SEARCH · Engineering Papers

Results for “design methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Development of a Design Methodology for Reconfigurable Flight Control Systems

A methodology is presented for the design of flight control systems that exhibit stability and performance-robustness in the presence of actuator failures. The design is based upon two elements. The first element consists of a control law that will ensure at least stability in the presence of a class of actuator failures. This law is created by inner-loop, reduced-order, linear dynamic inversion, and outer-loop compensation based upon Quantitative Feedback Theory. The second element consists of adaptive compensators obtained from simple and approximate time-domain identification of the dynamics of the 'effective vehicle' with failed actuator(s). An example involving the lateral-directional control of a fighter aircraft is employed both to introduce the proposed methodology and to demonstrate its effectiveness and limitations.

Hess, Ronald A.↗

NASA NTRS1979

HiMAT structural development design methodology

In order to improve aerodynamic performance, a twist criterion was used to design the canard and wing lifting surfaces of two graphite-epoxy research aircraft. To meet that twist criterion, the lifting surfaces were tailored using graphite-epoxy tape. The outer surface of the aircraft is essentially constructed of 95 percent graphite epoxy materials. The analytical tools and methodology used to design those lifting surfaces are described. One aircraft was subjected to an 8g ground test in order to verify structural integrity and to determine how well the desired twist was achieved. Test results are presented and the reductions of both flight and ground strain test gages and their associated stresses are discussed.

Price, M. A.↗

NASA NTRSDate not supplied

Rotating Balance Design Methodology

Several upcoming wind tunnel turbofan tests at NASA Glenn Research Center (GRC) require new rotating balances to meet test needs. As the name implies, a rotating balance rotates with the fan providing direct thrust and torque measurements to estimate fan efficiency and performance. One main feature of the new rotating balances requested by GRC, is a more compact design compatible with high bypass fans that are of interest for gains in fuel efficiency. In support of this measurement need, NASA Langley Research Center (LaRC) developed an understanding and methodology for the design of two-component rotating balances. During the development of the methodology, a thorough FEA analysis was conducted, torque analysis of laboratory test specimens, and a study of analytical models were investigated. This presentation will summarize the developed rotating balance design methodology that is detailed in a NASA Technical Memorandum. This TM will detail the analysis required to design, and fabricate a two-component spoke-type rotating balance.

Kenneth Toro↗

NASA NTRS1993

Experimental validation of optimization-based integrated controls-structures design methodology for flexible space structures

An optimization-based integrated design approach for flexible space structures is experimentally validated using three types of dissipative controllers, including static, dynamic, and LQG dissipative controllers. The nominal phase-0 of the controls structure interaction evolutional model (CEM) structure is redesigned to minimize the average control power required to maintain specified root-mean-square line-of-sight pointing error under persistent disturbances. The redesign structure, phase-1 CEM, was assembled and tested against phase-0 CEM. It is analytically and experimentally demonstrated that integrated controls-structures design is substantially superior to that obtained through the traditional sequential approach. The capability of a software design tool based on an automated design procedure in a unified environment for structural and control designs is demonstrated.

Maghami, Peiman G.↗

NASA NTRS1980

Theoretical study of network design methodologies for the aerial relay system

The aerial relay system network design problem is discussed. A generalized branch and bound based algorithm is developed which can consider a variety of optimization criteria, such as minimum passenger travel time and minimum liner and feeder operating costs. The algorithm, although efficient, is basically useful for small size networks, due to its nature of exponentially increasing computation time with the number of variables.

Rivera, J. M.↗

NASA NTRS1987

An orbiting control station for free-flying teleoperators - Preliminary design methodology

This paper summarizes work being done to develop the preliminary design of a control station for the free-flying teleoperator/telerobot ROBIN. The four-step development process involves telerobot capability definition, mission analysis, requirements generation, and design solution. The ROBIN servomanipulator requirements are listed, and a telerobotic control station requirement tree is shown.

Clarke, M. M.↗

NASA NTRS1995

Integrated Controls-Structures Design Methodology for Flexible Spacecraft

This paper proposes an approach for the design of flexible spacecraft, wherein the structural design and the control system design are performed simultaneously. The integrated design problem is posed as an optimization problem in which both the structural parameters and the control system parameters constitute the design variables, which are used to optimize a common objective function, thereby resulting in an optimal overall design. The approach is demonstrated by application to the integrated design of a geostationary platform, and to a ground-based flexible structure experiment. The numerical results obtained indicate that the integrated design approach generally yields spacecraft designs that are substantially superior to the conventional approach, wherein the structural design and control design are performed sequentially.

Maghami, P. G.↗

NASA NTRS1992

An integrated controls-structures design methodology for a flexible spacecraft

This paper proposes an approach for the design of flexible spacecraft, wherein the structural design and the control system design are performed simultaneously. The integrated design problem is posed as an optimization problem in which both the structural parameters and the control system parameters constitute the design variables, which are used to optimize a common objective function, thereby resulting in an optimal overall design. The approach is demonstrated by application to the integrated design of a geostationary platform, and to a ground-based flexible structure experiment. The numerical results obtained indicate that the integrated design approach generally yields spacecraft designs that are substantially superior compared to the conventional approach, wherein the structural design and control design are performed sequentially.

Maghami, Peiman G.↗

NASA NTRSDate not supplied

Pterodactyl: Thermal Protection System Design Methodology for a Flap Control System

As interest in non-traditional entry vehicles continues to grow, the need for a Thermal Protection System (TPS) analysis approach that can account for entry solutions with changing geometry and complicated flow dynamics becomes invaluable. The NASA Space Technology Mission Directorate (STMD) Pterodactyl project aims to accomplish this through examination of a flap controlled Adaptable, Deployable Entry Placement Technology (ADEPT)-style Deployable Entry Vehicle (DEV). This paper details an improved methodology for modeling the aerothermodynamic environment and initial TPS design for a flap control system integrated with a symmetric DEV. Improvements include i) the addition of an anchoring process that uses an increased fidelity aerodynamic solution to anchor the aerothermal environment predictions and ii) increased surface resolution, for the 1D heat transfer analysis, to isolate the hottest area on the flap that will require the thickest TPS. It was found that the anchoring process provided an improved aerothermal environment prediction. Additionally, this analysis demonstrated that there is a need for increased surface resolution in the 1D thermal analysis since the predicted location of the hottest point was significantly different than the location identified using very coarse surface resolution.

Zane B Hays↗

NASA NTRS1991

Application of modern control design methodology to oblique wing research aircraft

A Linear Quadratic Regulator synthesis technique was used to design an explicit model following control system for the Oblique Wing Research Aircraft (OWRA). The forward path model (Maneuver Command Generator) was designed to incorporate the desired flying qualities and response decoupling. The LQR synthesis was based on the use of generalized controls, and it was structured to provide a proportional/integral error regulator with feedforward compensation. An unexpected consequence of this design approach was the ability to decouple the control synthesis into separate longitudinal and lateral directional designs. Longitudinal and lateral directional control laws were generated for each of the nine design flight conditions, and gain scheduling requirements were addressed. A fully coupled 6 degree of freedom open loop model of the OWRA along with the longitudinal and lateral directional control laws was used to assess the closed loop performance of the design. Evaluations were performed for each of the nine design flight conditions.

Vincent, James H.↗

NASA NTRS1993

An optimization-based integrated controls-structures design methodology for flexible space structures

An approach for an optimization-based integrated controls-structures design is presented for a class of flexible spacecraft that require fine attitude pointing and vibration suppression. The integrated design problem is posed in the form of simultaneous optimization of both structural and control design variables. The approach is demonstrated by application to the integrated design of a generic space platform and to a model of a ground-based flexible structure. The numerical results obtained indicate that the integrated design approach can yield spacecraft designs that have substantially superior performance over a conventional design wherein the structural and control designs are performed sequentially. For example, a 40-percent reduction in the pointing error is observed along with a slight reduction in mass, or an almost twofold increase in the controlled performance is indicated with more than a 5-percent reduction in the overall mass of the spacecraft (a reduction of hundreds of kilograms).

Maghami, Peiman G.↗

NASA NTRS2019

A Design Methodology for Optimizing and Integrating Composite Materials in Gear Structures

The application of composite materials to gear structures is complex because of the gear shape, the need for precise dimensional tolerances, and the complex dynamic load condition. Methods are presented in this work to design and optimize an integrated composite hub-web structure that can be used as part of a hybrid composite-steel gear. The composite hub-web structure is a planar structure with a large decrease in thickness from the hub to the rim. Methods for design and optimization of this variable-thickness structure are presented along with a method for forming braided prepreg material to conform to the shape of this structure. A layered approach is presented that integrates cut plies or filler materials for thickness buildup with continuous-fiber layers for the primary load path. An additional gear design concept is presented that has an axially extended continuous-fiber composite structure that can be combined with the planar structure. A proposed optimization methodology is introduced where an optimized design is output for each type of optimization simulation. Through this process, composite knowledge can be incorporated in the optimization, and more control is given over the design during the process. The methods in this study provide a tool for designing and optimizing composite structures for gears and other high-power-density applications.

optimization↗

NASA NTRS1986

Solid lubrication design methodology, phase 2

The high temperature performance of solid lubricated rolling elements was conducted with a specially designed traction (friction) test apparatus. Graphite lubricants containing three additives (silver, phosphate glass, and zinc orthophosphate) were evaluated from room temperature to 540 C. Two hard coats were also evaluated. The evaluation of these lubricants, using a burnishing method of application, shows a reasonable transfer of lubricant and wear protection for short duration testing except in the 200 C temperature range. The graphite lubricants containing silver and zinc orthophosphate additives were more effective than the phosphate glass material over the test conditions examined. Traction coefficients ranged from a low of 0.07 to a high of 0.6. By curve fitting the traction data, empirical equations for slope and maximum traction coefficient as a function of contact pressure (P), rolling speed (U), and temperature (T) can be developed for each lubricant. A solid lubricant traction model was incorporated into an advanced bearing analysis code (SHABERTH). For comparison purposes, preliminary heat generation calculations were made for both oil and solid lubricated bearing operation. A preliminary analysis indicated a significantly higher heat generation for a solid lubricated ball bearing in a deep groove configuration. An analysis of a cylindrical roller bearing configuration showed a potential for a low friction solid lubricated bearing.

Pallini, R. A.↗

NASA NTRS2000

Structural Design Methodology Based on Concepts of Uncertainty

In this report, an approach to damage-tolerant aircraft structural design is proposed based on the concept of an equivalent "Level of Safety" that incorporates past service experience in the design of new structures. The discrete "Level of Safety" for a single inspection event is defined as the compliment of the probability that a single flaw size larger than the critical flaw size for residual strength of the structure exists, and that the flaw will not be detected. The cumulative "Level of Safety" for the entire structure is the product of the discrete "Level of Safety" values for each flaw of each damage type present at each location in the structure. Based on the definition of "Level of Safety", a design procedure was identified and demonstrated on a composite sandwich panel for various damage types, with results showing the sensitivity of the structural sizing parameters to the relative safety of the design. The "Level of Safety" approach has broad potential application to damage-tolerant aircraft structural design with uncertainty.

Lin, K. Y.↗

NASA NTRS1983

Three-dimensional viscous design methodology for advanced technology aircraft supersonic inlet systems

A broad program to develop advanced, reliable, and user oriented three-dimensional viscous design techniques for supersonic inlet systems, and encourage their transfer into the general user community is discussed. Features of the program include: (1) develop effective methods of computing three-dimensional flows within a zonal modeling methodology; (2) ensure reasonable agreement between said analysis and selective sets of benchmark validation data; (3) develop user orientation into said analysis; and (4) explore and develop advanced numerical methodology.

Anderson, B. H.↗

NASA NTRS1984

Three-dimensional viscous design methodology for advanced technology aircraft supersonic inlet systems

Anderson, B. H.↗

NASA NTRS2000

Aero-Mechanical Design Methodology for Subsonic Civil Transport High-Lift Systems

In today's highly competitive and economically driven commercial aviation market, the trend is to make aircraft systems simpler and to shorten their design cycle which reduces recurring, non-recurring and operating costs. One such system is the high-lift system. A methodology has been developed which merges aerodynamic data with kinematic analysis of the trailing-edge flap mechanism with minimum mechanism definition required. This methodology provides quick and accurate aerodynamic performance prediction for a given flap deployment mechanism early on in the high-lift system preliminary design stage. Sample analysis results for four different deployment mechanisms are presented as well as descriptions of the aerodynamic and mechanism data required for evaluation. Extensions to interactive design capabilities are also discussed.

vanDam, C. P.↗

NASA NTRS1999

Experimental Studies of the Heat Transfer to RBCC Rocket Nozzles for CFD Application to Design Methodologies

Rocket thrusters for Rocket Based Combined Cycle (RBCC) engines typically operate with hydrogen/oxygen propellants in a very compact space. Packaging considerations lead to designs with either axisymmetric or two-dimensional throat sections. Nozzles tend to be either two- or three-dimensional. Heat transfer characteristics, particularly in the throat, where the peak heat flux occurs, are not well understood. Heat transfer predictions for these small thrusters have been made with one-dimensional analysis such as the Bartz equation or scaling of test data from much larger thrusters. The current work addresses this issue with an experimental program that examines the heat transfer characteristics of a gaseous oxygen (GO2)/gaseous hydrogen (GH2) two-dimensional compact rocket thruster. The experiments involved measuring the axial wall temperature profile in the nozzle region of a water-cooled gaseous oxygen/gaseous hydrogen rocket thruster at a pressure of 3.45 MPa. The wall temperature measurements in the thruster nozzle in concert with Bartz's correlation are utilized in a one-dimensional model to obtain axial profiles of nozzle wall heat flux.

Santoro, Robert J.↗