Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystalline”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Enhanced crystallinity of low temperature deposited silicon films on graphite subtrates

The previously developed technique of a sandwich coating for silicon crystallinity enhancement in silicon films deposited at low temperature is applied to graphite substrates. The measured increase in silicon crystallinity is comparable to that observed earlier using a quartz substrate. The distribution of aluminum in the silicon films is determined using Auger spectroscopic depth profiling. Carbon diffusion from the substrate into the silicon film is shown to be negligible at a substrate temperature of 600 C.

Chang, C. A.↗

Chemical composition of crystalline rock fragments from Luna 16 and Luna 20 fines

The chemical composition (bulk, rare earth, and trace elements) of the Luna 16 mare regolith and luna 20 highland regolith is discussed. The rock samples considered are 14 basaltic rock fragments (Luna 16) and 13 rock fragments of the ANT suite (Luna 20). On the basis of bulk composition, two types of basaltic rocks have been differentiated and defined in the Luna 16 regolith: mare basalts (fundamental crystalline rocks of Mare Fecunditatis) and high-alumina basalts. The bulk analyses of rock fragments of the ANT suite also enabled distinction of two rock types: anorthositic norites and troctolites and/or spinal-troctolites (the most abundant crystalline rocks of the highland region, the landing site of luna 20), and anorthosites. The chemical compositions of Luna 16 and Luna 20 regolith samples are compared. Differences in the chemistry of the Luna 16 mare regolith and that of mare basalts are discussed. The chemical affinity between the Luna 20 highland regolith and (a) anorthositic norites and (b) troctolites and/or spinel-troctolites has been ascertained.

Cimbalnikova, A.↗

Hydrogen diffusion and electronic structure in crystalline and amorphous Ti/sub y/CuH/sub x/

Hydrogen diffusion behavior and electronic properties of crystalline TiCuHo94, Ti2CuH1.90, and Ti2CuH2.63 and amorphous a-TiCuH1.4 were studied using proton relaxation times, proton Knight shifts, and magnetic susceptibilities. Crystal structure and hydrogen site occupancy have major roles in hydrogen mobility. The density of electron states at E sub F is reduced in amorphous a-TiCuH1.4 compared to the crystalline hydrides.

Bowman, R. C., Jr.↗

NMR studies of electronic structure in crystalline and amorphous Zr2PdH/x/

The proton Knight shifts and spin-lattice relaxation times have been measured in crystalline and amorphous Ze2PdH(x). Core polarization from the Zr d-band dominates the proton hyperfine interactions. The density of Fermi level d-electron states is reduced in the amorphous phase relative to the electron density in crystalline Zr2PdH(x).

Bowman, R. C., Jr.↗

Solar system ice - Amorphous or crystalline?

The meteoritic bombardment of icy surfaces is discussed, focusing on the formation of amorphous ice and its thermal, mechanical, and optical properties. A numerical code has been developed for evaluating the ratio of the volume of the melted and vaporized ice target to the volume of the projectile that has impacted the surface and left a crater. However, water will only vaporize with impact speeds over 4 to 6 km/sec, and subsequent condensation into ice below 150 K will produce amorphous ice. A denser form of amorphous ice exists below 10 K, with the transition into a crystalline form occurring above 150 K. Maximum impact velocities have been defined for all major bodies in the solar system, with the finding that crystalline ice will form in the crater while amorphous ice will form on the ejecta. The amount of each is dependent on the ratio of solidified water to condensed water vapor and on the fraction of solid ejecta.

Smoluchowski, R.↗

Estimation of crystallinity in a model thermoplastic composite

Crystallinities as low as 16 percent have been estimated by determination of the interplanar spacing on PET/carbonaceous filament composites with resin content of aobut 25 percent w/w using wide-angle X-ray scattering (WAXS) in the angular range 2 theta = 16-18 deg. The diffraction pattern of the carbonaceous reinforcements masks the major reflections of the resin, and the resin content and the crystallinity are kept low to make the simulation reasonable.

Wakelyn, N. T.↗

Alpha-decay-induced fracturing in zircon - The transition from the crystalline to the metamict state

Zonation due to alpha-decay damage in a natural single crystal of zircon from Sri Lanka is discussed. The zones vary in thickness on a scale from one to hundreds of microns. The uranium and thorium concentrations vary from zone to zone such that the alpha decay dose is between 0.2 x 10 to the 16th and 0.8 x 10 to the 16th alpha-events per milligram. The transition from the crystalline to the aperiodic metamict state occurs over this dose range. At doses greater than 0.8 x 10 to the 16th alpha events/mg there is no evidence for long-range order. This type of damage will accumulate in actinide-bearing, ceramic nuclear waste forms. The systematic pattern of fractures would occur in crystalline phases that are zoned with respect to actinide radionuclides.

Chakoumakos, Bryan C.↗

A DSC study on crystalline LaRC TPI powder - A new version with higher initial molecular weight

A new version of crystalline Langley Research Center Thermoplastic Polyimide (LaRC-TPI) imidized powder, which possesses a higher initial molecular weight (MW), has been prepared and characterized. The scheme used for cyclodehydration during the synthesis of this material is described. Evidence of a higher initial MW for the subject LaRC-TPI is supported by both measurements of the inherent viscosity and the DSC thermograms. An initial melting peak at 295 C is noted in the freshly-synthesized sample. The powder can be recrystallized at any elevated temperatures below 340 C, and a single crystalline endothemic peak is always observed after various thermal histories. The heat of fusion for the fresh sample, as represented by the area under the melting peak in the directional scanning calorimeter thermogram, is about 3.9 cal/gm. Comparisons of thermal properties for the subject material are made to those exhibited by the commercial LaRC-TPI powder.

Hou, Tan-Hung↗

Adhesive properties of a semi-crystalline polyimide

Adhesive and film properties of a new semi-crystalline polyimide, designated LARC-CPI, having a glass transition temperature of 222 C and a crystalline melt temperature of 350 C are presented. The films exhibited excellent resistance to solvents and strong base. Compact tension specimens from LARC-CPI moldings displayed a fracture energy of 37.8 lb/sq in. Titanium tensile shear specimens gave strengths of 6250 psi initially at 25 C, 7120 psi at 25 C after 1000 hours at 232 C, 2800 psi at 232 C after annealing for 5 hours at 300 C, and 3670 psi at 232 C after 100 hours at 316 C in air.

Hergenrother, P. M.↗

New transformations between crystalline and amorphous ice

High-pressure optical and spectroscopic techniques were used to obtain directly the ice I(h) - hda-ice transformation in a diamond-anvil cell, and the stability of the amorphous form is examined as functions of pressure and temperature. It is demonstrated that hda-ice transforms abruptly at 4 GPa and 77 K to a crystalline phase close in structure to orientationally disordered ice-VII and to a more highly ordered, ice-VIII-like structure at higher temperatures. This is the first time that an amorphous solid is observed to convert to a crystalline solid at low temperatures by compression alone. Phase transitions of this type may be relevant on icy planetary satellites, and there may also be implications for the high-pressure behavior of silica.

Hemley, R. J.↗

The identification of crystalline olivine in cometary silicates

An intermediate-resolution spectrum of the 8-13 micron region in comet Halley is obtained which shows a prominent silicate emission feature with structure not observed before in other comets or in interstellar silicates. The presence of a strong 11.3 micron peak reported by Bregman and coworkers is confirmed, and evidence is found for additional structure in the band. By comparison with spectra of interplanetary dust particles and laboratory silicates, it is concluded that small crystalline olivine particles are a major component of the silicates in this comet; other silicates (e.g., amorphous or hydrated) must also be present. The identification of crystalline olivine in this part of the spectrum is supported by the observation of four peaks in 20-50 micron airborne spectra of this comet which have also been attributed to olivine.

Campins, Humberto↗

Correlating DSC and X-Ray Measurements Of Crystallinity

Experiment demonstrated approximate linear correlation between degree of crystallinity of multiphase polymer (as calculated from x-ray diffraction measurements) and heat of fusion of polymer (as calculated from differential scanning calorimetry (DSC) measurements). Correlation basis of simple new technique for estimating degree of crystallinity of specimens of polymer from DSC measurements alone.

Yen, Shiao-Ping S.↗

Crystalline orientations of Tl2Ba2Ca2Cu3O(x) grains on MgO, SrTiO3, and LaAlO3 substrates

Crystalline orientations of Tl2Ba2Ca2Cu3O(x) grains in magnetron sputtered films on MgO (001), SrTiO3 (001), and LaAlO3 (001) substrates were investigated by scanning electron microscopy. In contrast to the nearly single crystalline films on the lattice matched substrates SrTiO3 and LaAlO3, films on the MgO (001) substrate, being polycrystalline in nature, exhibit several preferred in-plane grain orientations. These orientations agree well with a simplified theory of near-coincidence site lattices between Tl2Ba2Ca2Cu3O(x) and MgO.

Liou, S. H.↗

Infrared spectroscopy of homogeneously nucleated hydrazine aerosols - Disordered and crystalline phases

It is shown that aerosols generated at low temperatures and high condensation rate spontaneously form in a highly crystalline state. The resonant absorption bands in the IR spectra of these highly crystalline particles are much sharper than any reported previously in the bulk, and reveal details in the N-H vibrational bands that have not been previously observed. A disordered phase is also observed at somewhat higher temperatures. These results are consistent with this being a supercooled liquid. The fact that the spectra associated with these two aerosol phases are quite different is important to any future attempts at detecting hydrazine aerosols in planetary atmospheres by remote sensing techniques.

Dunder, T.↗

Petrography and preliminary interpretations of the crystalline breccias from the Manson M-1 core

The M-1 core was drilled on the eastern edge of the central uplift within the Manson Impact Structure in Iowa. The lower 107.9 m of the core consists of crystalline breccias. Twelve intervals of thin sections from this core have been studied for preliminary discussion. The breccias are divided into three units by matrix size and abundance. Unit 1 is characterized by a high volume fraction of matrix, and a decreasing proportion of matrix with depth. This matrix is nearly isotropic and consists of grains less than 0.005 to less than 0.02 mm in length. The matrix between 112 and 146 meters depth consists of a crystalline intergrowth of felsic and opaque minerals with or without chlorite. This was the hottest section of the core after impact, and may have undergone high temperature metamorphic recrystallization. Unit 2 is transitional between units 1 and 3, and is delineated by a rapid increase in grain size to .01-.04 mm and a decrease in matrix abundance to 10 percent. Unit 3 has a coarse, often porous matrix, whose abundance changes from about 10 percent at the top to about 2 percent at the base. Grain sizes range from 0.01-0.1 mm over this interval and coarsen with depth. Changes in the character of the matrix as well as the changes in clast lithology and abundance outlined below suggest that unit 3 is in-situ brecciated basement with injected melt and shale fragments; unit 1 is a crater veneer deposit consisting of transported basement materials and unit 2 is a mixed zone between units 1 and 3.

Bell, M. S.↗

Detectability of crystalline ferric and ferrous minerals on Mars

Telescopic and spacecraft spectroscopic and geochemical data have been used to constrain the surface mineralogy of Mars and to yield clues about past and present Mars surface weathering/alteration scenarios. Based primarily on their visible to near-IR reflectance properties, several terrestrial iron-bearing minerals have been either identified on Mars or proposed as Mars spectral analogs. Among these are crystalline hematite, pyroxenes, as well as poorly crystalline materials like nonophase hematite and palagonite. Other iron-bearing minerals include nontronite, magnetite, jarosite, and goethite and the have been proposed as Mars surface constituents based on Viking Lander measurements or geochemical modeling. If present on Mars, these materials likely appear as spectral mixtures at the coarse spatial resolution of remotely sensed data. The detectability of any of these components must be evaluated relative to the other components with which they occur. The primary goal of this study is to determine how much of any given mineral would have to be present for it to be detectable in remotely-sensed data. Here, the detectability of iron-bearing minerals was evaluated using detection threshold analysis (DTA), an analytical technique based on spectral mixture analysis.

Sabol, Donald E., Jr.↗

Transmission measurements (4000-400 cm(exp -1), 2.5-25 microns) of crystalline ferric oxides and ferric oxyhydroxides: Implications for Mars

Transmission spectra of three ferric oxides (two alpha-Fe2O3 samples and one gamma-Fe2O3 sample) and two ferric oxyhydroxides (alpha-FeOOH and gamma-FeOOH) were measured. This preliminary study has demonstrated that crystalline ferric oxides and ferric oxyhydroxides exhibit complex spectral features at thermal wavelengths. Some of these features suggest that thermal infrared observations of Mars can provide significant insight into the ferric mineralogy of that planet. The results of this study suggest that emissivity spectra of crystalline ferric oxides and ferric oxyhydroxides may prove quite important for the interpretation of thermal infrared spectral observations of Mars.

Roush, Ted L.↗

A direct process for preparing semi-crystalline polyimides

The invention is a direct process for preparing semi-crystalline polyimides. This process comprises the steps of: providing a polar aprotic solvent, adding a dianhydride and a diamine to the solvent to form a mixture, stirring the mixture at ambient temperature, and adding glacial acetic acid to the mixture to provide a ratio of polar aprotic solvent to glacial acetic acid which ranges from about 90 to 10 to about 75 to 25 by volume to form a solution. The solution was heated to a range from about 110 C to about 140 C to form a polyimide precipitate. The polyimide precipitate was recovered as a semi-crystalline polyimide powder.

Chang, Alice C.↗