Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binding energy difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Stability and structure of metal clusters - Be(13) and Be(55)

Face-centered cubic (fcc) and hexagonally close-packed (hcp) structures are compared for Be(13) and Be(55) clusters. Both Be(13) and Be(55) prefer the fcc structure over the bulk hcp structure, but the energy difference per atom decreases for Be(55) relative to Be(13). The binding energy per atom, 1.3 eV for Be(55) and 0.8-0.9 eV for Be(13), reflects the greater total number of bonds in the larger cluster rather than a difference in bonding. The energies per bond are much more similar, in the range of 0.30-0.34 eV for both clusters. The size of the p-basis set used influences both stability and ionization potentials strongly.

Pettersson, Lars G. M.↗
DOE OSTI2025

Microstructure‐Dependent Sodium Storage Mechanisms in Hard Carbon Anodes

Sustainable energy storage is essential to support the transition to renewables and meet the increasing demand for energy. Sodium‐ion batteries (NIBs) are attractive for grid‐scale energy storage due to the abundance and low cost of sodium, sustainability of other battery components, and electrochemical performance. Hard carbon (HC) is a leading anode material for NIBs, but its complex microstructure complicates the understanding of sodium storage mechanisms. Using X‐ray total scattering and density functional theory calculations, this study clarifies how HC's microstructural variations influence sodium storage across the slope (high potential) and plateau (low potential) regions of the potential capacity curve. In the slope region, sodium initially adsorbs at high‐binding energy defect sites and subsequently intercalates between graphene layers, adsorbing at low‐binding energy defect sites, correlating with different slopes observed during initial sodiation. Initial irreversibility arises from sodium trapping at surface defects and solid electrolyte interface formation. In the plateau region, sodium simultaneously intercalates and fills pores, influenced by pore size, interlayer spacing, and defect concentration. HCs with larger pore sizes form larger sodium clusters. In conclusion, the proposed mechanism underscores the role of microstructure engineering in enhancing HC performance and advancing NIBs for grid‐scale energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Grand Challenges and Opportunities in Stimulated Dynamic and Resonant Catalysis

Traditional heterogeneous catalysis is constrained by kinetic and thermodynamic limits, such as the Sabatier principle and reaction equilibrium. Dynamic and resonant catalysts hold promise to overcome these limitations by actively oscillating a catalyst’s physical or electronic structure at the time scale of the catalytic cycle, allowing programmable control over reaction pathways, and leading to improved rate and selectivity. External stimuli such as temperature swing, mechanical strain, electric charge, and light can perturb catalyst surfaces in different ways, altering adsorbate coverage, binding energies, and transition states beyond what steady-state catalysis allows. This work surveys the current state of dynamic catalysis, introduces the concept of “ stimulando ” characterization for observing transient dynamics, and outlines key modeling, mechanistic, and benchmarking strategies to advance the field toward improved chemical transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Extended Fayans energy density functional: optimization and analysis

The Fayans energy density functional (EDF) has been very successful in describing global nuclear properties (binding energies, charge radii, and especially differences of radii) within nuclear density functional theory. In a recent study, supervised machine learning methods were used to calibrate the Fayans EDF. Building on this experience, in this work we explore the effect of adding isovector pairing terms, which are responsible for different proton and neutron pairing fields, by comparing a 13D model without the isovector pairing term against the extended 14D model. At the heart of the calibration is a carefully selected heterogeneous dataset of experimental observables representing ground-state properties of spherical even–even nuclei. To quantify the impact of the calibration dataset on model parameters and the importance of the new terms, we carry out advanced sensitivity and correlation analysis on both models. The extension to 14D improves the overall quality of the model by about 30%. The enhanced degrees of freedom of the 14D model reduce correlations between model parameters and enhance sensitivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Imaging Anisotropic Waveguide Exciton Polaritons in Tin Sulfide

In recent years, novel materials supporting in-plane anisotropic polaritons have attracted a great deal of research interest due to their capability of shaping nanoscale field distributions and controlling nanophotonic energy flows. Here we report a nano-optical imaging study of waveguide exciton polaritons (EPs) in tin sulfide (SnS) in the near-infrared (near-IR) region using scattering-type scanning near-field optical microscopy (s-SNOM). With s-SNOM, we mapped in real space the propagative EPs in SnS, which show sensitive dependence on the excitation energy and sample thickness. Moreover, we found that both the polariton wavelength and propagation length are anisotropic in the sample plane. In particular, in a narrow spectral range from 1.32 to 1.44 eV, the EPs demonstrate quasi-one-dimensional propagation, which is rarely seen in natural polaritonic materials. Here, a further analysis indicates that the observed polariton anisotropy originates from the different optical band gaps and exciton binding energies along the two principal crystal axes of SnS.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Understanding the origin of structure sensitivity in hydrodechlorination of trichloroethylene on a palladium catalyst

Periodic density functional theory (DFT) calculations are employed to understand the origin of structure sensitivity in hydrodechlorination (HDC) of trichloroethylene (TCE) over different facets of a palladium catalyst. The HDC reaction is simulated on the terrace (Pd (111) and Pd (100)) and undercoordinated (Pd (211) and Pd (110)) sites of the Pd catalyst. The most stable binding configuration of TCE on the Pd surfaces is observed to be through the di-σ mode of binding, wherein each carbon atom of the TCE molecule is adsorbed atop of the Pd atom. On comparing TCE adsorption over different facets of Pd, a maximum binding energy of –178 kJ mol –1 is calculated over the Pd (110) surface. TCE, upon adsorption on Pd catalyst, undergoes dechlorination followed by hydrogenation of the hydrocarbon intermediates. The activation energies for C–Cl bond dissociation steps are significantly low when compared to the hydrogenation steps. The chlorine released from dechlorination tends to block the active sites, thereby poisoning the surface with high binding energies (B.E > –160 kJ mol –1 ) on all the surfaces. The trend in chlorine binding energies on Pd facets follows: Pd (110) > Pd (211) > Pd (100) > Pd (111). The removal of surface chlorine is facilitated by its reaction with surface hydrogen to form hydrogen chloride. The activation energy for hydrogen chloride formation is calculated to be 90 kJ mol –1 and 88 kJ mol –1 on Pd (111) and Pd (100) terrace sites, respectively and 109 kJ mol –1 and 118 kJ mol –1 on the step Pd (211) and corrugated Pd (110) facets, respectively. This suggests the ease of removal of Cl as HCl from the terrace sites as compared to the step and corrugated sites. The structure sensitivity in the TCE HDC reaction could possibly arise due to the differences in the energetics of Cl removal on different Pd facets. As a result, this mechanistic understanding could provide a rationale for designing suitable catalysts for the HDC of TCE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Theoretical Study of Fe(CO)n-

The structures and CO binding energies are computed for Fe(CO)n- using a hybrid density functional theory (DFT) approach. The structures and ground states can be explained in terms of maximizing the Fe to CO 2pi* donation and minimizing Fe-CO 5 sigma repulsion. The trends in the CO binding energies for Fe(CO)n- and the differences between the trends for Fe(CO)n- and Fe(CO)n are also explained. For Fe(CO)n-, the second, third, and fourth CO bonding energies are in good agreement with experiment, while the first is too small. The first CO binding is also too small using the coupled cluster singles and doubles approach including a perturbation estimate of the connected triple excitations.

Ricca, Alessandra↗
DOE OSTI2022

Real- and momentum-space description of the excitons in bulk and monolayer chromium tri-halides

Excitons with large binding energies ~2–3 eV in CrX 3 have been characterized as being localized (Frenkel) excitons that emerge from the atomic d – d transitions between the Cr-3d-t 2g and e g orbitals. The argument has gathered strength in recent years as the excitons in recently made monolayers are found at almost the same energies as the bulk. The Laporte rule, which restricts such parity forbidden atomic transitions, can relax if a symmetry-breaking mechanism is present. While what can be classified as a purely Frenkel exciton is a matter of definition, we show using an advanced first principles parameter-free approach that these excitons in CrX 3 , in both its bulk and monolayer variants, have band origin and it is the dp hybridization between Cr and X that primarily acts as the symmetry-breaking mechanism that relaxes the Laporte rule. We show that the character of these excitons is mostly determined by the Cr-d orbital manifold, nevertheless, the fractions of the spectral weight shared with the ligand halogen states increases as the dp hybridization enhances. The hybridization enhances as the halogen atom becomes heavier, bringing the X-p states closer to the Cr-d states in the sequence Cl → Br → I, with an attendant increase in exciton intensity and a decrease in binding energy. By applying a range of different kinds of perturbations that qualitatively mimics the effects originating from the missing vertex in self-energy, we show that moderate changes to the two-particle Hamiltonian that essentially modifies the Cr-d-X-p hybridization, can alter both the intensities and positions of the exciton peaks. A detailed analysis of several deep-lying excitons, with and without strain, elucidates the fact that the exciton is most Frenkel-like in CrCl 3 and CrBr 3 and acquires mixed Frenkel–Wannier character in CrI 3 , making the excitons in CrI 3 most susceptible to environmental screening and spin–orbit coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

New insight into knockout reactions from the two-proton halo nucleus 17 Ne

The unexplained disagreement in the dependence of spectroscopic factors (𝐶2⁢𝑆 exp ) on the binding energy obtained by nucleon knockout using different targets is still a puzzle that needs to be addressed. To find an explanation of this riddle through exclusive measurements using different targets. The exclusive measurements were performed by using a 17 Ne beam with an energy of 500 MeV/u incident on C and CH 2 targets. Through the standard theoretical approach, 𝐶 2⁢ 𝑆 exp were derived from the analysis of the experimental data on proton ejection from the proton halo in 17 Ne as well as from its core 15 O. For the C target, proton ejection from the proton halo gave 𝐶 2 ⁢𝑆 exp about 37% smaller than for the H target. But when protons are ejected from the core of 17 Ne, 𝐶 2 ⁢𝑆 exp are identical within statistical uncertainties. An explanation for the difference in 𝐶 2 ⁢𝑆 exp could be the removal of both halo protons, a more important reaction pathway for the C target. The 𝐶 2 ⁢𝑆 exp values obtained by analyzing the proton ejection from the core indicate that it is not affected by the interaction with the halo protons.

6 ≤ A ≤ 19↗
DOE OSTI2023

Material Effects on Electron-Capture Decay in Cryogenic Sensors

Several current searches for physics beyond the standard model are based on measuring the electron-capture (EC) decay of radionuclides implanted into cryogenic high-resolution sensors. The sensitivity of these experiments has already reached the level where systematic effects related to atomic state energy changes from the host material are a limiting factor. One example is a neutrino mass study based on the nuclear EC decay of 7 Be to 7 Li inside cryogenic Ta-based sensors. Here, to understand the material effects at the required level, we use density-functional theory to model the electronic structure of lithium atoms in different atomic environments of the polycrystalline Ta absorber film. The calculations reveal that the Li 1s binding energies can vary by more than 2 eV due to insertion at different lattice sites, at grain boundaries, in disordered Ta, and in the vicinity of various impurities. However, the total range of Li 1s shifts does not exceed 4 eV, even for extreme amorphous disorder. Furthermore, when investigating the effects on the Li 2s levels, we find broadening of more than 5 eV due to hybridization with the Ta band structure. Material effects are shown to contribute significantly to peak broadening in Ta-based sensors that are used to search for physics beyond the standard model in the EC decay of 7 Be, but they do not explain the full extent of observed broadening. Understanding these in-medium effects will be required for current- and future-generation experiments that observe low-energy radiation from the EC decay of implanted isotopes to evaluate potential limitations on the measurement sensitivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic-Scale Simulations on Graphene Bending Near a Copper Surface

Molecular insights into graphene-catalyst surface interactions can provide useful information for the efficient design of copper current collectors with graphitic anode interfaces. As graphene bending can affect the local electron density, it should reflect its local reactivity as well. Using ReaxFF reactive molecular simulations, we have investigated the possible bending of graphene in vacuum and near copper surfaces. We describe the energy cost for graphene bending and the binding energy with hydrogen and copper with two different ReaxFF parameter sets, demonstrating the relevance of using the more recently developed ReaxFF parameter sets for graphene properties. Moreover, the draping angle at copper step edges obtained from our atomistic simulations is in good agreement with the draping angle determined from experimental measurements, thus validating the ReaxFF results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Aggregation of Size-Selected Oxide Clusters Deposited onto Au(111)

Kinetic Monte Carlo (kMC) simulations along with density functional theory (DFT) calculations were used to investigate the aggregation of size-selected Nb 3 O y (y = 5, 6, 7) clusters deposited onto the Au(111) surface. Recent STM experiments showed that the cluster binding sites and sizes of the cluster assemblies on the Nb 3 O y /Au(111) surfaces strongly depend on the stoichiometry of the clusters, i.e., the oxygen-to-niobium ratio. To better understand the origins of these differences, kMC simulations of the nucleation and growth of cluster assemblies were performed using energy barriers for diffusion and intercluster interactions estimated from DFT calculations of cluster binding and dimerization energies, respectively. Comparisons of the kMC simulations with STM images of the as-deposited Nb 3 O y /Au(111) surfaces at RT and after high temperature annealing were used to further optimize the energetics and gauge the importance of nearest neighbor interactions. The kMC simulations demonstrate that the assembly of Nb 3 O y clusters on Au(111) are largely controlled by the magnitude of the barriers for diffusion and interparticle-bond formation, while changes at higher temperatures are sensitive to the binding energies between nearest neighbors. Simulations for the Nb 3 O 5 and Nb 3 O 6 clusters, which exhibit smaller cluster assembly sizes in STM, required larger diffusion barriers as well as different barriers for interparticle binding, which reflected differences in DFT calculated dimerization energies. Furthermore, the results demonstrate the effectiveness of combined DFT and kMC calculations for understanding how the stoichiometry affects the aggregation of small oxide clusters on a metal surface.

36 MATERIALS SCIENCE↗
NASA NTRS1996

The Successive OH Binding Energies of Sc(OH)n+ for n=1-3

The geometries of Sc(OH)n+, for n = 1-3, have been optimized using density functional theory, in conjunction with the B3LYP hybrid functional. The zero-point energies are computed at the same level of theory. The successive OH bond energies have been computed at the CCSD(T) level for ScOH+ and Sc(OH)2+. The computed result for ScOD+ is in excellent agreement with the recent experiment of Armentrout and co-workers. There is a dramatic drop for the third OH, because Sc+ has only two valence electrons and therefore the bonding changes when the third OH is added. The difference between the B3LYP and CCSD(T) OH binding energies for the first two OH groups is discussed.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2020

Ultrafast nonequilibrium evolution of excitonic modes in semiconductors

We study the time evolution of excitonic states after photoexcitation in the one-dimensional spinless extended Falicov-Kimball model. Several numerical methods are employed and benchmarked against each other: time-dependent mean-field simulations, the second-Born approximation (2BA) within the Kadanoff-Baym formalism, the generalized Kadanoff-Baym ansatz (GKBA) implemented with the 2BA, and the infinite time-evolving block decimation (iTEBD) method. It is found that the GKBA gives the best agreement with iTEBD and captures the relevant physics. Excitations to the particle-hole continuum and resonant excitations of the equilibrium exciton result in a qualitatively different dynamics. In the former case, the exciton binding energy remains positive and the frequency of the corresponding coherent oscillations is smaller than the band gap. On the other hand, resonant excitations trigger a collective mode whose frequency is larger than the band gap. We discuss the origin of these different behaviors by evaluating the nonequilibrium susceptibility using the nonthermal distribution and a random phase approximation. We note the peculiar mode with frequency larger than the band gap is associated with a partial population inversion with a sharp energy cutoff. We also discuss the effects of the cooling by a phonon bath. We demonstrate the real-time development of coherence in the polarization, which indicates excitonic condensation out of equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effect of 60 Co Irradiation on Boehmite Dissolution in Caustic Solutions

Here, in this work, we examine how radiation impacts the dissolution behavior of boehmite by subjecting dry nanoparticles of different sizes to 60 Co γ radiation and subsequently analyzing their dissolution behavior in caustic solutions as a function of temperature. The measured kinetics show that irradiation with an amount 228.24 Mrad significantly slows the dissolution rate, particularly for smaller sizes at lower temperatures. Specifically, the temperature-dependent dissolution rates of irradiated 20 nm boehmite versus pristine material in 3 M NaOH solutions were several times lower (e.g., rate constant of 0.026 vs 0.075 h –1 at 60 °C), with an apparent activation energy 40 kJ mol –1 higher. Although various imaging techniques and X-ray diffraction measurements consistently revealed no obvious differences between pristine and irradiated samples, after irradiation significant binding energy shifts were detected in the X-ray photoelectron Spectroscopy peaks of Al 2p and O 1s, and a change in their relative intensities indicated a lower O/Al ratio. This suggests that γ-irradiation may stabilize boehmite particle surfaces by driving their chemistry and structure toward more stable aluminum oxide forms. This finding may help explain slower dissolution rates of boehmite in nuclear waste and may be useful for the development of more robust predictive models and effective strategies for waste processing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Information content of the differences in the charge radii of mirror nuclei

Differences in the charge radii of mirror nuclei have been recently suggested to contain information on the slope of the symmetry energy L. To test this hypothesis, we perform statistical correlation analysis using quantified energy density functionals that are consistent with our previous knowledge on global nuclear observables such as binding energies and charge radii. We conclude that the difference in charge radii between a mirror pair, $ΔR$$^{mir}_{ch}$, is an inferior isovector indicator compared to other observables, such at the neutron skin or electric dipole polarizability α D . In particular, this quantity correlates poorly with both the neutron skin and L. Here, we demonstrate that $ΔR$$^{mir}_{ch}$ is influenced by pairing correlations in the presence of low-lying proton continuum in the proton-rich mirror-partner nucleus. Considering the large theoretical uncertainties on $ΔR$$^{mir}_{ch}$, we conclude that the precise data on mirror charge radii cannot provide a stringent constraint on L.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Spectroscopy of the T = 2 mirror nuclei 48 Fe/ 48 Ti using mirrored knockout reactions

A sequence of excited states has been established for the first time in the proton-rich nucleus 48 Fe (Z=26, N=22). The technique of mirrored (i.e. analogue) one-nucleon knockout reactions was applied, in which the T z = ±2 mirror pair, 48 Fe/ 48 Ti were populated via one-neutron/one-proton knockout from the secondary beams 49 Fe/ 49 V, respectively. The analogue properties of the reactions were used to help establish the new level scheme of 48 Fe. The inclusive and exclusive cross sections were determined for the populated states. Large differences between the cross sections for the two mirrored reactions were observed and have been interpreted in terms of different degrees of binding of the mirror nuclei and in the context of the recent observations of suppression of spectroscopic strength as a function of nuclear binding, for knockout reactions on light solid targets. Mirror energy differences (MED) have been determined between the analogue T = 2 states and compared with the shell model predictions. MED for this mirror pair, due to their location in the shell, are especially sensitive to excitations out of the f 7/2 shell, and present a stringent test of the shell-model prescription.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Binding mechanism and binding free energy of amino acids and citrate to hydroxyapatite surfaces as a function of crystallographic facet, pH, and electrolytes

Hydroxyapatite (HAP) is the major mineral phase in bone and teeth. The interaction of individual amino acids and citrate ions with different crystallographic HAP surfaces has remained uncertain for decades, creating a knowledge gap to rationally design interactions with peptides, proteins, and drugs. In this contribution, we quantify the binding mechanisms and binding free energies of the 20 end-capped natural amino acids and citrate ions on the basal (001) and prismatic (010)/(020) planes of hydroxyapatite at pH values of 7 and 5 for the first time at the molecular scale. We utilized over 1500 steered molecular dynamics simulations with highly accurate potentials that reproduce surface and hydration energies of (hkl) hydroxyapatite surfaces at different pH values. Charged residues demonstrate a much higher affinity to HAP than charge-neutral species due to the formation of superficial ion pairs and ease of penetration into layers of water molecules on the mineral surface. Binding free energies range from 0 to -60 kJ/mol and were determined with ~10% uncertainty. The highest affinity was found for citrate, followed by Asp(-) and Glu(-), and followed after a gap by Arg(+), Lys(+), as well as by His(+) at pH 5. The (hkl)-specific area density of calcium ions, the protonation state of phosphate ions, and subsurface directional order of the ions in HAP lead to surface-specific binding patterns. Amino acids without ionic side groups exhibit weak binding, between -3 and 0 kJ/mol, due to difficulties to penetrate the first layer of water molecules on the apatite surfaces. We explain recognition processes that remained elusive in experiments, in prior simulations, discuss agreement with available data, and reconcile conflicting interpretations. In conclusion, the findings can serve as useful input for the design of peptides, proteins, and drug molecules for the modification of bone and teeth-related materials, as well as control of apatite mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗