Results for “best practice” — Page 4

DOE OSTI2024

Best Practices for Plug Load Management Using a Building Energy Management System

The University of California San Diego (UCSD) successfully integrated PLCs with their BEMS, which resulted in 66% energy savings over one week across 25 plug loads (K. Chia et al. 2023). UCSD documented each step of this effort, highlighting best practices along the way, in their 10-page brief, "Best Practices for Plug Load Management Using a Building Energy Management System" (also referred to as "brief" in this document). This fact sheet provides highlights and key takeaways from UCSD's brief. The reader is encouraged to read UCSD's full brief if they wish to move forward with implementing PLC integration with their BEMS.

Building Energy Management System Integration↗

NASA NTRS2016

CSW Best Practices

During the development of the CMR (Common Metadata Repository) (CMR) for the Earth Observing System Data and Information System (EOSDIS), CSW (Catalog Service for the Web) a number of best practices came to light. Given that the ESIP (Earth Science Information Partners) Discovery Cluster is committed to interoperability and standards in earth data discovery this seemed like a convenient moment to provide Best Practices to the organization in the same way we did for OpenSearch for this widely-used standard.

CMR↗

DOE OSTI2023

Distributed Wind Certification Best Practices Guideline: January 16, 2023 - January 15, 2026

This Distributed Wind (DW) Certification Best Practices Guideline describes the typical approach for certification of distributed wind turbines above and below 150 kilowatts (kW) in size based on the conformity assessment requirements in the United States. The purpose of the guideline is to clarify and consistently describe the path to certification for various systems and components by helping the user navigate the complex path to certification compliance. This is done via clarification of both the required turbine type certification elements, as well as third-party electrical safety listing of turbine system components and subassemblies. In the United States specifically, there is no wind turbine certification scheme that governs or maintains a consistent set of conformity assessment requirements, and this can lead to wide ranging interpretations of the standards and required elements for certifications. This guideline attempts to simplify the path by organizing the information and guiding the user to the applicable set of requirements. Any wind turbine manufacturer or designer of wind turbines used in distributed generation applications in the United States would find value in the conformity assessment guidance in this guideline. Users are expected to be involved in the technical development of the product and supporting documentation, as the details provided are geared towards electrical and mechanical engineering of the system and components.

17 WIND ENERGY↗

DOE OSTI2020

Consensus International Solar Resource Standards and Best Practices Development

This presentation provides an overview of consensus international solar resource standards and best practices development.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2022

Community Energy Planning: Best Practices and Lessons Learned in NREL's Work with Communities

The clean energy transition is accelerating due to local, state, and national actions combined with external market forces. Regardless of where goals are set and decisions are made, clean energy deployment occurs on the ground in communities. As a result, communities increasingly need technical expertise and assistance with planning for and managing the energy transition. Building on decades of work with state, local, and tribal jurisdictions, the National Renewable Energy Laboratory (NREL) increasingly provides community-driven modeling, analysis, and technical assistance to enable more data-driven and equitable community energy planning. To inform and enhance NREL's capabilities in community energy planning and provide a resource for others working in this space, the Joint Institute for Strategic Energy Analysis (JISEA) Sustainable Communities Catalyzer supported this best-practices presentation based on interviews with seasoned NREL practitioners and a literature review on equitable community energy planning. Findings include five best practices for community energy planning that NREL practitioners and others can apply to strengthen their impact: 1) do your homework in preparation for community interactions; 2) be humble, authentic, and honest in your interactions with community members; 3) respect community agency in every step of the process; 4) meet the community where they are; 5) democratize participation.

best practices↗

NASA NTRS2007

GN&C Engineering Best Practices For Human-Rated Spacecraft Systems

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

Dennehy, Cornelius J.↗

NASA NTRS2007

GN&C Engineering Best Practices for Human-Rated Spacecraft Systems

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

Dennehy, Cornelius J.↗

NASA NTRS2008

GN&C Engineering Best Practices for Human-Rated Spacecraft System

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

Dennehy, Cornelius J.↗

DOE OSTI2024

WETO Software Stack Best Practices

Wind energy researchers typically share one key characteristic: a passion for increasing wind energy in the global energy mix. The U.S. Department of Energy (DOE) supports this mission in a number of ways including allocating funding directly to various aspects of wind energy research through the Office of Energy Efficiency and Renewable Energy (EERE) via the Wind Energy Technologies Office (WETO). While the traditional output of research is academic publication, software development efforts are increasingly a major focus. Software tools in the research environment allow researchers to describe an idea and quickly increase the scope and scale as they study it further. As a product of research, these tools represent a direct pipeline from researcher to industry practitioners since they are the implementation of ideas described in academic publications. Given this vital role in wind energy research and commercial development, the broad research software portfolio supported by WETO must maintain a minimum level of quality to support the wind energy field in the growing transition to renewable energy. This report outlines a series o f best practices to be adopted by all WETO-supported software projects, as well as expectations that the communities interacting with these projects should have of the developers and tools themselves. Wind energy research software has a unique standing in the field of scientific software. The stakeholders are varied with a subset being: (1) DOE EERE leadership, (2) DOE WETO leadership and program managers, (3) National lab leadership, (4) Associated project principle investigators, (5) Research software engineers, (6) Wind energy researchers in academia (including graduate students, post docs, and national lab staff), (7) Industry researchers and practitioners, (8) Commercial software developers, and (9) The general public interested in wind energy. These software are typically the end-user of other generic software libraries, so the funding cycles are often tied to applied research rather than the development of the software itself. Since the developers are also wind energy researchers, these tools are typically designed in a way that closely resembles the application in which they're used. Additionally, the expertise and incentives for the developers have a high variability, and often neither are aligned with software engineering or computer science. Given the unique environment in which wind energy research software is produced and consumed, it is critical for model owners to understand the context of their software. A framework for developing this understanding is to answer the following questions of a given software project: What is it's purpose? What is its role in the field of wind energy? What is the profile of the expected users? For how long will it be relevant? What is the expected impact? These questions allow model owners to identify the appropriate methods for the design, development, and long term maintenance of their software. Additionally, the answer provide context for future planners to understand why particular decisions were made and discern the consequences of changing course. The information is aggregated from experience within WETO-supported software development groups as well as external organizations and efforts to define the craft of research software engineering. These best practices aim to make the collaborative development process efficient and effective while improving the model understanding across stakeholders. Additionally, the general adoption of a common framework for software quality ensures that the end users of WETO software can trust these tools and accurately understand the risks to workflow integration.

17 WIND ENERGY↗

DOE OSTI2025

Best Practices for Grid Communications

As the grid evolves, the communications architecture will need to evolve with it. That architecture affords a structured means by which the evolving complexities of the modern electric grid can be managed. This document provides best practices that can be implemented in the grid of today and evolve towards the grid and grid architecture of the future. The evolving grid and its control communications increasingly rely on commercial communications providers and a variety of technologies, from wireless (e.g., 5G, microwave, Wi-Fi) to wireline (fiber, copper) to radio communications (P25, other repeater-based systems), and all these communications systems rely on electric power. A reliable and resilient grid must account for this complex set of interdependencies in its planning activities, especially those involving restoration and recovery. The participation of all relevant parties in both planning and exercising of plans can prevent unexpected conditions that impede the reliable operation and recovery of the grid. Best practices for grid communications include using a Network Management System to document the operational state, define and monitor baselines, detect changes, and accelerate response to abnormalities. If transitioning from SONET to IP/packet-based systems, translating grid requirements into communications requirements for latency, bandwidth and throughput, IP packet delay variation, packet loss, and availability should inform and drive technology planning and selection as well as that communication system’s Quality of Service (QoS) policies and Service Level Agreements (SLAs). Secure and reliable timing is another key component of a reliable and resilient grid that can operate through adverse events. A trusted internal NTP configuration, an integrated and diverse timing delivery system, optimizing the timing architecture based on the transport technologies of the communications system, and using established standards can deliver the level of timing accuracy required by a range of time-sensitive power system applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

Communication of industry knowledge, best practices, and lessons learned in the space of cellulosic biofuels plant design, project development and execution and operations. Task 1 report

ExxonMobil Research and Engineering Company, via a technical services agreement, engages Idaho National Laboratory (INL) to provide general industry knowledge, best practices, and lessons learned in cellulosic ethanol plant design, project execution, and operations. INL will also assess publicly proposed cellulosic plant designs. The scope of work will be accomplished in three tasks: Task 1, Communicate industry knowledge; Task 2, Present high-level lessons learned; Task 3, Provide an engineering assessment of publicly proposed ethanol plant designs. This Task 1 report provides a high-level summary of general industry knowledge, best practice, and lessons learned in biomass feedstock logistics and integration with bioconversion processes.

09 BIOMASS FUELS↗

DOE OSTI2022

Energy Management Information Systems Cybersecurity Best Practices

Energy management information systems (EMIS) are a broad and rapidly evolving family of tools that monitor, analyze, and control building energy use and system performance. Critical systems are often integrated with or operate on the same networks as EMIS scope systems, necessitating stable, continuous, and secure communication. When connecting EMIS to building automation and utility control systems, there are also many physical assets that could cause harm to the building and its occupants if a malicious act or human error were introduced. It is imperative to ensure all EMIS scope systems are connected securely to the EMIS and do not open vulnerable pathways to other facility networks and operations. The Federal Energy Management Program (FEMP) promotes best practices for impactful utilization of EMIS at federal facilities. This best practice document is part of a series of fact sheets created to help accelerate the market adoption and use of EMIS in the federal sector. It provides an overview of required EMIS cybersecurity standards for compliance and authority to operate along with additional recommendations.

cybersecurity↗

DOE OSTI2022

Energy Management Information Systems Cybersecurity Best Practices

Energy management information systems (EMIS) are a broad and rapidly evolving family of tools that monitor, analyze, and control building energy use and system performance. Critical systems are often integrated with or operate on the same networks as EMIS scope systems, necessitating stable, continuous, and secure communication. When connecting EMIS to building automation and utility control systems, there are also many physical assets that could cause harm to the building and its occupants if a malicious act or human error were introduced. It is imperative to ensure all EMIS scope systems are connected securely to the EMIS and do not open vulnerable pathways to other facility networks and operations. The Federal Energy Management Program (FEMP) promotes best practices for impactful utilization of EMIS at federal facilities. This best practice document is part of a series of fact sheets created to help accelerate the market adoption and use of EMIS in the federal sector. It provides an overview of required EMIS cybersecurity standards for compliance and authority to operate along with additional recommendations.

Cybersecurity↗

DOE OSTI2024

Best Practices for Equitable Solar Workforce Development

The Midwest Renewable Energy Association (MREA) was selected to serve as a lead organization for the U.S. Department of Energy Solar Energy Technology Office’s Equitable Solar Communities of Practice initiative. This project, facilitated through a partnership with ENERGYWERX, aimed to develop strategies to support the expansion of equitable benefits in solar adoption across the U.S. Specifically, the MREA was chosen to lead the solar workforce development community of practice, focusing on scaling the U.S. solar workforce, to meet growing industry demands and ensure that these opportunities are accessible and beneficial to all communities. For the purpose of this initiative, we define the solar workforce in line with the National Solar Jobs Census, which defines a solar worker as someone who spends a majority of their time on solar-related work. This also includes workers who spend a plurality of their time on solar tasks. It’s important to note that manufacturing jobs were not included in this research, as the focus is primarily on solar installation, development, and related roles. To achieve the goals of the Equitable Solar Communities of Practice initiative, the MREA leveraged existing resources and engaged a diverse core team and group of stakeholders including industry professionals, educators, policymakers, and community leaders. The MREA began with a literature review and gap analysis to identify existing best practices and gaps in the solar workforce. This was followed by a community convening to gather insights from a wide range of stakeholders. The findings informed the best practices and pathways to scale the benefits of solar workforce development, focusing on training programs, workforce services, apprenticeship, and justice, inclusion, and sustainability. This report outlines the background, methodology, findings, and conclusions drawn from the landscape and gap analysis, providing valuable insights into workforce needs and training program capacities across the U.S. The outcomes of this research are presented in this report and contain recommendations for optimizing workforce development and training funding to support the equitable growth of the solar industry, ensuring that the transition to solar energy is inclusive and beneficial for all communities.

14 SOLAR ENERGY↗

DOE OSTI2024

Expanding the access of wearable silicone wristbands in community-engaged research through best practices in data analysis and integration

Wearable silicone wristbands are a rapidly growing exposure assessment technology that offer researchers the ability to study previously inaccessible cohorts and have the potential to provide a more comprehensive picture of chemical exposure within diverse communities. However, there are no established best practices for analyzing the data within a study or across multiple studies, thereby limiting impact and access of these data for larger meta-analyses. We utilize data from three studies, from over 600 wristbands worn by participants in New York City and Eugene, Oregon, to present a first-of-its-kind manuscript detailing wristband data properties. We further discuss and provide concrete examples of key areas and considerations in common statistical modeling methods where best practices must be established to enable meta-analyses and integration of data from multiple studies. Finally, we detail important and challenging aspects of machine learning, meta-analysis, and data integration that researchers will face in order to extend beyond the limited scope of individual studies focused on specific populations.

Bramer, Lisa M.↗

DOE OSTI2023

Data to Accompany: Expanding the access of wearable silicone wristbands in community-engaged research through best practices in data analysis and integration

Wearable silicone wristbands are a rapidly growing exposure assessment technology that offer researchers the ability to study previously inaccessible cohorts and have the potential to provide a more comprehensive picture of chemical exposure within diverse communities. However, there are no established best practices for analyzing the data within a study or across multiple studies, thereby limiting impact and access of these data for larger meta-analyses. We utilize data from three studies, from over 600 wristbands worn by participants in New York City and Eugene, Oregon, to present a first-of-its-kind manuscript detailing wristband data properties. We further discuss and provide concrete examples of key areas and considerations in common statistical modeling methods where best practices must be established to enable meta-analyses and integration of data from multiple studies. Finally, we detail important and challenging aspects of machine learning, meta-analysis, and data integration that researchers will face in order to extend beyond the limited scope of individual studies focused on specific populations.

Bramer, Lisa M↗

DOE OSTI2025

Standardization and best practices in single-cell testing for liquid alkaline water electrolysis

The increasing demand for efficient and sustainable hydrogen production has driven significant advancements in water electrolysis technologies. Among these, liquid alkaline water electrolysis (LAWE) stands out for its cost-effectiveness and scalability. This manuscript establishes best practices and standardized testing procedures for single-cell LAWE, focusing on the use of nickel foam as both anode and cathode substrates, while incorporating catalysts such as nickel-iron layered double hydroxide (NiFe-LDH) as the anode material and nickel-molybdenum on carbon (NiMo/C) as the cathode material. By providing detailed guidelines on material preparation, cell assembly, and performance evaluation, this work offers a comprehensive framework to improve reproducibility and ensure consistency. The results demonstrate that applying these best practices minimizes variability across different laboratories and experimental setups, laying the groundwork for more robust comparisons and accelerating progress in LAWE research.

08 HYDROGEN↗

DOE OSTI2022

Communities in energy transition: exploring best practices and decision support tools to provide equitable outcomes

Abstract The U.S. coal industry has been in a state of decline for the past decade, a trend ushered by flat electricity demand, increased regulatory pressure, and market competition from cost-competitive clean energy sources. The receding economic viability of the coal industry has been acutely felt by the communities with immediate economic ties to coal-fired generation. With the energy transition underway, the question of how to engage communities as stakeholders in the decision-making process and address their needs through an equitable and just transition remains unresolved. To that end, this paper explores the economic, environmental, and social challenges presented by the energy transition at the community level, highlighting four case studies from transitioning coal-dependent communities across the United States to ultimately identify best practices in coal plant decommissioning processes. This paper weaves these community-identified best practices into two support tools—a decommissioning checklist and a redevelopment decision-making framework—that can be used to engage communities in the power plant retirement decision, the site reclamation phase, and eventual redevelopment of the site and revitalization of the surrounding community.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗