Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Visible–near infrared spectral indices for mapping mineralogy and chemistry with OSIRIS-REx

The primary objective of the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission is to return to Earth a pristine sample of carbonaceous material from the primitive asteroid (101955) Bennu. To support compositional mapping of Bennu as part of sample site selection and characterization, we tested 95 spectral indices on visible to near infrared laboratory reflectance data from minerals and carbonaceous meteorites. Our aim was to determine which indices reliably identify spectral features of interest. Most spectral indices had high positive detection rates when applied to spectra of pure, single-component materials. The meteorite spectra have fewer and weaker absorption features and, as a result, fewer detections with the spectral indices. Indices targeting absorptions at 0.7 and 2.7–3 µm, which are attributable to hydrated minerals, were most successful for the meteorites. Based on these results, we identified a set of 17 indices that are most likely to be useful at Bennu. These indices detect olivines, pyroxenes, carbonates, water/OH-bearing minerals, serpentines, ferric minerals, and organics. Particle size and albedo are known to affect band depth but had a negligible impact on interpretive success with spectral indices. Preliminary analysis of the disk-integrated Bennu spectrum with these indices is consistent with expectations given the observed absorption near 3 lm. Our study prioritizes spectral indices to be used for OSIRIS-REx spectral analysis and mapping and informs the reliability of all index-derived data products, including a science value map for sample site selection.

Hannah H. Kaplan↗
DOE OSTI2022

A data science approach for analysis and reconstruction of spinodal-like composition fields in irradiated FeCrAl alloys

A statistical method for the analysis of continuously distributed data representative of composition fluctuations in irradiated FeCrAl alloys acquired using Energy Dispersive X-ray Spectroscopy (EDS) method is presented. Using probability distribution functions, direct and cross-covariances between the elemental compositions, the effects of alloy composition and irradiation dose were investigated on the spatial distribution and length scale of composition fluctuations at the nanoscale. We have observed that, for neutron-irradiated FeCrAl alloys, the distribution of Fe and Cr followed a left-skewed and right-skewed distribution, respectively for all (average) alloy compositions and irradiation doses. The analysis also revealed enhanced spatial gradients in the elemental compositions at higher irradiation dose. Direct and cross-covariance estimates of the experimental data were also utilized for reconstruction of composition data through fitting it to a parametric form of the covariance functions. Linear Model of Coregionalization was used to determine the parameters of the covariance functions. Subsequently, a spectral method was utilized for simulating a realization of the alloy compositions. Close correspondence was observed between the experimental and the reconstructed data which was analyzed using probability distribution functions and covariance functions. Composition space of the experimental and reconstructed data and dislocation velocities as a function of applied stress and line directions over the entire composition maps were also examined.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Integrating Very-High-Resolution UAS Data and Airborne Imaging Spectroscopy to Map the Fractional Composition of Arctic Plant Functional Types in Western Alaska: Supporting Data

Remote sensing maps of plant functional type (PFT) fractional cover (FCover), dominant PFT, and FCover uncertainty derived from NASA's Airborne Visible / Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG). The AVIRIS-NG imaging spectroscopy data (380-2510 nm) was collected as a part of the collaboration between NASA's Arctic-Boreal Vulnerability Experiment (ABoVE; Miller et al., 2019) and DOE's Next Generation Ecosystem Experiment in the Arctic (NGEE-Arctic). This package includes maps of the NGEE-Arctic Council watershed on the Seward Peninsula, Alaska, created using AVIRIS-NG imagery collected on July 9th, 2019. The map data and metadata are provided as GeoTIFF (*.tif), ENVI image (*.dat), and text (*.txt, *hdr) formats. Additional map quicklooks are provided as *.pdf files and GIS *.kml files. These datasets are provided in support of Yang et al., (2023), "Integrating Very-High-Resolution UAS Data and Airborne Imaging Spectroscopy to Map the Fractional Composition of Arctic Plant Functional Types in Western Alaska".The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Multispectral, thermal infrared satellite data for geologic applications

The value of multispectral thermal infrared satellite data for geologic mapping was assessed, applying the principal component and canonical analysis techniques to the images of the central part of the Arabian Peninsula (a 200 x 300 km area). Low resolution thermal infrared (TIR) data from the Nimbus 5 Surface Composition Mapping Radiometer (SCMR) and the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR) were used. Color images included an 8.8 micrometer (SCMR) and 3.7 and 10.8 micrometer (AVHRR-night) data, ratioed AVHRR day/night TIR data, ratioed AVHRR reflected radiation data, and transformed 8- and 10-band TIR plus reflected radiation data. The results clearly demonstrated the potential geologic value of multispectral TIR data. Igneous and metamorphic units could be separated as a class (although not from each other except for young calc-alkaline granites). Some previously unmapped extensions of mapped faults below thick sedimentary units could be delineated. No single enhancement technique displayed all the potential information, implying that they should be used together.

Blodget, H. W.↗
NASA NTRS2011

Mapping Vesta: First Results from Dawn's Survey Orbit

The geologic objectives of the Dawn Mission [1] are to derive Vesta s shape, map the surface geology, understand the geological context and contribute to the determination of the asteroids origin and evolution. Geomorphology and distribution of surface features will provide evidence for impact cratering, tectonic activity, volcanism, and regolith processes. Spectral measurements of the surface will provide evidence of the compositional characteristics of geological units. Age information, as derived from crater size-frequency distributions, provides the stratigraphic context for the structural and compositional mapping results, thus revealing the geologic history of Vesta. We present here the first results of the Dawn mission from data collected during the approach to Vesta, and its first discrete orbit phase - the Survey Orbit, which lasts 21 days after the spacecraft had established a circular polar orbit at a radius of approx.3000 km with a beta angle of 10deg-15deg.

Jaumann, R.↗
NASA NTRS2011

Geoscientific Mapping of Vesta by the Dawn Mission

The geologic objectives of the Dawn Mission are to derive Vesta's shape, map the surface geology, understand the geological context and contribute to the determination of the asteroids' origin and evolution. Geomorphology and distribution of surface features will provide evidence for impact cratering, tectonic activity, volcanism, and regolith processes. Spectral measurements of the surface will provide evidence of the compositional characteristics of geological units. Age information, as derived from crater size-frequency distributions, provides the stratigraphic context for the structural and compositional mapping results into the stratigraphic context and thusrevealing the geologic history of Vesta.

lunar mapping↗
NASA NTRS1991

Directional solidification of HgCdTe and HgZnTe in a transverse magnetic field

Hg(0.80)Cd(0.20)Te crystals were grown vertically in a transverse magnetic field by directional solidification. The effect of a magnetic field on the nature of fluid flow in the melts was investigated by measuring compositional variations along the axial and radial directions of the grown ingots. Magnetic field effects were shown to be significant over the entire field range employed (i.e., 2 to 5 kG). The axial compositional profiles (determined by precision density measurements) showed an abrupt decrease in the mole fraction of CdTe when the field was applied. Radial compositional mapping by IR transmission and X-ray energy dispersion spectrometry indicated that the solid-liquid interface evolved through three stages when the field was applied (i.e., from a radially symmetric concave interface to an off-center concave shape when the field was initially applied, then to a tilted plane, and, finally, to an off-center concave interface). The axial compositional profile of an Hg(0.84)Zn(0.16)Te ingot showed similar field effects.

Su, Ching-Hua↗
NASA NTRS2010

Geology of Libya Montes and the Interbasin Plains of Northern Tyrrhena Terra, Mars: First Year Results and Second Year Work Plan

The Libya Montes-Tyrrhena Terra highland-lowland transitional zone of Mars is a complex tectonic and erosional region that contains some of the oldest exposed materials on the Martian surface as well as aqueous mineral signatures that may be potential chemical artifacts of early highland formational processes. Our 1:1M scale mapping project includes the geologic materials and landforms contained within MTMs 00282, -05282, -10282, 00277, - 05277, and -10277, which cover the highland portion of the transitional zone. The map region extends from the Libya Montes southward into Tyrrhena Terra and to the northern rim of Hellas basin and includes volcanic rocks of Syrtis Major Planum and a broad lowlying plain (palus) that forms a topographic divide between Isidis and Hellas basins. The objective of this project is to describe the geologic history of regional massif and plains materials by combining geomorphological and compositional mapping observations. This abstract summarizes the technical approaches and interim scientific results of Year 1 efforts and the expected work plan for Year 2 efforts.

Skinner, J. A., Jr.↗
NASA NTRS1987

Multiplatform sampling (ship, aircraft, and satellite) of a Gulf Stream warm core ring

The purpose of this paper is to demonstrate the ability to meet the need to measure distributions of physical and biological properties of the ocean over large areas synoptically and over long time periods by means of remote sensing utilizing contemporaneous buoy, ship, aircraft, and satellite (i.e., multiplatform) sampling strategies. A mapping of sea surface temperature and chlorophyll fields in a Gulf Stream warm core ring using the multiplatform approach is described. Sampling capabilities of each sensing system are discussed as background for the data collected by means of these three dissimilar methods. Commensurate space/time sample sets from each sensing system are compared, and their relative accuracies in space and time are determined. The three-dimensional composite maps derived from the data set provide a synoptic perspective unobtainable from single platforms alone.

Smith, Raymond C.↗
NASA NTRS2001

Comparison of full-aperture interferometry to sub-aperture stitched interferometry for a large diameter fast mirror

The Herschel Space Observatory (formerly known as FIRST) consists of a 3.5 m space telescope. Stitching sub aperture interferograms may offer considerable cost savings during testing of the flight telescope as compared to other techniques. A comparative demonstration is presented of interferogram stitching techniques that enable a composite map of a 3-D surface to be assembled from a sequence of sub-aperture measurements. This paper describes the fundamental procedures for stitching together component data sets and demonstrates such techniques with real data sets.

carbon fiber composite cryogenic optics high slope↗
NASA NTRS1988

Highly automated transmission-edge mapping

Instrumentation and software are described, which are used to determine maps of properties of materials based on optical transmission spectra. In addition to a Fourier transform spectrometer, the hardware includes an xy-stage containing a small stationary aperture and two computer controlled stepper motors for positioning the sample. This idea has been used for years but this implementation is highly automated compared to those previously described. All mapping has been in the 2-15 micron wavelength range but this is not an inherent limitation of the technique. In this spectral range, useful results may be obtained with apertures as small as 25 microns in diameter. The software is described including the algorithm for obtaining the cut-on wavelength from a semiconductor spectrum. Data from both transverse slices and longitudinal slabs of narrow bandgap alloy semiconductors are shown including composition maps for materials solidified with convex and concave growth interfaces.

Szofran, F. R.↗
NASA NTRS2011

The Regolith of 4 Vesta: Perspectives from Howardite Meteorites and Dawn Mission Observations

4 Vesta is the largest asteroid with a basaltic surface, the only surviving differentiated asteroid recording igneous processes from the earliest phase of solar system history. The Dawn spacecraft is in orbit about Vesta pursuing a campaign of high resolution imaging and visible and infrared spectrometry of the surface; compositional mapping by gamma-ray and neutron spectrometry will follow. Vesta is heavily cratered with a surface covered by impact debris, a regolith. One important goal of the Dawn mission is to develop an understanding of regolith processes that are affecting this surface debris. Regolith characteristics are a record of interaction with the environment (e.g., impactors, dust, solar wind, galactic cosmic-rays) and give evidence of surface processes (down-gravity movement, etc.). Regolith mineralogy and composition reflect the local bedrock, with influences from regional and global mixing. Understanding regolith processes will aid in determining the lithology of underlying crust. Vesta is most likely the parent asteroid of the howardite, eucrite and diogenite meteorites. Eucrites are intrusive and extrusive mafic rocks composed mostly of ferroan low-Ca clinopyroxene and calcic plagioclase, while diogenites are cumulate magnesian orthopyroxenites. Magmatism occurred within a few million years of the formation of the solar system and then ceased. Impacts into the igneous crust produced the howardites - polymict breccias composed of mineral and lithic debris derived mostly from eucrites and diogenites. Some howardites are true regolith breccias formed by lithification of extensively impact-gardened surface debris. However, howardites have a number of significant petrologic and compositional differences from mature lunar regolith breccias and soils reflecting the different environment around Vesta compared to that at 1 AU. The most significant differences are the higher impactor flux with a lower mean impact velocity and the lower gravity. As a result, regolith processes on Vesta differ in detail from those on the Moon. Laboratory study of howardites and orbital investigation of Vesta will allow for development of robust models of regolith formation on hand sample to multi-kilometer scales.

Mittlefehldt, David W.↗
DOE OSTI2023

Geothermal Play Fairway Analysis for Low-Temperature Resources in the Denver Basin

This dataset is part of an effort to highlight the advantages of incorporating low-temperature (< 150 C) geothermal resource evaluation into the implementation of combined heat and power (CHP), and geothermal direct use (GDU) technologies (e.g., space heating and/or cooling). For this Denver Basin example, resource favorability maps were created to identify potentially favorable areas for further geothermal exploration and are provided here. Favorability was based on three types of data: (1) geologic, (2) economic, and (3) risk. This raw data is also provided below. Geologic data include bottom-hole temperatures (BHT) from oil and gas wells, water co-production volumes from oil and gas wells, well groundwater levels, hot spring locations, temperatures, and chemistries, faults, and earthquakes. Economic feasibility data include population, thermal energy demand, infrastructure, and roads. Risk data (which includes data on excluded areas) include flood plains, protected lands (e.g. wildlife conservation areas, national parks). The included report describes this project in detail, covering workflows, relevant datasets, Python code, and both common and composite maps used to create low-temperature geothermal resource favorability maps for the Denver Basin, which extends across Colorado, Nebraska, and Wyoming. The figures in this report include: maps of the original datasets; maps of transformed data and derived parameters (such as the geothermal gradient or thermal conductivity); results of uncertainty analyses; results of data completeness (using the GeoRePORT tool); examples of the data combination and processing (using the geoPFA Python library, which is introduced in the attached report); favorability maps for each criteria; and a final combined favorability map. This project is designed to facilitate future deployment of CHP and GDU by providing data, tools, and a workflow applicable to low-temperature geothermal resources in sedimentary basins.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

High-Spatial-Resolution Quantitative Chemomechanical Mapping of Organic Composite Cathodes for Sulfide-Based Solid-State Batteries

Understanding the chemo-mechanical behaviors of electrodes, particularly at the electrode/electrolyte interfaces, is critical for improving the performance of all-solid-state batteries. However, due to the instability of electrolyte materials under ambient conditions, such characterizations are challenging, particularly for sulfide-based all-solid-state batteries. Herein, by combining time-of-flight secondary-ion mass spectroscopy (ToF-SIMS) and in-SEM nanoindentation measurements, a systematic quantitative investigation of the chemo-mechanical behaviors of pyrene-4,5,9,10-tetraone (PTO) /Li 6 PS 5 Cl composite cathodes is carried out. Chemical and quantitative mechanical information of the composite cathode were collected with high spatial resolution after developing and implementing an air-free characterization protocol. By directly connecting the Young’s modulus and hardness with the Li distribution in the composite cathode, a comprehensive chemo-mechanical mapping of the PTO/ Li 6 PS 5 Cl composite cathode has been established. Furthermore, this work improves our knowledge of the critical chemo-mechanical phenomena that occur at the cathode/electrolyte interfaces in all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Silicon-Lattice-Matched Boron-Doped Gallium Phosphide: A Scalable Acousto-Optic Platform

The compact size, scalability, and strongly confined fields in integrated photonic devices enable new functionalities in photonic networking and information processing, both classical and quantum. Gallium phosphide (GaP) is a promising material for active integrated photonics due to its high refractive index, wide bandgap, strong nonlinear properties, and large acousto-optic figure of merit. Here, this study demonstrates that silicon-lattice-matched boron-doped GaP (BGaP), grown at the 12-inch wafer scale, provides similar functionalities as GaP. BGaP optical resonators exhibit intrinsic quality factors exceeding 25,000 and 200,000 at visible and telecom wavelengths, respectively. It further demonstrates the electromechanical generation of low-loss acoustic waves and an integrated acousto-optic (AO) modulator. High-resolution spatial and compositional mapping, combined with ab initio calculations, indicate two candidates for the excess optical loss in the visible band: the silicon-GaP interface and boron dimers. These results demonstrate the promise of the BGaP material platform for the development of scalable AO technologies at telecom and provide potential pathways toward higher performance at shorter wavelengths.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Effect of APS-HVOF Bond Coating Thickness Ratio on TBC Furnace Cycle Lifetime

In this work, combinations of NiCoCrAlY APS and high-velocity oxygen fuel (HVOF) bond coatings were deposited on alloy 247 disk substrates with APS yttria-stabilized zirconia (YSZ) top coatings to assess the benefit of air plasma sprayed (APS) ‘flash’ bond coatings. Using 1-h cycles at 1100 °C in air with 10% H 2 O and HVOF-only and APS-only bond coatings as a baseline, it was found that APS flash coatings extended the average coating lifetime by 16% to 35% with the thicker flash coating performing best. Principal component analysis and energy dispersive spectroscopy (EDS) compositional mapping on coatings characterized after 0, 100, 300 and 500 cycles and after failure showed that the Al in the bond coatings was depleted due to both oxidation and back diffusion into the substrate. The APS-only bond coating had significant oxidation throughout the bond coating and was so depleted in Al, that Al diffused from the substrate to the coating. Residual stress maps of the thermally-grown alumina scale were obtained every 100 cycles using photo-stimulated luminescence piezospectroscopy (PLPS) revealing that the Thick Flash coating had the slowest rate of damage accumulation in the oxide scale.

alumina scale↗
DOE OSTI2021

An extended polynomial chaos expansion for PDF characterization and variation with aleatory and epistemic uncertainties

This paper presents an extended polynomial chaos formalism for epistemic uncertainties and a new framework for evaluating sensitivities and variations of output probability density functions (PDF) to uncertainty in probabilistic models of input variables. An ”extended” polynomial chaos expansion (PCE) approach is developed that accounts for both aleatory and epistemic uncertainties, modeled as random variables, thus allowing a unified treatment of both types of uncertainty. We explore in particular epistemic uncertainty associated with the choice of prior probabilistic models for input parameters. A PCE-based Kernel Density (KDE) construction provides a composite map from the PCE coefficients and germ to the PDF of quantities of interest (QoI). Here, the sensitivities of these PDF with respect to the input parameters are then evaluated. Input parameters of the probabilistic models are considered. By sampling over the epistemic random variable, a family of PDFs is generated and the failure probability is itself estimated as a random variable with its own PCE. Integrating epistemic uncertainties within the PCE framework results in a computationally efficient paradigm for propagation and sensitivity evaluation. Two typical illustrative examples are used to demonstrate the proposed approach.

Aleatory uncertainty↗
DOE OSTI2022

A functional global sensitivity measure and efficient reliability sensitivity analysis with respect to statistical parameters

Sensitivity analysis and reliability assessment are two important aspects of structural and system safety. Epistemic uncertainty with respect to probabilistic model of input parameters due to lack of knowledge is present in many scarce-data applications and complicates the characterization of uncertainty in model response. In this article, we present two importance measures to evaluate the impact of distribution parameters on the probability distribution function (PDF) of the output and the failure probability. The epistemic uncertainty associated with the distribution parameters is modeled as random variables. Additionally, a modified extended polynomial chaos expansion (MEPCE) approach is introduced in which aleatory and epistemic random variables are modeled and propagated simultaneously while allowing the separate assessment for any single epistemic variable. A MEPCE-based kernel density estimation (KDE) construction provides a composite map from each epistemic variable to the response PDF. The functional global sensitivity index of the PDF with respect to the distribution parameters is thus derived, as a function of output, which is both more informative and more efficient than standard scalar sensitivity measures. Reliability sensitivity indices can be readily evaluated by integrating the global sensitivity index function over the failure zone. Three illustrative examples are used to demonstrate the proposed methodology.

42 ENGINEERING↗