Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Analysis of rotary balance data for the F-15 airplane including the effect of conformal fuel tanks

F-15 rotary balance data was analyzed, and the influence of control deflections, Reynolds number and airplane components, i.e., body, wing, horizontal and vertical tails, as well as conformal tanks, on the aerodynamics up to 90 degrees angle of attack are discussed. Steady state spin mode predictions using these data are presented, which show excellent correlation with spin tunnel and flight test results. Generally, the data shows damped yawing moment slopes with rotation at all angles of attack, and good control effectiveness. Differences in the rotary aerodynamics due to the addition of conformal tanks are minimal. The small differences in the region of the flat spin do, however, indicate that the resulting spin mode would be slightly flatter and faster for a conformal tank equipped airplane. The addition of conformal tanks make the airplane more departure susceptible.

Barnhart, B.↗
NASA NTRS1981

Mesh generation by conformal and quasiconformal mappings

It is pointed out that many recent advances in the finite-difference solution of elliptic equations have been limited to regions whose boundary contours coincide with coordinate lines of the Cartesian coordinate system. The reason for this is related to the fact that in the case of an arbitrary curvilinear coordinate system the original equation becomes much more complex. However, there is no added complexity if an orthogonal coordinate system is generated from a conformal mapping. In the present investigation, a finite difference method developed for the construction of conformal mappings has been generalized to construct quasi-conformal mappings. It is expected that the use of more sophisticated numerical algorithms could lead to improvements in both speed and accuracy. Quasi-conformal mappings have applications not only in the solution of elliptic equations but also in other areas such as orthogonal mesh generation on surfaces and the solution of certain fluid flow problems.

Mastin, C. W.↗
NASA NTRS1992

Evaluation of conformal and body-axis attitude information for spatial awareness

The traditional head-up display (HUD) used in most modern fighter aircraft presents attitude information that is both conformal to the outside world and aligned with the body-axis of the aircraft. The introduction of helmet-mounted display (HMD) technology into simulated and actual flight environments has introduced an interesting issue regarding the presentation of attitude information. This information can be presented conformally or relative to the aircraft's body-axis, but not both (except in the special case where the pilot's line of sight is directly matched with the aircraft's body-axis). The question addressed with this study was whether attitude information displayed in an HMD should be presented with respect to the real world (conformally) or to the aircraft's body-axis. To answer this, both conformal and body-axis attitude symbology were compared under simulated air combat situations. The results of this study indicated that the body-axis concept was a more effective HMD display. A detailed description of the flight task and results of this study will be presented.

Jones, Denise R.↗
NASA NTRS1985

Requirements for Conformal Coating and Staking of Printed Wiring Boards and Electronic Assemblies

In order to maintain the high standards of the NASA conformal coating and staking program, this publication: prescribes NASA's requirements for assuring reliable conformal coating and staking for printed wiring boards and electronic assemblies; describes and incorporates basic considerations necessary to assure reliable conformal coating and staking; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

Source record↗
NASA NTRS1997

Reduction of Calcofluor in Solithane Conformal Coatings of Printed Wiring Boards

An investigation on the outgassing of a pigment employed as a fluorescent medium in conformal coatings has been performed. The conformal coatings in question are used to protect printed wiring boards from environmental hazards such as dust and moisture. The pigment is included in the coating at low concentration to allow visual inspection of the conformal coating for flaw detection. Calcofluor, the fluorescent pigment has been found to be a significant outgasser under vacuum conditions and a potential source of contamination to flight hardware. A minimum acceptable concentration of Calcofluor for flaw detection is desirable. Tests have been carried out using a series of Solithane(TM) conformal coating samples, with progressively lower Calcofluor concentrations, to determine the minimum required concentration of Calcofluor. It was found that the concentration of Calcofluor could be reduced from 0.115% to 0.0135% without significant loss in the ability to detect flaws, while at the same time significant reductions in Calcofluor outgassing and possible contamination of systems could be realized.

Miller, Michael K.↗
NASA NTRS1997

Pilot Non-Conformance to Alerting System Commands

Instances of pilot non-conformance to alerting system commands have been identified in previous studies. Pilot non-conformance changes the final behavior of the system, and therefore may reduce actual performance from that anticipated. A simulator study has examined pilot non-conformance, using the task of collision avoidance during closely spaced parallel approaches as a case study. Consonance between the display and the alerting system was found to significantly improve subject agreement with automatic alerts. Based on these results, a more general discussion of the factors involved in pilot conformance is given, and design guidelines for alerting systems are given.

Pritchett, Amy R.↗
NASA NTRS2006

Relation between Hertz Stress-Life Exponent, Ball-Race Conformity, and Ball Bearing Life

ANSI/ABMA and ISO standards based on Lundberg-Palmgren bearing life theory are normalized for ball bearings having inner- and outer-race conformities of 52 percent (0.52) and made from pre-1940 bearing steel. The Lundberg-Palmgren theory incorporates an inverse 9th power relation between Hertz stress and fatigue life for ball bearings. The effect of race conformity on ball set life independent of race life is not incorporated into the Lundberg-Palmgren theory. In addition, post-1960 vacuum-processed bearing steel exhibits a 12th power relation between Hertz stress and life. The work reported extends the previous work of Zaretsky, Poplawski, and Root to calculate changes in bearing life, that includes the life of the ball set, caused by race conformity, Hertz stress-life exponent, ball bearing type and bearing series. The bearing fatigue life in actual application will usually be equal to or greater than that calculated using the ANSI/ABMA and ISO standards that incorporate the Lundberg-Palmgren theory. The relative fatigue life of an individual race is more sensitive to changes in race conformity for Hertz stress-life exponent n of 12 than where n = 9. However, when the effects are combined to predict actual bearing life for a specified set of conditions and bearing geometry, the predicted life of the bearing will be greater for a value of n = 12 than n = 9.

Zaretsky, Erwin V.↗
NASA NTRS2008

Relation Between Hertz Stress-Life Exponent, Ball-Race Conformity, and Ball Bearing Life

ANSI/ABMA and ISO standards based on Lundberg-Palmgren bearing life theory are normalized for ball bearings having inner- and outerrace conformities of 52 percent (0.52) and made from pre-1940 bearing steel. The Lundberg-Palmgren theory incorporates an inverse 9th power relation between Hertz stress and fatigue life for ball bearings. The effect of race conformity on ball set life independent of race life is not incorporated into the Lundberg-Palmgren theory. In addition, post-1960 vacuum-processed bearing steel exhibits a 12th power relation between Hertz stress and life. The work reported extends the previous work of Zaretsky, Poplawski, and Root to calculate changes in bearing life--that includes the life of the ball set--caused by race conformity, Hertz stress-life exponent, ball bearing type and bearing series. The bearing fatigue life in actual application will usually be equal to or greater than that calculated using the ANSI/ABMA and ISO standards that incorporate the Lundberg-Palmgren theory. The relative fatigue life of an individual race is more sensitive to changes in race conformity for Hertz stress-life exponent n of 12 than where n = 9. However, when the effects are combined to predict actual bearing life for a specified set of conditions and bearing geometry, the predicted life of the bearing will be greater for a value of n = 12 than n = 9.

Zaretsky, Erwin V.↗
NASA NTRS2020

Conformance Monitoring in Air Traffic Control

This report consists of a primer on airspace operations and a survey of previous research in the area of conformance monitoring. The report provides an overview of the topics of airspace operations, air navigation services, and conformance monitoring. Airspace operations are described in terms of missions, aircraft, and environments, including surrounding environment and technical operational environment. Air navigation services support flight crews with information and guidance to complete their flight missions safely and efficiently in a shared, dynamic, and possibly unfamiliar operational environment. Conformance monitoring is an air traffic control function to ensure that aircraft in controlled airspace adhere to assigned clearances. The report also includes a survey of previous research in the area of conformance monitoring.

Wilfredo Torres-Pomales↗
DOE OSTI2026

Small-𝑥 behavior in QCD from maximal entanglement and conformal invariance

Recent evidence suggests that, at small Bjorken 𝑥, QCD evolution drives the proton into a state of maximal entanglement. If the evolution kernel is assumed to be conformally invariant—as is the case for the Balitsky-Fadin-Kuraev-Lipatov equation—we can describe it by a conformal field theory. Moreover, the central charge 𝑐 of the corresponding conformal field theory emerges as the key parameter governing the 𝑥 dependence of both the entanglement entropy and the structure function. Here we apply the exact Bethe ansatz methods to the quantum spin chain dual to Lipatov’s high energy effective action to extract the central charge of the theory, and find that 𝑐 = 1. This implies the ∼𝑥 −1/3 small 𝑥 behavior for the structure function—the prediction that can be tested at the forthcoming Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRSDate not supplied

Additively Manufactured Ink-based Cell Batteries for Flexible Conformational Applications

With the rise of additively manufactured electronics, the importance of thin, flexible printed batteries has increased for shape-conformal electronics. Traditionally, battery cells such as industry-standard lithium-ion batteries, have been rigid and therefore unable to conform to time-variant surfaces such as smart cards/RFID devices, disposable battery-powered skin patches, foldable electronic devices, and IoT nodes. Aligned with the effort to advance technologies on printed electronics for habitat systems and advanced manufacturing, this proof-of-concept will focus on printing a 50 mAh Zn-Ag battery implementing a DIW Technique. After prototype manufacturing, electrical and environmental testing on the flexible battery cell will be conducted to the evaluate energy and power density over 50 charge cycles under standard atmosphere conditions. The project aims to provide PCB designers, fabricators, and assemblers an integrated battery package to eliminate external batteries, external wiring and connectors, and conformational complexity. Potential end uses of the printed battery process will be within Martian and lunar habitat systems, Gateway, and surface vehicles, or aerial robots where space and geometry is a restriction.

Printed Electronics↗
DOE OSTI2025

Ion-selective conformational stabilization of a disordered repeats-in-toxin protein domain

Ion-binding intrinsically disordered proteins (IDPs) recruit and bind to specific metal ions to perform critical biological functions. In proteins where ion binding and structural transitions are coupled, interactions with off-target toxic metals can dramatically disrupt protein structure and function, exemplified by lead and mercury poisoning. Understanding the complex mechanisms underlying how IDPs exclude or allow binding to different ionic species is crucial for addressing the origins of metal toxicity in biological systems. Here, we elucidate mechanisms of ion selectivity in an IDP that adopts a structure upon Ca 2+ binding. We probed ion-induced conformational changes of a repeats-in-toxin (RTX) protein domain in the presence of different ion ligands—Mg 2+ , Ca 2+ , Sr 2+ , and Ba 2+ —with chemical similarities but drastically different ionic radii. RTX adopts ion-selective conformations measured by x-ray crystallography, small-angle x-ray scattering, and circular dichroism. High-resolution x-ray structures reveal that Sr 2+ induces a nearly identical RTX structure as natively binding Ca 2+ , enabled by the intrinsic flexibility and disorder of the protein. Small-angle x-ray scattering and circular dichroism indicate that smaller Mg 2+ does not induce a significant conformational change in RTX, whereas larger Ba 2+ induces a partially folded structure. These results highlight the importance of geometric constraints imposed by protein structure in determining metal ion selectivity, yielding insights into how off-target ion binding may result in protein misfolding and malfunction.

Gudinas, Alana P. [Stanford Univ., CA (United Stat↗
DOE OSTI2024

Structure of HIV-1 RRE stem-loop II identifies two conformational states of the high-affinity Rev binding site

During HIV infection, specific RNA-protein interaction between the Rev response element (RRE) and viral Rev protein is required for nuclear export of intron-containing viral mRNA transcripts. Rev initially binds the high-affinity site in stem-loop II, which promotes oligomerization of additional Rev proteins on RRE. Here, we present the crystal structure of RRE stem-loop II in distinct closed and open conformations. The high-affinity Rev-binding site is located within the three-way junction rather than the predicted stem IIB. The closed and open conformers differ in their non-canonical interactions within the three-way junction, and only the open conformation has the widened major groove conducive to initial Rev interaction. Rev binding assays show that RRE stem-loop II has high- and low-affinity binding sites, each of which binds a Rev dimer. We propose a binding model, wherein Rev-binding sites on RRE are sequentially created through structural rearrangements induced by Rev-RRE interactions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Initial data for first-order causal viscous conformal fluids in general relativity

We solve the Einstein constraint equations for a first-order causal viscous relativistic hydrodynamic theory in the case of a conformal fluid. For such a theory, a direct application of the conformal method does not lead to a decoupling of the equations, even for constant-mean curvature initial data. We combine the conformal method applied to a background perfect fluid theory with a perturbative argument in order to obtain the result.

Disconzi, Marcelo (ORCID:0000000234497778)↗
DOE OSTI2025

Repetitive proteins that undergo large conformational changes evade structural prediction algorithms

Protein structure prediction algorithms, such as AlphaFold, have accelerated protein design and advanced the understanding of the relationship between amino acid sequence and protein structure. However, these algorithms are limited in their ability to predict the structures of conformationally dynamic, intrinsically disordered, and stimuli-responsive proteins. To evaluate sequence-to-structure predictions of such challenging proteins, we explored a class of conformationally dynamic, repeats-in-toxin (RTX) proteins. RTX proteins adopt intrinsically disordered conformations in the absence of calcium and undergo reversible folding into β-roll structures upon binding to calcium. RTX proteins are characterized by tandem repeats of the sequence GGXGXDXUX, in which X can be any amino acid and U is an aliphatic amino acid. We designed RTX sequence variants with global substitutions of nonconserved amino acids, tandem repeats of consensus sequences GGAGXDTLY, and tandem repeats of scrambled sequences GGAGXDTYL. AlphaFold2 and AlphaFold3 predicted that all of these RTX variants adopt β-roll structures, characteristic of wild-type RTX bound to calcium. However, modeling the predicted structures with molecular dynamics simulations and characterizing the protein variants with circular dichroism spectroscopy, small-angle x-ray scattering, and x-ray crystallography revealed that variants adopt diverse, sequence-dependent structures in the absence and presence of calcium. To better design proteins for applications in biotechnology and sustainability, it is critical to build predictive tools that consider intrinsically disordered protein states and validate these tools with multi-mode, multi-scale experimental data.

Chang, Marina P. [Stanford Univ., CA (United State↗
DOE OSTI2026

Many roads to the seam: How conformational flexibility drives nonadiabatic relaxation in a prototypical tetrapyrrolic chromophore

Large and structurally flexible chromophores pose challenges for in silico modeling of photodeactivation due to the many vibrational modes that can funnel the system toward energy degeneracy. In this work, we examine how the multiple degrees of freedom in biliverdin, a prototypical tetrapyrrolic chromophore, cooperate to drive access to the S 1 /S 0 intersection seam in vacuo. We begin by mapping the ground-state potential energy surface to identify representative biliverdin conformers relevant to photoexcitation. We then use a CASSCF-based framework to map the excited-state landscape and characterize the intersection seam, identifying distinct conical-intersection types. Finally, we employ ab initio multiple spawning to resolve the dynamical pathways by which the system accesses these regions. DFT potential-energy and free-energy mappings indicate that, although several conformers are relevant, the “locked-helix” ZsZsZs conformer predominates in the ground state. The intersection seam comprises numerous geometrically distinct regions characterized by varying degrees and combinations of dihedral torsion, pyramidalization, and bond-length alternation. Yet only select regions lie within energetic reach, and moderate barriers separate them from the S 1 minimum. Nonadiabatic dynamics combined with multivariate analyses show that, despite extensive mode coupling during deactivation that guides the system toward multiple regions of the seam, a single dihedral torsion, together with bond-length alternation, predominantly drives energy degeneracy. This work offers new insight into biliverdin’s intrinsic photochemical response and underscores a general feature of flexible chromophores: many modes may participate during photorelaxation, but only a limited subset ultimately dictates seam accessibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Conformation-specific synthetic intrabodies modulate mTOR signaling with subcellular spatial resolution

Subcellular compartmentalization is integral to the spatial regulation of mechanistic target of rapamycin (mTOR) signaling. However, the biological outputs associated with location-specific mTOR signaling events are poorly understood and challenging to decouple. Here, we engineered synthetic intracellular antibodies (intrabodies) that are capable of modulating mTOR signaling with genetically programmable spatial resolution. Epitope-directed phage display was exploited to generate high affinity synthetic antibody fragments (Fabs) against the FKBP12–Rapamycin binding site of mTOR (mTOR FRB ). We determined high-resolution crystal structures of two unique Fabs that discriminate distinct conformational states of mTOR FRB through recognition of its substrate recruitment interface. By leveraging these conformation-specific binders as intracellular probes, we uncovered the structural basis for an allosteric mechanism governing mTOR complex 1 (mTORC1) stability mediated by subtle structural adjustments within mTOR FRB . Furthermore, our results demonstrated that synthetic binders emulate natural substrates by employing divergent yet complementary hydrophobic residues at defined positions, underscoring the broad molecular recognition capability of mTOR FRB . Intracellular signaling studies showed differential time-dependent inhibition of S6 kinase 1 and Akt phosphorylation by genetically encoded intrabodies, thus supporting a mechanism of inhibition analogous to the natural product rapamycin. Finally, we implemented a feasible approach to selectively modulate mTOR signaling in the nucleus through spatially programmed intrabody expression. These findings establish intrabodies as versatile tools for dissecting the conformational regulation of mTORC1 and should be useful to explore how location-specific mTOR signaling influences disease progression.

Science & Technology - Other Topics↗
DOE OSTI2026

Conformalized-KANs: Uncertainty Quantification with Coverage Guarantees for Kolmogorov-Arnold Networks (KANs) in Scientific Machine Learning

This paper explores uncertainty quantification (UQ) methods in the context of Kolmogorov–Arnold Networks (KANs). We apply an ensemble approach to KANs to obtain a heuristic measure of UQ, enhancing interpretability and robustness in modeling complex functions. Building on this, we introduce Conformalized-KANs, which integrate conformal prediction, a distribution-free UQ technique, with KAN ensembles to generate calibrated prediction intervals with guaranteed coverage.} Extensive numerical experiments are conducted to evaluate the effectiveness of these methods, focusing particularly on the robustness and accuracy of the prediction intervals under various hyperparameter settings. We show that the conformal KAN predictions can be applied to recent extensions of KANs, including Finite Basis KANs (FBKANs) and multifideilty KANs (MFKANs). The results demonstrate the potential of our approaches to significantly improve the reliability and applicability of KANs in scientific machine learning.

• Artificial intelligence (AI) / machine learning ↗