Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite Li anode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Highly Ordered Hierarchical Anodes for Extreme Fast Charging Batteries (Final Report)

The goal of this project is to enable extreme fast charging (XFC) of Li-ion batteries, which was accomplished through a combination of 1) rational design and manufacturing of hierarchically structured anode architectures; 2) blending graphite/hard carbon into a bulk hybrid anode; 3) engineering artificial solid-electrolyte interphase (SEI) coatings with reduced interphase impedance; 4) computational modeling of coupled transport, kinetic, and electrochemical phenomena; and 5) improved fundamental understanding of lithium plating through operando analysis. This work integrated structural, compositional, and surface modification of graphite anodes, multi-physics modeling of ion transport, electrochemical activity, and heat transfer, advanced strategies to detect Li plating, and semi-automated roll-to-roll cell assembly. The unique facilities at the University of Michigan (UM) and Sandia National Laboratories (SNL) were leveraged to manufacture, prototype, and characterize commercially relevant >2Ah and >180 Wh/kg cells with a target of <20% capacity fade over 500 XFC cycles.

25 ENERGY STORAGE↗
DOE OSTI2023

Improving the Long-term Cycle Performance of xLi 2 MnO 3 ·(1-x)LiMeO 2 /Li 4 Ti 5 O 12 Cells via Prelithiation and Electrolyte Engineering

Toward the development of high energy density and long lifetime batteries for behind-the-meter storage (BTMS) applications, Li- and Mn-rich layered oxide cathode (xLi 2 MnO 3 ·(1-x)LiMeO 2 , Me = Ni, Mn, and etc., LMR-NM) and Li 4 Ti 5 O 12 (LTO) anode system was examined. To mitigate the major degradation mechanisms at each electrode (i.e., loss of Li inventory (LLI) at the anode and transition metal dissolution and oxygen release at the cathode), two approaches were taken—prelithiating the LTO electrode and varying the electrolyte solvent compositions. The effect of prelithiation and electrolyte engineering on the long-term cycle performance of LMR-NM/LTO cells were systematically evaluated via electrochemical analyses and post-mortem characterizations. By using a prelithiated LTO anode and supplying additional Li to the system, the capacity retention of LMR-NM/LTO system was improved. The degree of enhancement was dependent on the types of electrolytes used, as their decomposition products determined the level of LLI. With increased capacity retention, however, the cathode was utilized to a greater extent, resulting in more severe loss of the cathode active material. Thus, all degradation mechanisms should be considered comprehensively when designing high performance LMR-NM/LTO cells to account for their complex interplay.

25 ENERGY STORAGE↗
DOE OSTI2026

Electrode-omics reveals epochs in silicon anode evolution underpinning electrochemomechanical resilience

Here, we advance electrode-omics to identify evolutionary bursts by which ethereal locally superconcentrated electrolytes (LSCEs) mitigate silicon anode degradation through its epochs of electrochemical and chemical reactions. Anode composites form initially at high potential from ethereal solvent and anion [bis(fluorosulfonyl)imide (FSI − )] redox. A first evolutionary burst at lower potential enriches composites with lithium alkoxides (LiO–R) and lithium oxide (Li 2 O) and depletes sulfur oxides (SO x ) species. As the cells are cycled, a second evolutionary burst takes place, where previously extinct SO x species reemerge concurrently with a loss of LiO–R and Li 2 O. This identifies reactions rooted in “SuFEx” chemistry, where oxoanionic LiO–R and Li 2 O species, electrochemically generated in the solid-electrolyte interphase, chemically react with FSI − in the electrolyte to form emergent species. This sequence of evolutionary bursts produces a mechanically resilient composite that reduces silicon anode cracking over hundreds of cycles, leading to overpotential increase of only ~0.01 volts after 200 cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Co-intercalation-free ether electrolytes for graphitic anodes in lithium-ion batteries

Carbonate-based electrolytes are widely used in Li-ion batteries but are limited by a small operating temperature window and poor cycling with silicon-containing graphitic anodes. The lack of non-carbonate electrolyte alternatives such as ether-based electrolytes is due to undesired solvent co-intercalation that occurs with graphitic anodes. Here, we show that fluoroethers are the first class of ether solvents to intrinsically support reversible lithium-ion intercalation into graphite without solvent co-intercalation at conventional salt concentrations. In full cells using a graphite anode, they enable 10-fold higher energy densities compared to conventional ethers, and better thermal stability over carbonate electrolytes (operation up to 60 °C) by producing a robust solvent-derived solid electrolyte interphase (SEI). As single-solvent–single-salt electrolytes, they remarkably outperform carbonate electrolytes with fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives when cycled with graphite–silicon composite anodes. In conclusion, our molecular design strategy opens a new class of electrolytes that can enable next generation Li-ion batteries with higher energy density and a wider working temperature window.

25 ENERGY STORAGE↗
DOE OSTI2022

High-performance all-solid-state Li–S batteries enabled by an all-electrochem-active prelithiated Si anode

The development of all-solid-state Li–S batteries has been greatly impeded by dendrite growth and dendrite penetration, which are both related to the Li metal anode. As a compromised alternative, we report lithium silicide (Li x Si) as a dendrite-free and high-capacity anode with Li source. Here, the as-synthesized Li x Si is relatively soft, highly electronically conductive, and with a high Li diffusivity. These distinctive properties make Li x Si anode viable as an “all-electrochem-active” electrode (consisted of 100 wt.% Li x Si). Compared with the typical composite electrode, the all-electrochem-active electrode not merely maximizes the electrode-level energy density but also minimizes the electrolyte-related interfacial degradation. Li x Si symmetric cell demonstrates a reversible cycling at 4 mA cm –2 for over 320 h. Stress change and morphological evolution of the Li x Si electrode are investigated upon dealloying/alloying. When paired with a S cathode (active mass loading of 3 mg cm –2 ), Li x Si–S full cell shows a good cycling behavior over 500 cycles and rate performance (69% capacity retained at 1.2C) even at 25 °C.

25 ENERGY STORAGE↗
DOE OSTI2020

Challenges for and Pathways Toward Solid-State Batteries

Solid-state batteries utilizing lithium metal anodes have the potential to enable batteries with a specific energy of >500 Wh/kg and an energy density of >1,500 Wh/L for thousands of cycles. When optimized they will improve the energy efficiency, operating temperature range, sustainability, and safety at a lower cost compared to projections for advanced Li-ion batteries. This improved performance is critical for the widespread adoption of electric vehicles and may enable future applications such as electric aviation. Expectations for solid-state batteries are high, there are significant materials and processing challenges that need to be overcome. Some of these challenges are well known; others are more subtle and are just becoming known. The challenges and their solutions must be clearly identified to realize high-energy solid-state Li metal batteries. In the United States, the U.S. Department of Energy (DOE) funds the majority of energy storage research and development, including solid state battery research. Web of Science publication analysis shows that worldwide DOE is second largest funder. Work on solid state batteries is distributed across different arms of DOE and is coordinated at headquarters to ensure a broad national portfolio for advanced batteries, including lithium batteries and solid-state battery devices. We note that university and national laboratory researchers in the US with a long-standing interest in solid state batteries is a small, integrated community with recognized impact for publications, patents and startup companies. The opportunity for this group to engage for research with international colleagues is growing, fostered by periodic bilateral meetings supported by DOE and by the recent joint US German research program for lithium battery interface studies. These are valuable opportunities to speed solid-state battery development. The ORNL led virtual workshop, overviewed here, confirms the community’s shared vision of the exciting advances, opportunities, and challenges. Further, we are seeing that this workshop has spawned several new informal collaborations and draft proposals. This encourages us to propose future discussion. On May 11, 2020, Oak Ridge National Laboratory (ORNL) hosted a 6-hour, on-line national workshop to discuss recent advances and most the prominent obstacles to realizing solid-state Li metal batteries. The workshop included more than 30+ experts from national laboratories, universities, and companies, all of whom have worked on solid-state batteries for multiple years. The participants shared recent advances, many not yet in print, illustrating that the community has gained significant new insights for solid-state Li battery materials over the last 5 years. In this report, the major outcomes of the workshop are organized to identify the gaps in our scientific knowledge for four core materials science areas: (1) Li metal anodes, (2) the solid electrolyte in contact with Li metal, (3) active cathode materials and solid-state composite cathodes, and (4) solid electrolytes. Illustrative examples and discussions are reported with the more comprehensive issues in the report. Discussion of additional challenges related to processing of solid-state battery materials and to the designs and architectures for mechanically robust, long-lived batteries received less attention due to time constraints. These are good themes for deeper discussion at a follow-on workshop, where a complete list of critical research topics can be identified.

25 ENERGY STORAGE↗
DOE OSTI2022

Increasing the Pressure‐Free Stripping Capacity of the Lithium Metal Anode in Solid‐State‐Batteries by Carbon Nanotubes

Abstract Lithium metal is the key anode material for solid‐state‐batteries as its successful implementation will drastically increase their energy and power densities. However, anode contact loss during stripping leads to dendrites upon plating and subsequent cell failure. Design strategies to mitigate these issues are crucial to enable the use of lithium metal anodes. This paper reports the dissolution kinetics of composite anodes made of lithium metal and carbon nanotubes (CNTs) with a garnet‐type solid electrolyte (SE). In addition to an enhancement of the effective diffusion within the anode, its dissolution is fundamentally changed from being 2D to 3D. By maintaining contact with the SE, the CNTs facilitate lithium transport to the interface, which yields more than 20 mAh cm −2 discharge capacity at 100 µ A cm −2 without the application of external stack pressure ( > 1 MPa). Conclusions drawn from electrochemical data on the anode microstructure are validated using cryo‐focused‐ion‐beam scanning electron microscopy and correlated with the mechanical properties. Micro‐indentation, acoustic analysis, and stress–strain testing show that mechanical properties of the anode, like yield strength and hardness, are adjustable. Overall, it is shown that the mechanical and electrochemical properties of Li–CNT composite electrodes can be tailored to suit the requirements of a practical cell.

Fuchs, Till↗
DOE OSTI2022

Benchmarking Solid-State Batteries Containing Sulfide Separators: Effects of Electrode Composition and Stack Pressure

Integrating sulfide separators into solid-state batteries (SSBs) containing high energy cathodes typically requires one or more materials and engineering solutions including: (i) applying interfacial coatings to mitigate electrolyte decomposition, (ii) applying high stack pressures to form robust solid-solid contacts, and (iii) using alloying anodes to avoid Li dendrite formation. Despite the promise of these approaches, a lack of standardized testing protocols makes it difficult to directly compare results among different studies. To address this problem, the present work benchmarks the performance of SSBs containing β-Li 3 PS 4 (LPS) separators and composite cathodes. By systematically varying the anode/cathode composition and stack pressure, this work demonstrates that cathode design is a major bottleneck for solid-state cells cycled at low rates (<100 µA cm -2 ). Operando stack pressure measurements show that, while mechanical confinement generally promotes higher active material utilization and cycling stability, this strategy alone does not address interfacial reactivity between LPS and high voltage cathodes. Here, these results also demonstrate that stress evolution during cycling is dominated by volume changes at the Li metal anode. Finally, we show that FeS 2 cathodes with moderate operating voltages (<3 V vs Li/Li + ) exhibit superior cycling performance compared to high voltage cathodes by facilitating formation of stable cathode/electrolyte interfaces.

25 ENERGY STORAGE↗
DOE OSTI2023

Microstructured ion-conducting composites and uses thereof

A composite membrane with nanostructured inorganic and organic phases is applied as an ion-selective layer to prove processability, prevent dendrite shorting, and increase power output of lithium-metal anodes through better Li-ion conductivity. Nanoconfinement, as opposed to macroscale confinement, is known to dramatically alter the properties of bulk materials. Control over a ceramic's size, shape, and properties is achieved with polymer templates. This is a new composition of matter and unique approach to composite membrane design.

Frischmann, Peter David↗
DOE OSTI2020

Effect of overcharge on Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 /Graphite cells–effect of binder

Cells based on NMC/graphite, containing styrene-butadiene rubber/carboxymethylcellulose binder in the anodes and pVdF latex/carboxymethykellulose in the cathodes, were systematically overcharged to 100, 120, 140, 160, 180, 250% and 270% state-of-charge. The impact of the binder was characterized by elemental analysis, SEM, and HPLC. These results were compared to similar cells just using the poly (vinylidene difluoride) binder. Not only did the binder impact the rate of transition metal transport from the cathode to the anode, it also had a marked effect on the microstructure and composition of the materials on the anode surface.

25 ENERGY STORAGE↗
DOE OSTI2024

Impact of Pressure Distribution and Magnitude on the Performance of Lithium Metal Anodes

Li metal anodes are a critical battery technology due to their ability to substantially increase the energy density of Li-based batteries. It is well known that pressure greatly impacts the performance of a Li-metal anode. However, precisely how the pressure value and distribution of pressure affect performance is unclear. Furthermore, the solid-electrolyte interphase composition that forms under varying pressure distributions remains a key parameter for practical lithium metal anodes. In this work, different pressure distributions were employed by using differently shaped and oriented mechanical springs in the coin cells, resulting in varying contact points. Pressure-sensitive films were used to spatially map the pressure and correlate it to the performance. It was found that higher average pressure does not necessarily have a positive effect on performance. When high pressure is paired with poor pressure uniformity, the performance is in fact worse likely due to the current focusing effect, rendering unsatisfied cycling stability. This work points to the importance of controlling the relationship between average pressure and pressure uniformity.

25 ENERGY STORAGE↗
DOE OSTI2022

Extreme fast charge aging: Correlation between electrode scale and heterogeneous degradation in Ni-rich layered cathodes

Extreme fast charging (XFC) is a key requirement for the adoption of battery-based electric vehicles by the transportation sector. However, XFC has been shown to accelerate degradation, causing the capacity, life, and safety of batteries to deteriorate. There are no systematic studies in the open literature regarding aging modes in Ni-rich Li y Ni 0.a Mn 0.b Co 0.c O 2 (NMCabc) cathodes caused by fast charging. Herein, we report the effects of cathode composition and electrode loading in pouch cells containing NMC532, 622 and 811 paired with graphite and cycled under XFC conditions. The relative anisotropic volume change in the unit cell increases with Ni content in low-loading cells, while it levels up for all three NMC cathodes in high-loading cells because of substantial Li plating. The amounts of lithium plating and heterogeneity on the anode, determined by crystallographic phase quantification, were found to be correlated with electrode loading and cathode heterogeneity. The concentrations of the transition metals deposited on the anodes depend on NMCabc composition in a complex way. More particle cracking and surface degradation was found in NMC811. Here, the findings in this work provide a new understanding of the failure mechanisms and their practical implications for compositional tuning of future high-Ni NMCabc cathode materials during fast charging.

25 ENERGY STORAGE↗
DOE OSTI2024

Stable Cycling of Mg Metal Anodes by Regulating the Reactivity of Mg 2+ Solvation Species

Rationally designing stable nonaqueous electrolytes for Mg metal anodes demands a thorough understanding of their interfacial behaviors. Here, the critical role of cation–anion pairing in improving the cathodic stabilities of amine-based electrolytes against solvent reduction and H 2 evolution is identified. It is demonstrated that strong coordination between solvating amine groups and the Mg 2+ cation facilitates the dehydrogenation of the -NH 2 group, which is mainly responsible for low reversibility during Mg metal plating and stripping. Introducing ion-pairing into the primary solvation shell can effectively weaken the amine coordination such that its reduction is suppressed. A novel interfacial behavior regarding parasitic reaction product dissolution is also identified, which is responsible for the failure of interfacial passivation. An ion-pairing electrolyte is developed based on a weakly-solvated amine molecule and strongly coordinating Mg 2+ salt. This electrolyte composition delivers long-term Mg metal anode cycling with 99.6% Coulombic efficiency for 800 cycles.

25 ENERGY STORAGE↗
DOE OSTI2021

Dual Function Solid State Battery with Self-Forming Self-Healing Electrolyte and Separator (Final Scientific/Technical Report)

Over the course of this program, we have demonstrated an improved rechargeable Li/I2 battery with reduced impedance, improved cyclability, improved Coulombic Efficiency, and the ability to “self-heal” during shorting events. Multi-year efforts have led to the development and improvements in the composition, fabrication, and preparation of the solid state electrolyte, the role of the interface, and design of appropriate test conditions. These investigations have led to significant improvements in Coulombic efficiency. By systematic development of a composite solid state electrolyte, this system is able to self-form upon charge, thus lending itself to long shelf life before use. The initial project objective was to demonstrate a solid-state rechargeable battery based on a Li-metal anode and iodine cathode with a self-forming, self-healing electrolyte and separator with high gravimetric and volumetric energy density. The final deliverables of this project build on a multi-year effort beginning with materials development and design to generate a suitable solid state electrolyte composite with demonstrated higher ionic conductivity compared to the baseline (LiI). Development in cell design and interface modification leading to the generation of rechargeable solid electrolyte cells with Coulombic efficiency improvements of ~3X over initial tests, as well as demonstration of self-healing behavior, where the cells retained their ability to continue extended cycling after shorting events. The hypothesis put forward as part of the initial concept for the project was that the cell chemistry would be self-healing. For example, if a lithium dendrite formed during charge of the cell and reached the iodine cathode, the reaction of the lithium dendrite with the iodine would consume the tip of the dendrite to form lithium iodide, more of the solid electrolyte. The formation of the solid electrolyte would allow the cell to recover and continue to function. This type of self-healing during cycling has been demonstrated and has the potential to improve on safety considerations that stem from shorting events in other Li- containing systems.

25 ENERGY STORAGE↗
DOE OSTI2020

A Lithium Metal Anode Surviving Battery Cycling Above 200 °C

Lithium (Li) metal electrode cannot endure elevated temperature (e.g., >200 °C) with the regular battery configuration due to its low melting point (180.5 °C) and high reactivity, which restricts its application in high-temperature Li metal batteries for energy storage and causes safety concerns for regular ambient-temperature Li metal batteries. Herein, this work reports a Li 5 B 4 /Li composite featuring a 3D Li 5 B 4 fibrillar framework filled with metallic Li, which maintains its initial structure at 325 °C in Ar atmosphere without leakage of the liquid Li. The capillary force caused by the porous structure of the Li 4 B 5 fibrillar framework, together with its lithiophilic surface, restricts the leakage of liquid metallic Li and enables good thermal tolerance of the Li 5 B 4 /Li composite. Thus, it can be facilely operated for rechargeable high-temperature Li metal batteries. Li 5 B 4 /Li electrodes are coupled with a garnet-type ceramic electrolyte (Li 6.5 La 3 Zr 0.5 Ta 1.5 O 12 ) to fabricate symmetric cells, which exhibit stable Li stripping/plating behaviors with low overpotential of approximate to 6 mV at 200 °C using a regular sandwich-type cell configuration. This study affords new insights into realizing a stable Li metal anode for high-temperature Li metal batteries with a simple battery configuration and high safety, which is different from traditional molten-salt Li metal batteries using a pristine metallic Li anode.

25 ENERGY STORAGE↗
DOE OSTI2021

Combined density functional theory/kinetic Monte Carlo investigation of surface morphology during cycling of Li-Cu electrodes

In this work, we employed a combined density functional theory and kinetic Monte Carlo approach in order to investigate the nanoscale behavior of lithium stripping and plating on lithium-copper nanoalloys. Density functional theory calculations were used to develop an atom-by-atom understanding of the nucleation behavior of lithium on copper surfaces with different surface morphologies. We found that nanometric pits resulted in significantly more favorable lithium deposition when compared to pristine or lightly-defective Cu surfaces, which is in agreement with previous experimental studies. We then used density functional theory and constrained ab initio molecular dynamics to develop interaction and reaction parameters for a larger-scale kinetic Monte Carlo model in order to provide insight into the stripping and plating behavior of nanostructured Li-Cu nanoalloy anodes. Substantial losses in capacity and strong indications of morphological change were observed for a wide range of Cu:Li ratios over 100 cycles. We observed a complex relationship between the nanoparticle composition and the properties of the formed solid-electrolyte interphase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Towards the Commercialization of the All-Solid-State Li-ion Battery: Local Bonding Structure and the Reversibility of Sheet-Style Si-PAN Anodes

A slurry-coated sheet-style Si-based anode is developed for use in all-solid-state Li-ion batteries. Inexpensive, mixed-conducting polyacrylonitrile (PAN) is utilized as both binder and conductive additive, enabling Si-rich electrodes (70 wt%) to attain large reversible capacities ~1,500 mAh g-1 (Si) at 1 C rates (>3 mA cm -2 ). Cross sectional analysis of a discharged all-solid-state half-cell indicates that the Si-PAN anode achieves the largest volumetric specific capacity ever reported for a Li-ion electrode (>1500 mAh cm -3 ). Ex situ Raman spectroscopic studies reveal that the anodes' reversibility is attributed to the preservation of small tetrahedrally coordinated clusters within their Si nanoparticles upon discharge. We therefore argue that careful lithiation limitations should be implemented in all Si-based Li-ion anodes to preserve this local tetrahedral atomic structure. Furthermore, the slurry-coated sheet-style Si-PAN anodes have been successfully cycled in all-solid-state full-cells against high-voltage nickel-rich NMC 811 composite cathodes to encourage future commercialization of similar sheet-style all-solid-state designs.

25 ENERGY STORAGE↗