Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “construction type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Hydrothermal syntheses, crystal structures and properties of 0-D, 1-D and 2-D organic-inorganic hybrid borotungstates constructed from Keggin-type heteropolyanion [alpha-BW{sub 12}O{sub 40}]{sup 5-} and transition-metal complexes

Three novel organic-inorganic hybrid borotungstates {l_brace}[Ni(phen){sub 2}(H{sub 2}O)]{sub 2}H(alpha-BW{sub 12}O{sub 40}){r_brace}.4H{sub 2}O (1), [Cu{sup I}(2,2'-bipy)(4,4'-bipy){sub 0.5}]{sub 2}{l_brace}[Cu{sup I}(2,2'-bipy)]{sub 2}Cu{sup I}(4,4'-bipy){sub 2} (alpha-BW{sub 12}O{sub 40}){r_brace} (2) and {l_brace}[Cu{sup I}(4,4'-bipy)]{sub 3}H{sub 2}(alpha-BW{sub 12}O{sub 40}){r_brace}.3.5H{sub 2}O (3) (phen=1,10-phenanthroline, 2,2'-bipy=2,2'-bipyridine, 4,4'-bipy=4,4'-bipyridine) have been hydrothermally synthesized and structurally characterized by elemental analyses, IR, UV spectra, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), single-crystal X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and photoluminescence. The structural analysis reveals that 1 consists of a 0-D bisupporting polyoxometalate cluster where two [Ni(phen){sub 2}(H{sub 2}O)]{sup 2+} cations are grafted on the polyoxoanion [alpha-BW{sub 12}O{sub 40}]{sup 5-} through two terminal oxygen atoms, 2 shows a 1-D infinite chain constructed from [alpha-BW{sub 12}O{sub 40}]{sup 5-} polyoxoanions and {l_brace}[Cu{sup I}(2,2'-bipy)]{sub 2}Cu{sup I}(4,4'-bipy){sub 2}{r_brace}{sup 3+} cations by means of alternating fashion, and 3 displays an unprecedented 2D extended structure built by [alpha-BW{sub 12}O{sub 40}]{sup 5-} polyoxoanions and -Cu{sup I}-4,4'-bipy- linear chains, in which each [alpha-BW{sub 12}O{sub 40}]{sup 5-} polyoxoanion acts as a tetradentate inorganic ligand and provides three terminal oxygen atom and one two-bridging oxygen atom. The presence of Ni{sup II} and W{sup VI} in 1, Cu{sup I} ions and W{sup VI} in 2 and 3 are identified by XPS spectra. The photoluminescence of 2 and 3 are also investigated. - Graphical abstract: Three novel organic-inorganic hybrid borotungstates {l_brace}[Ni(phen){sub 2}(H{sub 2}O)]{sub 2}H(alpha-BW{sub 12}O{sub 40}){r_brace}.4H{sub 2}O (1), [Cu{sup I}(2,2'-bipy) (4,4'-bipy){sub 0.5}]{sub 2}{l_brace}[Cu{sup I}(2,2'-bipy)]{sub 2}Cu{sup I}(4,4'-bipy){sub 2}(alpha-BW{sub 12}O{sub 40}){r_brace} (2) and {l_brace}[Cu{sup I}(4,4'-bipy)]{sub 3}H{sub 2}(alpha-BW{sub 12}O{sub 40}){r_brace}.3.5H{sub 2}O (3) have been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction, thermogravimetric analyses, X-ray photoelectron spectroscopy and photoluminescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organic-inorganic hybrids constructed by Anderson-type polyoxoanions and copper coordination complexes

Four organic-inorganic hybrid compounds based on Anderson-type polyoxoanions, namely, {l_brace}[Cu(2,2'-bpy)(H{sub 2}O){sub 3}]{sub 2}[Cr(OH){sub 6}Mo{sub 6}O{sub 18}]{r_brace}{l_brace}[Cu(2,2'-bpy)(H{sub 2}O)Cl][Cu(2,2'-bpy) (H{sub 2}O)(NO{sub 3})][Cr(OH){sub 6}Mo{sub 6}O{sub 18}]{r_brace}.18H{sub 2}O (1), [Cu(2,2'-bpy)(H{sub 2}O){sub 2}Cl]{l_brace}[Cu(2,2'-bpy)(H{sub 2}O){sub 2}][Cr(OH){sub 6}Mo{sub 6}O{sub 18}]{r_brace}.4H{sub 2}O (2), (H{sub 3}O){l_brace}[Cu(2,2'-bpy)(H{sub 2}O){sub 2}]{sub 2}[Cu(2,2'-bpy)(H{sub 2}O)]{sub 2}{r_brace}[Cr(OH){sub 6}Mo{sub 6}O{sub 18}]{sub 3}.36H{sub 2}O (3), and (H{sub 3}O){l_brace}[Cu(2,2'-bpy)(H{sub 2}O){sub 2}]{sub 2}[Cu(2,2'-bpy)(H{sub 2}O)]{sub 2}{r_brace}[Al(OH){sub 6}Mo{sub 6}O{sub 18}]{sub 3}.33H{sub 2}O (4), were isolated by conventional solution method, and crystal structures have been determined by single-crystal X-ray diffraction. Among them, compound 1 displays a discrete supramolecular structure, compound 2 shows a chainlike structure with chloro-copper complexes as counteranions, and compounds 3 and 4 are isomorphic and exhibit unique 3D open frameworks with lattice water molecules residing in the channels. The compounds 3 and 4 represent the first example of 3D organic-inorganic hybrid compounds in the TMs/2,2'-bpy/POMs system. Investigation of the reaction conditions reveals that the geometry and size of the anions together with its coordinating abilities to the metal centers have a decisive influence on both the composition and the dimensionality of the final compounds. - Graphical Abstract: Four organic-inorganic hybrids based on Anderson-type polyoxoanions have been synthesized. Compound 1 displays a discrete structure, 2 shows a chainlike structure, 3 and 4 are isomorphic and exhibit unique 3D open frameworks with lattice waters residing in the channels. The different structures suggest that the overall structures of the compounds are influenced by the nature of the acidic anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Involvement of viral envelope GP2 in Ebola virus entry into cells expressing the macrophage galactose-type C-type lectin

Highlights: {yields} Ebola virus infection is mediated by binding to and fusion with the target cells. {yields} Structural feature of the viral glycoprotein determines the infectivity. {yields} Surface C-type lectin, MGL, of macrophages and dendritic cells mediate the infection. {yields} GP2, one of glycoprotein subunits, plays an essential role in MGL-mediated infection. {yields} There is a critical amino acid residue involved in high infectivity. -- Abstract: Ebola virus (EBOV) infection is initiated by the interaction of the viral surface envelope glycoprotein (GP) with the binding sites on target cells. Differences in the mortality among different species of the Ebola viruses, i.e., Zaire ebolavirus (ZEBOV) and Reston ebolavirus (REBOV), correspond to the in vitro infectivity of the pseudo-typed virus constructed with the GPs in cells expressing macrophage galactose-type calcium-type lectin (MGL/CD301). Through mutagenesis of GP2, the transmembrane-anchored subunit of GP, we found that residues 502-527 of the GP2 sequence determined the different infectivity between VSV-ZEBOV GP and -REBOV GP in MGL/CD301-expressing cells and a histidine residue at position 516 of ZEBOV GP2 appeared essential in the differential infectivity. These findings may provide a clue to clarify a molecular basis of different pathogenicity among EBOV species.

60 APPLIED LIFE SCIENCES↗

Barberton greenstone belt volcanism: Succession, style and petrogenesis

The Barberton Mountain Land is an early Archean greenstone belt along the eastern margin of the Kaapvaal Craton of southern Africa. Detailed mapping in the southern portion of the belt leads to the conclusion that a substantial thickness is due to original deposition of volcanics and sediments. In the area mapped, a minimum thickness of 12km of predominantly mafic and ultramafic volcanics comprise the Komati, Hooggenoeg, and Kromberg Formations of the Onverwacht Group, and at least one km of predominantly pyroclastic and epiclastic sediments derived from dacitic volcanics comprise the Fig Tree Group. The Barberton greenstone belt formed primarily by ultramafic to mafic volcanism on a shallow marine platform which underwent little or no concurrent extension. Vents for this igneous activity were probably of the non-constructional fissure type. Dacitic volcanism occurred throughout the sequence in minor amounts. Large, constructional vent complexes were formed, and explosive eruptions widely dispersed pyroclastic debris. Only in the final stages of evolution of the belt did significant thrust-faulting occur, generally after, though perhaps overlapping with, the final stage of dacitic igneous activity. A discussion follows.

Byerly, G. R.↗

CORSS: Cylinder Optimization of Rings, Skin, and Stringers

Launch vehicle designs typically make extensive use of cylindrical skin stringer construction. Structural analysis methods are well developed for preliminary design of this type of construction. This report describes an automated, iterative method to obtain a minimum weight preliminary design. Structural optimization has been researched extensively, and various programs have been written for this purpose. Their complexity and ease of use depends on their generality, the failure modes considered, the methodology used, and the rigor of the analysis performed. This computer program employs closed-form solutions from a variety of well-known structural analysis references and joins them with a commercially available numerical optimizer called the 'Design Optimization Tool' (DOT). Any ring and stringer stiffened shell structure of isotropic materials that has beam type loading can be analyzed. Plasticity effects are not included. It performs a more limited analysis than programs such as PANDA, but it provides an easy and useful preliminary design tool for a large class of structures. This report briefly describes the optimization theory, outlines the development and use of the program, and describes the analysis techniques that are used. Examples of program input and output, as well as the listing of the analysis routines, are included.

Finckenor, J.↗

Evaluation of MRI and cannabinoid type 1 receptor PET templates constructed using DARTEL for spatial normalization of rat brains

Purpose: Image registration is one prerequisite for the analysis of brain regions in magnetic-resonance-imaging (MRI) or positron-emission-tomography (PET) studies. Diffeomorphic anatomical registration through exponentiated Lie algebra (DARTEL) is a nonlinear, diffeomorphic algorithm for image registration and construction of image templates. The goal of this small animal study was (1) the evaluation of a MRI and calculation of several cannabinoid type 1 (CB1) receptor PET templates constructed using DARTEL and (2) the analysis of the image registration accuracy of MR and PET images to their DARTEL templates with reference to analytical and iterative PET reconstruction algorithms. Methods: Five male Sprague Dawley rats were investigated for template construction using MRI and [{sup 18}F]MK-9470 PET for CB1 receptor representation. PET images were reconstructed using the algorithms filtered back-projection, ordered subset expectation maximization in 2D, and maximum a posteriori in 3D. Landmarks were defined on each MR image, and templates were constructed under different settings, i.e., based on different tissue class images [gray matter (GM), white matter (WM), and GM + WM] and regularization forms (“linear elastic energy,” “membrane energy,” and “bending energy”). Registration accuracy for MRI and PET templates was evaluated by means of the distance between landmark coordinates. Results: The best MRI template was constructed based on gray and white matter images and the regularization form linear elastic energy. In this case, most distances between landmark coordinates were <1 mm. Accordingly, MRI-based spatial normalization was most accurate, but results of the PET-based spatial normalization were quite comparable. Conclusions: Image registration using DARTEL provides a standardized and automatic framework for small animal brain data analysis. The authors were able to show that this method works with high reliability and validity. Using DARTEL templates together with nonlinear registration algorithms allows for accurate spatial normalization of combined MRI/PET or PET-only studies.

60 APPLIED LIFE SCIENCES↗

Thermal Performance of Uninsulated and Partially Filled Wall Cavities

Wall cavities are widely present in the construction of low rise homes since wood framing is the most common type of construction for residential buildings in the United States. The primary function of such wall construction is to provide a stable frame to which interior and exterior wall coverings can be attached and by which a roof can be supported. The existence of wall cavities increases the thermal resistance of the enclosure, particularly when they are filled with insulating material. Several design guides provide data for prediction of the thermal resistance of uninsulated wall cavities of varying internal geometries. However, U-value coefficients provided in these guides do not account for partially insulated cavities or for variations in aspect ratio. Whole building energy simulation tools, like DOE2 or Energy Plus, use simplified, 1-D characterization of building envelopes. For the most part, this characterization assumes a fixed thermal resistance over the range of temperatures experienced by the enclosure. In reality, the thermal resistance is dominated by convection and radiation and is a function of several parameters, including the temperatures and emissivities of the cavity surfaces and the aspect ratio of the cavity. This study describes detailed CFD modeling to evaluate the thermal performance of uninsulated or partially filled wall cavities accounting for conduction through framing, convection, and radiation. The resulting correlations can serve as input for DOE2 and Energy Plus modeling of older homes, where the walls are either uninsulated or partially insulated due to the settling of the insulating material. Parameters of the study are the ambient temperature outdoors, emissivity of the cavity surfaces, cavity aspect ratio, and height of the insulation level. The outcomes of this study provide: An understanding of the thermal performance of uninsulated or partially insulated wall cavities, which is an essential aspect of energy conservation in residential buildings. Accurate input for whole building simulations models like DOE2 and Energy Plus in various climate zones. Recommendations on retrofit measures.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Processes in construction of failure management expert systems from device design information

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

Malin, Jane T.↗

Peridynamic elastic waves in two-dimensional unbounded domains: Construction of nonlocal Dirichlet-type absorbing boundary conditions

The focus of this paper is on application of peridynamics (PD) to propagation of elastic waves in unbounded domains. We construct absorbing boundary conditions (ABCs) derived from a semi-analytical solution of the PD governing equation at the exterior region. This solution is made up of a finite series of plane waves, as fundamental solutions (modes), which satisfy the PD dispersion relations. The modes are adjusted to transmit the energy from the interior region (near field) to the exterior region (far field). The corresponding unknown coefficients of the series are found in terms of the displacement field at a layer of points adjacent to the absorbing boundary. This is accomplished through a collocation procedure at subregions (clouds) around each absorbing point. The proposed ABCs offer appealing advantages, which facilitate their application to PD. They are of Dirichlet-type, hence their implementation is relatively simple as no derivatives of the field variables are required. They are constructed in the time and space domains and thus application of Fourier and Laplace transforms, cumbersome for nonlocal models, is not required. At the discrete level, the modes satisfy the same numerical dispersion relations of the near field, which makes the far-field solution compatible with that of the near field. We scrutinize the performance of the proposed ABCs through several examples. So our investigation shows that the proposed ABCs perform stably in time with an appropriate level of accuracy even in problems characterized by highly-dispersive propagating waves, including crack propagation in semi-unbounded brittle solids.

42 ENGINEERING↗

On Two Algorithms of Wavelet Decomposition for Spaces of Linear Splines

The purpose of this paper is to construct new types of wavelets for minimal splines on an irregular grid. The approach applied to construct spline-wavelet decompositions uses approximation relations as an initial structure for constructing the spaces of minimal splines. The advantages of this approach are the possibilities of using irregular grids and sufficiently arbitrary nonpolynomial spline-wavelets.

97 MATHEMATICS AND COMPUTING↗

Building Specifications

The building in the top photo is the new home of the National Permanent Savings Bank in Washington, D.C., designed by Hartman-Cox Architects. Its construction was based on a money-saving method of preparing building specifications which derived from NASA technology developed to obtain quality construction while holding down cost of launch facilities, test centers and other structures. Written technical specifications spell out materials and components to be used on construction projects and identify the quality tests each item must pass. Specifications can have major impact on construction costs. Poorly formulated specifications can lead to unacceptable construction which must be replaced, unnecessarily high materials costs, safety hazards, disputes and often additional costs due to delays and litigation. NASA's Langley Research Center developed a novel approach to providing accurate, uniform, cost-effective specifications which can be readily updated to incorporate new building technologies. Called SPECSINTACT, it is a computerized - system accessible to all NASA centers involved in construction programs. The system contains a comprehensive catalog of master specifications applicable to many types of construction. It enables designers of any structure to call out relevant sections from computer storage and modify them to fit the needs of the project at hand. Architects and engineers can save time by concentrating their efforts on needed modifications rather than developing all specifications from scratch. Successful use of SPECSINTACT has led to a number of spinoff systems. One of the first was MASTERSPEC, developed from NASA's experience by Production Systems for Architects and Engineers, Inc., an organization established by the American Institute of Architects. MASTERSPEC, used in construction of the bank building pictured, follows the same basic format as SPECSINTACT and can be used in either automated or manual modes. The striking appearance of the bank building shows that, while MASTERSPEC saves time and money, its use involves no sacrfice in architectural design freedom. The Naval Engineering Facilities Command employs an automated specifications system based on SPECSINTACT. The Public Buildings Service of the General Services Administration used SPECSINTACT as a starting point in a plan to make its guideline specifications available to architects and engineers on a nationwide computer network. Public Technology, Inc., a NASA Technology Application Team, is working with Production Systems for Architects and Engineers, Inc., to promote widespread use of the system by state and local governments for cost benefits to taxpayers.

Source record↗

Functional Volume Assessment of an Early Version of the Mars Transit Habitat

During the summer of 2020, the NASA Mars Architecture Team (MAT) conducted a functional volume assessment of the Transit Habitat (TH). The TH has evolved substantially since that time and the current TH does not share the same internal configuration, but the insights gained from the assessment remain relevant. In virtually all architectures involving chemical, electric, or nuclear propulsion, the majority of the crew mission is spent aboard the TH. The Earth to Mars transit durations may vary from architecture to architecture, but all are on the order of hundreds of days, regardless of whether an opposition or conjunction class trajectory is selected, and regardless of whether the propulsion system is chemical, electric, or nuclear. Thus, the TH must provide capabilities appropriate to a very long duration. So, despite significant changes in the current Mars architecture over the past few years, this evaluation still provides useful recommendations in the form of habitability guidance that can be applied to current and future TH concepts. This assessment had six primary objectives: provide a sanity check to the BOC-derived TH layout; understand if we can fit the hardware and functional tasks in the volume; provide a high-level assessment of how aggressive the layout is; generate a list of challenges or assumptions necessary to make it work; generate a list of future work to refine understanding; and identify proposed requirements. All of this information is critical to drive habitat sizing studies and key architecture decisions. It was clear that a human-in-the-loop (HITL) evaluation of some kind would be necessary, but several challenges were immediately identified. The most information could be gleaned from a Desert Research and Technology Studies (DRATS) type of mission operations test (MOT), but the TH concept was too low fidelity to construct the type of prototype necessary to conduct a MOT, nor were their financial resources to do so. The next best option – and really the one most appropriate for the BOC’s stage of maturity – is a Virtual Reality (VR) walk-through evaluation. However, NASA was in a shutdown state due to the COVID-19 pandemic and the VR labs were inaccessible. As a result, a tabletop evaluation was created, using .jpg imagery from the ECM CAD model along with Excel-based datasheets. High-level crew living and working functions within the habitat were identified for evaluation. Questionnaires using Likert scales assessed acceptability of habitat functions and sim quality – the degree to which the function was represented in CAD. This enabled the evaluation to be conducted by personnel working remotely. Each function was evaluated individually along with several overarching habitability parameters and vehicle subsystems. The results of this evaluation are discussed, including methodological challenges and rating challenges. Acceptability results are discussed for functions that the participants were able to rate and participant comments for functions that could not be related are also described. Final conclusions are described, including challenges or assumptions needed to make the TH design acceptable, future work needed to refine understanding of the TH, and proposed habitat requirements based on test data.

Transit Habitat↗

Vibroacoustic Model Validation for a Curved Honeycomb Composite Panel

Finite element and boundary element models are developed to investigate the vibroacoustic response of a curved honeycomb composite sidewall panel. Results from vibroacoustic tests conducted in the NASA Langley Structural Acoustic Loads and Transmission facility are used to validate the numerical predictions. The sidewall panel is constructed from a flexible honeycomb core sandwiched between carbon fiber reinforced composite laminate face sheets. This type of construction is being used in the development of an all-composite aircraft fuselage. In contrast to conventional rib-stiffened aircraft fuselage structures, the composite panel has nominally uniform thickness resulting in a uniform distribution of mass and stiffness. Due to differences in the mass and stiffness distribution, the noise transmission mechanisms for the composite panel are expected to be substantially different from those of a conventional rib-stiffened structure. The development of accurate vibroacoustic models will aide in the understanding of the dominant noise transmission mechanisms and enable optimization studies to be performed that will determine the most beneficial noise control treatments. Finite element and boundary element models of the sidewall panel are described. Vibroacoustic response predictions are presented for forced vibration input and the results are compared with experimental data.

Buehrle, Ralph D.↗

Large space structures at the Marshall Space Flight Center

The Space Shuttle will provide a new capability for the construction in space of structures too large to be accommodated in the Shuttle bay. To understand and develop this new capability several construction methods and design approaches are being studied by MSFC and industry. This paper relates the general scope of these ongoing activities, the project aims and objectives, and a discussion of many design and equipment variables. Major design and construction variables, such as on-orbit or ground fabricated construction and type of materials to be used, are discussed relative to their status and applicability to various designs. Construction methods and options are reviewed and many of the support equipments under study or development are described.

Harrison, J. K.↗

PERFORMANCE OF RC AND FRC WALL PANELS REINFORCED WITH MILD STEEL AND GFRP COMPOSITES IN BLAST EVENTS

The structural integrity of reinforced concrete structures in blast events is important for critical facilities. This paper presents experimental data generated for calibrating detailed finite element models that predict the performance of reinforced concrete wall panels with a wide range of construction details under blast loading. The test specimens were 1.2 m square wall panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consists of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bar reinforcement (Type A); FRC panels without additional reinforcement (Type B); FRC panels with steel bar reinforcement (Type C); NWC panels with glass fiber reinforced polymer (GFRP) bar reinforcement (Type D); and NWC panels reinforced with steel bar reinforcement and external bidirectional GFRP overlays on both faces (Type E). An additional three Type C panels were used as control specimens (CON). Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. The panels were instrumented with strain gauges, and accelerometers; in addition, pressure sensors and high speed videos were employed during the blast events. Panel types C and E had the best performance, whereas panel type B did not perform well. Preliminary dynamic simulations show crack patterns similar to the experimental results.

36 MATERIALS SCIENCE↗

Investigation of the effects of construction and stage filling of reservoirs on the environment and ecology: Preproject baseline

The author has identified the following significant results: (1) LANDSAT imagery can be used effectively as a baseline for detection of environmental change, resulting from construction of a major inland reservoir. (2) Forest cover can be observed adequately on two-band composite enlargements at a scale of 1:130,000. (3) Forest cover delineated on LANDSAT enlargements compares accurately with ground truth at a scale of 1:250,000. (4) A dual image mapping technique superimposing winter, summer, and spring scenes using the zoom transfer scope facilitates the determination. (5) The same technique can be used to detect changes in the project area, resulting from construction activities. (6) High altitude aircraft imagery can also be used to interpret changes in land use and forest type. (7) Construction operations can be more clearly detailed on the air photos than on LANDSAT imagery.

Riggins, R. E.↗

The impact on floats or hulls during landing as affected by bottom width

For floats and hulls having V bottoms the impact force does not necessarily increase with increasing width. Therefore, the weight of the float landing gear, side walls, and other parts, and of the fuselage construction need not be increased with increasing bottom width, but the weight of the bottom construction itself, on the other hand, does not increase with increase in bottom width and is largely determined by the type of construction.

Mewes, E↗