Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “arms control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Motion control of 7-DOF arms - The configuration control approach

Graphics simulation and real-time implementation of configuration control schemes for a redundant 7-DOF Robotics Research arm are described. The arm kinematics and motion control schemes are described briefly. This is followed by a description of a graphics simulation environment for 7-DOF arm control on the Silicon Graphics IRIS Workstation. Computer simulation results are presented to demonstrate elbow control, collision avoidance, and optimal joint movement as redundancy resolution goals. The laboratory setup for experimental validation of motion control of the 7-DOF Robotics Research arm is then described. The configuration control approach is implemented on a Motorola-68020/VME-bus-based real-time controller, with elbow positioning for redundancy resolution. Experimental results demonstrate the efficacy of configuration control for real-time control.

Seraji, Homayoun↗
NASA NTRS1986

Anthropometric considerations for a 4-axis side-arm flight controller

A data base on multiaxis side-arm flight controls was generated. The rapid advances in fly-by-light technology, automatic stability systems, and onboard computers have combined to create flexible flight control systems which could reduce the workload imposed on the operator by complex new equipment. This side-arm flight controller combines four controls into one unit and should simplify the pilot's task. However, the use of a multiaxis side-arm flight controller without complete cockpit integration may tend to increase the pilot's workload.

Debellis, W. B.↗
NASA NTRS1999

Fuel control system for an engine

A fuel control system responsive to a power controller and controlling a fuel delivery system. The fuel control system includes a control arm connected to both the power controller and the fuel delivery system, a position sensor connected to the control arm, and a trim controller connected to the control arm at a pivot point and connected to the position sensor.

Brogdon, James William↗
NASA NTRS1987

Robot-Arm Dynamic Control by Computer

Feedforward and feedback schemes linearize responses to control inputs. Method for control of robot arm based on computed nonlinear feedback and state tranformations to linearize system and decouple robot end-effector motions along each of cartesian axes augmented with optimal scheme for correction of errors in workspace. Major new feature of control method is: optimal error-correction loop directly operates on task level and not on joint-servocontrol level.

Bejczy, Antal K.↗
NASA NTRS1988

Robot arm force control through system linearization by nonlinear feedback

Based on a differential geometric feedback linearization technique for nonlinear time-varying systems, a dynamic force control method for robot arms is developed. It uses active force-moment measurements at the robot wrist. The controller design fully incorporate the robot-arm dynamics and is so general that it can be reduced to pure position control, hybrid position/force control, pure force control. The controller design is independent of the tasks to be performed. Computer simulations show that the controller improves the position error by a factor of ten in cases in which position errors generate force measurements. A theorem on linearization of time-varying system is also presented.

Tarn, T. J.↗
NASA NTRS1986

Task driven feedback control of robot arms - A step toward intelligent control

The process of connecting task descriptions originating from machine intelligence planning programs to the mechanization of feedback control of robot arms is analyzed. It is shown in this paper that control theories and practices can be extended to a higher level where feedback control of robot arms directly can respond to work space task commands provided that the work space task as a command is given in the form of a closed function of time. A general mathematical procedure using tools from differential geometry is introduced for synthesizing task space motion planning so that the planned motion can be used as a direct input to the robot arm feedback control system to achieve desired robot hand motion. By definition, 'intelligent control' is being manifested through robot performance in the task space relative to task space commands. Thus, the capability of implementing feedback control of robot arms directly driven by appropriate task descriptions in the workspace as commands is a step toward intelligent control.

Bejczy, A. K.↗
NASA NTRS1986

Two-Arm-Manipulator Controller

Shoulder harness allows wearer to control simultaneously and independently two remote manipulator arms and end effectors. Each manipulator arm would have 7 degrees of freedom. Two arm mechanisms of controller moved by operator's arms and hands. Remote manipulator, located elsewhere, responds to operator's arm and hand movements. Adjustable shoulder straps, waist belt, and leg straps hold harness securely on wearer. Mechanisms and harness allow operator to reach almost normally at control station.

Coryell, S.↗
DOE OSTI2024

Formal Methods for Provably Secure Software and Firmware

This project addresses a gap observed in verifying the programming in embedded devices used in international arms control: namely verifying that embedded programming in an arms control device does exactly what it is supposed to do, no more and no less, every time without fail, and without disclosing unauthorized information accidentally or intentionally. In critical military, aerospace, and industrial safety systems this problem is sometimes addressed using formal methods (FM). This multi-year project seeks to identify formal methods toolsets useable in arms control regimes, with emphasis on applicability, ease of use, long term availability, and support.

formal methods, Arms Control Verification↗
NASA NTRS1988

The WCSAR telerobotics test bed

Component technologies for use in telerobotic systems for space are being developed. As part of this effort, a test bed was established in which these technologies can be verified and integrated into telerobotic systems. The facility consists of two slave industrial robots, an articulated master arm controller, a cartesian coordinate master arm controller, and a variety of sensors, displays and stimulators for feedback to human operators. The controller of one of the slave robots remains in its commercial state, while the controller of the other robot has been replaced with a new controller that achieves high-performance in telerobotic operating modes. A dexterous slave hand which consists of two fingers and a thumb is being developed, along with a number of force-reflecting and non-force reflecting master hands, wrists and arms. A tactile sensing finger tip based on piezo-film technology has been developed, along with tactile stimulators and CAD-based displays for sensory feedback and sensory substitution. The telerobotics test bed and its component technologies are described, as well as the integration of these component technologies into telerobotic systems, and their performance in conjunction with human operators.

Duffie, N.↗
NASA NTRS1986

Rigid/Compliant Helicopter Rotor

Rotor structure ensures both effective aerodynamic support and efficient pitch changes. Four blades are shells with rigid inner I-beam arms integrated with rotor hub. Through each blade, control arm extends from pitch-control actuator in hub. Elastomeric bearings allow control arms to twist blades and thus change blade pitch without turning I-beam arms. Centrifugal force carried by tension strap. Leading and lagging movements of blades restrained by dampers. Ducts inside leading and trailing edges of blade shells carry air for partial cyclic aerodynamic control of lift and pitch. Structure permits more efficient pitch control with less weight. At same time, improves reliability through redundancy in supports and control mechanisms.

Jeffery, P.↗
NASA NTRS1985

Dual arm master controller development

The advanced servomanipulator (ASM) slave was designed with an anthropomorphic stance gear/torque tube power drives, and modular construction. These features resulted in increased inertia, friction, and backlash relative to tape driven manipulators. Studies were performed which addressed to human factor design and performance tradeoffs associated with the corresponding master controller best suited for the ASM. The results of these studies, as well as the conceptual design of the dual arm master controller, are presented.

Kuban, D. P.↗
DOE OSTI2020

Overview of the U.S.-U.K. Portal Monitor for Authentication and Certification (PMAC) Project [Slides]

The PM designed and demonstrated under the PMAC project is a significant improvement from other existing PMs in terms of the joint host / inspector confidence provided and usability in a future hypothetical arms control regime. Based on these results, the PMAC system would be the best option currently available for a boundary control use case in a hypothetical arms control regime.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2020

Verifying Deep Reductions in the Nuclear Arsenals: Development and Demonstration of a Motion-detection Subsystem for a “Buddy Tag” Using Non-export Controlled Accelerometers

Future nuclear arms-control agreements may place numerical limits on items that are difficult to monitor with national technical means, even when complemented with onsite inspections. Such items could include small objects and mobile assets, such as non-deployed nuclear warheads and mobile missile launchers. Typically, this verification task can be addressed with unique identifiers, but standard tagging techniques may be unacceptable in this case due to host concerns about safety and intrusiveness. First proposed in the late 1980s and partially developed by Sandia National Laboratories in the early 1990s, the “Proximity Tag” or “Buddy Tag” concept seeks to overcome these concerns by separating the tag from the treaty accountable item itself. A buddy tag has two key elements: a tamper-indicating enclosure and a motion-detection system designed to detect illicit movements in a stand-down period. As part of this project, we have built a buddy-tag prototype for demonstration and evaluation purposes. This paper reviews the design choices and functionalities of the tag’s motion-detection subsystem.We pursue a modular approach for the tag’s hardware, built around an Arduino-class microcontroller and a non-export-controlled low-noise accelerometer, and use open-source algorithms for the motion-detection software. Finally, we discuss the results of an extensive experimental campaign involving both indoor and outdoor measurements assessing the performance of the tag under real-world environmental conditions.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS1966

Hydraulically controlled flexible arm can bend in any direction

Arm assembly consisting of four flexible tubes controlled by a four-way hydraulic or pneumatic valve can bend in any direction. The flexible arm could be used for probing areas that cannot be reached by ordinary tools, handling hazardous materials, and for graph recording.

Griffin, F. D.↗
DOE OSTI2020

Technical Cooperation on Verification and its role in Trust Building [Slides]

Technical cooperation is a low-cost way to initiate movement in the arms control sphere and offers an operational path forward for the reestablishment of working relationships built on trust not freely given, but gained through experience, and a shared vision of the future; Political will alone, though necessary for cooperation to take place, is insufficient in the face of structural obstacles. For effective cooperation to have a future, countries must have both political will and complementary and conducive institutional structures; Cooperation at the intergovernmental level seems unlikely at this time. However, if relationships with international partners continue to be strained as development of new offensive technologies continues, it is very possible that future movement in technical arms control cooperation could again be initiated in the nongovernmental sphere; As the stewards of the majority of the world’s nuclear stockpile, the United States and the Russian Federation have a unique role to play in shaping global norms on arms control verification and cooperation; it is in their mutual interest now to begin to find technical solutions to the question of verification as other countries ramp up production.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS1984

The structures and the role of an international agency for the control of satellites

Legal questions involved in the liability of a proposed agency which would control internationally owned satellites for monitoring worldwide compliance with arms control agreements are discussed. Difficulties in acquiring the signed consent of all the relevant nations, and guaranteeing satisfactory compliance with the terms of such an agreement are noted. Additional problems to be solved comprise the construction of the ground based facilities and the satellites, the funding for the venture, and the reconciliation of the functions of the proposed agency with the sovereignty of individual states. The agency would gather, treat, and format data for signatories of arms control agreements and provide technical assistance in crisis conditions. It is concluded that the existence and functioning of the agency would reduce the amount of classified information and would consequently reduce the level of international tensions.

Dupuy, R. J.↗
NASA NTRS1989

Adaptive Strategies for Controls of Flexible Arms

An adaptive controller for a modern manipulator has been designed based on asymptotical stability via the Lyapunov criterion with the output error between the system and a reference model used as the actuating control signal. Computer simulations were carried out to test the design. The combination of the adaptive controller and a system vibration and mode shape estimator show that the flexible arm should move along a pre-defined trajectory with high-speed motion and fast vibration setting time. An existing computer-controlled prototype two link manipulator, RALF (Robotic Arm, Large Flexible), with a parallel mechanism driven by hydraulic actuators was used to verify the mathematical analysis. The experimental results illustrate that assumed modes found from finite element techniques can be used to derive the equations of motion with acceptable accuracy. The robust adaptive (modal) control is implemented to compensate for unmodelled modes and nonlinearities and is compared with the joint feedback control in additional experiments. Preliminary results show promise for the experimental control algorithm.

Yuan, Bau-San↗
NASA NTRS1989

A general dynamic model of flexible robot arms for control

Hamilton's principle is used to derive the dynamic model for a large class of flexible robot arms. The resultant dynamic model consists of a system of partial differential-integral equations and the dynamic boundary conditions associated with it. Some properties of the model are observed, and its application to control is discussed. This model represents an infinite-dimensional nonlinear dynamic system and yet can be turned into a finite-dimensional system that could be obtained by modal expansion, if it is desired. This provides more flexibility for control purposes as well as for the analysis of the system.

Ding, X.↗