Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud liquid water content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Profiles of Radiative Fluxes at ENA

Profiles of radiative fluxes observed at the Atmospheric Radiation Measurement (ARM)’s Eastern North Atlantic (ENA) observatory along with the ancillary measurements are reported. The below-cloud drizzle properties were derived by combining the data from the ceilometer and Ka-band ARM Zenith Radar (KAZR) following the technique explained by Ghate et al. (2021 JAMC). The cloud and drizzle water path values were derived from the brightness temperatures reported by the microwave radiometer following the technique of Cadeddu et al. (2020 AMT). The cloud water path was then scaled to the KAZR-reported radar reflectivity to calculate profiles of liquid water content (LWC). Following the analysis from Ghate et al. (2023 JGR), cloud droplet effective radius was calculated using the number concentration value of 100 cm-3. The cloud properties, along with the thermodynamic properties, served as an input to the Rapid Radiative Transfer Model (RRTM) to yield profiles of radiative fluxes at a 1-minute temporal and 50-m vertical resolution. The fluxes were then averaged to hourly temporal resolution for analysis. In Mitra et al. (2025 JClim), the calculated profiles were compared against those derived from the satellite measurements (SYN1deg). Flux profiles from the SYN1deg and the thermodynamic and cloud properties used for deriving them are also reported here. Both all-sky and clear-sky radiative flux profiles were calculated. Due to the large data volume, the surface and top-of-atmosphere (TOA) radiative fluxes for the six-year period, and the hourly profiles of the radiative fluxes for January 2018, are submitted here. Full profiles of radiative fluxes calculated from the thermodynamic and cloud properties measured at the ENA site at 1-minute temporal and 50-m vertical resolution for a six-year period are available from the authors. Six files here correspond to the following data: 1_ENARAD_CERES_with_cld_amount_timeseries.nc: Time-series of hourly values of RRTM-simulated values of upwelling and downwelling fluxes at the surface and TOA, observed boundary-layer cloud fractions, and upwelling and downwelling fluxes from the SYN1deg from July 2015 to January 2022. 2_CERES_2018_at_CERES_levels.nc: SYN1deg radiative fluxes at six levels for the year 2018. 3_ENARad_2018_at_CERES_levels.nc: RRTM calculated fluxes at the SYN1deg vertical levels for the year 2018. 4_ENARad_rrtminputs_hourly_201801.nc: Thermodynamic and cloud properties used as an input to the RRTM for January 2018. 5_CERES_inputs_hourly_201801.nc: Thermodynamic and cloud properties utilized by SYN1deg algorithm for January 2018. 6_ENARAD_hourly_201801.nc: Full profiles of hourly averaged radiative fluxes from the RRTM simulations for January 2018.

Atmosphere↗
DOE OSTI2020

Analytical Investigation of the Role of Lateral Mixing in the Evolution of Nonprecipitating Cumulus. Part II: Dissolving Stage

A minimalistic analytical model allowing analysis of the dissolving stage of nonprecipitating convective clouds is proposed. The model takes into account two mechanisms: turbulent mixing with a dry environment and cloud volume settling. The temporal changes in the spatial structure of a cloud and in its immediate environment in the course of cloud dissolving are analyzed. The comparison of the effects of a temperature increase in the course of cloud descent and mixing with dry surrounding air shows that the descent is a dominating factor determining a decrease in the liquid water content (LWC), while mixing has a stronger effect on the cloud shape. Narrowing/broadening of clouds due to lateral mixing with dry air during cloud dissolving is determined by the potential evaporation parameter proportional to the ratio of the saturation deficit in the cloud environment to LWC. An equation for cloud dissolving time is obtained. After a cloud totally dissolves, it leaves behind an area with humidity exceeding that of the environment. The main parameter determining the dissolving time is the downdraft velocity. It should exceed 50 cm s -1 in order to provide reasonable dissolving time. The turbulent intensity, LWC, and humidity of the environment air also have an impact on dissolving time: the lower the LWC and the humidity of environment air, the faster cloud dissolving is. The simple solution presented in this paper can be useful for evaluation of cloud characteristics at the dissolving stage and can be included in procedures of parameterization of cloud cover formed by nonprecipitating or slightly precipitating cumulus clouds (Cu). Values of the environment humidity and temperature, LWC at cloud top, cloud width, vertical velocity of downdraft, and the turbulent coefficient should be parameters of this parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Designing a Convection‐Cloud Chamber for Collision‐Coalescence Using Large‐Eddy Simulation With Bin Microphysics

Abstract Collisional growth of cloud droplets is an essential yet uncertain process for drizzle and precipitation formation. To improve the quantitative understanding of this key component of cloud‐aerosol‐turbulence interactions, observational studies of collision‐coalescence in a controlled laboratory environment are needed. In an existing convection‐cloud chamber (the Pi Chamber), collisional growth is limited by low liquid water content and short droplet residence times. In this work, we use numerical simulations to explore various configurations of a convection‐cloud chamber that may intensify collision‐coalescence. We employ a large‐eddy simulation (LES) model with a size‐resolved (bin) cloud microphysics scheme to explore how cloud properties and the intensity of collision‐coalescence are affected by the chamber size and aspect ratio, surface roughness, side‐wall wetness, side‐wall temperature arrangement, and aerosol injection rate. Simulations without condensation and evaporation within the domain are first performed to explore the turbulence dynamics and wall fluxes. The LES wall fluxes are used to modify the Scalar Flux‐budget Model, which is then applied to demonstrate the need for non‐uniform side‐wall temperature (two side walls as warm as the bottom and the two others as cold as the top) to maintain high supersaturation in a tall chamber. The results of LES with full cloud microphysics reveal that collision‐coalescence is greatly enhanced by employing a taller chamber with saturated side walls, non‐uniform side‐wall temperature, and rough surfaces. For the conditions explored, although lowering the aerosol injection rate broadens the droplet size distribution, favoring collision‐coalescence, the reduced droplet number concentration decreases the frequency of collisions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

ShupeTurner cloud microphysics

This product is the ShupeTurner cloud microphysics product derived for the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in the central Arctic. The product includes time-height derivations of the cloud type (phase type) and the condensed water content and characteristic effective particle size for liquid and ice hydrometeor populations. Additionally, it includes the vertical integral of the condensed water content for liquid and ice, i.e., the liquid water path and ice water path. These are derived using a combination of sensors, including: cloud radar, depolarization lidar, microwave radiometer, ceilometer, and radiosondes. During MOSAiC, these sensors were installed and operated onboard the Polarstern icebreaker while within the Arctic sea ice. Most data were obtained while Polarstern was moored to the MOSAiC sea ice floe, passively drifting through the Arctic. However, the data from 16 May 2020 - 17 June 2020 and 31 July 2020 - 21 August 2020 were obtained while Polarstern was underway transiting through the sea ice during relocations of the expedition. General details of the retrieval algorithm, its application, and uncertainties are provided in Shupe et al. (2015), with the cloud classification being described in more detail in Shupe (2007). General details about the MOSAiC expedition including instruments, locations, and meteorological context is provided in Shupe et al. (2022).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Analytical advances to study the air – water interfacial chemistry in the atmosphere

Formation of aqueous secondary organic aerosol (aqSOA) at the air – liquid interface recently has attracted a lot of attention in atmospheric chemistry. The discrepancies in mass distributions, aerosol oxidative capacity, liquid water content, hygroscopic growth of aerosols, and formation of clouds and fogs suggest that interfacial chemistry play a more important role than previously deemed. However, detailed mechanisms at the air–water interface remain unclear owing to the lack of comprehensive understanding that underpins complicated interfacial phenomena, which are not easily measurable from field campaigns, laboratory measurements, or computational simulations. Here, this review highlights relevant and recent technical advancement employed to study aqSOA encompassing spectroscopy and mass spectrometry. The current knowledge on the aqSOA processes is digested with an emphasis on recent research of interfacial aqSOA formation including laboratory studies and model simulations. Finally, future directions of the interfacial chemistry are recommended for field and laboratory studies as well as theoretical efforts to resolve interfacial challenges in atmospheric chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into the relation between vertical cloud structure and dynamics of three polar lows: Observations from COMBLE

The vertical structure of three polar lows is described using profiling radar, lidar, and passive remote sensors deployed at a coastal site in northern Norway. The data were collected as part of the Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE). These data are examined in the context of satellite imagery, operational weather radar reflectivity imagery, and output from the AROME-Arctic model. A comparison to satellite images shows that AROME-Arctic captured the polar lows well. All three polar lows form in marine cold-air outbreaks and are surrounded by open-cellular convection typical of such outbreaks. Two of the lows form in a forward shear environment, and one under reverse shear. Initially, the three polar lows are comma-shaped; two of them transition to be more spirali-form at their mature stage and have mostly cloud-free warm cores. The warm cores are the result of a warm-seclusion process. All three lows have stratiform precipitation bands, marked by little cloud liquid water, and rather high surface precipitation rate. The vertical drafts and turbulence in these stratiform clouds are generally weak. In conclusion, all three lows also have convective clouds, which have stronger vertical drafts, stronger turbulence, and pockets of high liquid water content.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The FastEddy® Resident-GPU Accelerated Large-Eddy Simulation Framework: Moist Dynamics Extension, Validation and Sensitivities of Modeling Non-Precipitating Shallow Cumulus Clouds

Herein we describe the moist dynamics formulation implemented within the graphics processing unit-resident large-eddy simulation FastEddy® model, which includes a simple saturation adjustment scheme for condensation and evaporation processes. Two LES model intercomparison exercises for non-precipitating shallow cumulus clouds are simulated in order to validate this model extension, including a static forcing and a time-dependent forcing case. Overall, we find our dynamical, thermodynamical and microphysical quantities, along with turbulence variability and fluxes, to be commensurate with the corresponding model intercomparison results. In addition, sensitivities to specific model settings are investigated. Among these settings, it is shown that boundary layer and cloud layer structure and characteristics are sensitive to use of higher-order advection schemes impacting the vertical distribution of cloud content and associated turbulence statistics. Increasing the timescale of the saturation scheme leads to enhanced liquid water presence and decreases vertical velocity variance within the cloud deck. In some cases, these sensitivities agree with the model-to-model variability reported in the intercomparison exercises, highlighting the important role of specific model implementation choices in the context of shallow cumulus convection simulations. These analyses and findings also provide the basis for future extensions and applications of FastEddy® for modeling moist convection and precipitation scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Partition between supercooled liquid droplets and ice crystals in mixed-phase clouds based on airborne in situ observations

Abstract. The onset of ice nucleation in mixed-phase clouds determines the lifetime and microphysical properties of ice clouds. In this work, we develop a novel method that differentiates between various phases of mixed-phase clouds, such as clouds dominated by pure liquid or pure ice segments, compared with those having ice crystals surrounded by supercooled liquid water droplets or vice versa. Using this method, we examine the relationship between the macrophysical and microphysical properties of Southern Ocean mixed-phase clouds at −40 to 0 °C (e.g. stratiform and cumuliform clouds) based on the in situ aircraft-based observations during the US National Science Foundation Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) flight campaign. The results show that the exchange between supercooled liquid water and ice crystals from a macrophysical perspective, represented by the increasing spatial ratio of regions containing ice crystals relative to the total in-cloud region (defined as ice spatial ratio), is positively correlated with the phase exchange from a microphysical perspective, represented by the increasing ice water content (IWC), decreasing liquid water content (LWC), increasing ice mass fraction, and increasing ice particle number fraction (IPNF). The mass exchange between liquid and ice becomes more significant during phase 3 when pure ice cloud regions (ICRs) start to appear. Occurrence frequencies of cloud thermodynamic phases show a significant phase change from liquid to ice at a similar temperature (i.e. −17.5 °C) among three types of definitions of mixed-phase clouds based on ice spatial ratio, ice mass fraction, or IPNF. Aerosol indirect effects are quantified for different phases using number concentrations of aerosols greater than 100 or 500 nm (N>100 and N>500, respectively). N>500 shows stronger positive correlations with ice spatial ratios compared with N>100. This result indicates that larger aerosols potentially contain ice-nucleating particles (INPs), which facilitate the formation of ice crystals in mixed-phase clouds. The impact of N>500 is also more significant in phase 2 when ice crystals just start to appear in the mixed phase compared with phase 3 when pure ICRs have formed, possibly due to the competing aerosol indirect effects on primary and secondary ice production in phase 3. The thermodynamic and dynamic conditions are quantified for each phase. The results show stronger in-cloud turbulence and higher updraughts in phases 2 and 3 when liquid and ice coexist compared with pure liquid or ice (phases 1 and 4, respectively). The highest updraughts and turbulence are seen in phase 3 when supercooled liquid droplets are surrounded by ice crystals. These results indicate both updraughts and turbulence support the maintenance of supercooled liquid water amongst ice crystals. Overall, these results illustrate the varying effects of aerosols, thermodynamics, and dynamics through various stages of mixed-phase cloud evolution based on this new method that categorizes cloud phases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Cloud microphysical structure analysis based on high-resolution insitu measurements

This study investigates the microphysical parameters and shapes of droplet size distributions (DSDs) along three aircraft traverses of developing convective clouds during Cloud Aerosol Interactions and Precipitation Enhancement Experiment (CAIPEEX) Phase III 2015 at a sampling frequency of 25 Hz. The droplet number concentration (Nc, cm -3 ), and liquid water content (LWC, g m -3 ) present steep gradients within zones of a few tens of meters near the cloud edges and relatively gentle gradients in the strong updraft zones. Sometimes, the horizontal LWC distribution resembles a trapezoidal shape with steep LWC and Nc gradients near the cloud edges. The LWC maximums (LWC max ) are lower than the adiabatic LWCs, but the high adiabatic fractions in the cloud core indicate low dilution. High LWC/LWC max , largest droplets, and narrow and similarly shaped DSDs are found in the regions of high updrafts. Zones of low LWC/LWC max are found close to the cloud edges, where DSDs are highly diverse, containing both large and small droplets. Finally, we analyze the mixing diagrams. Significant in-phase turbulent fluctuations in LWC and N c were found. The effective radii change slightly across cloud updraft zones but decrease at the zone of low LWC/LWC max ratio close to cloud edges. The spectra of LWC and N c obey Kolmogorov -5/3 turbulence law. The radii of the correlation of LWC and N c in updraft zones are of several tens of meters. Filaments up to 120–175 m in size are also noticed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Ice and Supercooled Liquid Water Distributions over the Southern Ocean based on In Situ Observations and Climate Model Simulations

Three climate models are evaluated using in situ airborne observations from the Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) campaign. The evaluation targets cloud phases, microphysical properties, thermodynamic conditions, and aerosol indirect effects from –40°C to 0°C. Compared with 580-s averaged observations (i.e., 100 km horizontal scale), the Community Atmosphere Model version 6 (CAM6) shows the most similar result for cloud phase frequency distribution and allows more liquid-containing clouds below –10°C compared with its predecessor—CAM5. The Energy Exascale Earth System Model (E3SM) underestimates (overestimates) ice phase frequencies below (above) –20°C. CAM6 and E3SM show liquid and ice water contents (i.e., LWC and IWC) similar to observations from –25°C to 0°C, but higher LWC and lower IWC than observations at lower temperatures. Simulated in-cloud RH shows higher minimum values than observations, possibly restricting ice growth during sedimentation. As number concentrations of aerosols larger than 500 nm (Na 500 ) increase, observations show increases of LWC, IWC, liquid, and ice number concentrations (N liq , N ice ). Number concentrations of aerosols larger than 100 nm (Na 100 ) only show positive correlations with LWC and N liq . From –20°C to 0°C, higher aerosol number concentrations are correlated with lower glaciation ratio and higher cloud fraction. From –40°C to –20°C, large aerosols show positive correlations with glaciation ratio. CAM6 shows small increases of LWC and N liq with Na 500 and Na 100 . E3SM shows small increases of N ice with Na 500 . Altogether, CAM6 and E3SM underestimate aerosol indirect effects on ice crystals and supercooled liquid droplets over the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Using ARM Data to Retrieve Entrainment Rates in Stratocumulus Cloud Systems (Final Report)

A stratocumulus-topped boundary layer (STBL) is a shallow convecting layer in which both the updraft and the downdraft branches of the convective circulation are saturated (cloudy) in the upper part of the boundary layer. The convective circulation is vigorous, yet the cloud-top entrainment velocity, $w_e$, is small and difficult to measure. Differences between currently used parameterizations of $w_e$ in GCMs can lead to STBLs that differ by as much as a factor of two in climatologically important properties such as liquid water path and boundary layer depth. We have developed a new method to retrieve entrainment rates in STBLs which uses vertical velocity retrievals from surface-based cloud radar, in conjunction with other surface-based measurements. These new estimates will allow a more comprehensive evaluation of parameterizations of entrainment rate for STBLs. The new method will also provide ground-based estimates of entrainment in STBLs over long time periods. We use retrievals of vertical velocity and liquid water content profiles to estimate the turbulent liquid water flux, which is then used in combination with observed cloud-top jumps of temperature, water vapor, and calculated radiative flux profiles to estimate the entrainment rate. We present results for three days for which observational data was not significantly contaminated by drizzle. The resulting average entrainment rates are 0.58 cm/s, 1.51 cm/s, and 0.31 cm/s.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Broadband and filter radiometers at Ross Island, Antarctica: detection of cloud ice phase versus liquid water influences on shortwave and longwave radiation

Abstract. Surface radiometer data from Ross Island, Antarctica, collected during the austral summer 2015–2016 by the US Department of Energy Atmospheric Radiation Measurement (ARM) program West Antarctic Radiation Experiment (AWARE), are used to evaluate how shortwave and longwave irradiance respond to changing cloud properties as governed by contrasting meteorological regimes. Shortwave atmospheric transmittance is derived from pyranometer measurements, and cloud conservative-scattering optical depth is derived from filter radiometer measurements at 870 nm. With onshore flow associated with marine air masses, clouds contain mostly liquid water. With southerly flow over the Transantarctic Mountains, orographic forcing induces substantial cloud ice water content. These ice and mixed-phase clouds attenuate more surface shortwave irradiance than the maritime-influenced clouds and also emit less longwave irradiance due to colder cloud base temperature. These detected irradiance changes are in a range that can mean onset or inhibition of surface melt over ice shelves. This study demonstrates how basic and relatively low-cost broadband and filter radiometers can be used to detect subtle climatological influences of contrasting cloud microphysical properties at very remote locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Vortex Structure of Head Bubble in Convective Cloud Starting Plume

Abstract A developing cumulus cloud (Cu) was modeled, and dynamic, thermodynamic, and microphysical properties of an ascending head bubble reproducing the upper part of a developing Cu were investigated. The data for analysis are taken from 10-m-resolution LES of trade wind Cu under BOMEX conditions. The detection of a rising bubble is carried out using wavelet filtering of the velocity fields and microphysical fields, while a low-frequency signal of the filtering is associated with the convective-scale structure of cloud. We substantiate and discuss the representation of the bubble as a vortex ring, and estimate the parameters of this vortex ring. The simplest Hill’s vortex was chosen as a model of a vortex ring inside cloud. Analytical approximations of the radial profiles of the vertical velocity and of conservative quantities (such as total water mixing ratio and liquid water potential temperature inside and outside the bubble) are obtained. The spatial structure of these quantities is investigated using analytical expressions. Analytical models for spatial distributions of liquid water content (LWC) and adiabatic fraction (AF) are also designed and analyzed. The results demonstrate the existence of a cloud core with high values of LWC and AF up to the height of 1800 m. The horizontally averaged value of the adiabatic fraction, calculated analytically using the Hill’s vortex concept, is evaluated as 0.39, which is the typical AF value in the upper parts of such Cu. The vertical profiles of different important quantities characterizing cloud structure are presented. The analysis performed in this study allows us to conclude that a rising vortex ring plays the dominating role in formation of the thermodynamic and microphysical structure of developing Cu. Significance Statement 1) Dynamic and thermodynamic fields of a developing cumulus cloud simulated by high-resolution LES with spectral bin microphysics are separated into convective and turbulent components by means of the wavelet technique. 2) The analysis of convective component of the cloud revealed the existence of a vortex ring at the developing stage of the cloud and evaluate its parameters. 3) The analysis performed in this study allows us to conclude that a rising vortex ring plays the important role in formation of the thermodynamic and microphysical structure of developing Cu. 4) The study provides a novel insight into the cloud–environment interaction. 5) The approximating equations describing the vortex ring can be usefully applied for developing new schemes of convective parameterization.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

EPCAPE-Dalhousie Field Campaign Report

This project supported the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE), which aimed to characterize the extent, radiative properties, aerosol interactions, and precipitation of stratocumulus clouds in the Eastern Pacific coastal region of La Jolla, California. Given the frequent anthropogenic aerosols emitted into this region, characterization of this important coastal cloud region and the aerosol impact on the cloud characteristics will improve the understanding of aerosol indirect effects and its representation in global climate models. This specific project deployed the fog droplet monitor (FM-120, Droplet Measurement Technologies) at the Scripps Institution of Oceanography’s Mt. Soledad site from 16 February 2023 to 15 February 2024. This instrument measured droplet number size spectra between 2 and 50 microns, from which droplet number concentration, liquid water content, and effective diameter were calculated. These measurements will be used to characterize the seasonal variability of clouds at Mt. Soledad and investigate differences in cloud properties under regional polluted and clean marine conditions. The collected data will soon be posted as part of the digital collection for EPCAPE data hosted by the University of California, San Diego (Russell et al. 2023).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The impact of cloud microphysics and ice nucleation on Southern Ocean clouds assessed with single-column modeling and instrument simulators

Abstract. Supercooled liquid clouds are common at higher latitudes (especially over the Southern Ocean) and are critical for constraining climate projections. We take advantage of the Macquarie Island Cloud and Radiation Experiment (MICRE) to perform an analysis of observed and simulated cloud processes over the Southern Ocean in a region and season dominated by supercooled liquid clouds. Using a single-column version of the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS), we compare two different cloud microphysical schemes to ground-based observations of cloud, precipitation, and radiation over a 2.5-month period (1 January–17 March 2017). Both schemes are able to reproduce aspects of the cloud and radiation observations during MICRE to within the uncertainty of the data when the thermodynamic profile is prescribed with relaxation. There are differences in water mass and representation of reflectivity between the schemes. A sensitivity study of the cloud microphysics schemes, one a bulk one-moment scheme and the other a two-moment scheme with prediction of mass and number, indicates that several key processes create differences between the schemes. Surface radiative fluxes and total water path are highly sensitive to the formation and fall speed of precipitation. The prediction of hydrometeor number with the two-moment scheme yields a better comparison with observed reflectivity and radiative fluxes, despite predicting higher liquid water contents than observed. With the two-moment scheme, we are also able to test the sensitivity of the results to the input of liquid cloud condensation nuclei (CCN) and ice nuclei (IN). The cloud properties and resulting radiative effects are found to be sensitive to the CCN and IN concentrations. More CCN and IN increase liquid and ice water paths, respectively. Thus, both the dynamic environment and aerosols, integrated through the cloud microphysics, are important for properly representing Southern Ocean cloud radiative effects.

58 GEOSCIENCES↗
DOE OSTI2023

ARM Aerial Facility (AAF) - Unmanned Aircraft Systems, Cloud Droplet Probe

The Cloud Droplet Probe (CDP) is designed to measure cloud droplet size distribution from 2 µm to 50 µm. The CDP and an appropriate data system can also calculate various other parameters including particle concentrations, effective diameter (ED), Median Volume Diameter (MVD), and Liquid Water Content (LWC).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A numerical simulation of CCN impacts on weather modification efficiency

Aerosols affect development of clouds and precipitation by serving as cloud condensation nuclei (CCN) and ice nuclei (IN). Considering the dramatically changing ambient aerosol concentration, it is important to examine the potential “side effect” of aerosol pollution on precipitation enhancement by weather modification. In this study, the cloud seeding was performed on a precipitation event in Beijing in the summer of 2008, which is simulated by the NSSL two-moment cloud scheme of the Weather Research and Forecasting (WRF) model. Sensitivity tests were conducted by modifying the ambient aerosol concentration and the ice crystal seeding amount to investigate the cloud seeding efficacy in different CCN concentration scenarios. There was a slight difference in the precipitation distribution between the simulations with two ambient CCN concentrations: the northern precipitation center in polluted scenario was weaker and the southern center was stronger. Compared with normal CCN scenario, the cloud liquid water mass and ice crystal mass in the severe pollution scenario is larger, and the total contents of snow and graupel were not sensitive to the CCN concentration. With the same amount of man-made ice crystals seeding, the precipitation enhancement was quite different under different CCN conditions. The higher the CCN concentration usually leads to stronger precipitation suppression. As CCN concentration increase, the deposition growth of snow, auto-conversion and accretion of ice crystals to snow were weakened, as well as the conversion of melting snow and graupel into rainwater.

54 ENVIRONMENTAL SCIENCES↗