Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud base height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Cloud properties derived from two lidars over the ARM SGP site

[1] Active remote sensors such as lidars or radars can be used with other data to quantify the cloud properties at regional scale and at global scale (Dupont et al., 2009). Relative to radar, lidar remote sensing is sensitive to very thin and high clouds but has a significant limitation due to signal attenuation in the ability to precisely quantify the properties of clouds with a 20 cloud optical thickness larger than 3. In this study, 10-years of backscatter lidar signal data are analysed by a unique algorithm called STRucture of ATmosphere (STRAT, Morille et al., 2007). We apply the STRAT algorithm to data from both the collocated Micropulse lidar (MPL) and a Raman lidar (RL) at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site between 1998 and 2009. Raw backscatter lidar signal is processed and 25 corrections for detector deadtime, afterpulse, and overlap are applied. (Campbell et al.) The cloud properties for all levels of clouds are derived and distributions of cloud base height (CBH), top height (CTH), physical cloud thickness (CT), and optical thickness (COT) from local statistics are compared. The goal of this study is (1) to establish a climatology of macrophysical and optical properties for all levels of clouds observed over the ARM SGP site 30 and (2) to estimate the discrepancies induced by the two remote sensing systems (pulse energy, sampling, resolution, etc.). Our first results tend to show that the MPLs, which are the primary ARM lidars, have a distinctly limited range where all of these cloud properties are detectable, especially cloud top and cloud thickness, but even actual cloud base especially during summer daytime period. According to the comparisons between RL and MPL, almost 50% of situations show a signal to noise ratio too low (smaller than 3) for the MPL in order to detect clouds higher than 7km during daytime period in summer. Consequently, the MPLderived annual cycle of cirrus cloud base (top) altitude is biased low, especially for daylight periods, compared with those derived from the RL data, which detects 5 cloud base ranging from 7.5 km in winter to 9.5 km in summer (and tops ranging from 8.6 to 10.5 km). The optically thickest cirrus clouds (COT>0.3) reach 50% of the total population for the Raman lidar and only 20% for the Micropulse lidar due to the difference of pulse energy and the effect of solar irradiance contamination. A complementary study using the cloud fraction 10 derived from the Micropulse lidar for clouds below 5 km and from the Raman lidar for cloud above 5 km allows for better estimation of the total cloud fraction between the ground and the top of the atmosphere. This study presents the diurnal cycle of cloud fraction for each season in comparisons with the Long et al. (2006) cloud fraction calculation derived from radiative flux analysis.

54 ENVIRONMENTAL SCIENCES↗

Assessing the mechanisms governing the daytime evolution of marine stratocumulus using large‐eddy simulation

Large‐eddy simulation (LES) output for a case of thin stratocumulus off the coast of California is examined in a mixed‐layer analysis framework to identify the specific mechanisms responsible for governing the evolution of the cloud system. An equation for cloud‐base height tendency isolates the individual cloud‐modulating mechanisms that control the evolution of boundary‐layer liquid‐water static energy ( S l ) and total water mixing ratio ( q T ). With a suitable spin‐up procedure, the control simulation performs admirably compared with observed estimates of liquid water content, vertical velocity variance, and radiative fluxes sampled during an aircraft field campaign. Investigation of the cloud response to various environmental forcing scenarios was addressed through a suite of sensitivity simulations, including variations in subsidence velocity, surface fluxes, wind shear near the inversion, and radiative forcing. In the control simulation, rising cloud‐base tendencies are associated with entrainment warming/drying and short‐wave absorption, whereas lowering cloud‐base tendencies are driven by long‐wave cooling. Even in the presence of substantial afternoon solar heating, entrainment fluxes remained active. The thin cloud demonstrated unexpected resiliency, with mixed‐layer analysis indicating that, as the short‐wave flux decreases later in the afternoon, the relative contribution of long‐wave cooling often becomes large enough to offset entrainment warming/drying and result in a reversal of cloud‐base tendency. The evolution of cloud‐base tendency is found to be insensitive to the net radiative flux divergence for most of the simulations (liquid water path ranging from ~10–50 g/m 2 ). Error analysis in comparison with LES S l and q T budgets suggests that our method of entrainment flux calculation could be improved by a more complete understanding of entrainment‐layer physics.

McMichael, Lucas A.↗

Ceilometer Instrument Handbook

The Vaisala Laser Ceilometer (CEIL) is a self-contained, ground-based, active, remote-sensing device designed to measure cloud-base height, vertical visibility, and potential backscatter signals by aerosols. It detects up to three cloud layers simultaneously. Model CL31 has a maximum vertical range of 7700 meters (m). The laser ceilometer transmits near-infrared pulses of light, and the receiver detects the light scattered back by clouds and precipitation.

47 OTHER INSTRUMENTATION↗

Comparison of cloud boundaries measured with 8.6 mm radar and 10.6 micrometer lidar

One of the most basic cloud properties is location; the height of cloud base and the height of cloud top. The glossary of meteorology defines cloud base (top) as follows: 'For a given cloud or cloud layer, that lowest (highest) level in the atmosphere at which the air contains a perceptible quantity of cloud particles.' Our studies show that for a 8.66 mm radar, and a 10.6 micrometer lidar, the level at which cloud hydrometers become 'perceptible' can vary significantly as a function of the different wavelengths, powers, beamwidths and sampling rates of the two remote sensors.

Uttal, Taneil↗

Ceilometer (CEIL) Instrument Handbook

The Vaisala Laser Ceilometer (CEIL) is a self-contained, ground-based, active, remote-sensing device designed to measure cloud-base height, vertical visibility, and potential backscatter signals by aerosols. It detects up to three cloud layers simultaneously. Model CL31 has a maximum vertical range of 7700 meters (m). The laser ceilometer transmits near-infrared pulses of light, and the receiver detects the light scattered back by clouds and precipitation.

47 OTHER INSTRUMENTATION↗

Laser Ceilometer CL51 Demonstration Field Campaign Report

Improvements in the measurements of clouds and the ability to support observation systems are critically important to advancing our understanding and improving global climate model performance. The purpose of a demonstration of the Vaisala CL51 ceilometer was to evaluate its high-range capabilities as a possible augmentation to data provided by the CL31 ceilometer that currently is deployed at U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility sites. Vaisala performed a no-cost demonstration of the equipment; Pacific Northwest National Laboratory (PNNL) supported the data analysis; and ARM provided logistical support, power, maintenance, etc. The laser ceilometer provided measurements of cloud-base height, vertical visibility, and backscatter profile at a vertical range of 15 km. The ceilometer demonstration was conducted during the Characterization of Cirrus and Aerosol Properties campaign (CCAP) to provide coincident observations of cirrus cloud heights and potential backscatter signals by aerosols. This campaign included deployment of a CL51 ceilometer at the ARM Facility’s Southern Great Plains (SGP) site, co-located with the current CL31, micropulse lidar, and balloon-borne sounding system. Data collected from these sensors were analyzed to compare and contrast the data from the CL51 ceilometer.

54 ENVIRONMENTAL SCIENCES↗

Cloud Thickness from Offbeam Returns - Thor Lidar

Physical thickness of a cloud layer, and sometimes multiple cloud layers, can be estimated from the time delay of off-beam returns from a pulsed laser source illuminating one side of the cloud layer. In particular, the time delay of light returning from the outer diffuse halo of light surrounding the beam entry point, relative to the time delay at beam center, determines the cloud physical thickness. The delay combined with the pulse stretch gives the optical thickness. The halo method works best for thick cloud layers, typically optical thickness exceeding 2, and thus compliments conventional lidar which cannot penetrate thick clouds. Cloud layer top and base have been measured independently over the ARM/SGP site using conventional laser ranging (lidar) and the top minus base thickness are compared with a cloud top halo estimate obtained from the NASA/Goddard THOR System (THOR = THickness from Offbeam Returns). THOR flies on the NASA P3, and measures the halo timings from several km above cloud top, at the same time providing conventional lidar cloud top height. The ARM/SGP micropulse lidar provides cloud base height for validation.

Cahalan, R.↗

Let’s Unleash the Network Judgment: A Self-Supervised Approach for Cloud Image Analysis

Accurate cloud type identification and coverage analysis are crucial in understanding the Earth’s radiative budget. Traditional computer vision methods rely on low-level visual features of clouds for estimating cloud coverage or sky conditions. Several handcrafted approaches have been proposed; however, scope for improvement still exists. Newer deep neural networks (DNNs) have demonstrated superior performance for cloud segmentation and categorization. These methods, however, need expert engineering intervention in the preprocessing steps—in the traditional methods—or human assistance in assigning cloud or clear sky labels to a pixel for training DNNs. Such human mediation imposes considerable time and labor costs. We present the application of a new self-supervised learning approach to autonomously extract relevant features from sky images captured by ground-based cameras, for the classification and segmentation of clouds. We evaluate a joint embedding architecture that uses self-knowledge distillation plus regularization. We use two datasets to demonstrate the network’s ability to classify and segment sky images—one with ~85,000 images collected from our ground-based camera and another with 400 labeled images from the WSISEG database. We find that this approach can discriminate full-sky images based on cloud coverage, diurnal variation, and cloud base height. Additionally, it semantically segments the cloud areas without labels. The approach shows competitive performance in all tested tasks, suggesting a new alternative for cloud characterization.

54 ENVIRONMENTAL SCIENCES↗

Estimating Scaled Cloud Height in Pulse Jet Mixed Vessels

To suspend and mix radioactive slurries without pumps or impellers, the performance of pulsed jet mixed vessels has been investigated. The slurry in the pulse tubes is expelled impinging upon the vessel floor and lifting solids to a “cloud height” in a cyclic process. Experiments measuring cloud height for a variety of waste simulants have been conducted for vessel configurations that varied vessel diameter, fill height and pulse tube number, volume, and nozzle diameter. The elevation to which suspended particles rise is termed the cloud height and derives from a balance between the fluid forces of the jet and the gravitational forces acting on the particle ensemble. Here we use scaling to estimate the cloud height based on conservation of mass and momentum and jet similarity. We find that the cloud height varies with the nozzle exit velocity to the 2/3 power in agreement with observations.

cloud height, effective cleaning radius, effective↗

A Bimodal Diagnostic Cloud Fraction Parameterization. Part II: Evaluation and Resolution Sensitivity

A wide range of approaches exists to account for subgrid cloud variability in regional simulations of the atmosphere. This paper addresses the following questions: 1) Is there still benefit in representing subgrid variability of cloud in convection-permitting simulations? 2) What is the sensitivity to the cloud fraction parameterization complexity? 3) Are current cloud fraction parameterizations scale-aware across convection-permitting resolutions? These questions are addressed for regional simulations of a 6-week observation campaign in the U.S. southern Great Plains. Particular attention is given to a new diagnostic cloud fraction scheme with a bimodal subgrid saturation-departure PDF, described in Part I. The model evaluation is performed using ground-based remote sensing synergies, satellite-based retrievals, and surface observations. It is shown that not using a cloud fraction parameterization results in underestimated cloud frequency and water content, even for stratocumulus. The use of a cloud fraction parameterization does not guarantee improved cloud property simulations, however. Diagnostic and prognostic cloud schemes with a symmetric subgrid saturation-departure PDF underestimate cloud fraction and cloud optical thickness, and hence overestimate surface shortwave radiation. These schemes require empirical bias-correction techniques to improve the cloud cover. The new cloud fraction parameterization, introduced in Part I, improves cloud cover, liquid water content, cloud-base height, optical thickness, and surface radiation compared to schemes reliant on a symmetric PDF. Furthermore, cloud parameterizations using turbulence-based, rather than prescribed constant subgrid variances, are shown to be more scale-aware across convection-permitting resolutions.

54 ENVIRONMENTAL SCIENCES↗

Stratus: An interactive steady state mixed layer model for personal computers

A steady-state, horizontally homogeneous, cloud-topped marine boundary layer model based primarily on the work of Lilly (1968) and Schubert et al., (1979) is presented. The conservative thermodynamic variables are equivalent potential temperature, theta(sub e), and total water mixing ratio, q + l. Some of the differences between this and Lilly's (1968) model are: radiation is allowed to penetrate into the boundary layer; cloud top values of longwave radiation, equivalent potential temperature, and water vapor mixing ratio are linear functions of height derived from climatological data at California coastal stations; and the closure assumption assumes a weighted average of Lilly's (1968) maximum and minimum entrainment theories. This model was programmed in FORTRAN and will run interactively on an IBM-compatible personal computer. The program allows the user to specify the geographical location, the wind speed, the sea-surface temperature, the large scale horizontal divergence, and the initial guess for cloud top height. Output includes the steady state values of cloud top and cloud base height, mixed layer equivalent potential temperature and total water mixing ratio, and the associated convective and radiative fluxes.

Guinn, Thomas A.↗

Real-Time Cloud, Radiation, and Aircraft Icing Parameters from GOES over the USA

A preliminary new, physically based method for realtime estimation of the probability of icing conditions has been demonstrated using merged GOES-10 and 12 data over the continental United States and southern Canada. The algorithm produces pixel-level cloud and radiation properties as well as an estimate of icing probability with an associated intensity rating Because icing depends on so many different variables, such as aircraft size or air speed, it is not possible to achieve 100% success with this or any other type of approach. This initial algorithm, however, shows great promise for diagnosing aircraft icing and putting it at the correct altitude within 0.5 km most of the time. Much additional research must be completed before it can serve as a reliable input for the operational CIP. The delineation of the icing layer vertical boundaries will need to be improved using either the RUC or balloon soundings or ceilometer data to adjust the cloud base height, a change that would require adjustment of the cloud-top altitude also.

Minnis, Patrick↗

Study of atmospheric parameters measurements using MM-wave radar in synergy with LITE-2

The Lidar In-Space Technology Experiment, (LITE), has been developed, designed, and built by NASA Langley Research Center, to be flown on the space shuttle 'Discovery' on September 9, 1994. Lidar, which stands for light detecting and ranging, is a radar system that uses short pulses of laser light instead of radio waves in the case of the common radar. This space-based lidar offers atmospheric measurements of stratospheric and tropospheric aerosols, the planetary boundary layer, cloud top heights, and atmospheric temperature and density in the 10-40 km altitude range. A study is being done on the use, advantages, and limitations of a millimeterwave radar to be utilized in synergy with the Lidar system, for the LITE-2 experiment to be flown on a future space shuttle mission. The lower atmospheric attenuation, compared to infrared and optical frequencies, permits the millimeter-wave signals to penetrate through the clouds and measure multi-layered clouds, cloud thickness, and cloud-base height. These measurements would provide a useful input to radiation computations used in the operational numerical weather prediction models, and for forecasting. High power levels, optimum modulation, data processing, and high antenna gain are used to increase the operating range, while space environment, radar tradeoffs, and power availability are considered. Preliminary, numerical calculations are made, using the specifications of an experimental system constructed at Georgia Tech. The noncoherent 94 GHz millimeter-wave radar system has a pulsed output with peak value of 1 kW. The backscatter cross section of the particles to be measured, that are present in the volume covered by the beam footprint, is also studied.

Andrawis, Madeleine Y.↗

Polarimetric Radar Convective Cell Tracking Reveals Large Sensitivity of Cloud Precipitation and Electrification Properties to CCN

Deep convective clouds are propelled by rising air currents and are composed of cloud droplets that nucleate on CCN aerosols. Isolating the effects of CAPE and N CCN on cloud properties has been an unresolved challenge. Tracking the time-height evolution of a large number of individual summer convective storm cells in the Houston area under various CAPE and N CCN shows their relations to the storm's dynamics, precipitation, and electrification processes. The results show that increased N CCN invigorates the convection, produces larger hydrometeors, and enhances lightning. Variability in N CCN was found to be more important than variability in CAPE, cloud base height, and wind shear in explaining the variability of the vigor and electrification of deep convective clouds in the study area.

54 ENVIRONMENTAL SCIENCES↗

Comparison and calibration of NCAR electra instruments: July 5 and 7, 1987

Measurements of temperature, water vapor, cloud liquid water, and lidar cloud height taken by the National Center for Aeronautical Research (NCAR) Electra are analyzed for two days of the First ISCCP Regional Experiment (FIRE) stratocumulus field program. Examination of instrument time series, correlations between sensors, soundings through the layer, and lidar measurements of cloud base height are used to correct sensor offset problems, check for probe wetting, and choose the most accurate measurements of temperature, humidity, and cloud liquid water.

Austin, Philip H.↗

Cloud Property Retrieval Products for Graciosa Island, Azores

The motivation for developing this product was to use the Dong et al. 1998 method to retrieve cloud microphysical properties, such as cloud droplet effective radius, cloud droplets number concentration, and optical thickness. These retrieved properties have been used to validate the satellite retrieval, and evaluate the climate simulations and reanalyses. We had been using this method to retrieve cloud microphysical properties over ARM SGP and NSA sites. We also modified the method for the AMF at Shouxian, China and some IOPs, e.g. ARM IOP at SGP in March, 2000. The ARSCL data from ARM data archive over the SGP and NSA have been used to determine the cloud boundary and cloud phase. For these ARM permanent sites, the ARSCL data was developed based on MMCR measurements, however, there were no data available at the Azores field campaign. We followed the steps to generate this derived product and also include the MPLCMASK cloud retrievals to determine the most accurate cloud boundaries, including the thin cirrus clouds that WACR may under-detect. We use these as input to retrieve the cloud microphysical properties. Due to the different temporal resolutions of the derived cloud boundary heights product and the cloud properties product, we submit them as two separate netcdf files.

54 ENVIRONMENTAL SCIENCES↗

Spatial Variability of Surface Irradiance Measurements at the Manus ARM Site

The location of the Atmospheric Radiation Measurement (ARM) site on Manus island in Papua New Guinea was chosen because it is very close the coast, in a geographically at, near-sea level area of the island, minimizing the impact of local island effects on the meteorology of the measurements [Ackerman et al., 1999]. In this study, we confirm that the Manus site is in deed less impacted by the island meteorology than slightly inland by comparing over a year of broadband surface irradiance and ceilometer measurements and derived quantities at the standard Manus site and a second location 7 km away as part of the AMIE-Manus campaign. The two sites show statistically similar distributions of irradiance and other derived quantities for all wind directions except easterly winds, when the inland site is down wind from the standard Manus site. Under easterly wind conditions, which occur 17% of the time, there is a higher occurrence of cloudiness at the down wind site likely do to land heating and orographic effects. This increased cloudiness is caused by shallow, broken clouds often with bases around 700 m in altitude. While the central Manus site consistently measures a frequency of occurrence of low clouds (cloud base height less than 1200 m) about 25+4% regardless of wind direction, the AMIE site has higher frequencies of low clouds (38%) when winds are from the east. This increase in low, locally produced clouds causes an additional -20 W/m2 shortwave surface cloud radiative effect at the AMIE site in easterly conditions than in other meteorological conditions that exhibit better agreement between the two sites.

Manus ARM site↗