Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

The Regolith of 4 Vesta: Perspectives from Howardite Meteorites and Dawn Mission Observations

4 Vesta is the largest asteroid with a basaltic surface, the only surviving differentiated asteroid recording igneous processes from the earliest phase of solar system history. The Dawn spacecraft is in orbit about Vesta pursuing a campaign of high resolution imaging and visible and infrared spectrometry of the surface; compositional mapping by gamma-ray and neutron spectrometry will follow. Vesta is heavily cratered with a surface covered by impact debris, a regolith. One important goal of the Dawn mission is to develop an understanding of regolith processes that are affecting this surface debris. Regolith characteristics are a record of interaction with the environment (e.g., impactors, dust, solar wind, galactic cosmic-rays) and give evidence of surface processes (down-gravity movement, etc.). Regolith mineralogy and composition reflect the local bedrock, with influences from regional and global mixing. Understanding regolith processes will aid in determining the lithology of underlying crust. Vesta is most likely the parent asteroid of the howardite, eucrite and diogenite meteorites. Eucrites are intrusive and extrusive mafic rocks composed mostly of ferroan low-Ca clinopyroxene and calcic plagioclase, while diogenites are cumulate magnesian orthopyroxenites. Magmatism occurred within a few million years of the formation of the solar system and then ceased. Impacts into the igneous crust produced the howardites - polymict breccias composed of mineral and lithic debris derived mostly from eucrites and diogenites. Some howardites are true regolith breccias formed by lithification of extensively impact-gardened surface debris. However, howardites have a number of significant petrologic and compositional differences from mature lunar regolith breccias and soils reflecting the different environment around Vesta compared to that at 1 AU. The most significant differences are the higher impactor flux with a lower mean impact velocity and the lower gravity. As a result, regolith processes on Vesta differ in detail from those on the Moon. Laboratory study of howardites and orbital investigation of Vesta will allow for development of robust models of regolith formation on hand sample to multi-kilometer scales.

Mittlefehldt, David W.↗
NASA NTRS1971

Apollo 15 X-ray fluorescence experiment

The X-ray fluorescence spectrometer, carried in the SIM bay of the command service module was employed principally for compositional mapping of the lunar surface while in lunar orbit, and secondarily, for X-ray astronomical observations during the trans-earth coast. The lunar surface measurements involved observations of the intensity and characteristics energy distribution of the secondary or fluorescent X-rays produced by the interaction of solar X-rays with the lunar surface. The astronomical observations consisted of relatively long periods of measurements of X-rays from pre-selected galactic sources such as Cyg-X-1 and Sco X-1 as well as from the galactic poles.

Adler, I.↗
NASA NTRS1973

Application of ERTS-1 imagery in the Vermont-New York dispute over pollution of Lake Champlain

The author has identified the following significant results. ERTS-1 imagery and a composite map derived from ERTS-1 imagery were presented as evidence in a U.S. Supreme Court case involving the pollution of an interstate water body (Lake Champlain). A pollution problem generated by a large paper mill forms the basis of the suit (Vermont vs. International Paper Co. and State of New York) and ERTS-1 imagery shows the effluent pattern on the lake surface as extending into Vermont during three different times.

Lind, A. O.↗
NASA NTRS1973

The Nimbus 5 data catalog. Volume 1: Data orbits 104 through 693, 19 December 1972 - 31 January 1973

Nimbus 5 was successfully launched from the Western Test Range at Vandenburg AFB, California, into a near circular orbit (1089 km x 1102 km) at 07 hr 56 min 00 sec GMT on 11 December 1972. All experiments and subsystems were successfully turned on. Satellite operations from launch (11 December) through orbit 103 (18 December) consisted of engineering evaluation of all spacecraft systems. As a result of that effort, data reception, accountability, and processing were intermittent during that period. Therefore, this catalog reflects documentation from orbit 104 (19 December 1972) through orbit 693 (31 January 1973). The pitch bias history, surface composition mapping radiometer, and infrared temperature profile radiometer are discussed.

Source record↗
NASA NTRS1975

Remote measurement of shoreline changes in coastal Alabama

It is shown that remotely sensed data, whether in digital or imagery form, provide objective, systematic measurements of coastal zone characteristics when compared with traditional measurement techniques. An example is given for Alabama shoreline parameters using LANDSAT 1 composite mapping.

Sapp, C. D.↗
NASA NTRS1977

A technique to correct for sample thickness variations for use with IDAPS X-ray radiograph analysis

The Image Data Processing System (IDAPS) at the Marshall Space Flight Center is used to analyze radiographs of metal samples to qualitatively and quantitatively map compositional variations across the samples. When the X-ray radiographs are of samples having thickness variations, corrections must be made to accomplish compositional analysis. A correction technique is described for cylindrical samples and is applied to radiographs of SPAR Experiment 74-18. Uncorrected and corrected images are shown.

Schafer, C. F.↗
NASA NTRS1981

Spectral mapping of Jupiter and the Galilean satellites in the near infrared

A near-infrared mapping spectrometer is included in the science complement of the Galileo Mission, which will explore Jupiter and its satellites in the mid-1980s. The objectives of the infrared mapping spectrometer experiment are to map compositional units on the surfaces of the Jovian satellites and to characterize the mineral content of these units. For Jupiter's atmosphere, this experiment will investigate such areas as cloud properties and the spatial and temporal variability of minor species. The instrument consists of a telescope, a plane grating spectrometer, a Si and InSb detector array, and a passive radiative cooler. The spectral range is 0.7-5.2 microns, covered with a resolution of 0.025 micron. A wobbling secondary mirror in the telescope provides one dimension of spatial scanning, while the other dimension is provided by motion of the spacecraft scan platform.

Carlson, R. W.↗
NASA NTRS1983

MIZEX-WEST NASA CV-990 flight report

As part of the Bering Sea marginal ice zone winter experiment (MIZEX-WEST), the CV-990 airborne laboratory was flown to assess the potential of using an extended range of wavelengths for improving passive microwave sea ice observations from spacecraft and second to provide an overview of the MIZ for large-scale processes studies. The aircraft was equipped with both imaging and fixed-beam, dual-polarized passive microwave radiometers ranging from 1.5 millimeter to 3 centimeter wavelengths. Visual, photographic, and thermal (10.7 micron) infrared surface observations were also made from the aircraft to complement the microwave measurements. The flight operations and in-flight observations are discussed and each flight is summarized including flight objective and instrument status. Preliminary mosaic images obtained with the ESMR imager, Nimbus-7 orbits over the Bering Sea, ice observations obtained by an ice observer on board, and composite maps of the general ice conditions for the month of February are also presented.

Cavalieri, D. J.↗
NASA NTRS1983

Low cost planetary science missions

The use of existing earth-orbiting satellite technology represents a potential way of fulfilling important planetary exploration goals at greatly reduced cost, at least within the region between Venus and the inner asteroid belt. The present paper reports three studies of options for such missions to near-earth asteroids, the moon and Mars. The asteroid mission projected would be that of a rendezvous with either Anteros or Eros for purposes of resource determination, using an adaptation of the Tiros-N weather satellite. Two parallel studies were done on geoscience orbiters intended to provide detailed composition mapping from low polar orbit of the moon and Mars based on the modification of the same spacecraft design: the FLTSATCOM spacecraft, and the Atmospheric Explorer/Dynamics Explorer (later changed to Tiros for combined moon-Mars missions). Studies have shown the major modifications required to involve the telecommunications, data handling, power, propulsion and attitude control subsystems, and have demonstrated concept feasibility.

French, J. R.↗
NASA NTRS1983

On gravity from SST, geoid from SEASAT, and plate age and fracture zones in the Pacific

Data from an additional 50 satellite-to-satellite tracking (SST) passes were combined with earlier measurements of the high degree and order (n, m, 12) gravity in the central Pacific. A composite map was produced which shows good agreement with conventional GEM models. Data from the SEASAT altimeter was reduced and found to agree well with both the SST and the GEM fields. The maps are dominated especially in the east, by a pattern of roughly east-west anomalies with a transverse wavelength of about 2000 km. Further comparison with regional bathymetric data shows a remarkably close correlation with plate age. Each anomaly band is framed by those major fracture zones having large offsets. The regular spacing of these fractures seems to account for the fabric in the gravity fields. Other anomalies are accounted for by hot spots. The source of part of these anomalies is in the lithosphere itself. The possible plume size and ascent velocity necessary to supply deep mantle material to the upper mantel without complete thermal equilibration is considered.

Marsh, B. D.↗
NASA NTRS1984

On gravity from SST, geoid from Seasat, and plate age and fracture zones in the Pacific

Data from an additional 50 satellite-to-satellite tracking (SST) passes were combined with earlier measurements of the high degree and order (n, m, 12) gravity in the central Pacific. A composite map was produced which shows good agreement with conventional GEM models. Data from the Seasat altimeter was reduced and found to agree well with both the SST and the GEM fields. The maps are dominated especially in the east, by a pattern of roughly east-west anomalies with a transverse wavelength of about 2000 km. Further comparison with regional bathymetric data shows a remarkably close correlation with plate age. Each anomaly band is framed by those major fracture zones having large offsets. The regular spacing of these fractures seems to account for the fabric in the gravity fields. Other anomalies are accounted for by hot spots. The source of part of these anomalies is in the lithosphere itself. The possible plume size and ascent velocity necessary to supply deep mantle material to the upper mantle without complete thermal equilibration is considered. Previously announced in STAR as N84-11559

Marsh, B. D.↗
NASA NTRS1984

On gravity from SST, geoid from Seasat, and plate age and fracture zones in the Pacific

A composite map produced by combining 90 passes of SST data show good agreement with conventional GEM models. The SEASAT altimeter data were deduced and found to agree with both the SST and GEM fields. The maps are dominated (especially in the east) by a pattern of roughly east-west anomalies with a transverse wavelength of about 2000 km. Comparison with regional bathymetric data shows a remarkedly close correlation with plate age. Most anomalies in the east half of the Pacific could be partly caused by regional differences in plate age. The amplitude of these geoid or gravity anomalies caused by age differences should decrease with absolute plate age, and large anomalies (approximately 3 m) over old, smooth sea floor may indicate a further deeper source within or perhaps below the lithosphere. The possible plume size and ascent velocity necessary to supply deep mantle material to the upper mantle without complete thermal equilibration was considered. A plume emanating from a buoyant layer 100 km thick and 10,000 times less viscous than the surrounding mantle should have a diameter of about 400 km and must ascend at about 10 cm/yr to arrive still anomalously hot in the uppermost mantle.

Marsh, B. D.↗
NASA NTRS1993

Acousto-optic infrared spectral imager for Pluto fast flyby

Acousto-optic tunable filters (AOTF's) enable the design of compact, two-dimensional imaging spectrometers with high spectral and spatial resolution and with no moving parts. Tellurium dioxide AOTF's operate from about 400 nm to nearly 5 microns, and a single device will tune continuously over one octave by changing the RF acoustic frequency applied to the device. An infrared (1.2-2.5 micron) Acousto-Optic Imaging Spectrometer (AImS) was designed that closely conforms to the surface composition mapping objectives of the Pluto Fast Flyby. It features a 75-cm focal length telescope, infrared AOTF, and 256 x 256 NICMOS-3 focal plane array for acquiring narrowband images with a spectral resolving power (lambda/delta(lambda)) exceeding 250. We summarize the instrument design features and its expected performance at the Pluto-Charon encounter.

Glenar, D. A.↗
NASA NTRS1993

The Pluto fast flyby mission: Completing the reconnaissance of the solar system

The concept of a fast flyby mission to Pluto has been advanced as a means to complete the reconnaissance of the known solar system. In order to acquire data on the Pluto system at the earliest possible time, and within the professional lifetime of investigators now active in the field, concepts are being developed for relatively small spacecraft in the mass range of 70 Kg to 350 Kg with flight times to Pluto of 7 to 13 years. Necessarily, the science complement on such a mission will be very mass and power limited. The challenge will be to define a spacecraft and an instrument package that will maximize the scientific return within these limitations. Cost, of course, will be a major consideration, and funds for new technology development specific to this mission will not be extensive. Consequently, innovative ways to incorporate elegant simplicity into the designs must be found. In order to facilitate exploration of the Pluto-Charon system, fully integrated science payloads must be developed. Two proposed mission designs involving limited mass and power science payloads have been presented to the Outer Planets Science Working Group (OPSWG). These payload mass allocations range from 5 to 30 kilograms with power allocations as low as 5 watts. The drivers behind these low mass and power allocations are that they enable developing missions to fit within the moderate mission cost profile and allow fast flight times to Pluto (7 to 13 years). The OPSWG has prioritized science goals for this class of reconnaissance mission. Three specific science objectives were identified as the highest priority required for the first Pluto mission. These goals were: (1) study of the neutral atmosphere, (2) geology and morphology, and (3) surface compositional mapping. In order to achieve these science goals within the constraints of low mass, power and cost, it may be necessary to combine the functions of 3 conventional instruments (CCD camera, Ultra-Violet Spectrometer, and Infrared Spectrometer) into one fully integrated payload. Where possible, this payload would share optics, mechanisms, electronics and packaging.

Henry, Paul K.↗
NASA NTRS1995

Elliptic surface grid generation on minimal and parmetrized surfaces

An elliptic grid generation method is presented which generates excellent boundary conforming grids in domains in 2D physical space. The method is based on the composition of an algebraic and elliptic transformation. The composite mapping obeys the familiar Poisson grid generation system with control functions specified by the algebraic transformation. New expressions are given for the control functions. Grid orthogonality at the boundary is achieved by modification of the algebraic transformation. It is shown that grid generation on a minimal surface in 3D physical space is in fact equivalent to grid generation in a domain in 2D physical space. A second elliptic grid generation method is presented which generates excellent boundary conforming grids on smooth surfaces. It is assumed that the surfaces are parametrized and that the grid only depends on the shape of the surface and is independent of the parametrization. Concerning surface modeling, it is shown that bicubic Hermite interpolation is an excellent method to generate a smooth surface which is passing through a given discrete set of control points. In contrast to bicubic spline interpolation, there is extra freedom to model the tangent and twist vectors such that spurious oscillations are prevented.

Spekreijse, S. P.↗
NASA NTRS1995

Elliptic surface grid generation on minimal and parametrized surfaces

An elliptic grid generation method, which generates boundary conforming grids in a two dimensional physical space, is presented. The method is based on the composition of an algebraic and elliptic transformation. The composite mapping obeys the Poisson grid generation system with control functions specified by the algebraic transformation. It is shown that the grid generation on a minimal surface in a three dimensional space is equivalent to the grid generation in a two dimensional domain in physical space. A second elliptic grid generation method, which generates boundary conforming grids on smooth surfaces, is presented. Concerning surface modeling, it is shown that bicubic Hermit interpolation is an excellent method to generate a smooth surface crossing a discrete set of control points.

Spekreijse, S. P.↗
NASA NTRS1999

Lunar Prospector Orbit Determination Uncertainties Using the High Resolution Lunar Gravity Models

The Lunar Prospector (LP) mission began on January 6, 1998, when the LP spacecraft was launched from Cape Canaveral, Florida. The objectives of the mission were to determine whether water ice exists at the lunar poles, generate a global compositional map of the lunar surface, detect lunar outgassing, and improve knowledge of the lunar magnetic and gravity fields. Orbit determination of LP performed at the Jet Propulsion Laboratory (JPL) is conducted as part of the principal science investigation of the lunar gravity field. This paper will describe the JPL effort in support of the LP Gravity Investigation. This support includes high precision orbit determination, gravity model validation, and data editing. A description of the mission and its trajectory will be provided first, followed by a discussion of the orbit determination estimation procedure and models. Accuracies will be examined in terms of orbit-to-orbit solution differences, as a function of oblateness model truncation, and inclination in the plane-of-sky. Long term predictions for several gravity fields will be compared to the reconstructed orbits to demonstrate the accuracy of the orbit determination and oblateness fields developed by the Principal Gravity Investigator.

Carranza, Eric↗