Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “automatic adjoint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

62 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Development of Fusion Neutronics Methodology, Software, and Testing Facility in FDS Team

Fusion neutronics including methodology, software, experiments, etc. is studied concerning the generation, utilizing and protection of neutrons in fusion facilities. Achievements have been made in the past decades to solve the new problems fusion neutronics. However there is still some way to go such as following. Automatic modeling method based on CAD has been developed to avoid the heavy burden of manual geometry description. The pre-processing costs much time to simplify the CAD model for converting to Constructive Solid Geometry (CSG), 2D or 3D mesh based geometry. This problem has become a new focus. Deep penetration of radiation shielding is notable problem for fusion. Adaptive variance reduction methods such as Consistent Adjoint Driven Importance Sampling (CADIS) were developed to accelerate convergence. However the gap still exists between engineering requirements and current methodology. The geometry simplification, homogenizing based tally, error in nuclear data and error propagation in coupled calculation, etc., causes considerable uncertainty, which leads to 'safety factor' applied in simulation results to achieve required safety margin. It can significantly raise the cost and even makes it impractical to initiate the fusion facilities. Uncertainty qualification, error analysis and error propagation problem should be studied. New methodology and software should be validated. For example the (n,p), (n,a), (n,t) cross section of Cu, Fe, W, Ni which is important for evaluation of material radiation damage is absent. The validation of neutronics properties of special components such as first wall, blanket and coil are needed. The D-T fusion neutron generator can directly represent the neutron environment in fusion reactors. However the neutron yield is several orders of magnitudes lower than requirements. To resolve obstacles in fusion neutronics, broad improvements of methodology, software and testing facility have been achieved by FDS Team in recent years and the main progress was introduced in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Cohesive phase-field fracture and a PDE constrained optimization approach to fracture inverse problems

In recent years there has been a proliferation of modeling techniques for forward predictions of crack propagation in brittle materials, including: phase-field/gradient damage models, peridynamics, cohesive-zone models, and G/XFEM enrichment techniques. However, progress on the corresponding inverse problems has been relatively lacking. Taking advantage of key features of existing modeling approaches, we propose a parabolic regularization of Barenblatt cohesive models which borrows extensively from previous phase-field and gradient damage formulations. An efficient explicit time integration strategy for this type of nonlocal fracture model is then proposed and justified. In addition, we present a C++ computational framework for computing in- put parameter sensitivities efficiently for explicit dynamic problems using the adjoint method. This capability allows for solving inverse problems involving crack propagation to answer interesting engineering questions such as: 1) what is the optimal design topology and material placement for a heterogeneous structure to maximize fracture resistance, 2) what loads must have been applied to a structure for it to have failed in an observed way, 3) what are the existing cracks in a structure given various experimental observations, etc. In this work, we focus on the first of these engineering questions and demonstrate a capability to automatically and efficiently compute optimal designs intended to minimize crack propagation in structures.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2001

Some Advanced Concepts in Discrete Aerodynamic Sensitivity Analysis

An efficient incremental-iterative approach for differentiating advanced flow codes is successfully demonstrated on a 2D inviscid model problem. The method employs the reverse-mode capability of the automatic- differentiation software tool ADIFOR 3.0, and is proven to yield accurate first-order aerodynamic sensitivity derivatives. A substantial reduction in CPU time and computer memory is demonstrated in comparison with results from a straight-forward, black-box reverse- mode application of ADIFOR 3.0 to the same flow code. An ADIFOR-assisted procedure for accurate second-order aerodynamic sensitivity derivatives is successfully verified on an inviscid transonic lifting airfoil example problem. The method requires that first-order derivatives are calculated first using both the forward (direct) and reverse (adjoint) procedures; then, a very efficient non-iterative calculation of all second-order derivatives can be accomplished. Accurate second derivatives (i.e., the complete Hessian matrices) of lift, wave-drag, and pitching-moment coefficients are calculated with respect to geometric- shape, angle-of-attack, and freestream Mach number

Taylor, Arthur C., III↗
DOE OSTI2016

Augmenting the one-shot framework by additional constraints

The (multistep) one-shot method for design optimization problems has been successfully implemented for various applications. To this end, a slowly convergent primal fixed-point iteration of the state equation is augmented by an adjoint iteration and a corresponding preconditioned design update. In this paper we present a modification of the method that allows for additional equality constraints besides the usual state equation. Finally, a retardation analysis and the local convergence of the method in terms of necessary and sufficient conditions are given, which depend on key characteristics of the underlying problem and the quality of the utilized preconditioner.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Differential methods for assessing sensitivity in biological models

Differential sensitivity analysis is indispensable in fitting parameters, understanding uncertainty, and forecasting the results of both thought and lab experiments. Although there are many methods currently available for performing differential sensitivity analysis of biological models, it can be difficult to determine which method is best suited for a particular model. In this paper, we explain a variety of differential sensitivity methods and assess their value in some typical biological models. First, we explain the mathematical basis for three numerical methods: adjoint sensitivity analysis, complex perturbation sensitivity analysis, and forward mode sensitivity analysis. We then carry out four instructive case studies. (a) The CARRGO model for tumor-immune interaction highlights the additional information that differential sensitivity analysis provides beyond traditional naive sensitivity methods, (b) the deterministic SIR model demonstrates the value of using second-order sensitivity in refining model predictions, (c) the stochastic SIR model shows how differential sensitivity can be attacked in stochastic modeling, and (d) a discrete birth-death-migration model illustrates how the complex perturbation method of differential sensitivity can be generalized to a broader range of biological models. Finally, we compare the speed, accuracy, and ease of use of these methods. We find that forward mode automatic differentiation has the quickest computational time, while the complex perturbation method is the simplest to implement and the most generalizable.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Fast multiscale contrast independent preconditioners for linear elastic topology optimization problems

The goal of this work is to present a fast and viable approach for the numerical solution of the high-contrast state problems arising in topology optimization. The optimization process is iterative, and the gradients are obtained by an adjoint analysis, which requires the numerical solution of large high-contrast linear elastic problems with features spanning several length scales. The size of the discretized problems forces the utilization of iterative linear solvers with solution time dependent on the quality of the preconditioner. The lack of clear separation between the scales, as well as the high-contrast, imposes severe challenges on the standard preconditioning techniques. Thus, here we propose new methods for the high-contrast elasticity equation with performance independent of the high-contrast and the multi-scale structure of the elasticity problem. The solvers are based on two-levels domain decomposition techniques with a carefully constructed coarse level to deal with the high-contrast and multi-scale nature of the problem. The construction utilizes spectral equivalence between scalar diffusion and each displacement block of the elasticity problems and, in contrast to previous solutions proposed in the literature, is able to select the appropriate dimension of the coarse space automatically. The new methods inherit the advantages of domain decomposition techniques, such as easy parallelization and scalability. Finally, the presented numerical experiments demonstrate the excellent performance of the proposed methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

On the feasibility of using physics-informed machine learning for underground reservoir pressure management

In this work, we evaluate the feasibility of using physics-informed machine learning (PIML) for underground energy-related pressure management. To this end, we develop a PIML framework to manage underground reservoir pressures by training neural networks to determine fluid extraction rates for dedicated extraction wells during fluid injection operations given a range of reservoir conditions (e.g., transmissivity and storativity). We implement an automatically-differentiable analytical physics model of fluid flow in porous media within the PIML framework as a proxy for more complicated models. This allows us to execute a sufficient number of training scenarios to fully evaluate the feasibility of using PIML to support pressure management activities. We quantify the number of physics-model parameters required for automatic differentiation to become more efficient than finite-difference gradient calculations. We use a simple scenario with a single injector, extractor, and critical location for our feasibility analysis. We evaluate the effect of the size of the training dataset (i.e., the number of reservoir condition samples) on the accuracy and efficiency of the PIML framework. For an equivalent number of model evaluations, the larger training dataset took less time to train and produced a neural network that was able to more accurately manage reservoir pressures. We also evaluate the effect of the training dataset batch size (i.e., number of reservoir condition samples used to update the neural network coefficients during training; i.e., how the training dataset is partitioned). While training ran faster with larger batch sizes, they produced neural networks that managed pressures less accurately. We demonstrate the approach on a more complex scenario involving 10 injectors, 10 extractors, and 4 critical locations (a relatively high well density of 20 wells/km2). We provide the number of forward and adjoint model evaluations required in each case as an indication of the feasibility of using PIML for pressure management when more complicated physics models with longer execution times are used.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Group Structure Optimization Using the PyGroup Code

Group constants are used as coefficients in the energy domain discretized Linear Boltzmann Equation (LBE), in which the Continuous-Energy (CE) fluxes are also integrated over energy bins and transformed into group fluxes. This procedure, based on the Multi-Group (MG) theory, is widely applied in radiation transport and diffusion simulations Careful preparation of MG cross section data, or group constants, is thus a prerequisite for success in acquiring high-fidelity LBE solutions. Generation of MG cross section data itself is a complicated multi-step task, since group constants are indispensably coupled with the solution of the LBE, i.e. the flux spectrum in the problem to be solved. Theoretically, a MG cross section library is only valid for the problem that it is built upon. Nevertheless, in practice MG cross section libraries are prepared for similar type of problems, such as thermal reactors, fast reactors, etc., to facilitate the neutronic simulations. Generally, CE point-wise cross section data set, generated by both theoretical models and experimental data, is first converted to Fine-Group (FG) libraries using a pre-defined or precalculated flux spectra, then, Broad-Group (BG) libraries are collapsed from the fine-group libraries using problem-dependent flux spectra. Proper treatments of energy and spatial self-shielding and resonance cross section are required in the CE-to-MG converting process Previously, we have developed a computer code, YGROUP, for fine-to-broad group cross section collapsing. To maintain high accuracy of the resulting BG libraries, YGROUP provides users several options on collapsing strategies and weighting schemes for group binning and evaluation of BG cross section data in users' specific problems.. An approach based on Particle Swarm Optimization was applied to automatically determine the optimal group structure. We also developed a hybrid weighting scheme to further improve BG library performance for Special Nuclear Materials (SNM) detection applications. In this work, a new computer code, PyGroup, has been developed to implement the PSO approach with an improved simulation-driven fitness function design that includes both response and forward/adjoint flux errors. Together with YGROUP, and deterministic transport code TITAN/PENMSHXP, the PyGroup code package is tested on a Dual Range Coincident Counter (DRCC) model. In this paper, we demonstrated the capability of the PyGroup code for group structure optimization using the DRCC detector model. In the future, an iteration scheme can be implemented to determine the number of broad groups based on a user-defined tolerance. we will also apply PyGroup to more complicated reactor models, and investigate physics-based fitness function designs to further reduce computational cost. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗