Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Solar pyrolysis of waste rubber tires using photoactive catalysts

Highlights: • TiO{sub 2} based photocatalysts were applied in the solar pyrolysis of waste rubber. • Pt, Pd and Bi{sub 2}O{sub 3}/SiO{sub 2} doping enhanced the TiO{sub 2} cracking ability. • The highest gas yield of 41% was achieved over Pd/TiO{sub 2}. • The lowest carbon number of the pyrolysis oil was achieved over Pd/TiO{sub 2}. - Abstract: The solar pyrolysis of waste tire rubber was investigated with the application of heterogeneous photocatalysts including TiO{sub 2}, Pd/TiO{sub 2}, Pt/TiO{sub 2}, Pd-Pt/TiO{sub 2}, and Bi{sub 2}O{sub 3}/SiO{sub 2}/TiO{sub 2}. Experiments were performed at temperatures ranging between 550 and 570 °C under solar irradiations of 950–1050 W/m{sup 2}. The gas yield from non-catalytic solar pyrolysis was at 20% while the use of TiO{sub 2} catalyst increased the gas yield to 27%. Doping of TiO{sub 2} with noble metals and Bi{sub 2}O{sub 3}/SiO{sub 2} metal oxides enhanced further the cracking ability of the catalyst. Bi{sub 2}O{sub 3}/SiO{sub 2}/TiO{sub 2} gave a 32% gas yield. The highest gas yields of 40% and 41% were achieved over Pd-Pt/TiO{sub 2} and Pd/TiO{sub 2} catalysts, respectively. Catalyst characterization by BET, SEM, EDX and XRD showed the role of metal doping in altering the morphology of TiO{sub 2}, resulting in nanocrystallites, larger pore volume and higher surface area. Both, Pd and Bi influenced the photocatalytic properties of TiO{sub 2} improving cracking activity during pyrolysis of waste rubber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reducing Coke and Increasing Bio-Oil Yield during Catalytic Fast Pyrolysis of Biomass Using Phosphorus-Modified Zeolite Catalysts

Catalytic fast pyrolysis (CFP) is a promising strategy for producing hydrocarbon transportation fuels from biomass feedstocks. However, catalyst development is needed to increase bio-oil yields and enhance process economics. In this work, we demonstrate how post synthetic modification of formed ZSM-5 with phosphorus shifts CFP selectivity from coke and light gases toward the desired bio-oil product. Microscale experiments demonstrated reduced coke production relative to unmodified ZSM-5 and identified an optimal P loading. Extensive catalyst characterization revealed that P interacted with Al sites to reduce the acid site density, with preferential binding to the strongest acid sites. Insights from the microscale experiments were leveraged to produce kilogram quantities of formed P-ZSM-5 for evaluation in a larger semi-integrated process. These experiments generated liters of bio-oil that was hydrotreated and fractionated into gasoline, diesel, and jet cuts. The phosphorus-modified ZSM-5 improved CFP bio-oil yield, resulting in an 11% relative increase in the carbon yield from biomass to aviation fuel and a 14% decrease in the minimum fuel selling price. These results highlight the impact targeted changes in catalyst acidity, achieved by adding 2.5 wt % P, can have on the carbon efficiency and feasibility of fuel production from biomass feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2022

Recent progress toward catalyst properties, performance, and prediction with data-driven methods

Herein, data-driven approaches are currently renovating the field of heterogenous catalysis and open a door to advance catalyst design. Their success depends heavily on the synergy among machine learning (ML), experimental data, and quantum mechanical (QM) calculations. In this brief survey of recent progress, we examine catalysis informatics in the context of (1) ML-aided catalyst characterizations, (2) knowledge extractions from experimental data, (3) predictions of catalytic properties and constructions of reaction networks, and (4) ML-enabled large-scale QM simulations. An outlook on the current challenges of this rapidly evolving field is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recommendations to standardize reporting, execution, and interpretation of X-ray Absorption Spectroscopy measurements

In July of 2022, a National Science Foundation (NSF)- and US Department of Energy (DOE)-sponsored workshop was held on the topic of rigor and reproducibility (R&R) in thermal, heterogeneous catalysis. As a result of the workshop, a report has been published entitled "Addressing Rigor and Reproducibility in Thermal, Heterogeneous Catalysis"[1]. This manuscript summarizes one section of the report: "Recommendations for catalyst characterization by X-ray absorption spectroscopy". Here, the section focuses exclusively on X-ray absorption spectroscopy (XAS) and is narrowly focused on recommendations for the collection and interpretation of XAS data for routine experiments. Therefore, one should not expect a detailed guide for each different experiment that one may perform nor are the recommendations designed to be overly prescriptive. However, the report is designed to draw attention to key pitfalls and common problems in the collection, reporting, analysis and interpretation of XAS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recommendations to standardize reporting, execution and interpretation of STEM/TEM measurements

In July of 2022, a National Science Foundation (NSF)- and US Department of Energy (DOE)-sponsored workshop was held on the topic of rigor and reproducibility (R&R) in thermal, heterogeneous catalysis. A report has been published entitled “Addressing Rigor and Reproducibility in Thermal, Heterogeneous Catalysis” as a result of the workshop [1]. This manuscript attempts to summarize one section of the report entitled Recommendations for catalyst characterization by transmission electron microscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Operando High-Energy-Resolution X-ray Spectroscopy of Evolving Cu Nanoparticle Electrocatalysts for CO 2 Reduction

Advances in electrocatalysis research rely heavily on building a thorough mechanistic understanding of catalyst active sites under realistic operating conditions. Only recently have techniques emerged that enable sensitive spectroscopic data collection to distinguish catalytically relevant surface sites from the underlying bulk material under applied potential in the presence of an electrolyte layer. Here, we demonstrate that operando high-energy-resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XAS) is a powerful spectroscopic method which offers critical surface chemistry insights in CO 2 electroreduction with sub-electronvolt energy resolution using hard X-rays. Combined with the high surface area-to-volume ratio of 5 nm copper nanoparticles, operando HERFD-XAS allows us to observe with clear evidence the breaking of chemical bonds between the ligands and the Cu surface as part of the ligand desorption process occurring under electrochemical potentials relevant for the CO 2 reduction reaction (CO 2 RR). In addition, the dynamic evolution of oxidation state and coordination number throughout the operation of the nanocatalyst was continuously tracked. With these results in hand, undercoordinated metallic copper nanograins are proposed to be the real active sites in the CO 2 RR. In conclusion, this work emphasizes the importance of HERFD-XAS compared to routine XAS in catalyst characterization and mechanism exploration, especially in the complicated electrochemical CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Microwave-Assisted Catalytic Conversion of Tar Using Iron Catalyst Doped with Ni/La/Ce

The goal of this research is to study the microwave-assisted catalytic dry reforming of toluene using Fe/Al2O3 as a catalyst in the presence of various dopants such as Ni/La/Ce in a conventional fixed-bed reactor. Initial studies show that both CO2 and toluene conversion can be achieved up to 85% at 500 °C. Higher toluene conversion and syngas production was achieved under microwave conditions compared to conventional thermal conditions. The pre and post-reaction catalyst characterizations were performed using X-ray diffraction analysis (XRD) and thermogravimetric analysis (TGA). The tar analysis was performed using gas chromatography–mass spectrometry (GC-MS). The product gas mainly consisted of H2, CO, methane, propane, ethylene, and ethane along with small amounts of benzene, and naphthalene. The production of benzene indicates the hydrodemethylation (HDM) process of toluene, which requires hydrogen to initiate the reaction. The reaction pathway was proposed based on the observed product gas.

Linge Gowda, Anitha Shankara↗
DOE OSTI2026

Dynamic Electric Field Assisted CO 2 Methanation

Energy-efficient advanced chemical reactions are essential for accelerating the growth of hydrocarbon economy. Sabatier reaction stands out for its potential to effectively transform carbon dioxide into valuable hydrocarbons and is an asset for long-duration Mars missions. This study explores a novel catalytic approach that harnesses electric field-assisted catalysis to substantially enhance the efficiency of the Sabatier reaction. Application of a dynamically perturbed electric field at 1000 Hz resulted in remarkable enhancements, increasing methane formation rates by over 100% at 350 °C and by 74% at 400 °C. Post-reaction catalyst characterization further revealed reduced blockage of active catalytic surface area under the applied electric field, emphasizing improved catalytic longevity and sustained activity. These results underscore the potential of tailored electric field waveforms to dynamically modulate elementary reaction kinetics and surface processes, positioning electric field-assisted catalysis as a transformative strategy for energy-efficient, cost-effective chemical manufacturing and energy conversion technologies.

42 - ENGINEERING↗
NASA NTRS2014

Evaluating the Adsorptive Capabilites of Chemsorb 1000 and Chemsorb 1425

The removal of trace contaminants from spacecraft cabin air is necessary for crew health and comfort during long duration space exploration missions. The air revitalization technologies used in these future exploration missions will evolve from current ISS ISS State-of-Art (SOA) and is being designed and tested by the Advanced Exploration Systems (AES) Program's Atmosphere Resource Recovery and Environmental Monitoring (ARREM) project. The ARREM project is working to mature optimum atmosphere revitalization and environmental monitoring system architectures to enable exploration beyond Lower Earth Orbit (LEO). The Air Revitalization Lab at KSC is one of six NASA field centers participating in the ARREM that specializes in adsorbent and catalyst characterization with simulated spacecraft gas streams using combinations of pressure, O2 partial pressure, CO2 partial pressure, and humidity that are representative of a range of anticipated cabin atmospheric conditions and loads. On board ISS, the Trace Contaminant Control Subassembly (TCCS) provides active control of trace contaminants from the cabin atmosphere utilizing physical adsorption, thermal catalytic oxidation, and chemical adsorption processes. High molecular weight contaminants and ammonia (NH3) are removed a granular activated carbon treated with approx. 10% by weight phosphoric acid (H3PO4) (B-S Type 3032 4×6 mesh), which is expendable and is periodically refurbished. The Type 3032 granular activated carbon bed is no longer commercially available and therefore it is important to characterize the efficiency and capacity of commercially available NH3 sorbents. This paper describes the characterization of two Molecular Products LTD activated carbons: Chemsorb 1000 and Chemsorb 1425. Untreated activated carbons (e.g. Chemsorb 1000) remove contaminants by physisorption, which concentrates the contaminant within the pores of the carbon while letting air to pass through the sorbent4. Low molecular weight or polar gases (e.g. HCl, SO2, formaldehyde, and NH3) are not removed by physisorption and typically require chemisorption for removal. Treated activated carbons (e.g. Chemsorb 1425) are impregnated with a a chemical agent (e.g. phosphoric acid) that reacts with those gases, converting them to solids or salts within the carbon and removes them from the air stream. This process occurs via neutralization or catalysis reactions and adsorption capacity is exhaustedwhen the available impregnated chemicals are consumed. Moisture affects removal performance since adsorption sites within the pores are filled with water. The performance of impregnated carbons may be enhanced by moisture content because the mechanisms of contaminant removal are chemical reactions that occur in reagents contained within the pores. The adsorptive capacity data (mol/kg) of Chemsorb 1000 and 1425 for gas mixtures (ethanol, acetone, toluene, acetaldehyde, dichloromethane, and xylene) was measured with 40% relative humidity at 23 deg C air temperature. The adsorptive capacity data (mol/kg) of Chemsorb 1425 was measured using NH3 gas streams.

adsorptive capacities↗
DOE OSTI2020

Pyrolysis Vapor and Bio-Oil Preconditioning via Ex Situ Hydrodeoxygenation and Alkylation Using a Heteropolyacid Catalyst

Ex situ catalytic preconditioning of biomass pyrolysis vapors (partial deoxygenation) has the potential for both reducing the oxygen content and beneficially influencing the oxygen speciation of condense bio-oils for enhancement of downstream condensed phase upgrading processes. Here, condensed phase upgrading processes may refer to both coprocessing and hydroprocessing with vacuum gas-oil (VGO). Reduction of oxygen content to produce bio-oils with greater hydrophobicity can enhance VGO-solubility while tailoring of oxygen speciation by removal of reactive carbonyls (e.g., acetic acid) can lessen catalytic deactivation via coking reactions. 1,2 Furthermore, enhanced VGO-solubility and reduced coking leads to greater biogenic carbon incorporation in end-products from condensed phase upgrading processes. By leveraging the hydrodeoxygenation and alkylation activity of a titania-supported molybdenum-heteropolyacid (Mo-HPA/TiO2) catalyst, pyrolysis vapors and resulting condensed bio-oils were effectively preconditioned for downstream upgrading. 3 Data regarding the use of Mo-HPA/TiO2 for pyrolysis vapor preconditioning will be presented on, including method of employment, catalyst characterization, and impacts on bio-oil in relation to downstream condensed phase upgrading processes. Our approach is to: Compare Mo-HPA/TiO2 product distribution to HZSM-5; Investigate Mo-HPA/TiO2 regeneration and characterize changes in acid site character; Assess product differences in terms of enhanced VGO-solubility.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Influence of Metal-Alkyls on Early-Stage Ethylene Polymerization over a Cr/SiO 2 Phillips Catalyst: A Bulk Characterization and X-ray Chemical Imaging Study

The Cr/SiO 2 Phillips catalyst has taken a central role in ethylene polymerization since its invention in 1953. The uniqueness of this catalyst is related to its ability to produce broad molecular weight distribution (MWD) PE materials as well as that no co-catalysts are required to attain activity. Nonetheless, co-catalysts in the form of metal-alkyls can be added for scavenging poisons, enhancing catalyst activity, reducing the induction period, and tailoring polymer characteristics. The activation mechanism and related polymerization mechanism remain elusive, despite extensive industrial and academic research. Here, we show that by varying the type and amount of metal-alkyl co-catalyst, we can tailor polymer properties around a single Cr/SiO 2 Phillips catalyst formulation. Furthermore, we show that these different polymer properties exist in the early stages of polymerization. We have used conventional polymer characterization techniques, such as size exclusion chromatography (SEC) and 13 C NMR, for studying the metal-alkyl co-catalyst effect on short-chain branching (SCB), long-chain branching (LCB) and molecular weight distribution (MWD) at the bulk scale. In addition, scanning transmission X-ray microscopy (STXM) was used as a synchrotron technique to study the PE formation in the early stages: allowing us to investigate the produced type of early-stage PE within one particle cross-section with high energy resolution and nanometer scale spatial resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Single Atom Catalysts: A Review of Characterization Methods

Abstract Single atom catalysts (SACs) harbor a potential to exceed nanoparticle catalysts in terms of activity, stability and selectivity in a growing number of chemical reactions. Although their investigation is attracting significant attention, important fundamental questions focusing on key physicochemical properties of SACs (e. g., structure – property relationships, structural dynamics, reaction‐driven restructuring) remain unanswered. A main challenge for research in the field is how to reliably characterize the environments of single atoms in the presence of complicating factors such as low weight loadings, strong metal‐support interactions, and atomic and multiscale heterogeneity of bonding in the single atom sites. This review addresses this challenge – identifying catalytically relevant features of physicochemical properties of single atoms (charge state, electronic structure, atomic configuration, bonding interactions with a support) and surveying advanced tools/methods for characterizing them. The review places a strong emphasis on multimodal methods exploiting X‐ray absorption, emission and photoelectron spectroscopies, and provides several examples from the authors’ research that demonstrate their use as powerful tools for SAC characterization.

Kottwitz, Matthew↗
DOE OSTI2018

The Absence and Importance of Operando Techniques for Metal-Free Catalysts

Operando characterization techniques have played an important role in modern technological developments. In contrast to the experimental uncertainties introduced by ex situ techniques, the simultaneous measurement of desired sample characteristics and near-realistic electrochemical testing provides a representative picture of the underlying physics. From Li-ion batteries to metal-based electrocatalysts, the insights offered by real-time characterization data have enabled more efficient research programs. As an emerging class of catalyst, much of the mechanistic understanding of metal-free electrocatalysts continues to be elusive in comparison to their metal-based counterparts. Yet, there is a clear absence of operando characterization performed on metal-free catalysts. Through the proper execution of operando techniques, it can be expected that metal-free catalysts can achieve exceptional technological progress. Here, the motivation of using operando characterization techniques for metal-free carbon-based catalyst system is considered, followed by a discussion of the possibilities, difficulties and benefits of their applications.

36 MATERIALS SCIENCE↗
NASA NTRS2021

Analytical Methods and Testbeds for Characterizing Adsorbents and Catalysts for Atmosphere Revitalization of Crewed Spacecraft

Spacecraft environmental control and life support systems (ECLSS) include a number of air revitalization (AR) technologies to provide breathable air and a comfortable living environment to the crew. Crew health and comfort is ensured by controlling human produced CO2 (1 kg person-1 day-1) and water vapor (~2 kg person-1 day-1), and by removing trace contaminants (TCs) from cabin air. These life support functions on-board the International Space Station (ISS) are carried out by the Carbon Dioxide Removal Assembly (CDRA), the Water Processor Assembly (WPA), and the trace contaminant control system (TCCS). During the development of the TCCS, new analytical and theoretical methods were developed in the 1970s for characterizing adsorption and desorption characteristics of activated carbons for the purpose of designing suitable AR technologies required for controlling airborne trace contaminants within spacecraft cabins during long exploration missions. The TCCS removes harmful volatile organic compounds and other trace contaminants from the circulating air. It consists of a granular activated carbon (GAC) bed for the removal of high molecular weight contaminants and ammonia followed by a heated catalytic bed for low molecular weight hydrocarbons. The high temperature catalytic oxidizer (HTCO) of the TCCS, which operates at 400°C and requires 120W average power, removes low molecular weight compounds such as carbon monoxide (CO), formaldehyde (CH2O), and methane (CH4), that pass through the GAC bed. The Air Revitalization Laboratory at the Kennedy Space Center (KSC) was established to develop new analytical methods for evaluating emerging ECLSS technologies for use in future AR architectures. General properties of adsorbents and catalysts are required for trace contaminant control system design calculations and vendor-supplied data are seldom available at relevant process conditions of interest to spacecraft cabin applications. To address this shortcoming, appropriate testbeds were developed to measure the desired properties of AR technologies being considered for use in ECLS architectures. Generally, the testbeds developed at KSC challenge the test media (activated carbon, impregnated activated carbon, catalysts, zeolites, solid amines, or pleated filters) with simulated spacecraft gas streams containing representative mixtures of trace contaminants (volatile organic compounds, ammonia, CO, CO2, or siloxanes) at the flow rates, temperatures, and relative humidity that will be encountered within manned spacecraft. Work performed at KSC funded by NASA’s Advanced Exploration (AES) Program has included: Identifying candidate sorbents to replace commercially obsolete impregnated carbons for NH3 control within the TCCS, characterizing their adsorptive capacities using simulated spacecraft gas streams, and ranking their appropriateness in various AR applications; evaluating novel low temperature catalysts for controlling CO and formaldehyde by traditional and photocatalytic methods for trace contaminant control; development of analytical methods to assess regenerable solid amine performance for CO2 control via pressure swing adsorption. The Air Revitalization lab was also funded to study trace contaminant control by other NASA programs. These include: screening of candidate sorbents for the design of new Charcoal HEPA Integrated Particle Scrubber (CHIPS) filters for removing siloxanes from cabin air; characterizing the performance of an impregnated activated carbon at low humidity for use in ORION ECLS; screening of sorbents for protecting the Sabatier 2.0 catalyst from DMSO2, siloxanes, NH3, and solid amine byproducts.

Monje, Oscar↗
DOE OSTI2022

Atomic-scale characterization of (electro-)catalysts and battery materials by atom probe tomography

To optimise the performance of heterogeneous (electro-)catalysts and battery electrodes, it is essential to establish the structure-property relationships. This can only be achieved by obtaining a full three-dimensional (3D) characterisation of atomic-scale structure and chemistry of these advanced materials. Atom probe tomography (APT) can provide unique insights into 3D elemental distribution, including low atomic mass elements, with sub-nanometer spatial resolution. Despite its superior chemical analytical capability and spatial resolution, APT has limited applications for sustainable energy materials due to technical and analytical challenges. The recent developments in experimental setups, sample preparation methods and data analysis algorithms have opened the door to the possibility of analysing heterogeneous (electro-)catalysts and battery electrodes. This perspective provides an overview of these developments, exemplified by recent achievements of analyzing model heterogeneous model (electro-)catalysts, nanoparticles, zeolites, MOFs and Li-ion battery electrodes, followed by a discussion of limitations, opportunities, and potentials of APT for future scientific exploration.

atom probe tomography↗
DOE OSTI2019

Replication Data for: Nanoscale crystallographic characterization of nanoporous catalyst by TKD

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗