Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “augmented bands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Validation and Scaling of Soil Moisture in a Semi-Arid Environment: SMAP Validation Experiment 2015 (SMAPVEX15)

The NASA SMAP (Soil Moisture Active Passive) mission conducted the SMAP Validation Experiment 2015 (SMAPVEX15) in order to support the calibration and validation activities of SMAP soil moisture data products. The main goals of the experiment were to address issues regarding the spatial disaggregation methodologies for improvement of soil moisture products and validation of the in situ measurement upscaling techniques. To support these objectives high-resolution soil moisture maps were acquired with the airborne PALS (Passive Active L-band Sensor) instrument over an area in southeast Arizona that includes the Walnut Gulch Experimental Watershed (WGEW), and intensive ground sampling was carried out to augment the permanent in situ instrumentation. The objective of the paper was to establish the correspondence and relationship between the highly heterogeneous spatial distribution of soil moisture on the ground and the coarse resolution radiometer-based soil moisture retrievals of SMAP. The high-resolution mapping conducted with PALS provided the required connection between the in situ measurements and SMAP retrievals. The in situ measurements were used to validate the PALS soil moisture acquired at 1-km resolution. Based on the information from a dense network of rain gauges in the study area, the in situ soil moisture measurements did not capture all the precipitation events accurately. That is, the PALS and SMAP soil moisture estimates responded to precipitation events detected by rain gauges, which were in some cases not detected by the in situ soil moisture sensors. It was also concluded that the spatial distribution of the soil moisture resulted from the relatively small spatial extents of the typical convective storms in this region was not completely captured with the in situ stations. After removing those cases (approximately10 of the observations) the following metrics were obtained: RMSD (root mean square difference) of0.016m3m3 and correlation of 0.83. The PALS soil moisture was also compared to SMAP and in situ soil moisture at the 36-km scale, which is the SMAP grid size for the standard product. PALS and SMAP soil moistures were found to be very similar owing to the close match of the brightness temperature measurements and the use of a common soil moisture retrieval algorithm. Spatial heterogeneity, which was identified using the high-resolution PALS soil moisture and the intensive ground sampling, also contributed to differences between the soil moisture estimates. In general, discrepancies found between the L-band soil moisture estimates and the 5-cm depth in situ measurements require methodologies to mitigate the impact on their interpretations in soil moisture validation and algorithm development. Specifically, the metrics computed for the SMAP radiometer-based soil moisture product over WGEW will include errors resulting from rainfall, particularly during the monsoon season when the spatial distribution of soil moisture is especially heterogeneous.

SMAPVEX15↗
NASA NTRS2004

Status of a UAV SAR Designed for Repeat Pass Interferometry for Deformation Measurements

Under the NASA ESTO sponsored Instrument Incubator Program we have designed a lightweight, reconfigurable polarimetric L-band SAR designed for repeat pass deformation measurements of rapidly deforming surfaces of geophysical interest such as volcanoes or earthquakes. This radar will be installed on an unmanned airborne vehicle (UAV) or a lightweight, high-altitude, and long endurance platform such as the Proteus. After a study of suitable available platforms we selected the Proteus for initial development and testing of the system. We want to control the repeat track capability of the aircraft to be within a 10 m tube to support the repeat deformation capability. We conducted tests with the Proteus using real-time GPS with sub-meter accuracy to see if pilots could fly the aircraft within the desired tube. Our results show that pilots are unable to fly the aircraft with the desired accuracy and therefore an augmented autopilot will be required to meet these objectives. Based on the Proteus flying altitude of 13.7 km (45,000 ft), we are designing a fully polarimetric L-band radar with 80 MHz bandwidth and 16 km range swath. This radar will have an active electronic beam steering antenna to achieve Doppler centroid stability that is necessary for repeat-pass interferometry (RPI). This paper will present are design criteria, current design and expected science applications.

radar↗
NASA NTRSDate not supplied

International Coordination and Cooperation on LunaNet Spectrum

LunaNet is planned to be the network of networks operated by a set of cooperating organizations to provide interoperable Communications, networking, Position, Navigation, and Timing (CPNT) services to users on and around the Moon based on a framework of mutually agreed-upon standards, protocols, frequency bands and interface requirements. LunaNet follows a service-oriented architecture that is agnostic about the types of organizations that provide services, e.g., government, industry, or academia. LunaNet is open, scalable, resilient, secure, and extensible. To achieve these goals, LunaNet Service Providers (LNSP) must coordinate with each other to define and develop the architecture, to plan initial and evolved capabilities, and to operate their networks. One of the central LunaNet tenets is the use of shared spectrum. For example, the Lunar Augmented Navigation Service (LANS) acts like a Global Navigation Satellite System (GNSS) such as the US Global Positioning System (GPS) or European Galileo but the LNSPs’ contributions to LunaNet must use the same frequency band (2483.5 MHz-2500.0 MHz) and transmit the same waveform synchronized by highly accurate clocks so that Users ‘see’ one virtual network and use the same multilateration algorithm to determine their positions. This necessitates a high degree of spectrum coordination. NASA’s Lunar and Human Spaceflight Spectrum Management Team has been actively supporting development of the LunaNet Interoperability Specification (LNIS), soliciting inputs from spectrum policy and planning experts across NASA, ESA and JAXA. Cislunar spectrum use considerations have been studied and adjudicated within the Space Frequency Coordination Group (SFCG) and inform the ongoing discussion of a lunar communication and navigation architecture within the existing radio regulatory framework of the International Telecommunication Union, leading to the 2027 World Radiocommunication Conference (WRC-27). The frequency plan contained in the publicly released draft of the LunaNet Interoperability Specification reflects the initial phase of exploration (roughly to 2030) defining an optimal set of radio frequencies in appropriately allocated services consistent with WRC-23 decisions for use by known or planned CPNT applications, while striving to maximize coexistence and compatibility amongst cislunar systems and other systems within the near-Earth regime (< 2 million km from Earth). Important considerations include: protection of extremely sensitive receive-only radio astronomy systems on the lunar far side, known as the Shielded Zone of the Moon (SZM); compatibility between Direct with Earth (DWE) communications links and links needed to support relay satellites in lunar orbit with their customer systems on orbit or on the lunar surface; compatibility between multiple lunar surface communications systems and capabilities over varied and challenging terrain and distances; as well as ensuring compatibility and interoperability between navigation systems which either leverage Earth-based or in-situ lunar systems. In addition, the lunar CPNT architecture is envisioned to be the basis – with adjustments – of the future Mars CPNT architecture as we expand into the solar system using Interplanetary Networking (IPN). The second phase of lunar spectrum definition will address planned international capabilities for the next decade that will require action at WRC-27 and beyond. This paper will discuss each of these considerations in more depth and how the current LunaNet frequency plan addresses them.

LunaNet↗
DOE OSTI2021

Wave energy resource characterization employing joint distributions in frequency-direction-time domain

Joint and marginal distributions in the frequency, direction, and time domain are employed to demonstrate their value for wave energy resource characterization when full spectra are available. Insights gained through analysis of these distributions support wave energy converter concept design, operation and maintenance. Spatial trends in the wave energy resource and contributing wave energy systems along the continental shelf of the West Coast of the United States are investigated using the most recent two-dimensional wave spectra measurements at four buoys over an eleven year period (2008 to 2018). Resource hot spots and dominant resolved energy resource bands in the frequency-direction-time domain are delineated. Resource attributes, including frequency and directional spreading, and seasonal variability, are characterized using joint distributions and marginal distributions of wave power spectra. North Pacific westerly swells in the winter season, augmented by Aleutian low-pressure southwesterly swells, are the principal suppliers of the dominant resource and main drivers influencing resource attributes. In conclusion, the modification of these systems southward, especially the North Pacific westerly swells, explains the observed spatial resource trends. The dominant resource wave period shifts two seconds to higher wave periods, thirty degrees in the dominant direction band to a more northward orientation, and forward by one month.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Tensile Property and Lifetime Prediction for Low-Temperature Aged Uranium-Niobium Alloys

Thermal aging models and lifetime predictions for uranium-niobium (U-Nb) alloys were created using an approach similar to those previously employed. Lifetime estimates for generic U-6Nb components were thus updated; the reported value being 800 years. This update represents a small change in lifetime vs. that of the 2012 assessment (540 years). This lifetime estimate emerged from consideration of several model fits specific to the aging datasets and properties chosen. Aging was quantified using quasi-static tensile properties measured on specimens artificially aged for up to 10 years. The major change relative to the most recent 2012 LANL assessment was that a more comprehensive body of U-Nb literature data was mined, in addition to being augmented by the latest LANL and UK AWE data. The tensile data compilation was published separately (LANL report LA-14493, December 2016). Recognizing the chemical banding of industrially produced U-6Nb, models were developed for the mid-range (6 wt.%) and extrema (4 and 8 wt.%) compositions. Lifetime estimates were calculated for all three alloy classes (4, 6, 8 wt.% nominal) and two measures of total tensile elongation (TE) to failure, namely TE-ext. — extensometer method, and TE-NCD — normalized crosshead displacement method. The conservative assumption was made that whichever composition (4, 6, or 8 wt.% Nb) and property (TE-ext or TE-NCD) was the first to cross the ductility failure threshold would limit the lifetime of the entire component. Tensile strength properties did not figure into the lifetime predictions, but could be useful as age-sensitive diagnostics and were also modeled. Of these, only first yield strength is expected to show a change at 40°C aging vs. time = 0 over the ~100-year timespan of engineering interest. Second yield strength evolves more slowly, and ultimate tensile strength slower still. Among all the models, the apparent activation energies for aging were mostly in the narrow 29– 37 kcal/mol range, which is close to that for diffusion of Nb in gamma-uranium. This agreement may be coincidental. The data from recent long-term aging studies substantially improved the model fit quality and robustness of the lifetimes. Appendices document sensitivity studies of the model fits and lifetimes with respect to using more limited datasets. These results highlight the limitations of relying solely on data from scattered literature studies and smaller datasets more generally.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Optimization of the lithium/thionyl chloride battery

The progress which has been made in modeling the lithium/thionyl chloride cell over the past year and proposed research for the coming year are discussed. A one-dimensional mathematical model for a lithium/thionyl chloride cell has been developed and used to investigate methods of improving cell performance. During the course of the work a problem was detected with the banded solver being used. It was replaced with one more reliable. Future work may take one of two directions. The one-dimensional model could be augmented to include additional features and to investigate in more detail the cell temperature behavior, or a simplified two-dimensional model for the spirally wound design of this battery could be developed to investigate the heat flow within the cell.

White, Ralph E.↗
NASA NTRS1977

Early performance of the 12-GHz, 200-watt transmitter experiment package in the communications technology satellite

Measured performance characteristics of the transmitter experiment package (TEP) aboard the Communications Technology Satellite for the first 90 operating days in orbit are presented. The TEP consists of a nominal 200-watt output stage tube (OST), a supporting power processing system (PPS), and a variable-conductance heat pipe system (VCHPS). The OST, a traveling-wave tube augmented with a 10-stage depressed collector, has an overall saturated average efficiency of 51.5 percent and an average saturated radiofrequency (RF) output power at center-band frequency of 240 watts. The PPS operated with a measured efficiency of 86.5 percent to 88.5 percent. The VCHPS, using three pipes to conduct heat from the PPS and the body of the OST to a 52-centimeter by 124-centimeter (20.5-in. by 48.75-in.) radiator fin, maintained by the PPS baseplate temperature below 50 C for all operating conditions. The TEP performance characteristics presented include frequency response, RF output power, efficiency, and distortions. Communications characteristics were evaluated by using both video and audio modulated signals.

Source record↗
NASA NTRS1979

Life characteristics assessment of the communications technology satellite transmitter experiment package

The performance characteristics of the transmitter experiment package (TEP) aboard the Communications Technology Satellite (CTS) measured during its first 2 years in orbit are presented. The TEP consists of a nominal 200 watt output stage tube (OST), a supporting power processing system (PPS), and a variable conductance heat pipe system (VCHPS). The OST, a traveling wave tube augmented with a 10 stage depressed collector has an overall saturated average efficiency of 51.5 percent and an average saturated radio frequency (rf) output power at center band frequency of 240 watts. The PPS operated with a measured efficiency of 86.5 to 88.5 percent. The VCHPS, using three pipes to conduct heat from the PPS and the OST to a 52 by 124 centimeter radiator fin, maintained the PPS baseplate temperature below 50 C for all operating conditions. The TEP performance characteristics presented include frequency response, rf output power, thermal performance, and efficiency. Communications characteristics were evaluated by using both video and audio modulated signals. On four occasions, the TEP experienced temporary thermal control system malfunctions. The anomalies were terminated safely, and the problem was investigated because of the potential for TEP damage due to the signficant temperature increases. Safe TEP operating procedures were established.

Smetana, J.↗
NASA NTRS1983

International Geoscience and Remote Sensing Symposium, Universitaet Muenchen, Munich, West Germany, June 1-4, 1982, Proceedings

The present conference on geoscience and remote sensing considers the multispectral remote sensing of saline seeps, the augmentation of LANDSAT MSS data with topographic data, thematic mapping, the sampling problem in radiation budget studies, aerial conductivity measurements over geothermal areas, a comparison of multifrequency band radars for crop classification, the improved estimation of vegetation-covered soil by combined active/passive microwave remote sensing, and atmospheric water vapor profiling by ground-based radiometry. Also discussed are SAR imaging from an inclined geosynchronous orbit, the classification of agricultural crops in radar images, the Ocean Color Experiment on the second orbital flight test of the Space Shuttle, the dielectric properties of wet materials, remote sensing systems for the mm-wave region, and the simulation of spaceborne stereo radar imagery.

Seiber, A. J.↗
NASA NTRS1992

Classification Of Land Cover From Airborne MSS Data

Method for processing images of rural uplands produced by airborne multispectral scanner (MSS), semiautomatically classifies types of land cover, and involves selection of wavelength bands, radiometric calibration, correction for effects of scan angle and atmosphere, training, and assessment of accuracy. Basic version involves classification of each picture element according to spectrum. Augmented with five refinements to increase accuracy: per-field sampling; low-pass filtering; image texture; prior probabilities; and imagery from two dates.

Curran, Paul J.↗
DOE OSTI2023

Statistical moments of VIIRS night-time lights

Annual VIIRS global night-time lights traditionally report mean radiance levels after filtering to remove moonlit and cloudy data followed by outlier removal. The mean is the first statistical moment, but there are three other statistical moments (variance, skew and kurtosis) that are currently not produced globally. In this study, we generated VIIRS day/night band multiyear and annual statistical moments for a widely dispersed set of test areas. The moments were calculated from 15 arc second nightly temporal profiles spanning 2012-2020, filtered to exclude cloudy and sunlit data, with radiance adjustments to reduce view angle and lunar illuminance effects. The moment data were examined in two ways: (1) Geospatial grids-which reveal zonation and temporal changes present in urban areas and (2) Scattergrams of moment pairs. The variance versus mean scattergram exhibits several distinct data clusters used to define five zones: core lighting, dark-erratics, mid-erratics, bright-erratics and bright and seteady. The results indicate that the information content of VIIRS night-time lights can be augmented if all four statistical moments are calculated.

47 OTHER INSTRUMENTATION↗
NASA NTRS1984

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 1: Executive summary

Distributed processing in the design and operation of the augmented TDRSS and the succeeding TDAS in the 1990's is discussed with the emphasis on the development of the autonomous integrated receive system (AIRS) for the operation of the S-band single access (SSA) return link in the White Sands ground terminal. This receive system has the capability of self configuration, real-time operation, and self diagnostic. The tasks of Doppler correction, demodulation, detection, and decoding are performed in an integrated manner where useful information are shared and used by ALL portions of AIRS performing these tasks. Operating modes, maintenance, system architecture, and performance characteristics are described.

Chie, C. M.↗
NASA NTRSDate not supplied

Multispectral Imagery Research and Applications

The NASA Short-term Prediction Research and Transition (SPoRT) Center developed techniques to improve the quality and interpretation of multispectral imagery derived from NASA/NOAA geostationary satellites using statistical and machine learning approaches. A physically-based machine learning approach, DustTracker-AI, was developed to overcome the problem of night-time dust detection and to augment dust analysis with satellite products such as the Dust RGB. Additionally, an updated limb-correction and intercalibration methodology for short-wave, near-infrared, thermal infrared, and water vapor bands was developed for the purpose of developing a suite of high-quality RGB imagery that can be used at high viewing angles and across the constellation of geostationary sensors. This presentation will briefly highlight the techniques developed to detect dust in difficult night-time scenes and improve the quality and interpretation of multispectral imagery.

Emily Berndt↗
NASA NTRS1999

Constitutive and Stability Behavior of Granular Materials Under Very Low Effective Stresses

The study of the behavior of granular materials such as sand is of great importance to the understanding of the response of foundations resting on surface and near-surface soil deposits. A clear understanding of the behavior of such materials can also provide insights into other related issues where low effective stresses are encountered such as liquefaction. The main sources of the constitutive and stability properties of cohesionless granular materials is interparticle friction, which in turn under low confinement stress levels is strongly affected by gravitational body forces under terrestrial (1 gravity) conditions. Under moderate-to-high stress levels, the influence of gravity on the behavior of experiments may not be pronounced and therefore the test results in a terrestrial environment may be acceptable for engineering purposes. However, the conduct of experiments on granular materials under very low stress levels and under quasi-static conditions can only be performed in a microgravity environment. A series of displacement-controlled cyclic triaxial compression experiments were performed in a SPACEHAB module on the Space Shuttle during the STS-79 mission to Mir in September, 1996, and the STS-89 mission in January, 1998. The experiments were conducted on six right cylindrical specimens 75 mm in diameter and 150 mm long at effective confining pressures of 0.05, 0.52 and 1.30 kPa. The results show very high peak strength friction angles in the range of 47.6 to 70.0 degrees, which are mainly due to overconsolidation and grain interlocking effects. It was observed that the residual strength levels were in the same range as that observed at higher confining stress levels. The dilatancy angles were unusually high in the range of 30 to 31 degrees. All specimens display substantial initial stiffnesses and elastic moduli during unloading and reloading events, which are nearly an order of magnitude higher than conventional theories predict. A periodic instability phenomenon which appears to result from buckling of multiple internal arches and columnar systems, augmented by stick-slips was observed in the experiments. Computed Tomography (CT) measurements revealed valuable data about the internal fabric and the specimens deformation patterns. Uniform diffuse bifurcation with multiple radial shear bands was observed in the specimens tested in a microgravity environment. In the axial direction, two major conical surfaces were developed. Spatial nonsymmetrical deformations were observed in specimens tested in terrestrial laboratory.

Alshibli, Khalid A.↗
NASA NTRS1998

Mechanics of Granular Materials (MGM) Microgravity Experiment

The second series of MGM experiment was conducted during the STS-89 mission in January 1998. The experiment was previously flow on Atlantis's STS-79 mission in September 1996. Six displacement-controlled, drained triaxial compression experiments were performed at very low effective confining stresses. The confining stresses were in the ranges 0.05, 0.52 and 1.30 kPa. Three experiments were subjected to monotonic loading and unloading cycles while the other three experiments were subjected to cyclic loading. The results show very high peak strength friction angles in the range of 47.6 to 70.0 degrees, which are mainly due to overconsolidation and grain interlocking effects. It was observed that the residual strength levels in the monotonic loading experiments were in the same range as that observed at higher confining stress levels. The dilatancy angles were unusually high in the range of 30 to 31 degrees. All specimens display substantial initial stiffnesses and elastic moduli during unloading and reloading events, which are nearly an order of magnitude higher than conventional theories predict. A periodic instability phenomenon which appears to result from buckling of multiple internal arches and columnar systems, augmented by stick-slips was observed in the experiments. Computed Tomography (CT) measurements revealed valuable data about the internal fabric and the specimens deformation patterns. Uniform diffuse bifurcation with multiple radial shear bands was observed in the specimens tested in a microgravity environment. In the axial direction, two major conical surfaces were developed. Spatial nonsymmetrical deformations were observed in specimens tested in terrestrial laboratory.

Alshibli, Khalid A.↗
NASA NTRS2021

SMAP Validation Experiment 2019-2021 (SMAPVEX19-21): Detection of Soil Moisture Under Temperate Forest Canopy

The retrieval of soil moisture under forest canopy has long been an important goal for low frequency remote sensing. The NASA mission started a dedicated field experiment in May 2019 by deploying two temporary soil moisture networks in northeast US that cover two separate SMAP pixels with variable degree of forest cover. The measurements will be augmented with two intensive observation periods (IOP). The first IOP is planned for July and the other one for October. The IOPs will see deployment of the airborne PALS (Passive Active L-band sensor) instrument, which is similar to the SMAP instrument, and intensive manual measurements of soil moisture and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. The early results have shown that the SMAP measurement signal at L-band is sensitive to soil moisture changes observed on the ground.

Yueh, Simon H.↗
DOE OSTI2023

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
NASA NTRS2007

TDRSS Augmentation for Launch and Ascent High Speed Navigation Filter

An investigation was performed to evaluate the feasibility and possible advantages of augmenting the High Speed Trajectory Determination (HSTD) ground navigation filter with measurements from the Tracking & Data Relay Satellite System (TDRSS) constellation. The proposed communications system strategy for Constellation uses TDRSS rather than ground S-band, so the capability of replacing the S-band navigation capability with TDRSS was considered. HSTD simulations were performed with combinations of S-band, C-band, and TDRSS measurements. Several assumptions are made with regard to measurement biases and signal noise characteristics to produce first-look level accuracies. Preliminary results show that solutions using TDRSS instead of S-band have similar or improved performance from the view of filter covariance and may be a feasible alternative. These results also show that TDRSS tracking alone gives poorer observations and resulting performance Operational and other constraints to the use of TDRSS in a high-speed ground navigation filter are not addressed.

Holt, Greg .↗