Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “colloidal patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Materials Selection and Their Characteristics as Used in Rapid Prototyping

NASA's Marshall Space Flight Center (MSFC) conducted a program to evaluate six technologies used in Rapid Prototyping (RP) to produce investment casting patterns. In this paper, RP refers to the collective additive fabrication technologies known as Solid Free-Form Fabrication. Such technologies are being used with increasing frequency in manufacturing applications, due in part to their rapidly expanding capabilities to fabricate models from many types of materials. This study used ABS plastic, polycarbonate, TrueForm PM6, epoxy resin, paper, starch, and wax. The baseline model was a semi-complex prototype fuel pump housing, intended for use in the X-33 reusable launch vehicle. All models were shelled in a production- grade colloidal silica ceramic. Primary coats were zircon-base flour with zircon backup, while secondary coats were silica grains with a tabular alumina backup. Each model was shelled in an identical manner, using the same atmospheric conditions and drying times, as well as the same number of layers. Bake-outs and firing cycles were consistent with the leach ability of each material. Preheat and bath temperatures were also kept consistent. All molds were cast in vacuum using a hydrogen-resistant superalloy (NASA- 23) that was developed in-house. The final technical evaluation included detailed measurements of the model and the final casting, in order to determine any dimensional changes caused by different pattern materials, as well as documentation of all defects and any obvious refractory/model reactions. Prototype production costs were estimated for each method and taken into consideration during trade-off analysis.

Cooper, K.↗
DOE OSTI2020

Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices.

Wang, Xiaowei↗
DOE OSTI2022

Future directions for active matter on ordered substrates

Active matter is a term encompassing particle-based assemblies with some form of self-propulsion, including certain biological systems as well as synthetic systems such as artificial colloidal swimmers, all of which can exhibit a remarkable variety of new kinds of nonequilibrium phenomena. A wealth of non-active condensed matter systems can be described in terms of a collection of particles coupled to periodic substrates, leading to the emergence of commensurate-incommensurate effects, Mott phases, tribology effects, and pattern formation. It is natural to ask how such phases are modified when the system is active. Here we provide an overview and future directions for studying individual and collectively interacting active matter particles coupled to periodic substrates, where new types of commensuration effects, directional locking, and active phases can occur. Importantly, further directions for exploration include directional locking effects, the realization of active solitons or active defects in incommensurate phases, active Mott phases, active artificial spin ice, active doping transitions, active floating phases, active surface physics, active matter time crystals, and active tribology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Different Kinetic Reactivities of Electrons in Distinct TiO 2 Nanoparticle Trap States

Electrons added to TiO 2 and other semiconductors often occupy trap states, whose reactivity can determine the catalytic and stoichiometric chemistry of the material. We previously showed that reduced aqueous colloidal TiO 2 nanoparticles have two distinct classes of thermally equilibrated trapped electrons, termed Red/e – and Blue/e – . Presented here are parallel optical and electron paramagnetic resonance (EPR) kinetic studies of the reactivity of these electrons with solution-based oxidants. Optical stopped-flow measurements monitoring the reactions of TiO 2 /e – with substoichiometric oxidants showed a surprising pattern: an initial fast (seconds) decrease in TiO 2 /e – absorbance followed by a secondary, slow (minutes) increase in the broad TiO 2 /e – optical feature. The analysis revealed that the fast decrease is due to the preferential oxidation of the Red/e – trap states and the slow increase results from the re-equilibration of electrons from Blue/e - to Red/e - states. This kinetic model was confirmed by freeze-quench EPR measurements. Quantitative analysis of the kinetic data demonstrated that Red/e – react ~5 times faster than Blue/e – with the nitroxyl radical oxidant 4-methoxy-2,2,6,6-tetramethyl-1-piperidinyloxyl (4-MeO-TEMPO). Similar reactivity patterns were also observed in oxidations of TiO 2 /e – by O 2 , which like 4-MeO-TEMPO is a proton-coupled electron transfer (PCET) oxidant, and by the pure electron transfer (ET) oxidant potassium triiodide (KI 3 ). Furthermore, this suggests that the faster intrinsic reactivity of one trap state over another on the seconds–minutes time scale is likely a general feature of reduced TiO 2 reactivity. This differential trap-state reactivity is likely to influence the performance of TiO 2 in photochemical/electrochemical devices, and it suggests an opportunity for tuning catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of ethoxylation and lauryl alcohol on the self-assembly of sodium laurylsulfate: Significant structural and rheological transformation

Fatty alcohols are added to the surfactant solutions to modify foaming and lubrication properties, while the degree of ethoxylation is increased to improve mildness to the skin. However, it is envisioned that both parameters are capable of manipulating rheological and morphological properties. Therefore, an efficient control over the carbon chain length, amount of fatty alcohol and degree of ethoxylation could modify the surfactant self-assembly in an unprecedented way. The present work is focused on understanding the structural transformation, intermolecular interactions and rheological properties of the colloidal systems containing various amounts of lauryl alcohol (LA), and surfactant with varying degrees of ethoxylation. Additionally, combined small-angle neutron scattering (SANS), nuclear magnetic resonance (NMR) spectroscopy, rheological and morphological studies were performed to elucidate these properties. The results reveal that an increase in LA content increases the system viscosity ultimately forming a gel, and drives the assembly pattern of the surfactant from ellipsoidal micellar to lamellar via a vesicular and vesicular/lamellar mixed intermediates. Conversely, higher degrees of ethoxylation delay the onset of morphological transformation and gel formation. The interplay between hydrophobic and polar interactions coupled with hydrogen bonding interactions drive the overall rheological and morphological transformations. Therefore, fine-tuning residual chemicals can offer a novel tool for optimization of the product formulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkali triel chalcogenide nanocrystals: a molecular reactivity approach to ternary phase selectivity

Alkali-metal-based materials are promising building blocks for energy conversion and storage technologies. Here, we use a molecular reactivity-based solution-phase approach to selectively synthesize multiple phases and specific polymorphs of lithium- and sodium-containing triel chalcogenide nanocrystals, LiTrCh 2 , NaTrCh 2 , and NaTr 3 Ch 5 , where Tr = Ga and In and Ch = S, Se, and Te. Analogous to the case of binary II–VI and III–V tetrahedral semiconductors, where the two commonly isolated zinc blende and wurtzite polymorphs are separated by only 1–50 meV f.u. −1 , we find that LiTrCh 2 nanocrystals easily adopt tetragonal (chalcopyrite) and orthorhombic polymorphs separated by only 2.7–6.2 meV f.u. −1 Because of this small energy difference, soft colloidal synthesis succeeds in accessing either one of these polymorphs, depending on the specific dichalcogenide precursor used. Highly reactive diethyl diselenide favors the thermodynamically more stable tetragonal I$\bar{4}2$d phase, whereas mildly reactive diphenyl diselenide favors the kinetic, metastable orthorhombic Pna2 1 phase. Density functional theory calculations confirm the relative energies among multiple LiTrCh 2 polymorphs and also model the observed powder X-ray diffraction pattern of a new C2 NaIn 3 Te 5 phase. 7 Li, 69 Ga, and 77 Se solid-state NMR spectra are consistent with phase-pure ternary LiGaSe 2 nanocrystals. A majority of the nanocrystal compositions are visible-light emitters. This work opens the door to new Li/Na-based ternary triel chalcogenide nanostructures for energy storage and conversion applications.

Pavel, Md Riad Sarkar [Iowa State Univ., Ames, IA ↗
DOE OSTI2023

High Thermoelectric Performance in 2D Sb 2 Te 3 and Bi 2 Te 3 Nanoplate Composites Enabled by Energy Carrier Filtering and Low Thermal Conductivity

Thermoelectrics are an important class of materials with great potential in alternative energy applications. In this study, two-dimensional (2D) nanoplates of the layered chalcogenides, Sb 2 Te 3 and Bi 2 Te 3 , are synthesized and composites of the two are investigated for their thermoelectric properties. The two materials, Sb 2 Te 3 and Bi 2 Te 3 , were synthesized as hexagonal, 2D nanoplates via a colloidal polyol route. The as-synthesized Sb 2 Te 3 and Bi 2 Te 3 vary drastically from one another in their lateral and vertical dimensions as revealed by scanning electron microscopy and atomic force microscopy. The single crystalline nanoplate nature is deduced by high-resolution transmission electron microscopy and selected area electron diffraction. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The nanoplates were consolidated as an anisotropic nanostructured pellet via spark plasma sintering. Preferred orientation observed in the powder X-ray diffraction pattern and scanning electron microscopy images of the fractured pellets confirm the anisotropic structure of the nanoplates. Thermoelectric properties in the parallel and perpendicular directions were measured, revealing strong anisotropy with a significant reduction to thermal conductivity in the perpendicular direction due to increased phonon scattering at nanoplate interfaces. All compositions, except that of the 25% Bi 2 Te 3 nanoplate composite, behave as degenerate semiconductors with increasing electrical resistivity as the temperature increases. The Seebeck coefficient is also increased dramatically in the nanocomposites, the highest reaching 210 μV/K for 15% Bi 2 Te 3 . The increase in Seebeck is attributed to energy carrier filtering at the nanoplate interfaces. Overall, these enhanced thermoelectric properties lead to a drastic increase in the thermoelectric performance in the perpendicular direction, with zT ~ 1.26, for the 15% Bi 2 Te 3 nanoplate composite at 450 K.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Protein crystal growth in low gravity

The solubility and growth of the protein canavalin, and the application of the schlieren technique to study fluid flow in protein crystal growth systems were investigated. These studies have resulted in the proposal of a model to describe protein crystal growth and the preliminary plans for a long-term space flight experiment. Canavalin, which may be crystallized from a basic solution by the addition of hydrogen (H+) ions, was shown to have normal solubility characteristics over the range of temperatures (5 to 25 C) and pH (5 to 7.5) studies. The solubility data combined with growth rate data gathered from the seeded growth of canavalin crystals indicated that the growth rate limiting step is a screw dislocation mechanism. A schlieren apparatus was constructed and flow patterns were observed in Rochelle salt (sodium potassium tartrate), lysozyme, and canavalin. The critical parameters were identified as the change in density with concentration (dp/dc) and the change in index of refraction with concentration (dn/dc). Some of these values were measured for the materials listed. The data for lyrozyme showed non-linearities in plots of optical properties and density vs. concentration. In conjunction with with W. A. Tiller, a model based on colloid stability theory was proposed to describe protein crystallization. The model was used to explain observations made by ourselves and others. The results of this research has lead to the development for a preliminary design for a long-term, low-g experiment. The proposed apparatus is univeral and capable of operation under microprocessor control.

Feigelson, Robert S.↗
DOE OSTI2023

Pair distribution function analysis of nano-object assemblies

The atomic pair distribution function (aPDF) analysis technique, also known as the total scattering method, which considers both Bragg and diffuse scattering, has been used extensively to probe local atomic arrangements in crystalline and disordered materials. In contrast, there have been limited applications of the PDF in self-assembled nanomaterials, which represent a class of materials built from nanoscale objects, such as nano-colloids, micelles and proteins. As distinguished from atoms, nano-objects have polydispersity in size and shape, and such form-factor effects complicate the application of PDF analysis to nano-systems. Here, in this paper, the application of the PDF is extended to spherical nano-object assemblies and the formulae for the nano-PDF (nPDF) are derived, showing some differences from the aPDF. By numerical simulations, the properties of the nPDF (peak broadening and pattern profile) are studied systematically as a function of structural features, such as nano-object parameters (size and size polydispersity) and assembly structural features (size, shape, structure type and lattice disorder), and of data processing parameters ( q cut-off and `missing' data in ultra-small-angle regions). The nPDF analysis method is found to provide an effective route to revealing not only nanoscale but also mesoscale structural properties, for example the morphology of a nano-assembly.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Coloring Tetrahedral Semiconductors: Synthesis and Photoluminescence Enhancement of Ternary II-III 2 -VI 4 Colloidal Nanocrystals

Ternary tetrahedral II-III 2 -VI 4 semiconductors, where II is Zn or Cd, III In or Ga, and VI S, Se, or Te, are of interest in UV radiation detectors in medicine and space physics as well as CO 2 photoreduction under visible light. We synthesize colloidal II-III 2 -VI 4 semiconductor nanocrystals from readily available precursors and ascertain their ternary nature by structural and spectroscopic methods, including 77 Se solid-state NMR spectroscopy. The pyramidally shaped nanocrystals range between 2 and 12 nm and exhibit optical gaps of 2–3.9 eV. In the presence of excess anions on the particle surface, treatment with Lewis acidic, Z-type ligands results in better passivation and enhanced photoluminescence. Electronic structure calculations reveal the most stable, lowest energy polymorphs and coloring patterns. This work will pave the way toward more environmentally friendly, ternary semiconductors for optoelectronics and electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Commensurate states and pattern switching via liquid crystal skyrmions trapped in a square lattice

Using continuum based simulations we show that a rich variety of skyrmion liquid crystal states can be realized in the presence of a periodic obstacle array. As a function of the number of skyrmions per obstacle we find hexagonal, square, dimer, trimer and quadrimer ordering, where the n-mer structures are a realization of a molecular crystal state of skyrmions. As a function of external field and obstacle radius we show that there are transitions between the different crystalline states as well as mixed and disordered structures. Here, we discuss how these states are related to commensurate effects seen in other systems, such as vortices in type-II superconductors and colloids interacting with two dimensional substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic insights into the nucleation and growth of platinum on palladium nanocrystals

Abstract Despite the large number of reports on colloidal nanocrystals, very little is known about the mechanistic details in terms of nucleation and growth at the atomistic level. Taking bimetallic core-shell nanocrystals as an example, here we integrate in situ liquid-cell transmission electron microscopy with first-principles calculations to shed light on the atomistic details involved in the nucleation and growth of Pt on Pd cubic seeds. We elucidate the roles played by key synthesis parameters, including capping agent and precursor concentration, in controlling the nucleation site, diffusion path, and growth pattern of the Pt atoms. When the faces of a cubic seed are capped by Br − , Pt atoms preferentially nucleate from corners and then diffuse to edges and faces for the creation of a uniform shell. The diffusion does not occur until the Pt deposited at the corner has reached a threshold thickness. At a high concentration of the precursor, self-nucleation takes place and the Pt clusters then randomly attach to the surface of a seed for the formation of a non-uniform shell. These atomistic insights offer a general guideline for the rational synthesis of nanocrystals with diverse compositions, structures, shapes, and related properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Curvature-controlled geometrical lensing behavior in self-propelled colloidal particle systems

In many biological systems, the curvature of the surfaces cells live on influences their collective properties. Curvature should likewise influence the behavior of active colloidal particles. We show using molecular simulation of self-propelled active particles on surfaces of Gaussian curvature (both positive and negative) how curvature sign and magnitude can alter the system's collective behavior. Curvature acts as a geometrical lens and shifts the critical density of motility-induced phase separation (MIPS) to lower values for positive curvature and higher values for negative curvature, which we explain theoretically by the nature of parallel lines in spherical and hyperbolic space. Curvature also fluidizes dense MIPS clusters due to the emergence of defect patterns disrupting the crystalline order inside the clusters. Using our findings, we engineer three confining surfaces that strategically combine regions of different curvature to produce a host of novel dynamical behaviors, including cyclic MIPS on spherocylinders, directionally biased cyclic MIPS on spherocones, and position dependent cluster fluctuations on metaballs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reconfigurable droplet networks

Droplet networks stabilized by lipid interfacial bilayers or colloidal particles have been extensively investigated in recent years and are of great interest for compartmentalized reactions and biological functions. However, current design strategies are disadvantaged by complex preparations and limited droplet size. Here, by using the assembly and jamming of cucurbit[8]uril surfactants at the oil-water interface, we show a novel means of preparing droplet networks that are multi-responsive, reconfigurable, and internally connected over macroscopic distances. Openings between the droplets enable the exchange of matter, affording a platform for chemical reactions and material synthesis. Our work requires only a manual compression to construct complex patterns of droplet networks, underscoring the simplicity of this strategy and the range of potential applications.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Biogeochemical Activity of Siderophilic Cyanobacteria: Implications for Paleobiogeochemistry

Understanding the patterns of iron oxidation by cyanobacteria (CB) has tremendous importance for paleobiogeochemistry, since cyanobacteria are presumed to have been involved in the global oxidation of ferrous iron during the Precambrian (Cloud, 1973). B.K. Pierson (1999, 2000) first proposed to study iron deposition in iron-depositing hot springs (ID HS) as a model for Precambrian Fe(2+) oxidation. However, neither the iron-dependent physiology of individual species of CB inhabiting iron-depositing hot springs nor their interactions with minerals enriched with iron have been examined thoroughly. Such study could shed light on ancient iron turnover. Cyanobacterial species isolated from ID HS demonstrate elevated tolerance to colloidal Fe(3+) (= 1 mM), while a concentration of 0.4 mM proved toxic for mesophilic Synechocystis PCC 6803. Isolates from ID HS require 0.4-0.6 mM Fe3+ for maximal growth while the iron requirement for Synechocystis is approximately one order of magnitude lower. We have also demonstrated that thick polysaccharide sheaths around cells of CB isolated from ID HS serve as repositories for precipitated iron. The growth of the mesophilic cyanobacteria Phromidium aa in iron-saturated (0.6 mM) DH medium did not lead to iron precipitation on its filament surfaces. However, a 14.3 fil.2 culture, isolated from an ID HS and incubated under the same conditions, was covered with dense layer of precipitated iron. Our results, taken together with Pierson s data concerning the ability of Fe2+ to stimulate photosynthesis in natural CB mats in ID HS, suggest that CB inhabiting ID HS may constitute a new group of the extremophiles - siderophilic CB. Our recent experiments have revealed for the first time that CB isolates from ID HS are also capable of biodeterioration - the etching of minerals, in particular glasses enriched with Fe, Al, Ti, O, and Si. Thus, Precambrian siderophilic cyanobacteria and their predecessors could have been involved not only in iron deposition but also in the global release of elements. The ability of siderophilic CB to participate in iron turnover make them appropriate candidates for biotechnological processes.

Brown, Igor I.↗
DOE OSTI2021

The diversity of three-dimensional photonic crystals

Many butterflies, birds, beetles, and chameleons owe their spectacular colors to the microscopic patterns within their wings, feathers, or skin. When these patterns, or photonic crystals, result in the omnidirectional reflection of commensurate wavelengths of light, it is due to a complete photonic band gap (PBG). The number of natural crystal structures known to have a PBG is relatively small, and those within the even smaller subset of notoriety, including diamond and inverse opal, have proven difficult to synthesize. Here, we report more than 150,000 photonic band calculations for thousands of natural crystal templates from which we predict 351 photonic crystal templates – including nearly 300 previously-unreported structures – that can potentially be realized for a multitude of applications and length scales, including several in the visible range via colloidal self-assembly. With this large variety of 3D photonic crystals, we also revisit and discuss oft-used primary design heuristics for PBG materials.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Design of nematic liquid crystals to control microscale dynamics

The dynamics of small particles, both living such as swimming bacteria and inanimate, such as colloidal spheres, has fascinated scientists for centuries. If one could learn how to control and streamline their chaotic motion, that would open technological opportunities in the transformation of stored or environmental energy into systematic motion, with applications in micro-robotics, transport of matter, guided morphogenesis. This review presents an approach to command microscale dynamics by replacing an isotropic medium with a liquid crystal. Orientational order and associated properties, such as elasticity, surface anchoring, and bulk anisotropy, enable new dynamic effects, ranging from the appearance and propagation of particle-like solitary waves to self-locomotion of an active droplet. By using photoalignment, the liquid crystal can be patterned into predesigned structures. In the presence of the electric field, these patterns enable the transport of solid and fluid particles through nonlinear electrokinetics rooted in anisotropy of conductivity and permittivity. Director patterns command the dynamics of swimming bacteria, guiding their trajectories, polarity of swimming, and distribution in space. This guidance is of a higher level of complexity than a simple following of the director by rod-like microorganisms. Namely, the director gradients mediate hydrodynamic interactions of bacteria to produce an active force and collective polar modes of swimming. The patterned director could also be engraved in a liquid crystal elastomer. When an elastomer coating is activated by heat or light, these patterns produce a deterministic surface topography. The director gradients define an activation force that shapes the elastomer in a manner similar to the active stresses triggering flows in active nematics. Finally, the patterned elastomer substrates could be used to define the orientation of cells in living tissues. The liquid-crystal guidance holds a major promise in achieving the goal of commanding microscale active flows.

36 MATERIALS SCIENCE↗