Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectric relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Dielectric spectra of Apollo 15 and 16 lunar solid samples

Description of the dielectric constants, losses, and ac-conductivities of lunar samples 15065,27, 15459,62, 15555,88, 15415,57, 60015,29, 60315,34, 61016,34, and 62235,17 as measured over a range of frequencies from 100 Hz to 10 MHz and temperatures from 77 to 473 K by two-terminal capacitance substitution methods. The dielectric spectra of lunar gabbroic basalts are typified by the dielectric behavior of samples 15065 and 15555, showing complex relaxation processes which are both frequency- and temperature-dependent. Such feldspar-rich crystalline lunar basalts like samples 15459, 62235, and 60015 showed essentially the same dielectric relaxation mechanisms which are also a function of both frequency and temperature with a very broad relaxation frequency distribution. Highly-brecciated lunar sample, 60315, exhibits rather an unusual dielectric behavior which is dependent upon on field-strength.

Chung, D. H.↗
DOE OSTI2020

Dynamics of PDMS- g -PDMS Bottlebrush Polymers by Broadband Dielectric Spectroscopy

Poly(dimethylsiloxane) (PDMS)-based bottlebrush polymers, PDMS-g-PDMS, have been synthesized by anionic polymerization in combination with a condensation-based grafting reaction. Bottlebrush polymers show intriguing features, e.g., extremely low viscosities. Hereby, studies of their dynamics are rare. Therefore, we focus on the segmental relaxation by broadband dielectric spectroscopy. An increasing cross-sectional radius proportional to the increasing side chain length has been observed by small-angle neutron scattering over three samples. Here, a comparison of the segmental relaxation times of the bottlebrushes with the respective linear chains reveals slower dynamics in the former. For longer chains, this effect vanishes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamics of bottlebrush polymers

Bottlebrushes are an interesting class of polymers which shows intriguing material properties often associated with dynamics. While dynamical phenomena in linear polymers are well understood and existing theories can describe them in a good way, bottlebrush dynamics have only rarely been investigated. Therefore, we performed dielectric spectroscopy and quasi-elastic neutron scattering to study the dynamics of polydimethylsiloxane-based bottlebrush polymers, PDMS-g-PDMS focusing mostly on the segmental dynamics of the side chains. Comparing the relaxation times of the α – relaxation, tracked with dielectric spectroscopy, of bottlebrush polymers with those of their respective linear side chains show a slowing down once the side chains are attached to the backbone. This effect diminishes and finally vanishes with increasing side chain length. The time and length scale, offered by quasi-elastic neutron scattering, fits for the segmental dynamics together with faster processes. The Q -dependence of the segmental relaxation times allows to classify bottlebrush polymers as heterogenous including a non-Gaussian character. For such a dynamical system, the mean square displacement needs to be separated into single processes before an overall mean square displacement can be generated by applying the time temperature superposition principle.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Errors in radiometric remote sensing of sea-surface temperature and salinity

Techniques for remote measurement of sea-surface physical temperature and salinity using radiometric measurements from aircraft or satellite are reviewed. Studies have been conducted to determine the sensitivity of the errors in surface temperature and salinity to errors in the measured brightness temperatures using combinations of UHF, L, S, and C-band measurements. These investigations were made using values of conductivity, static dielectric constant, and relaxation time derived from the regression equations of Klein and Swift (1977). Results of the error sensitivity study are presented in the form of error contour plots which permit the calculation of errors in the estimation of the physical parameters for given errors in the raw radiometric measurements.

Britt, C. L., Jr.↗
DOE OSTI2023

Segmental relaxation of sequence defined polymers

For this work, the dynamical behavior of sequence defined polymers, P(C n EG 4 ), was studied using dielectric spectroscopy showing one segmental relaxation in addition to a secondary relaxation. In case of segmental relaxation, the relaxation times strongly depend on the molecular weight at low temperatures, while at higher temperatures, unlike to linear homo polymers, this effect levels out. With increasing length of C-units, the segmental relaxation accelerates. This is also reflected in the glass transition temperature, extracted from dielectric spectroscopy. With increasing length of C-units the glass transition temperature decreases, compatible with the accelerated segmental relaxation.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Correlation of dynamic dielectric measurements with viscosity in polymeric resin systems

Dynamic dielectric analysis has been used to study curing polymer systems and thermoplastics. Measurements have been made over a frequency range of six decades. This wide range of frequencies increases the amount of information which can be obtained. The data are analyzed in terms of the frequency dependence of the specific conductivity sigma and the relaxation time tau, parameters which are characteristic of the cure state of the material and independent of size of the sample. Dynamic dielectric measurements have been correlated with viscosity for the polysulfone thermoplastic UDEL-P1700 and with viscosity and ultrasonic measurements on the DGEBA-type epoxy Epon 828 cured with Agent U. The experimental results suggest that when ionic processes dominate the dielectric response, the intensive property sigma is a good monitor of the resin's viscosity. The results show that the dielectric relaxation time tau can be used to monitor the state of the system and the extent and rate of the reaction.

Kranbuehl, D.↗
DOE OSTI2021

The relaxation behavior of supercooled and glassy imidacloprid

Employing dielectric spectroscopy, oscillatory shear rheology, and calorimetry, the present work explores the molecular dynamics of the widely used insecticide imidacloprid above and below its glass transition temperature. In its supercooled liquid regime, the applied techniques yield good agreement regarding the characteristic structural (alpha) relaxation times of this material. In addition, the generalized Gemant–DiMarzio–Bishop model provides a good conversion between the frequency-dependent dielectric and shear mechanical responses in its viscous state, allowing for an assessment of imidacloprid’s molecular hydrodynamic radius. In order to characterize the molecular dynamics in its glassy regime, we employ several approaches. These include the application of frequency–temperature superposition (FTS) to its isostructural dielectric and rheological responses as well as use of dielectric and calorimetric physical aging and the Adam–Gibbs–Vogel model. While the latter approach and dielectric FTS provide relaxation times that are close to each other, the other methods predict notably longer times that are closer to those reflecting a complete recovery of ergodicity. In conclusion, this seemingly conflicting dissimilarity demonstrates that the molecular dynamics of glassy imidacloprid strongly depends on its thermal history, with high relevance for the use of this insecticide as an active ingredient in technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Dielectric Properties of Poly(ethylene oxide) from Molecular Dynamics Simulations

The order, conformations and dynamics of poly(oxyethylene) (POE) melts have been investigated through molecular dynamics simulations. The potential energy functions were determined from detailed ab initio electronic structure calculations of the conformational energies of the model molecules 1,2-dimethoxyethane (DME) and diethylether. The x-ray structure factor for POE from simulation will be compared to experiment. In terms of conformation, simulations reveal that chains are extended in the melt relative to isolated chains due to the presence of strong intermolecular O...H interactions, which occur at the expense of intramolecular O...H interactions. Conformational dynamics about the C-C bond were found to be significantly faster than in polymethylene, while conformational dynamics about the C-O bond even faster than the C-C dynamics. The faster local dynamics in POE relative to polymethylene is consistent with C-13 NMR spin-lattice relaxation experiments. Conformational transitions showed significant second-neighbor correlation, as was found for polymethylene. This correlation of transitions with C-C neighbors was found to be reduced relative to C-O neighbors. Dielectric relaxation from simulation will also be compared with experiment.

Smith, Grant D.↗
DOE OSTI2023

Solvation Effects on the Dielectric Constant of 1 M LiPF6 in Ethylene Carbonate: Ethyl Methyl Carbonate 3:7

We report the dielectric constant of 1 M LiPF 6 in EC:EMC 3:7 w/w (ethylene carbonate/ethyl methyl carbonate) in addition to neat EC:EMC 3:7 w/w. Using three Debye relaxations, the static permittivity value, or dielectric constant, is extrapolated to 18.5, which is compared to 18.7 for the neat solvent mixture. The EC solvent is found to strongly coordinate with the Li + cations of the salt, which results in a loss of dielectric contribution to the electrolyte. However, the small amplitude and large uncertainty in relaxation frequency for EMC cloud definitive identification of the Li + solvation shell. Importantly, the loss of the free EC permittivity contribution due to Li + solvation is almost completely balanced by the positive contribution of the associated LiPF 6 salt, demonstrating that a significant quantity of dipolar ion pairs exists in 1 M LiPF 6 in EC:EMC 3:7.

25 ENERGY STORAGE↗
DOE OSTI2023

End block dynamics in unentangled polymers by dielectric spectroscopy

Dielectric spectroscopy measures the dynamics of polymer melts over a broad frequency range. Developing a theory for the spectral shape can extend the analysis of dielectric spectra beyond determining relaxation times from the peak maxima and adds physical meaning to shape parameters determined with empirical fit functions. Toward this goal, we use the experimental results on unentangled poly(isoprene), and unentangled poly(butylene oxide), polymer melts, to test whether the concept of end blocks could be one reason for the Rouse model deviating from experimental data. These end blocks have been suggested by simulations and neutron spin echo spectroscopy and are a consequence of the monomeric friction coefficient depending on the position of the bead in the chain. The concept of an end block is an approximation which partitions the chain in a middle and two end blocks to avoid overparameterization by a continuous position dependent change of the friction parameter. Analysis of dielectric spectra shows that the deviations of the calculated from the experimental normal mode cannot be related to the end block relaxation. However, the results do not contradict an end block hiding below the segmental relaxation peak. Finally, it seems that the results are compatible with an end block being the specific part of the sub-Rouse chain interpretation close to the chain ends.

36 MATERIALS SCIENCE↗
NASA NTRS1977

An improved model for the dielectric constant of sea water at microwave frequencies

The advent of precision microwave radiometry has placed a stringent requirement on the accuracy with which the dielectric constant of sea water must be known. To this end, measurements of the dielectric constant have been conducted at S-band and L-band with a quoted uncertainty of tenths of a percent. These and earlier results are critically examined, and expressions are developed which will yield computations of brightness temperature having an error of no more than 0.3 K for an undisturbed sea at frequencies lower than X-band. At the higher microwave and millimeter wave frequencies, the accuracy is in question because of uncertainties in the relaxation time and the dielectric constant at infinite frequency.

Klein, L. A.↗
DOE OSTI2020

Dendrite Suppression by a Polymer Coating: A Coarse‐Grained Molecular Study

Abstract A major hurdle to the successful deployment of high‐energy‐density lithium metal based batteries is dendrite growth during battery cycling, which raises safety and cycle life concerns. Coating the Li metal anode with a soft polymer layer has been previously shown to be effective in suppressing dendrite growth, leading to uniform lithium deposition even at high current densities. A 3D coarse‐grained molecular model to study the mechanism of dendrite suppression is presented. It is found that the most effective coatings delay or even prevent dendrites from penetrating the polymer layer during deposition. The optimal deposition can be achieved by jointly tuning the polymer stiffness and relaxation time. Higher polymer dielectric permittivity and coating thickness are also effective, but the deposition rate and, therefore, the charging current density is reduced. These findings provide the basis for rational design of soft polymer coatings for stable lithium deposition.

Kong, Xian↗
DOE OSTI2022

Structures of glasses created by multiple kinetic arrests

X-ray scattering has been used to characterize glassy itraconazole (ITZ) prepared by cooling at different rates. Faster cooling produces ITZ glasses with lower (or zero) smectic order with more sinusoidal density modulation, larger molecular spacing, and shorter lateral correlation between the rod-like molecules. We find that each glass is characterized by not one, but two fictive temperatures T f (the temperature at which a chosen order parameter is frozen in the equilibrium liquid). The higher T f is associated with the regularity of smectic layers and lateral packing, while the lower T f with the molecular spacings between and within smectic layers. This indicates that different structural features are frozen on different timescales. The two timescales for ITZ correspond to its two relaxation modes observed by dielectric spectroscopy: the slower δ mode (end-over-end rotation) is associated with the freezing of the regularity of molecular packing and the faster α mode (rotation about the long axis) with the freezing of the spacing between molecules. Finally, our finding suggests a way to selectively control the structural features of glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Diurnal changes in the dielectric properties and water status of eastern hemlock and red spruce from Howland, ME

The diurnal characteristics of microwave dielectric properties and water potential of two conifer species were investigated in July and September, 1990. P-band and C-band radial dielectric profiles of hemlock and red spruce, as well as hemlock diurnal water potential and dielectric profiles, are presented. The resulting radial dielectric profiles matched the regions of the functional sapwood (water transport component of the active xylem) in both species such that the sapwood was characterized by a higher dielectric than the bark and heartwood tissues. This is probably due to characteristic differences in the water content of each tissue. As the hemlocks progressed through their diurnal water potential pattern, the dielectric profile remained static until mid-afternoon. As the tension in the water column relaxed (2 to 3 bars) the dielectric constant decreased by 30 to 40 percent. There are several possible explanations for this phenomenon, and these may relate to the dependency of the dielectric measurements on temperature, salinity, and volumetric water content.

Salas, W. A.↗
NASA NTRS1970

Dipole relaxation in a liquid crystal

Liquid crystal of cholesteryl chloride and myristate measured for complex dielectric constant, noting role of molecular rotation modes in dipole relaxation

Baessler, H.↗
DOE OSTI2026

Strategies for Superconducting Transmon Qubits with Millisecond T1 Relaxation Time

Enhancing coherence in superconducting transmon qubits requires suppressing dielectric loss and quasiparticle-mediated dissipation at metal–substrate, metal–vacuum, and substrate–vacuum interfaces. We recently demonstrated a five-fold enhancement of the energy relaxation time (T₁) by encapsulating Nb thin films with a low-loss passivation layer that inhibits NbOₓ formation, thereby reducing two-level system (TLS) participation at the metal surface. To extend T₁ into the millisecond regime, we are implementing a comprehensive materials- and process-level optimization strategy. This includes engineered substrate surface treatments, evaluation of alternative low-loss superconducting and dielectric material stacks, development of ultra-low-loss capping layers, and redesigns of transmon geometries to suppress electric-field participation ratio in lossy regions. Additionally, we are pioneering novel etching processes to further lower surface participation ratios. We are also exploring novel Josephson-junction materials and device layouts to enhance coherence further. We report T₁ measurements from these efforts, with the leading devices achieving relaxation times>1 ms.

Crisa, Francesco↗