Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density functional calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Band-gap corrected density functional theory calculations for InAs/GaSb type II superlattices

We performed pseudopotential based density functional theory (DFT) calculations for GaSb/InAs type II superlattices (T2SLs), with bandgap errors from the local density approximation mitigated by applying an empirical method to correct the bulk bandgaps. Specifically, this work (1) compared the calculated bandgaps with experimental data and non-self-consistent atomistic methods; (2) calculated the T2SL band structures with varying structural parameters; (3) investigated the interfacial effects associated with the no-common-atom heterostructure; and (4) studied the strain effect due to lattice mismatch between the two components. This work demonstrates the feasibility of applying the DFT method to more exotic heterostructures and defect problems related to this material system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Understanding PGM-free Catalysts by Linking Density Functional Theory Calculations and Structural Analysis: Perspectives and Challenges

Here, we discuss perspectives and challenges in applying density functional theory for the calculation of spectroscopic properties of platinum group metal (PGM)-free electrocatalysts for oxygen reduction. More specifically, we discuss recent advances in the density functional theory calculations of core-level shifts in binding energies of N 1s electrons as measured by X-ray photoelectron spectroscopy. The link between the density functional theory calculations, the electrocatalytic performance of the catalysts, and structural analysis using modern spectroscopic techniques is expected to significantly increase our understanding of PGM-free catalysts at the molecular level.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Shrinking Self-Interaction Errors with the Fermi–Löwdin Orbital Self-Interaction-Corrected Density Functional Approximation

The self-interaction error (SIE) is one of the major drawbacks of practical exchange-correlation functionals for Kohn-Sham density functional theory. Despite this, the use of methods that explicitly remove SIE from approximate density functionals is scarce in the literature due to their relatively high computational cost and lack of consistent improvement over standard modern functionals. Here, we assess the performance of a novel approach recently proposed by Pederson, Ruzsinszky, and Perdew for performing self-interaction free calculations in density functional theory based on Fermi-orbitals. To this end, we employ test sets consisting of reaction energies that are considered particularly sensitive to SIE. We found that the parameter-free Fermi-Löwdin orbital self-interaction correction method combined with standard local spin density approximation (LSDA) and Perdew-Burke-Ernzerhof (PBE) functionals gives a much better estimate of reaction energies compared to their parent LSDA and PBE functionals for most of the reactions in these two sets. They also perform on par with the global PBE0 and range-separated LC-ωPBE hybrids, which partially eliminate the SIE by including Hartree-Fock exchange. This shows the potential of the Fermi-Löwdin orbital self-interaction corrected (FLOSIC) method for practical density functional calculations without SIE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Symmetry-correct bonding in density functional theory calculations for delta phase Pu

The long-held conclusion that magnetic order in delta phase Pu makes the structure mechanically unstable in density functional theory calculations is incorrect if the magnetic order is allowed to be non-collinear. The non-collinear 3Q spin structure is intrinsically cubic and makes all structurally equivalent bonds equivalent in their bonding character. Applied to density functional theory calculations on delta phase Pu, the 3Q spin structure results in elastic constants and phonons with the correct symmetry. Finally, the calculated phonon dispersion agrees better with experiment than previous calculations, and the calculated thermal expansion shows the unique behavior seen experimentally: it is negative.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Defining the contributions of permanent electrostatics, Pauli repulsion, and dispersion in density functional theory calculations of intermolecular interaction energies

In energy decomposition analysis of Kohn-Sham density functional theory calculations, the so-called frozen (or pre-polarization) interaction energy contains contributions from permanent electrostatics, dispersion, and Pauli repulsion. The standard classical approach to separate them suffers from several well-known limitations. We introduce an alternative scheme that employs valid antisymmetric electronic wavefunctions throughout and is based on the identification of individual fragment contributions to the initial supersystem wavefunction as determined by an energetic optimality criterion. The density deformations identified with individual fragments upon formation of the initial supersystem wavefunction are analyzed along with the distance dependence of the new and classical terms for test cases that include the neon dimer, ammonia borane, water-Na{sup +}, water-Cl{sup −}, and the naphthalene dimer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Challenges for density functional theory: calculation of CO adsorption on electrocatalytically relevant metals

Density Functional Theory (DFT) is currently the most tractable choice of theoretical model used to understand the mechanistic pathways for electrocatalytic processes such as CO 2 or CO reduction. In this work, we assess the performance of two DFT functionals designed specifically to describe surface interactions, RTPSS and RPBE, as well as two popular meta-GGA functionals, SCAN and B97M-rV, that have not been a priori optimized for better interfacial properties. We assess all four functionals against available experimental data for prediction of bulk and bare surface properties on four electrocatalytically relevant metals, Au, Ag, Cu, and Pt, and for binding CO to surfaces of these metals. To partially mitigate issues such as thermal and anharmonic corrections associated with comparing computations with experiments, molecular benchmarks against high level quantum chemistry are reported for CO complexes with Au, Ag, Cu and Pt atoms, as well as the CO–water complex and the water dimer. Overall, we find that the surface modified RPBE functional performs reliably for many of the benchmarks examined here, and the meta-GGA functionals also show promising results. Specifically B97M-rV predicts the correct site preference for CO binding on Ag and Au (the only functional tested here to do so), while RTPSS performs well for surface relaxations and binding of CO on Pt and Cu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural Stability of Graphene-Supported Pt Layers: Diffusion Monte Carlo and Density Functional Theory Calculations

In this study, we used a combination of diffusion Monte Carlo and density functional theory calculations to investigate the stability and interlayer binding of various layered structures of Pt atoms adsorbed on graphene. Our findings show that vertically buckled Pt monolayer and bilayer with (111)-packing order are more energetically favorable than the corresponding buckled (100) or flat (100)-packing structures. This can be attributed to the significant lattice mismatch (>10%) between pristine graphene and a free-standing (100)-packing Pt layer. Additionally, our calculations reveal that among the (100)-packing Pt layers, an incommensurate structure with a Pt/C atomic ratio less than 1/2 may be more stable than the commensurate structures registered at the bridge sites, which aligns with recent experimental findings of incommensurate (100)-packing Pt layers on graphene. The interlayer binding between the Pt layer and graphene is found to be primarily driven by van der Waals interaction, except for the AA-stacked buckled-(100) Pt bilayer where the bottom Pt atoms show chemisorption to the graphene surface. In conclusion, this research offers a comprehensive examination of the stability and interlayer binding of metallic Pt layers, providing valuable insights for potential applications as a next-generation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

An Algorithm for Atom-Centered Lossy Compression of the Atomic Orbital Basis in Density Functional Theory Calculations

Large atomic-orbital (AO) basis sets of at least triple and preferably quadruple-ζ (QZ) size are required to adequately converge Kohn–Sham density functional theory (DFT) calculations toward the complete basis set limit. However, incrementing the cardinal number by one nearly doubles the AO basis dimension, and the computational cost scales as the cube of the AO dimension, so this is very computationally demanding. Here, in this work, we develop and test a threshold-based natural atomic orbital (NAO) scheme in which ϵ-NAOs are obtained as eigenfunctions of atomic blocks of the density matrix in a one-center orthogonalized representation. This enables compression of the AO basis that is optimal for a given threshold, 10 –ϵ , by discarding NAOs with occupation numbers below that threshold. Extensive pilot test calculations using the Hartree–Fock functional and taking the converged density matrix as input suggest that a threshold of 10 –5 can yield a compression factor (ratio of AO to compressed ϵ-NAO dimension) between 2.5 and 4.5 for the QZ pc-3 basis. The errors in relative energies are typically less than 0.1 kcal/mol when the compressed basis is used instead of the uncompressed basis. Between 10 and 100 times smaller errors (i.e., usually less than 0.01 kcal/mol) can be obtained with a threshold 10 –7 , while the compression factor is typically between 2 and 2.5.

basis sets↗
NASA NTRS2002

Electronic Absorption Spectra of Neutral Perylene (C20H12), Terrylene (C30H16), and Quaterrylene (C40H20) and their Positive and Negative Ions: Ne Matrix-Isolation Spectroscopy and Time Dependent Density Functional Theory Calculations

We present a full experimental and theoretical study of an interesting series of polycyclic aromatic hydrocarbons, the oligorylenes. The absorption spectra of perylene, terrylene and quaterrylene in neutral, cationic and anionic charge states are obtained by matrix-isolation spectroscopy in Ne. The experimental spectra are dominated by a bright state that red shifts with growing molecular size. Excitation energies and state symmetry assignments are supported by calculations using time dependent density functional theory methods. These calculations also provide new insight into the observed trends in oscillator strength and excitation energy for the bright states: the oscillator strength per unit mass of carbon increases along the series.

Halasinski, Thomas M.↗
DOE OSTI2015

Ab initio quasi-particle approximation bandgaps of silicon nanowires calculated at density functional theory/local density approximation computational effort

Ab initio calculations of hydrogen-passivated Si nanowires were performed using density functional theory within LDA-1/2, to account for the excited states properties. A range of diameters was calculated to draw conclusions about the ability of the method to correctly describe the main trends of bandgap, quantum confinement, and self-energy corrections versus the diameter of the nanowire. Bandgaps are predicted with excellent accuracy if compared with other theoretical results like GW, and with the experiment as well, but with a low computational cost.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Integrating Density Functional Theory Calculations with Vibrational and Nuclear Magnetic Resonance Spectroscopy

This review focuses on the complementary nature of density functional theory calculations and spectroscopic studies related to cellulose and its interactions within plant cell walls (PCWs). The complexity, structural disorder, and nanoscale nature of PCWs make them difficult to analyze and understand, but advances in sum-frequency generation and nuclear magnetic resonance spectroscopies as well as in density functional theory have made it possible to elucidate structure not observable previously. Combined with other techniques such as wide-angle X-ray scattering and neutron diffraction, details of PCW components (e.g., cellulose, lignin, pectin) and their interactions with one another can be elucidated. Furthermore, these techniques provide new insight into biological and biochemical studies and provide a basis for creating improved models of the PCWs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Density functional theory calculations of the thermodynamic and kinetic properties of point defects in β -U

Density functional theory (DFT) calculations of the thermodynamic and kinetic properties of point defects in the β phase of uranium are reported. Defect energies and entropies were calculated using 2 x 2 x 2 supercells and the Generalized Gradient Approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) for the exchange-correlation potential. Due to computational cost, calculations of the vibrational properties governing entropies were performed by only displacing atoms within (roughly) the 3rd or 4th nearest neighbor shell of the defect, which implicitly assumes that atoms beyond this distance are unaffected by the defect. Migration barriers were estimated by nudged elastic band (NEB) calculations. The low symmetry of the β-U phase (the unit cell is tetragonal and contains 30 atoms) results in many point defect configurations and even more migration pathways. A connectivity map, starting from the most stable point defects, was developed in order to identify the rate-limiting step controlling the net diffusion rate in each crystallographic direction. The uranium self-diffusivity tensor was calculated by combining the defect formation energies, entropies, migration barriers and attempt frequencies. The fastest diffusion rate was determined to be a vacancy mechanism in the z crystallographic direction. The predicted uranium self-diffusivity for this mechanism agrees well with available experimental data. Finally, the diffusion mechanisms and rates identified in this study will inform fuel performance models of swelling and gas evolution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Density functional theory calculations of magnetocrystalline anisotropy energies for (Fe 1-x Co x ) 2 B

We present and discuss density functional theory calculations of magnetic properties of the family of ferromagnetic compounds, (Fe 1-x Co x ) 2 B, focusing specifically on the magnetocrystalline anisotropy energy (MAE). Using periodic supercells of various sizes (up to 96 atoms), it is shown that the general qualitative features of the composition dependence of the MAE is in agreement with experimental findings, while our predicted magnitudes are larger than those of experiment. We find that the use of small supercells (6 and 12-atom) favors larger MAE values relative to a statistical sample of configurations constructed with 96-atom supercells. As a result, the effect of lattice relaxations is shown to be small. Calculations of the Curie temperature for this alloy are also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Orbitals from local RDMFT: Are they Kohn-Sham or natural orbitals?

Recently, an approximate theoretical framework was introduced, called local reduced density matrix functional theory (local-RDMFT), where functionals of the one-body reduced density matrix (1-RDM) are minimized under the additional condition that the optimal orbitals satisfy a single electron Schrödinger equation with a local potential. In the present work, we focus on the character of these optimal orbitals. In particular, we compare orbitals obtained by local-RDMFT with those obtained with the full minimization (without the extra condition) by contrasting them against the exact NOs and orbitals from a density functional calculation using the local density approximation (LDA). We find that the orbitals from local-RMDFT are very close to LDA orbitals, contrary to those of the full minimization that resemble the exact NOs. Since local RDMFT preserves the good quality of the description of strong static correlation, this finding opens the way to a mixed density/density matrix scheme, where Kohn-Sham orbitals obtain fractional occupations from a minimization of the occupation numbers using 1-RDM functionals. This will allow for a description of strong correlation at a cost only minimally higher than a density functional calculation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Analysis and visualization of energy densities. II. Insights from linear-response time-dependent density functional theory calculations

Inspired by the analysis of Kohn–Sham energy densities by Nakai and coworkers, we extended the energy density analysis to linear-response time-dependent density functional theory (LR-TDDFT) calculations. Using ethylene–tetrafluoroethylene and oxyluciferin–water complexes as examples, distinctive distribution patterns were demonstrated for the excitation energy densities of local excitations (within a molecular fragment) and charge-transfer excitations (between molecular fragments). It also provided a simple way to compute the effective energy of both hot carriers (particle and hole) from charge-transfer excitations via an integration of the excitation energy density over the donor and acceptor grid points.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Polaron-induced metal-to-insulator transition in vanadium oxides from density functional theory calculations

Vanadium oxides have been extensively studied as phase-change memory units in artificial synapses for neuromorphic computing due to their metal-insulator transitions (MIT) at or near room temperature. Recently, injection of charge carriers into vanadium oxides, e.g., via optically via a heterostructure, has been proposed as an alternative switching mechanism and also potentially as a means to tune the MIT temperature. In this study, we explore the formation of small polarons in the low temperature (LT) insulating phases for V 3 O 5 ,VO 2 , and V 2 O 3 , and the barriers to their migration using density functional theory calculations. We find that V 3 O 5 exhibits very low hole and electron polaron migration barriers (<100 meV) compared to V 2 O 3 and VO 2 , leading to much higher estimated polaronic conductivity. We also link the relative migration barriers to the amount of distortion that has to travel when the polaron migrate from one site to another. Polarons in V 3 O 5 also have smaller binding energies to vanadium and oxygen vacancy defects. Furthermore, these results suggest that the triggering of the MIT via injection of charge carriers are due to the formation of small polarons that can migrate rapidly through the crystal.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Towards quantifying the role of exact exchange in the prediction hydrogen bond spin-spin coupling constants involving fluorine

The effect of a fraction of Hartree-Fock exchange on the calculated spin-spin coupling constants involving fluorine through a hydrogen bond is analyzed in detail. Coupling constants calculated using wavefunction methods are revisited in order to get high-level calculations using the same basis set. Accurate MCSCF results are obtained using an additive approach. These constants and their contributions are used as a reference for density functional calculations. Within the density functional theory, the Hartree-Fock exchange functional is split in short- and long-range using a modified version of the Coulomb-attenuating method with the SLYP functional as well as with the original B3LYP. Results support the difficulties for calculating hydrogen bond coupling constants using density functional methods when fluorine nuclei are involved. Coupling constants are very sensitive to the Hartree-Fock exchange and it seems that, contrary to other properties, it is important to include this exchange for short-range interactions. Best functionals are tested in two different groups of complexes: those related with anionic clusters of type [F(HF){sub n}]{sup −} and those formed by difluoroacetylene and either one or two hydrogen fluoride molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗