results greatly increase the number of adsorbates for which accurate information about molecular diffusion in ZIFs is available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Importance of hydrophobic traps for proton diffusion in lyotropic liquid crystals

The diffusion of protons in self-assembled systems is potentially important for the design of efficient proton exchange membranes. In this work, we study proton dynamics in a low-water content, lamellar phase of a sodium-carboxylate gemini surfactant/water system using computer simulations. The hopping of protons via the Grotthuss mechanism is explicitly allowed through the multi-state empirical valence bond method. We find that the hydronium ion is trapped on the hydrophobic side of the surfactant-water interface, and proton diffusion then proceeds by hopping between surface sites. The importance of hydrophobic traps is surprising because one would expect the hydronium ions to be trapped at the charged headgroups. The physics illustrated in this system should be relevant to the proton dynamics in other amphiphilic membrane systems, whenever there exist exposed hydrophobic surface regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

System-size corrections for self-diffusion coefficients calculated from molecular dynamics simulations: The case of CO{sub 2}, n-alkanes, and poly(ethylene glycol) dimethyl ethers

Molecular dynamics simulations were carried out to study the self-diffusion coefficients of CO{sub 2}, methane, propane, n-hexane, n-hexadecane, and various poly(ethylene glycol) dimethyl ethers (glymes in short, CH{sub 3}O–(CH{sub 2}CH{sub 2}O){sub n}–CH{sub 3} with n = 1, 2, 3, and 4, labeled as G1, G2, G3, and G4, respectively) at different conditions. Various system sizes were examined. The widely used Yeh and Hummer [J. Phys. Chem. B 108, 15873 (2004)] correction for the prediction of diffusion coefficient at the thermodynamic limit was applied and shown to be accurate in all cases compared to extrapolated values at infinite system size. The magnitude of correction, in all cases examined, is significant, with the smallest systems examined giving for some cases a self-diffusion coefficient approximately 15% lower than the infinite system-size extrapolated value. The results suggest that finite size corrections to computed self-diffusivities must be used in order to obtain accurate results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Statistical theory of diffusion in concentrated bcc and fcc alloys and concentration dependencies of diffusion coefficients in bcc alloys FeCu, FeMn, FeNi, and FeCr

The statistical theory of diffusion in concentrated bcc and fcc alloys with arbitrary pairwise interatomic interactions based on the master equation approach is developed. Vacancy–atom correlations are described using both the second-shell-jump and the nearest-neighbor-jump approximations which are shown to be usually sufficiently accurate. General expressions for Onsager coefficients in terms of microscopic interatomic interactions and some statistical averages are given. Both the analytical kinetic mean-field and the Monte Carlo methods for finding these averages are described. The theory developed is used to describe sharp concentration dependencies of diffusion coefficients in several iron-based alloy systems. For the bcc alloys FeCu, FeMn, and FeNi, we predict the notable increase of the iron self-diffusion coefficient with solute concentration c, up to several times, even though values of c possible for these alloys do not exceed some percent. For the bcc alloys FeCr at high temperatures T ≳ 1400 K, we show that the very strong and peculiar concentration dependencies of both tracer and chemical diffusion coefficients observed in these alloys can be naturally explained by the theory, without invoking exotic models discussed earlier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Linking basin-scale and pore-scale gas hydrate distribution patterns in diffusion-dominated marine hydrate systems: DIFFUSION-DRIVEN HYDRATE GROWTH IN SANDS

The goal of this study is to computationally determine the potential distribution patterns of diffusion-driven methane hydrate accumulations in coarse-grained marine sediments. Diffusion of dissolved methane in marine gas hydrate systems has been proposed as a potential transport mechanism through which large concentrations of hydrate can preferentially accumulate in coarse-grained sediments over geologic time. Using one-dimensional compositional reservoir simulations, we examine hydrate distribution patterns at the scale of individual sand layers (1 to 20 m thick) that are deposited between microbially active fine-grained material buried through the gas hydrate stability zone (GHSZ). We then extrapolate to two- dimensional and basin-scale three-dimensional simulations, where we model dipping sands and multilayered systems. We find that properties of a sand layer including pore size distribution, layer thickness, dip, and proximity to other layers in multilayered systems all exert control on diffusive methane fluxes toward and within a sand, which in turn impact the distribution of hydrate throughout a sand unit. In all of these simulations, we incorporate data on physical properties and sand layer geometries from the Terrebonne Basin gas hydrate system in the Gulf of Mexico. We demonstrate that diffusion can generate high hydrate saturations (upward of 90%) at the edges of thin sands at shallow depths within the GHSZ, but that it is ineffective at producing high hydrate saturations throughout thick (greater than 10 m) sands buried deep within the GHSZ. As a result, we find that hydrate in fine-grained material can preserve high hydrate saturations in nearby thin sands with burial.

03 NATURAL GAS↗
DOE OSTI2021

Role of surface diffusion in formation of unique reactivity for graphite oxidation: Time-resolved measurements in a pulsed diffusion reactor

Quantification of oxidation kinetics is essential to develop graphitic materials for diverse applications: from refractories found in gas-cooled nuclear reactors to catalysts needed for chemical manufacturing. In this work, using well-defined highly oriented pyrolytic graphite, low-pressure isotopic transient experiments combined with controlled annealing periods, we resolve the role of surface diffusion and quantify oxidation kinetics with nanomole-precision. We observe an unexpected increase in reactivity following annealing which is explained by the role of surface diffusion increasing the probability for trapping mobile oxygen at more reactive edge sites. Here, the locus of adsorption and spillover to the basal plane is distinct from the trapping location creating a more active oxygen species. Isotopic products reflect the population dynamics of oxygen added at the edge and surface diffusion that relocates basal plane oxygen to more reactive edge sites. Since this process proceeds in parallel with direct oxidation reactions, it is not likely to be observed using steady-state or conventional ‘bulk’ characterization techniques. Our unique time-resolved non-equilibrium measurement in a well-defined transport regime, enables observation of three distinct behaviors: short-term deactivation due to the balance of rates in oxygen supply/product formation, reactivity increases due to surface diffusion and longer-term reactivity increase with oxygen accumulation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Impact of microbial iron oxide reduction on the transport of diffusible tracers and non-diffusible nanoparticles in soils

In subsurface bioremediation, electron donor addition promotes microbial Fe(III)-oxide mineral reduction that could change soil pore structure, release colloids, and alter soil surface properties. These processes in turn may impact bioremediation rates and the ultimate fate of contaminants. Columns packed with water-stable, Fe-oxide-rich soil aggregates were infused with acetate-containing artificial groundwater and operated for 20 d or 60 d inside an anoxic chamber. Soluble Fe(II) and soil colloids were detected in the effluent within one week after initiation of the acetate addition, demonstrating Fe(III)-bioreduction and colloid formation. Diffusible Br-, less diffusible 2,6-difluorobenzoate (DFBA), and non-diffusible silica-shelled silver nanoparticles (SSSNP) were used as tracers in transport experiments before and after the bioreduction. The transport of Br- was not influenced by the bioreduction. DFBA showed earlier breakthrough and less tailing after the bioreduction, suggesting alterations in flow paths and soil surface chemistry during the 20-d bioreduction treatment. Similarly, the bioreduction increased the transport of SSSNP very significantly, with mass recovery increasing from 1.7% to 25.1%. Unexpectedly, the SSSNP was completely retained in the columns when the acetate injection was extended from 20 to 60 d, while the mass recovery of DFBA decreased from 89.1% to 84.1% and Br - showed no change. The large change in the transport of SSSNP was attributed to soil aggregate breakdown and colloid release (causing mechanical straining of SSSNP) and the exposure of iron oxide surfaces previously unavailable within aggregate interiors (facilitating attachment of SSSNP). Finally, these results suggest a time-dependent fashion of microbial effect on the transport of diffusivity-varying tracers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Influence of Hydrogen Isotopes on Vacancy Formation and Antisite Defect Diffusion in Palladium and Vanadium Metals

Density functional theory calculations are performed to study the interaction between hydrogen isotopes, vacancy, and antisite defects in Pd and V. Various defect configurations and defect-defect distances are systematically explored. Binding energies and migration energy barriers are calculated and tabulated. The study provides atomistic data for subsequent mesoscale simulations of tritium, vacancy, and antisite diffusion. In Pd, a strong binding is found between a vacancy and tritium (0.16 eV). This tritium binding increases the thermal concentration of vacancies by a factor of ~10 at 500 ?C. The increase in vacancy concentration enhances V antisite diffusion in Pd by a factor of ~6 at 500 ?C. The influence of tritium is even stronger in V, with a tritium and vacancy binding energy of 0.38 eV. Such a strong binding increases the thermal concentration of vacancies by a factor of ~300 at 500 ?C. The increase in vacancy concentration enhances Pd antisite diffusion in V by a factor of ~640 at 500 ?C. Vanadium and Pd exhibit a strong driving force to intermix with a formation energy of -1.57 eV for V antisite in Pd and -1.05 eV for Pd antisite in V. The results suggest vanadium diffusion into Pd is energetically stronger than the reverse. Zero-point-energy corrections are taken into account and calculations for hydrogen and tritium are presented.

Setyawan, Wahyu↗
DOE OSTI2019

A higher order approximate static condensation method for multi-material diffusion problems

The paper studies an approximate static condensation method for the diffusion problem with discontinuous diffusion coefficients. The method allows for a general polygonal mesh which is unfitted to the material interfaces. Moreover, the interfaces can be discontinuous across the mesh edges as typical for numerical reconstructions using the volume or moment-of-fluid methods. We apply a mimetic finite difference method to solve local diffusion problems and use P 1 (mortar) edge elements to couple local problems into the global system. The condensation process and the properties of the resulting algebraic system are discussed. It is demonstrated that the method is second order accurate on smooth solutions and performs well for problems with high contrast in diffusion coefficients. Experiments also show the robustness with respect to position of the material interfaces against the underlying mesh.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Water dynamics in C–S–H and M-S-H cement pastes: A revised jump-diffusion and rotation-diffusion model

The Quasi-Elastic Neutron Scattering (QENS) spectra from four cement pastes are re-analyzed by a new revised jump-diffusion and rotation-diffusion model (rJRM). From the QENS fit, it can be seen that the rJRM is an improved model to fit QENS spectra within the whole detected neutron energy transfer and scattering vector. By the rJRM fitting, the structure parameters extracted from QENS spectra show that both the additives aluminum-silicate nanotubes (ASN) and carboxyl group functionalized ASN (ASN-COOH) can improve magnesium-silicate-hydrate (M-S-H) toward calcium-silicate-hydrate (C–S–H) direction in mechanical properties, but the improvement is weakened with decreasing temperatures. The extracted dynamical parameters show that there is a dynamic anomaly near 230 K in not only translational but also rotational diffusion of water confined in all the investigated samples. In conclusion, the anomaly in rotational diffusion is new compared with those results obtained by the QENS fit using other models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Li + Diffusion in Amorphous and Crystalline Al 2 O 3 for Battery Electrode Coatings

Al 2 O 3 is often applied protectively to lithium-ion battery anode and cathode materials to inhibit surface degradation, suppress dendrite formation, and relieve mechanical stresses. Given the very high intrinsic band gap and diffusion barrier of the material, the mechanism that allows Li diffusion through these coatings is not well understood, and widely varying laboratory results indicate that there may be dependencies on morphology and stoichiometry. Using nudged elastic band calculations and ab initio molecular dynamics, we perform a systematic investigation across Al 2 O 3 structures, both crystalline and amorphous, and at various concentrations of Li + to uncover the optimal parameters for maximally diffusive coatings. We find a correlation between the low proximity of Li + to Al 3+ and the low Li + migration barrier. Although barriers are the lowest in the highly diffusive one-dimensional channels of crystalline θ-Al 2 O 3 , the system is structurally delicate and subject to detrimental distortion as the Li + content is increased. The α-Al 2 O 3 lattice is, conversely, highly stable against distortion at all Li + concentrations but disadvantageous for Li + migration. In amorphous systems, unscreened Li + –Li + Coulomb repulsion and pre-emptive occupation of “trapping sites” combine to lower the energy barriers as a function of increasing concentration. One of our most important findings is that Al-deficient materials can sharply increase Li + movement, and we predict that an amorphous material with a combination of high Li + concentration and Al deficiency would enable highly Li + -conductive protective coatings for electrodes.

25 ENERGY STORAGE↗