Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cavities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design and optimization of higher order mode couplers for the superconducting cavities of the PERLE energy recovery linac

The Powerful Energy Recovery Linac for Experiments (PERLE) is an energy recovery linac (ERL) facility based on superconducting radio-frequency (SRF) technology to be hosted at the Laboratoire de Physique des 2 Infinis Irène Joliot-Curie (IJCLab) in France. With a target beam power of 10 MW, PERLE aims to demonstrate the high-current, continuous wave, multi-pass operation to validate options for future high-energy machines, such as the 50 GeV ERL proposed for the Large Hadron electron Collider (LHeC) and the Future Circular electron-hadron Collider (FCC-eh), and host dedicated particle physics and nuclear experiments. In high-current ERLs, the regenerative Beam Breakup (BBU), emerging from the beam and cavity Higher Order Modes (HOMs) interaction, is a major concern for their stable operation. Beam-induced HOMs can increase the cavity heat load at cryogenic temperature and cause beam instabilities. HOM couplers are installed in the cavity beam pipes to absorb HOM energy and mitigate these effects. This thesis presents the design and optimization of several coaxial HOM couplers for the 5-cell 801.58 MHz elliptical Nb cavities of the 500 MeV PERLE ERL configuration. The RF transmission of the HOM couplers was optimized to enhance the damping of the most dangerous HOMs. The optimized HOM couplers were integrated into endgroups to simulate their damping performance and thermal behavior. The optimized HOM couplers were 3D-printed in epoxy and copper-coated. Low-power RF measurements were conducted on the produced HOM couplers installed in copper PERLE-type cavities to validate their damping performance and propose several endgroups for the PERLE 5-cell cavity to mitigate HOMs below the BBU instability limits.

Barbagallo, Carmelo↗
DOE OSTI2026

Dynamically suppressing cavity dephasing induced by frequency fluctuations of a coupled nonlinear mode

High-coherence superconducting cavities offer a promising platform for quantum information, with long coherence times and negligible intrinsic dephasing. However, cavity control generally relies on nonlinear Josephson elements whose frequency fluctuations are inherited by the cavity as dephasing, potentially limiting control fidelities and eroding the noise bias used in error-correction protocols. Here, we introduce Stark-Assisted Flux-noise Evasion (SAFE), a hardware-efficient protocol that protects the cavity from inherited dephasing using only a weak off-resonant microwave drive applied to the nonlinear element. As a concrete setup, we analyze a 3D superconducting cavity dispersively coupled to a flux-tunable transmon (FTT) subject to $1/f$ flux noise. Analytical predictions are confirmed by Monte Carlo simulations with realistic parameters, which show that SAFE can extend the cavity dephasing time by more than an order of magnitude while keeping residual drive-induced decoherence subdominant.

Lu, Yunwei [Northwestern U.] (ORCID:00000003401756↗
DOE OSTI2025

Asymmetrical cavity design that bypasses mode mixings in axion haloscope experiments

Microwave cavities used in axion haloscope experiments typically employ a tuning rod as a means to widen the range of resonance frequencies at which it is sensitive to axion-to-photon conversion. A realistic tuning mechanism requires a gap between the cavity end caps and the tuning rod to ensure movement, and causes some modes to hybridize with the resonant mode that is being tracked for the experiment. These so-called mode mixings lead to gaps in the frequency range that practically lose sensitivity to axions. Here, to solve this problem, we present a cavity design which, for two tuning rod configurations corresponding to a lower and higher frequency range, have a dielectric rod inserted at a specific location that makes the cavity asymmetrical. Moving the tuning rod closer to the dielectric insert changes the location and frequency of the mode mixing compared to when it is farther away from it. This design is easily realizable in practical experiments and makes possible an axion dark matter search with minimal loss in sensitivity due to mode mixings. We also show that the same design has the same desired effect when cavity dimensions are scaled down to be smaller and are at higher resonance frequencies.

Axion↗
DOE OSTI2024

Development of a strip-shaped X-ray mapping system for 9-cell superconducting cavities

Electrons emitted via field emission during superconducting (SC) radio-frequency (RF) cavity tests at vertical test stands often collide with the iris region inside the cavity, generating X-rays at these locations. In 1.3 GHz 9-cell SC RF cavities designed for the International Linear Collider (ILC), stiffener rings located outside the iris region between cells can interfere with X-ray detection, complicating the precise identification of field emission sites. Hence, in this study, we developed a high-density strip X-ray mapping systems (sX-map) that can be inserted into the iris region of ILC-type 9-cell SC RF cavities. This sX-map facilitates efficient and accurate detection of X-rays generated near the irises, unaffected by the presence of stiffener rings. The sX-map consisted of 32 sensors per strip, with sensors spaced approximately 10 mm apart. It was deployed in every iris of the 9-cell cavity, using a total of 320 sensors. A multiplexer was employed to facilitate the readout of a large number of detectors using a minimal number of signal lines, connecting the strips inside within the vertical test cryostat. In a vertical test conducted at Jefferson Lab (JLab), we demonstrated the capability of sX-map to detect X-rays despite the presence of a stiffener ring. This paper presents the detailed design of the sX-map and the results from the vertical test at JLab.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Cavity-assisted magnetization switching in a quantum spin-phonon chain

Néel order switching in antiferromagnets has typically required intense optical driving, leading to substantial heating and limited efficiency. By placing antiferromagnets inside a terahertz-driven optical cavity, we propose a multi-particle mechanism for Néel order switching that benefits from reduced heating. Our analysis reveals that phonons are indispensable to this mechanism. A driven cavity mode couples to a spin-phonon chain, with all excitations dissipating energy through external baths. Mean-field analysis shows that cavity photons induce sublattice spin-density imbalance—an intrinsic symmetry-breaking effect absent without the cavity. Contrary to known (1–10 V/nm) laser fields required to switch the Néel order, our mechanism enables switching at remarkably low laser fields (1–5 V/μm), selectively targeting low-energy and perpendicular magnon modes. By virtue of the suppressed heating, the switching remains highly tunable through laser fluence, damping, and photon loss, establishing a low-dissipation route toward cavity-assisted opto-spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A Planar-Cavity Receiver Configuration for High-Temperature Solar Thermal Processes: Preprint

Next generation concentrating solar thermal power (CSP) and novel solar thermochemical systems using concentrating solar thermal (CST) energy require high operating temperatures exceeding those of traditional nitrate-salt CSP systems. Particle-based systems are attractive for next-generation CSP and CST applications owing to high-temperature stability of inert silica- or alumina-based particulate materials, the lack of low-temperature freezing concerns that limit molten salt and/or molten metal heat transfer media, and cost-effective thermal storage using low-cost particulate and containment materials. Open-cavity falling particle receivers have many potential advantages, but face challenges pertaining to scalability, thermal loss, and particle loss through the open aperture, and are infeasible for chemical processes that require a low-oxygen ambient environment. Enclosed receiver configurations can be scalable, avoid particle loss when heating particles, and have potential for future chemical processes; however, particle-based heat transfer media provide substantially lower heat transfer rates than liquid media, and thus enclosed particle receiver designs require novel configurations to limit surface temperatures under the high incident solar flux concentrations necessary for high receiver thermal efficiency at high temperature. This paper introduces the novel planar-cavity enclosed particle receiver configuration in which arrays of planar surfaces are arranged into sub-vertical cavities. Large angles between the panel surface normal vectors and the aperture surface normal allow the incoming solar beam to distribute along the panel walls. Correspondingly, a high incident solar flux concentration at the cavity aperture produces substantially lower absorbed solar flux concentration on any panel wall. Sets of individual vertical cavities can be arranged to form a scalable receiver configuration.

cavity receiver↗
DOE OSTI2025

Continuous recoil-driven lasing and cavity frequency pinning with laser-cooled atoms

Abstract Laser-cooled gases of atoms interacting with the field of an optical cavity are a versatile tool for quantum sensing and the simulation of quantum systems. These systems can exhibit phenomena such as self-organization phase transitions, lasing mechanisms, squeezed states and protection of quantum coherence. However, investigations of these phenomena typically occur in a discontinuous manner due to the need to reload atomic ensembles. Here we demonstrate hours-long continuous lasing from laser-cooled 88 Sr atoms loaded into a ring cavity. The required inversion to produce lasing arises from inversion in the atomic-momentum degrees of freedom, which is linked to the self-organization phase transitions and collective atomic recoil lasing observed previously only in a cyclic fashion. We find that over a broad parameter range, the sensitivity of the lasing frequency to changes in cavity frequency is significantly reduced due to an atomic loss mechanism, suggesting a potential approach for mitigating low-frequency cavity noise. Our findings open opportunities for continuous cavity quantum electrodynamics experiments and robust and continuous super-radiant lasers.

Schäfer, Vera M. (ORCID:0000000210003737)↗
DOE OSTI2026

Cavity-altered superconductivity

Is it feasible to alter the ground-state properties of a material by engineering its electromagnetic environment? Inspired by theoretical predictions, experimental realizations of such cavity-controlled properties without optical excitation are beginning to emerge. Here we devised and implemented a new platform to realize cavity-altered materials. Single crystals of hyperbolic van der Waals (vdW) compounds provide a resonant electromagnetic environment with enhanced density of photonic states and prominent mode confinement. We interfaced hexagonal boron nitride (hBN) with the molecular superconductor κ-(BEDT-TTF) 2 Cu[N(CN) 2 ]Br (κ-ET). The frequencies of infrared hyperbolic modes (HMs) of hBN match the infrared-active carbon–carbon (C=C) stretching molecular resonance of κ-ET implicated in superconductivity. Nano-optical data supported by first-principles molecular Langevin dynamics simulations confirm the presence of resonant coupling between the hBN hyperbolic cavity modes and the C=C stretching mode in κ-ET. Meissner-effect measurements using magnetic force microscopy (MFM) demonstrate a strong suppression of superfluid density near the hBN/κ-ET interface. Non-resonant control heterostructures, including RuCl 3 /κ-ET and hBN/Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO), do not show the pronounced superfluid suppression. These observations suggest that hBN/κ-ET realizes a cavity-altered superconducting ground state. Our work highlights the potential of dark cavities devoid of external photons for engineering electronic ground-state properties of complex quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capture Cavities For The Cw Polarized Positron Source Ce + baf

The initial design of the capture cavities for the continuous wave (CW) polarized positron beams at Jefferson Lab (Ce + BAF) is presented. A chain of standing wave multi-cell copper cavities inside a solenoid tunnel are selected to improve the positron capture efficiency. The cavity design strategy is presented to accommodate constrains from the large phase distribution of the incident beams, RF power and RF heating. A matrix of design parameters’ range are given for future system optimization when the capture cavities are considered together with other sub-systems and beam dynamics. The contents will also be useful for other CW cavity design for beams with large phase space distribution.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Impact of nitrogen and oxygen interstitials on niobium SRF cavity performance

Superconducting radio frequency (SRF) cavities are the leading technology for highly efficient particle acceleration, and their performance can be significantly enhanced through the controlled introduction of interstitial impurities into bulk niobium. Nitrogen doping has demonstrated a substantial reduction in surface resistance, which improves the quality factor of the cavities. More recently, oxygen doping has emerged as a promising alternative, demonstrating comparable reductions in surface resistance. In this study, we combine cavity measurements on 1.3 GHz niobium SRF cavities subjected to a range of nitrogen- and oxygen-based treatments with material characterizations performed on cavity cutouts processed under identical conditions. This approach allows us to quantitatively assess the contribution of each impurity to the reduction of surface resistance. We find that nitrogen is ten times more effective than oxygen in reducing surface resistance at 16 MV/m. We also observe an additive effect of O and N impurities in reducing RT. We discuss these results in the context of field-dependent nonequilibrium superconductivity, gap enhancement, and hydrogen trapping mechanisms.

Hu, H. [Chicago U.; Fermilab] (ORCID:0009000330621↗
DOE OSTI2024

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array

Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O 2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 10 16 cm -3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O 2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Energy transfer between localized emitters in photonic cavities from first principles

Radiative and nonradiative resonant couplings between defects are ubiquitous phenomena in photonic devices used in classical and quantum information technology applications. In this work, we present a first-principles approach to enable quantitative predictions of the energy transfer between defects in photonic cavities, beyond the dipole-dipole approximation and including the many-body nature of the electronic states. As an example, we discuss the energy transfer from a dipolelike emitter to an 𝐹 center in MgO in a spherical cavity. We show that the cavity can be used to controllably enhance or suppress specific spin-flip and spin-conserving transitions. Specifically, we predict that an ∼10–100 enhancement in the resonant energy transfer rate can be gained in the case of the 𝐹 center in MgO at ∼10 nm distances from a dipolar source, using rather moderate cavity with quality factor 𝑄 ∼ 400. We also show that a similar suppression in the transfer rate can be achieved by off-tuning the cavity resonance relative to the emitter transition energy. The framework presented here is general and readily applicable to a wide range of devices where localized emitters are embedded in microspheres, core-shell nanoparticles, and dielectric Mie resonators. Hence, our approach paves the way to predict how to control energy transfer in quantum memories and in ultrahigh-density optical memories, and in a variety of quantum information platforms.

First-principles calculations↗
DOE OSTI2025

Ultrafast dynamics of a fermion chain in a terahertz field-driven optical cavity

In this article, we study the effect of a terahertz field-driven single cavity mode for ultrafast control of a fermion chain with dissipation-induced nonlinearity and quadratic coupling to an infrared-active phonon mode. Unlike the first-order phase transition in the nonequilibrium steady state of the system without a cavity or with a high-quality cavity, we find that a realistic dissipation in a low-quality driven cavity process prevents such a transition. Without realistic photon loss from the cavity, the transition only survives for the lower phonon-polariton branch with strong drive; a weak laser field fails to induce the phase transition and renders the polaritons symmetrical. The ability to control the phase transition is crucial for realizing strongly modulated steady states; we propose experimentally feasible regimes where this occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Comparing Exciton-Polariton Couplings in Two-Dimensional MoS2 Cavities

Exciton-polaritons (EPs) are an emerging approach to achieve strong light-matter coupling and robust quantum phenomena, with application to areas such as photonic neuromorphic computing for instance reservoir computing. 2D transition metal dichalcogenides (TMDs) are promising candidates to host EPs due to their potential for strong coupling as evidenced by large Rabi splitting energies, which in the case of few-layer MoS2 has been demonstrated to reach 293 meV when coupled to the C exciton, placing it in the ultrastrong coupling regime, at room temperature. Here we examine how the Rabi splitting of CVD-grown monolayer MoS2 in a cavity can be optimized by tuning two variables: cavity geometry (thickness of silver and dielectric spacers) and the targeted exciton for coupling (A at about 1.9 eV, B at about 2.06 eV, or C at about 2.9 eV). With the cavity geometry, there is a tradeoff between optical field confinement and transmission. With the targeted exciton, there may be a tradeoff between Rabi splitting and lifetime. Transfer matrix simulations are used to inform how thick the cavity layers need to be, and at what angle measurements should be performed, to achieve Rabi splitting at a certain exciton energy. Experimentally, the Rabi splitting is measured by placing the cavity at a specified angle and measuring the optical reflectance and transmittance. By fitting the data, we find Rabi splittings of 124 meV, 194 meV, and 288 meV for the A, B, and C excitons, respectively, which places them in the strong, and on the edge of the ultrastrong, coupling regime.

exciton-polaritons↗
DOE OSTI2025

Development of the first 1 GHz niobium-tin quarter-wave cavity

Niobium-Tin (Nb3Sn) is a promising alternative to pure niobium for low-beta ion accelerators due to low RF losses even at high frequencies. At 4.5 K, the expected Bardeen-Cooper-Schrieffer resistance of Nb3Sn is a few nano-Ohms at 1 GHz, with two orders of magnitude improvement compared to pure niobium. The low Nb3Sn RF losses allow the use of higher frequency, much smaller cavities while maintaining 4.5 K operation that is compatible with cryocoolers. This work aims to demonstrate the feasibility of coating a high-frequency 1 GHz, compact quarter-wave cavity. The development of this cavity has the potential to transform low-beta ion accelerators through size reductions and by enabling the replacement of large helium cryoplants with small plug-in cryocoolers. We have designed, built, and tested a 1GHz Nb3Sn coated quarter-wave cavity. Nb3Sn coating has been performed once by vapor diffusion at Fermilab. Cryogenic cold tests show a quality factor of ~1E9 at low accelerating electric fields or ~7 times higher than the theoretical limit for pure niobium at 1GHz. This first coating does not yet meet our quality factor or gradient goals; however, we plan to continue to develop this cavity.

Zhou, Yang [Argonne]↗
DOE OSTI2025

Testing of the SSR2 SRF cavity tuner for PIP-II at 2 K

The PIP-II linac will include thirty-five 325 MHz Single Spoke Resonators Type 2 (SSR2) cavities. Each cavity will be equipped with a tuner for resonance control. The tuner consists of mechanical frame with a motor for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. The tuner was tested for the first time at Fermilab on an SSR2 cavity. This dressed cavity-tuner system was tested at the single spoke testing cryo-stat (STC) in Fermilab at 2 K. The tuner performance was evaluated and is presented. Lastly, cavity-tuner mechanical modes were measured via the piezos.

Contreras-Martinez, C. [Fermilab] (ORCID:000000018↗
DOE OSTI2024

AN OVERVIEW OF PLASMA PROCESSING OF SRF CAVITIES AT JLAB

Plasma processing is a common technique where the free oxygen produced in a low-pressure RF plasma breaks down and removes hydrocarbons from surfaces. This increases the work function and reduces the secondary emission coefficient of the treated surfaces. Jefferson Lab has an ongoing R&D program in plasma processing. The experimental program investigated processing using argon/oxygen and helium/oxygen gas mixtures. The initial focus of the effort was processing C100 cavities by injecting RF power into the HOM coupler ports. We also developed the methods for establishing a plasma C75 cavities where the RF power is injected via the fundamental power-coupler. As part of the process development we processed, three C100 cryomodules in our off-line cryomodule test facility. In May 2023 we processed four C100 cryomodules in-situ in the CEBAF accelerator with the cryomodules returning to an operational status in Sept. 2023. The cumulative improvement in field emission free operation, as measured on a cavity by cavity basis, was 59 MeV or 24%. We recently started processing 7 cryomodules in the CEBAF accelerator in August 2024. Methods systems and results from processing cryomodules and individual cavities in the vertical test will be presented. Current status and future plans will also be presented.

Ganey, Tiffany↗
DOE OSTI2026

A simulation of the Fermilab Main Injector dual power amplifier cavities

The Fermilab Main Injector accelerating cavities have sparking issues when they are run at voltages higher than those required by the PIP-II project. This is a problem Fermilab is working on as planning begins for the next upgrade to the accelerator complex. One of the methods being used to address the issue is the development of a CST Microwave Studio simulation to accurately model the PIP-II dual power amplifier cavities and identify which part(s) of the cavity is causing sparking to develop. The model will also be used to determine if changes to the cavity geometry may allow the cavity to be used at higher voltages before sparking occurs.

Stevenson, Susanna [Fermilab] (ORCID:0009000891261↗