Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “descriptors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Role of man in flight experiment payloads, phase 1

The identification of required data for studies of Spacelab experiment functional allocation, the development of an approach to collecting these data from the payload community, and the specification of analytical methods necessary to quantitatively determine the role of man in specific Spacelab experiments are presented. A generalized Spacelab experiment operation sequence was developed, and the parameters necessary to describe each signle function in the sequence were identified. A set of functional descriptor worksheets were also drawn up. The methodological approach to defining the role of man was defined as a series of trade studies using a digial simulation technique. The tradeoff variables identified include scientific crew size, skill mix, and location. An existing digital simulation program suitable for the required analyses was identified and obtained.

Malone, T. B.↗
NASA NTRS1974

Development and application of ride-quality criteria

Ride quality vibration criteria applicable to the design and evaluation of air and surface transportation systems are described. Consideration is given to the magnitude of vehicle vibration experienced by the passenger, the frequency of vibration, the direction of vibration measurements are presented for a variety of air and surface transportation systems. In addition, simulator data on seat dynamics and passenger response are presented. Results suggest the relative merits of various physical descriptors and measurement locations for characterizing the vibration in terms suitable for the design and/or evaluation of transportation systems.

Stephens, D. G.↗
NASA NTRS1974

Summary of recent investigations of inlet flow distortion effects on engine stability

A review is presented of recent experimental results, analytical procedures and test techniques employed to evaluate the effects of inlet flow distortion on the stability characteristics of representative afterburning turbofan and turbojet compression systems. Circumferential distortions of pressure and temperature, separately and in combination, are considered. Resulting engine sensitivity measurements are compared with predictions based on simplified parallel compressor models and with several distortion descriptor parameters.

Graber, E. J., Jr.↗
NASA NTRS1975

Spacelab user implementation assessment study. Volume 1: Concept development and evaluation

The total matrix of alternate Spacelab processing concepts and the rejection rationale utilized to reduce the matrix of 243 alternates to the final candidate processing concepts are developed. The work breakdown structure used for the systematic estimation and compilation of integration and checkout resources is presented along with descriptors of each element. Program models are provided of the space transportation system, the Spacelab, the orbiter, and the ATL that were used as the basis for the study trades, analyses, and optimizations. Resource requirements for all processing concepts are summarized along with the optimizations of the processing concepts. Concept evaluations including flight-rate sensitivities of the GSE, facilities, Spacelab hardware elements, and personnel are delineated. An analysis is presented of the applicability of the candidate concepts to potential spacelab users. The impact of the use of the western test range as an orbiter/spacelab launch site on the candidate processing concepts is evaluated. An assessment of the geographical co-location of experiment, Spacelab, and orbiter-cargo integration is included. Ownership options of the support module/system igloo are discussed.

Source record↗
NASA NTRS1975

Use of information-retrieval languages in automated retrieval of experimental data from long-term storage

Problems and methods are discussed of automating information retrieval operations in a data bank used for long term storage and retrieval of data from scientific experiments. Existing information retrieval languages are analyzed along with those being developed. The results of studies discussing the application of the descriptive 'Kristall' language used in the 'ASIOR' automated information retrieval system are presented. The development and use of a specialized language of the classification-descriptive type, using universal decimal classification indices as the main descriptors, is described.

Khovanskiy, Y. D.↗
NASA NTRS1974

Climatological studies of the earth's radiation budget and its variability with measurements of the satellite Nimbus 3

Measurements of emitted long-wave radiation and reflected solar radiation were obtained over the entire globe from the meteorological satellite Nimbus III during 10 semimonthly periods of 1969 and 1970 covering a full annual cycle. Analyses of these measurements resulted in values for various scales for the radiation balance, the planetary albedo, and the outgoing long-wave radiation flux, and in geographical distributions of their averages and parameters describing their variability. Some examples obtained from measurements during the semimonthly period from 1-15 July 1969 are presented. They show the value of quantitative radiometric measurements as climatological descriptors as well as for studies of atmospheric energetics.

Raschke, E.↗
NASA NTRS1974

Skylab 4 photographic index and scene identification

A quick reference guide to the photographic imagery obtained on Skylab 4 is presented. Place names and descriptors used give sufficient information to identify frames for discussion purposes and are not intended to be used for ground nadir or geographic coverage purposes.

Underwood, R. W.↗
NASA NTRS1974

Development and application of ride-quality criteria

A program for the development of ride-quality vibration criteria applicable to the design and evaluation of air and surface transportation systems is described. Consideration is given to the magnitude of vehicle vibration experienced by the passenger, the frequency of vibration, the direction of vibration, and the influence of seat dynamics on passenger response. Comparative vibration measurements are presented for a variety of air and surface transportation systems. In addition, simulator data on seat dynamics and passenger response are presented. Results suggest the relative merits of various physical descriptors and measurement locations for characterizing the vibration in terms suitable for the design and/or evaluation of transportation systems.

Stephens, D. G.↗
NASA NTRS1976

A computer program for the determination of the acoustic pressure signature of helicopter rotors due to blade thickness

A computer program is presented for the determination of the thickness noise of helicopter rotors. The results were obtained in the form of an acoutic pressure time history. The parameters of the program are the rotor geometry and the helicopter motion descriptors, and the formulation employed is valid in the near and far fields. The blade planform must be rectangular, but the helicopter motion is arbitrary; the observer position is fixed with respect to the ground with a maximum elevation of 45 deg above or below the rotor plane. With these restrictions, the program can also be used for the calculation of thickness noise of propellers.

Mall, G. H.↗
NASA NTRS1976

A handbook for the estimation of airside delays at major airports (quick approximation method)

The handbook contains a set of curves that allow estimation of the average number of total daily delay minutes at a major airport under a variety of conditions. Demand profiles at each airport are classified with respect to the number of daily peak periods, the percentage of daily flights during peak periods, and the number of peak period operations at the airport. When combined with the saturation capacity of the airport, these descriptors provide sufficient information to allow usage of the handbook. Examples illustrating the use of the handbook are provided, as well as a brief review and description of the technical approach and of the computer package developed for this purpose.

Odoni, A. R.↗
NASA NTRS1976

Analysis of the effect of numbers of aircraft operations on community annoyance

The general validity of the equivalent-energy concept as applied to community annoyance to aircraft noise has been recently questioned by investigators using a peak-dBA concept. Using data previously gathered around nine U.S. airports, empirical tests of both concepts are presented. Results show that annoyance response follows neither concept, that annoyance increases steadily with energy-mean level for constant daily operations and with numbers of operations up to 100-199 per day (then decreases for higher numbers), and that the behavior of certain response descriptors is dependent upon the statistical distributions of numbers and levels.

Connor, W. K.↗
NASA NTRS1978

Arecibo radar observations of Martian surface characteristics near the equator

Mars radar observations at 12.6-cm wavelength indicate that many of what were potential Viking landing sites along the planet's equator are rougher than interpretations of Mariner 9 images suggested. Root mean square surface slopes are typically 5 degrees in the region bounded by 160 and 200 degrees W, 0 and 12 degrees S. From Tharsis Montes west to 160 degrees W, radar-scattering characteristics suggest extreme roughness on small scales, perhaps exceeding 10 degrees in rms magnitude. East of Tharsis and north of Valles Marineris the surface is smooth, with values of rms slope as low as 1 degree; the elevation of this plateau was too high for a Viking landing. Study of spectral shapes indicates the Hagfors scattering law remains the best descriptor of quasi-specular surface scattering properties in an average sense; widespread variations in the surface argue against its indiscriminate use, however. Backscattering at moderate (25-40 degrees) incidence angles was studied qualitatively and was found to be significantly above the level predicted by a strictly quasi-specular (e.g., Hagfors) process; it also is variable over the surface.

Simpson, R. A.↗
NASA NTRS1977

Objective tropical cyclone analysis and forecasting technique using conventional and Nimbus-5 electrically scanning microwave radiometer measurements

The ADAPT empirical analysis programs, based on finding an optimal representation of the data in the Karhunen-Loeve sense, were applied to 120 observations of twenty-nine 1973 and 1974 Pacific tropical cyclones. Each observation consists of NIMBUS-5 electrically scanning microwave radiometer (ESMR) radiation measurements at 267 grid points covering and surrounding the tropical cyclone plus nine other non-satellite derived descriptors. Analysis and forecast algorithms to estimate storm motion and intensity were developed for times ranging from the observation time up to 72 hours later. The 24 hr wind speed forecasts with an accuracy of 11.7 knots and position forecasts with accuracies 15% better than persistence were demonstrated using independent tests.

Hunter, H. E.↗
NASA NTRS1980

Full-coverage film cooling on flat, isothermal surfaces: Data and predictions

The heat transfer and fluid mechanics characteristics of full-coverage film cooling were investigated. The results for flat, isothermal plates for three injection geometries (normal, slant, and compound angle) are summarized and data concerning the spanwise distribution of the heat transfer coefficient within the blowing region are presented. Data are also presented for two different numbers of rows of holes (6 and 11). The experimental results summarized can be predicted with a two dimensional boundary layer code, STANCOOL, by providing descriptors of the injection parameters as inputs.

Crawford, M. E.↗
NASA NTRS1979

The crop assessment subsystem: System implementation and approaches used for the generation of crop production reports

The primary responsibility of the crop assessment subsystem (CAS) during the three phases of LACIE was to produce crop reports that included estimates of wheat area, yield, and production, as well as a specified set of associated statistical descriptors. The operations of CAS are described with emphasis on sampling strategy, input/output data, evolution of aggregation/reporting system capabilities, and CAS aggregation procedures.

Mcallum, W. E.↗
NASA NTRS1980

Electric propulsion for near-Earth space missions

A set of missions was postulated that was considered to be representative of those likely to be desirable/feasible over the next three decades. The characteristics of these missions, and their payloads, that most impact the choice/design of the requisite propulsion system were determined. A system-level model of the near-Earth transportation process was constructed, which incorporated these mission/system characteristics, as well as the fundamental parameters describing the technology/performance of an ion bombardment based electric propulsion system. The model was used for sensitivity studies to determine the interactions between the technology descriptors and program costs, and to establish the most cost-effective directions for technology advancement. The most important factor was seen to be the costs associated with the duration of the mission, and this in turn makes the development of advanced electric propulsion systems having moderate to high efficiencies ( 50 percent) at intermediate ranges of specific impulse (approximately 1000 seconds) very desirable.

Terwilliger, C. H.↗
NASA NTRS1981

Characteristics of flight simulator visual systems

The physical parameters of the flight simulator visual system that characterize the system and determine its fidelity are identified and defined. The characteristics of visual simulation systems are discussed in terms of the basic categories of spatial, energy, and temporal properties corresponding to the three fundamental quantities of length, mass, and time. Each of these parameters are further addressed in relation to its effect, its appropriate units or descriptors, methods of measurement, and its use or importance to image quality.

Statler, I. C.↗